The core to plot manually entered pressures without any sample data did
the obvious thing: it ended the pressures at the end of the dive as
indicated by the last sample.
However, that obvious thing didn't actually work, because sometimes the
last sample is long long after the dive has actually ended, and we have
no plot_info data for that.
This depends on the dive computer used: most dive computers will not
report samples after the end (even if they may internally remember them
in case the diver just came up to the surface temporarily), but some
definitely do. The OSTC3 is a prime example of that.
Anyway, the code was fragile and wrong - even if passed a time past the
end of the plot_info data, "add_plot_pressure()" should just have
associated that with the last entry instead. Which also allows us to
simplify the whole endtime logic entirely, and just use INT_MAX for it.
Gaetan Bisson's test-case also showed another oddity: we would plot the
gas pressure even for cylinders that had no has use (ie beginning and
ending pressures were the same). That's kind of pointless in so many
ways. So limit the manual pressure population to cylinders that
actually have seen use.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Google Maps API V3 *does* require a key if one needs to generate
a lot of payed trafic and monitor said trafic, otherwise it doesn't:
https://stackoverflow.com/a/8785844
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The creation of a cloud account from mobile was broken. This fixes
it. Basically, we need to go online for a moment, and setup a correct
local and remote repo for the cloud storage.
Tested for the following scenarios: 1) inital account creation
including PIN handling from mobile, from a clean install .
2) open an already validated cloud account from a clean install.
3) open no-cloud style local account.
4) Switch between 2 already validated could accounts.
5) Try to create a cloud account without data connection.
Notice that scenario 4) does not work perfectly. A restart of
the app is needed to see the new logbook. So that is to be fixed.
Scenario 5) seems a non realistic corner case. This does not work
in a gracefull way. The user needs to remove the app, install it
again, and retry with data connection.
Further notice this is backgroud/core processing only. So no QML UI
changes as proposed (for example) bij Davide.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The PIN (and cloud account creation) is not limited to the
desktop (any more). Correct the string accordingly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Just to be sure. Use the same version on Android build of libgit2
as used in the scripts/build.sh script.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
strstr is a case sensitive compare and the string reported from
libgit2 reads "reference" and not "Reference". Further investigation
reveals commit 909d5494368a0080 of libgit2. Here, the change is
made from Reference to reference, breaking our rather poor way
of detecting something from an error string. So, to be future-proof
to more libgit2 oddities, it might be wise to use strcasestr
in this situation. But this seems a not fully supported variant of
strstr, so leave it at this point.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
I thought we had this automated, but Lubomirs commits introduced a few
files with dos line endings. This is purely a change of line endings, no
other changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The other pressure sensors were disabled on import because we didn't use
to handle multiple sensors well at all.
Now it "JustWorks(tm)".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"If it hasn't been tested, it doesn't work".
All my testing of the multiple sensor pressures have been with some
reasonably "interesting" dives: they actually *have* sensor pressures.
But that test coverage means that I missed the truly trivial case of
just having manual pressures for a single cylinder.
Because there's only a single cylinder, it doesn't have any cylinder
changes, and because there were no cylinder changes, it never filled in
the use range for that cylinder.
So then it never showed the pressure profile at all.
Duh.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The momentary SAC rate got broken by the multiple ressure handling too,
and always used just the first cylinder.
This uses the new "get_gasmix()" helper to see what you're breathing,
and will do the SAC rate over all the cylinders that contain that gas.
So it should now DTRT even for sidemount diving (assuming you had the
same gas in the sidemount cylinders).
NOTE! We could just do the SAC rate over *all* the gases you have
pressures for, and maybe that's the right thing to do. The ones you are
not breating from shouldn't have their pressure change. But maybe some
people add their drysuit argon gas to the gas list?
So this may need more work, but it's a step in the right direction.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit e1b880f4 "Profile support for multiple concurrent pressure
sensors" I had mindlessly hacked away at some of the sensor lookups from
the plot entries to make it all build, and forgotten about my butchery.
Thankfully Jan and Davide noticed in their multi-cylinder deco dives
that the deco calculations were no longer correct.
This uses the newly introduced "get_gasmix()" helper to look up the
currently breathing gasmix, and fixes the deco calculations.
