MAX_TANK_INFO is a new macro in dive.h to define the
maximum number of tank_info_t objects.
TankInfoModel's data() and setData() now check for valid
row indexes before accessing the tank_info[] array directly.
Without this patch TankInfoMode::data() can cause a SIGSEGV.
Reported-by: Pedro Neves <nevesdiver@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changeset fixes 5 issues specific to importing from Liquivision dive logs:
Issue #1: Buffer overrun causes segmentation fault.
At the end of a dive record, untranslatable data is skipped and the file is
scanned for the start of the next dive. This scan was implemented without
regard to buffer size and so the scan ran over the buffer boundary when trying
to scan for the next record after importing the last record in the file.
Issue #2: Incorrect identification of the primary sensor.
The primary tank pressure transmitter was being identified by using the sensor
ID reported in the first pressure event record encountered. When diving with
multiple transmitters (buddy, student, or group transmitters), this is often
not the case and results in the buddy or other group transmitter's pressure
data being imported instead of the primary's.
Through empirical observation of several multi-sensor logs, I identified a
previously unhandled event code (0x10) as marking a sensor identification
event record. Parsing this record allows the primary and other sensors
to be definitively identified regardless of which one sends the first pressure
event.
Issue #3: Sensor values added to the sample collection regardless of sensor ID.
When processing events, the code previously dropped through to create a sample
for every pressure event record, regardless of which sensor ID that event is
associated with. Pressure events for sensors other than the primary are now
ignored and omitted from the sample collection.
Issue #4: Duplicate samples when pressure event time syncs with sample time.
The sample index (d) was not incremented in this specific case resulting in
a duplicate sample (for the same sample time) being created when processing
the next pressure event record.
Issue #5: Unsigned time difference results in erroneous interpolated samples.
When interpolating/extrapolating depth and temperature values for a between-
samples pressure event, a signed time value is subtracted from an unsigned time
value, resulting in an unsigned term. This term is used as a scaling factor
and should be signed to allow for a negative value. Currently, negative values
are instead treated as large unsigned values which result in erroneous scaled
depth and temperature values.
Signed-off-by: Robert Bodily <robert@bodily.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Major functional change in this commit is the addition of found static BT devices
to the internal administration (on Android), in a way that is equivalent to
mobile-on-desktop. So, in both cases, the list of devices in the app are
as in the list of devices on the host OS (Linux or Android). To minimize code
duplication, the btDeviceDiscovered slot is split in two parts, the part to
act as slot for the Qt BT discovery agent (Linux, so mobile-on-desktop), and
the part only needed for Android.
Remaining to be fixed: the correct handling of the QML UI selection of
vendor/product. The first default dive computer is correctly detected,
all paired devices from the virtual vendow can be selected, but clicking
through vendors results in non logical selections. It is obvious why
this is, but a fix is not straigforward at this point.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a central function to convert a BT name to a vendor/product pair
known to Subsurface. This allows interfacing from a paired BT dive
computer, without actively selecting its type, but by selecting it
from the list of paired BT devices. So, after this, downloading from
multiple (paired) DCs is also possible.
And not the niced piece of code ...
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems a very trivial commit, but it is not. It appears that on an Android
build, with defined(Q_OS_ANDROID) the Q_OS_LINUX variable is also defined.
This results in a very tricky discovery process: 1) the JNI stuff pulls the paired
devices from the local BT controller, and 2) The QT discovry agent gets active
BT devices. 1) is a static list, that is, not dependent on actual
visual/discoverable BT devices; it is just cached data from the phone. 2) On
Android, this results in a list of actively visible (paired and not paired)
devices. On desktop, however (with QT/bluez BT stack) the QT discovery agent
just gets the list of paired devices, so more or less equivalent to the situation
described under 1) for Android.
Ok, a long story, but just do not do a discovery on Android at all. Basically,
we need the BT address, device name, and possibly a specific SPP service UUID. This are
fixed and known for HW and Shearwater at this point, so there is no need for a
(lengthy) discovery process, and making sure the the dive computer is discoverable
at the moment the app wants to construct its data to show in the UI. So, the
static list of paired devices is all we need.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's possible that the user has more than one dive computer with the
same name paired with their computer / device. So let's just add the
address to the name to make it possible to tell those apart.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a list of paired BT devices for the "Paired BT Devices" vendor. The
devices under this vendor represent all BT devces that can be found
from the local BT interface. Some special processing is required, as
the BT provided data is (obviously) missing the specific data needed
to open a BT device using libdc code. This processing is not in
this commit, but will follow. This commit is preparation for that.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
One Andorid JNI include was missing. And removed the unused ones
from QMLManager.
