Fix a bug causing the wrong units (m) to be shown on the Dive site
management view if imperial units are as the system default.
Signed-off-by: Michael Keller <github@ike.ch>
Disable the 'search dive computer' ([...]]) button in the 'Import from
dive computer' window if searching is not supported by the currently
selected vendor.
Signed-off-by: Michael Keller <github@ike.ch>
Use the drop down for editing the tank use in the gas list in both the
equipment tab and the dive planner.
The tank use column is now available in the equipment tab for all dives
and not just CCR dives, as 'not used' is a valid entry in both cases.
However, if the current dive is an OC dive, only 'OC-gas' and 'not used' are
shown.
There still seems to be a problem that in some cases, when opening the
planner after selecting an existing CCR dive the drop down in the
planner does not list CCR gas uses - for some reason `displayed_dive`
does not seem to be updated correctly on opening of the planner. But I have not been able to
reproduce this consistently, and changing 'Dive mode' fixes this.
Signed-off-by: Michael Keller <github@ike.ch>
Clarified the message that is shown when a newer dive computer firmware
version is available, informing the user that
using an older firmware version may result in problems when using
Subsurface, as discussed in #3568.
This is currently only supported for Heinrichs-Weikamp dive computers.
Signed-off-by: Michael Keller <github@ike.ch>
The Heinrichs Weikamp OSTC4 introduced an additional
'Cave' brightness level that is dimmer than all existing ones.
Signed-off-by: Michael Keller <github@ike.ch>
Users report that the ShiftTimesDialog does not work on Mac and
Windows. Apparently, get_first_selected_dive returns NULL, which
should not be possible because the dialog is only created when
dives are selected. Very omninous.
Get the selected dives in the caller and pass them down. This
bug at least should not happen anylonger. Perhaps now the
dialog does not show at all, but that will narrow down the
root cause of the problem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This include prevented the statistics from loading for me on Qt6.
And it appears to be unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When switching from "empty mode" (i.e. the subsurface logo is shown,
because no dive is selected), the profile is first shown by switching
to the appropriate tab and then plotted. However, the showing might
lead to a resize event and then to a crash with owing to stale dive
data. Therefore, reverse that.
Note that I never could reproduce that.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the printing-template code, we loop through a vector and
then determine the index of the current element by searching
the vector. This irks me.
Since looping over a collection with an index is a rather
common theme, implement an enumerating iterator that can
be used as in:
for (auto [idx, item]: enumerated_range(v)) {
...
}
For now, use it for the above vexing case. Convert other
iterations of this theme later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For reasons of symmetry (there is a is_manually_added_dc()
function), create a make_manually_added_dc() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This causes UI confusion. Notably we go into edit mode and
reduce the number of samples, leading to loss of information.
If someone really manually adds a dive with more than 50
samples, they should still be able to explicitly open the
dive in the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This got broken in commit 7417f865cd ("cleanup: un-singletonize
ShiftTimesDialog") and no one ever noticed.
We need to intitialize the when variable and set up the initial texts in
order for the time shift dialog to show the correct information. Doing
this in the ButtonClicked member (right before the dialog is destroyed)
makes absolutely no sense.
Fixes#3535
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive-site editing can be reached from two states: from the
dive view and the dive list view. It always jumped back to
the dive view.
Therefore, remember the state. Use a stack-like structure, so
that the feature can be used for the dive-site view as well.
This is a bit inconsistent, because for example the statistics
view does not remember the previous state and allows a direct
jump to a different state. That should be fixed at some point.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This used to be one of the tab-widgets, which was illogical
and caused confusion. Notably, erroneously clicking on the
tab header led to a reset of the dive selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Owing to bit-rot, the extradata tab was not disabled if no dive
is selected. The reason was that there was an additional tab
(dive-computers) that should not be disabled. However that
tab was removed and now the extradata tab was not disabled.
Fix this, but note that there is another of these 'parasitic'
tabs, that should be removed, namely the dive-site tab.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The map listens to the reset signal by itself.
This avoids double reload of the map on open/close.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The get_minutes() function formats a time as m:ss
and returns a static C-string. Since all callers are
C++ anyway and transform directly into QString, let us
move this to the other string formatting function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Also allow editing sensor on a cylinder with already attached sensor.