Reported-and-tested-by: Jan Mulder <jlmulder@xs4all.nl>
Reported-by: Davide DB <dbdavide@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have a few places that used to get the gasmix by looking at the
sensor index in the plot data, which really doesn't work any more.
To make it easier for those users to convert to the new world order,
this adds a "get_gasmix()" function. The gasmix function takes as its
argument the dive, the dive computer, and the time.
In addition, for good performance (to avoid looping over the event list
over and over and over again) it maintains a pointer to the next gas
switch event, and the previous gas. Those need to be initialized to
NULL by the caller, so the standard use-case pattern basically looks
like this:
struct gasmix *gasmix = NULL;
struct event *ev = NULL;
loop over samples or plot events in increasing time order: {
...
gasmix = get_gasmix(dive, dc, time, &ev, gasmix);
...
}
and then you can see what the currently breathing gas is at that time.
If for some reason you need to walk backwards in time, you can just pass
in a NULL gasmix again, which will reset the event iterator (at the cost
of now having to walk all the events again).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A user reports a SIGSEGV that points to DownloadFromDCWidget::updateProgressBar()
in relation to strlen()/strdup(), at end of download. Reading the code, as I
can't reproduce the crash, it seems that the progress_bar_text is set to NULL
and later strdup-ped. The man page is not fully clear on this, but setting it
to the empty strings is much safer.
Might fix: #507
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The C++ side for the desktop version already does that. Add a slot
for that in QML, for later use in the mobile version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The editing support is added via dragging. It is handled via the
MouseArea's drag.target of the MapQuickItem. The drag target changes
with the model selectedUuid.
"mapAnimationZoomIn" now also does an initial zoom-out before moving
to a new location.
centerOnCoordinate() now pefroms calculations to determine how much
the animation needs to zoom out. What it does is it reduces the Map
zoomLevel util both the current and the new target coordinates are visible.
It then restores the zoomLevel and performs animation based on newZoomOut.
animateMapZoomIn() is now obsolete.
The patch also includes the following smaller changes:
- remove the setSelectedUuid() call in deselectMapLocation()
This is now handled in C++
- sets "defaultZoomIn" to 12.0
- use ">=" when determining if a mapItem text should be visible
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapWidgetHelper QML instance now has the slot onEditModeChanged()
which toggles the visiblity of a newly added message box that
notifies the user if editing mode is enabled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The local slot coordinatesChangedLocal() tracks the MapWidgetHelper
coordinatesChanged() signal and emit a coordinatesChanged() signal
to any listeners (e.g. MainWindow).
Also add a small change in centerOnDiveSite(), to not be called if
we are skipping the reload (skipReload is updated by
selectedDivesChanged()).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
updateCurrentDiveSiteCoordinates() should be called from
QML when a marker changed it's location. it emits the coordinatesChanged()
signal, which should be tracked in the MapWidget class. The MapWidget
class should emit the same signal to the MainWindow (Marble does that).
editMode is now a boolean property, which should put the QML map into
editing mode.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The marble globe tracks dive sites with the same name and discards
such that are less than 50 meters apart.
We already store names in MapLocation objects, but using a
QMap<QString, MapLocation *> to check the names is probably faster
with the expense of using more memory.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Call setSelectedUuid() from C++ also center on coodinates instead
on a MapLocation, as there is no point to pass the MapLocation object
back to QML.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
getRole() returns a QVariant and the cast is a small overhead.
Using these helpers will reduce the overhead.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapItemView delegate now includes a white Text element.
It uses the MapLocation "name" property as text.
This text is only visible if the map zoom is above "textVisibleZoom".
For hundreds of dives, using the DropShadow effect for the text
makes it laggy. Instead, using a fake drop shadow (duplicate black
Text under the default text) makes it much better.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapLocation QObject now has a QString property "name", which is
translating the dive_site->name member.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The buttons are positioned bellow the "toggle map type" button
and increment / decrement the zoom by "zoomStep" (2 for now).
Also clamp the zoom-in level to "map.maximumZoomLevel".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Double clicking a marker or the newly added MouseArea now performs
a +2 zoom-in over a period of 500ms and centers on that clicked
coordinate.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