[Dirk Hohndel: I had added the missing include elsewhere, so this commit
now only has the removal of the unused includes]
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the recent refactoring of QMLManager to btdiscovery, the
manager.getBtAddress() got superseeded by
downloadThread.data().getDetectedDeviceAddress(). Corrected this
here.
Futher some debug output is modified, so that it report the proper
function names.
This corrects the download from an automatically detected OSTC 3.
Manul selection of the same device from the fake vendor "Paired
BT Devices" does not work, however. Still work to be done in
that area.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons unknown to me, the DCDeviceData instance was freed way too early,
and used afterwards, obviously resulting in a SIGSEGV. This commit creates
the DCDeviceData as a direct child of the QMLManager instance, ensuring
it does not get freed prematurely.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The used time format was h:mh: i.e. 1:16h:
This patch gets rid of the colon after the hour indicator.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
The following call in weight_string():
str = QString("%1").arg(lbs, 0, 'f', lbs >= 40.0 ? 0 : 1);
will make values in lbs larger or equal to 40 to have no fractional
part and be rounded to nearest, while values less than 40 will have one
decimal place.
fixes#412
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The format option "%m" doesn't work for MINGW/Windows and is reported as
an unknown conversation type and this sscanf() call would not work.
The alternative is to malloc() enough space manually - e.g.
strlen(input) + 1.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous script would fail on git folders that pull from more than one
repo. That's not a general case, but pretty usual for developers
pulling/pushing to github.
BTW in this cases, a lind git pull doesn't ensure we are pulling from
the right repo.
When run without flag, default to pull --rebase.
At the same time introduce a tiny func to return a message and bail out
after some command failures.
This shouldn't be part of the UI (qmlmanager), but part of our
overall handling of dive computers and BT devices.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
appendTextToLog prepends the elapsed time which can be useful, so let's
not remove that but instead have it log to qDebug() instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
all qDebug / qCDebug and friends now will be properly
logged into developer -> log, on QML.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Lubomir pointed out in his patch for datatrak.c, the format option %m
for sscanf doesn't work in mingw/windows. Fortunately it's unnecessary
as dates are dropped and we just get times.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
For different reasons some used functions aren't portable or simply are
not included in mingw. This includes index, rindex, strptime, and
timegm.
A workaround for this is needed, if we want to build for windows using
mingw based mxe environment. This patch does:
- drops index and rindex in favor of strchr and strrchr
- substitute strptime with a sscanf parsing
- emulate timegm with a private func smtk_timegm()
- remove definitions needed by strptime
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Needed to crossbuild to windows.
The cmake modules are just clones from those under
subsurface/cmake/Modules, tweaked to build smtk-import for windows.
As SmartTrak importer is building separately from Subsurface, a full
CMakeLists.txt file is necessary for the smtk-import directory.
It includes cross building to windows capability.
QML and C++ model don't interact too much, a new Rule
should be created and used on the QML
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a list of paired BT devices to the QMLManager class. In addition,
a very simple implementation is made of getting the paired BT devices on
Linux, so that we can test further processing of selecting the proper
devices, in a mobile-on-desktop situation.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It is very impolite to force BT on at start of the mobile app. We cannot
know if the user is going to import dives over BT.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As Qt is not able to pull the pairing data from a device, a lengthy
discovery process is needed to see what devices are paired. On
https://forum.qt.io/topic/46075/solved-bluetooth-list-paired-devices
user s.frings74 does, however, present a solution to this using JNI.
Currently, this code is taken "as is".
Currently, only for Android (so not mobile-on-desktop, or even desktop).
And only generating logging data in the logcat.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While it seemed logical to use the advertized service UUID that doesn't
appear to be working - instead using this hard coded UUID seems to do
the trick. I now did a successful download from my Shearwater Petrel.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