This will swap the sensor data with the cylinder that it is taking the
sensor data from, removing the need for adding an extra temporary
cylinder when swapping two sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
No reason to keep this as a macro - a function is easier to
read, type safe and easier to debug. Moreover, give it the
more appropriate name "nearly_equal()". After all, it precisely
does NOT check floating points for equality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The FP_IS_SAME macro uses a relative precision to compare
floating points. This fails when comparing to 0. Therefore,
use an absolute precision in this case. Implement as an
inline function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Other overridden functions of this class are marked as well,
so let's do it for this function for consistency reasons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When there is no map support, selection of dive sites is suppressed.
There is no point in calculating the selected dive sites in this case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the entries in the DiveLocationModel don't have their entries
set as editable, the auto-completion popup turns of composition
if such an item is highlighted (see Qt code in
/src/widgets/itemviews/qabstractitemview.cpp), thus disabling
composition of multi-key characters.
Therefore, set this flag. Seems weird, but what should we do!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is crazy: when view() is called, the dive-site-suggestion
popup (DiveLocationListView) clears its WA_InputMethodEnabled
flag. This makes key composition not work as long as the
popup is open.
Thus, when showing the popup, explicitly set the flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds a preference setting in the "Default" settings tab to toggle whether
to display shortened names in the Map.
TODO: instead of using the generic "settingsChanged" signal, it would be much
more efficient to only update items based on the actual setting which was
changed.
Signed-off-by: Michael WERLE <micha@michaelwerle.com>
Attn: horrible hack!
For some reason the completion-popup does not have the
Qt::WA_InputMethodEnabled flag set. Thus, if the popup is open
composition of characters breaks.
Therefore, when starting completion, explicitly set the flag
on the popup.
This is 100% not how this was intended, but seems to work for
now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TagWidgets hook into the textChanged() signal to invoke
the word-completer. However, that signal is also emitted for
composition-keys, making composition impossible if the completer
decides that it should show some entries.
Instead, hook into the inputMethodEvent() function, where one
can test whether a real character was input.
Also, don't hook into cursorPositionChanged(), since that led
to an uncanny cascade of reparse() calls when editing text.
The UI experience is still rough as sometimes the completer
popup steals the focus and hinders further entry.
Also, this doesn't fix the location field, which is its own class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
State requirements for email address and
password format within cloud preferences UI
If email address or password entered in cloud
preferences, raise a warning within a
QMessageBox instead of the less-visible
report_error method
Signed-off-by: Jon Massey <jon.massey@thedatalab.org>
This allows having 3m depth grid for metric users.
* All original properties ( named diferently ) were renamed to three_m_based_grid everywhere to be consistent.
* Plus other small changes requested during review.
Signed-off-by: Vlad A. <elf128@gmail.com>
Signed-off-by: Vlad A <elf128@gmail.com>
Because of the old connect syntax used the incorrect signal names weren't
caught at compile time. To switch to the new syntax we had to make two
functions pure virtual in the WebServices class - let's hope I got that right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Making this simply depend on Qt5 or Qt6 was short-sighted as work on QtLocation
upstream continues. Instead break this out as its own option.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The undo stack is only relevant to the dives that were loaded at the
time the command was executed. If a file is closed, by specifically
closing it or opening another file, then the undo commands will
reference dives that aren't available anymore. Clearing the undo stack
ensures that we don't crash or accidentally do some undefined
modifications to the currently open file.
Signed-off-by: Michael Andreen <michael@andreen.dev>
To import media files from the web, increas the size of the
dialog box and allow several URLs separated by newlines.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Way back in time, in HwOS 1.86 a CCR mode was added which automatically
switched between setpoints based on depth.
This entry was never added in our system to configure the dc, and caused
the issue seen in #3304
This adds the Auto SP mode, to the dropdown, thus fixing #3304.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
The only things in display.h were profile related, so the
split between these two files is not comprehensible.
In fact profile.h includes display.h, because it needs the
struct defined therein. Let's just merge these two files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only caller misused this function to get access to the
current divecomputer. Remove it, since selection of the
current divecomputer is handled by the MainWindow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
