exportFunc was a collections of functions for exporting dive data.
It had no state, therefore there is no reason for it to ever be
instantiated.
Simply remove the class. Rename the saveProfile function to
exportProfile so that all export functions start with "export".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When exporting dives we show a message. The message is closed when
the export is finished. This is coordinated by a QFuture. Instead
of keeping a global QFuture in the export-code, pass it around
as a local variable.
This is supported according to Qt's documentation:
"QFuture is a lightweight reference counted class that can be
passed by value." and the source code indicates the same.
Not only does this remove a global, it also makes the code
more flexible: Now we could show one notification per export,
for example.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Usually, we use PascalCase (i.e. camelCase with a capital
letter at the start) for class names. For consistency, let's
do it here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This class contains only static functions (i.e. it does not contain
any state). There does not seem to be a reason to have an instance
of that class. Therefore, remove the instance() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were quite a few issues with the code - clearly a complete failure of
code review.
- all values were '??' if a period contained no dives
- imperial units were not calculated at all
- significant truncation and data loss in the way totals were added as meters
and minutes instead of the higher precision data that is available
- several issues in striing conversion methodology, e.g. missing zero padding
for minutes
- missing maxSac
- incorrectly calculated avgSac
- incorrectly claculated number of EANx dives
- hard to read code with most variables named 'temp'
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create DiveSummary class in backend-shared and make the DiveSummary calculation
results available to QML.
This adds a loop over all dives (could have been done with a model, but the
models available to mobile are very limited, so use the basic way).
[Dirk Hohndel: renamed the results variable and combined a couple of commits]
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some case the scaling (real value <-> UI value) is different
for mobile and desktop. In order to make the difference understandable
comments are added to each function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove comment that was very false (next line contradicted the comment).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setBottomSac, setDecoSac and setFactor in diveplannermodel
receives display value which are then converted.
subsurface-mobile have slightly different values, move the
correction of these from plannershared to diveplannermodel, in
order to keep the whole convert in one place.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove Q_PROPERTY and signals from plannershared, since they are
no longer used (transferred to qmlinterface).
Unregister object plannershared, since it is no longer used in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add surface_segment to plannerShared and then
update desktop-widgets.
Signed-off-by: jan Iversen <jan@casacondor.com>
desktop-widgets: use plannerShared for surface_segment
Change getter/setter for surface_segment to plannerShared, in
order to share the conversion with mobile diveplanner
Signed-off-by: jan Iversen <jan@casacondor.com>
The real values are 1.0 to 10.0, but QML needs int so mobile
gets values 10.0 to 100.0
add sacfactor() to QMLInterface and update QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Move conversion cuft <-> liter from desktop-widget/diveplanner.cpp
to plannerShared, to facilitate the same results in mobile
diveplanner
Use Backend for bottomsac/decosac and update to check
for switch LITER <-> CUFT
Add bottomsac/decosac to QMLinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Variables without conversion, do not need to pass plannerShared
(due to the QML interface).
Simple variables do not pass plannerShared, but diveplanner
in desktop-widgets and qmlinterface in mobile-widgets call the
implementation directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
Length variables are updated from the QML and desktop directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make notes rates available to QML through the Backend interface.
Remove the corresponding variables from plannerShared.
Getters are from prefs. while setters are linked to diveplan model.
Remark: signals from qPrefDivePlanner is used, because the diveplanner model
sets qPrefDivePlanner but do not issue special signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ascent/Descent rate functions are fully implemented in diveplannermodel,
therefore remove these functions.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows to update plannermodel etc. and thus avoiding a restart when
changing units for length.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Test show that the ratings calculations were off by +/- 1, due
to rounding errors. Found due to test cases in tests (other commits)
The calculations are copied 1-1 from diveplanner.cpp, but are
used slightly different in plannerShared.cpp
Correct calculations, by securing the calculation is done
with float precision and the rounded with lrint().
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add
display_runtime
display_duration
display_transitions
verbatim_plan
display_variations
Get is direct from qPrefDivePlanner and set is plannerModel
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use plannerShared setter to update o2narcotic. This will also signal
the cylindermodel to calculate a new bestmix.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add include of cylinderModel
Add o2narcotic
the set function is special because it first
informs the plannerModel that there is a new value
and then ask cylindermodel to calculate a new bestmix
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
bottomsac
decosac
problemsolvingtime
sacfactor
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner and converted
Variables:
min_switch_duration
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are simple pass-through functions (normally optimized away
by the compiler), and serve to make a consistent backend interface
which have a simpler use especially in QML.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
drop_stone_mode
last_stop
switch_at_req_stop
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are simple pass-through functions (normally optimized away
by the compiler), and serve to make a consistent backend interface
which have a simpler use especially in QML.
Variables:
dobailout
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
planner_deco_mode
reserveGas
safetyStop
gflow
gfhigh
vpmb_conservatism
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
WARNING: multi directory commit, needed to secure it builds.
move the core/plannerShared.* to backend-shared.
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
WARNING: multi directory commit, needed to secure it builds.
move the core/exportfuncs.* to backend-shared.
update backend-shared/CMakeLists.txt to generate backend-shared lib
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
WARNING: multi directory commit, needed to secure it builds.
leaving the shared backend sources in core, imposes a severe limitation,
that they cannot make use of e.g. qt-models, because that is created
after core (first library to be created).
The shared backend uses functionality from core and qt-models, so it
must be created when those are available and before desktop-widgets
or mobile-widgets are created.
Make a new root directory "backend-shared" with empty CMakeLists.txt
Signed-off-by: Jan Iversen <jan@casacondor.com>
