It's important to disconnect the model from the ListView, otherwise the update in a
different thread will fail.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply make it always reset the filter. There's no point remembering the last
filter pattern and explicitly setting it, if the last thing we do is to reset
this pattern.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This one does nothing but whitespace - separating it into two commits makes the
previous one a lot easier to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We are still trying to ensure that the filter is indeed shown in front of the
dive list. This is working when running on the desktop without the rectangle,
but on Android this appears to be needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't need to toggle visibility, toggling height is sufficient. This
dramatically simplifies the transitions. But as a result we need to use the
'enabled' property to reset the filter.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML's logic for who gets focus is a bit complicated. But forceActiveFocus()
cuts through the confusion and makes sure that your field does indeed get
focus.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a usability / performance tradeoff. I like it better when it filters as
I type, but on mobile this may make things feel sluggish.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this is the starting point of my following commits, I decided to
leave it in place to give Jan credit for the work he did on
figuring out some of the plumbing needed to get things to work]
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add 2 icons for filter and sort capabilities. And as before, these
icons are coming from the Google Material design set.
[Dirk Hohndel: Jan's commit forgot to add the actual icons, I added
those so the commit matched its message]
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 8ab8a67f the checkbox where made resizable.
This applies the same functionality to the selector switch and makes the
two objects match in vertical size.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
There is no reason (any more?) to have a property defined
that basically renames the global pageStack into a local
pageView. Just cleanup.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Disable the Download button when one of the fields vendor, product,
connection is not filled in. The app will crash when trying.
In addition, make the underlying core code to actual download
more safe by checking this, and silently fail instead of crash.
And, yes, this is a double fix in this scenario, but the core code
is used in more places, so better safe than sorry.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The code to disable a quick button has moved to the DC matching logic,
in order to inactivate the correct button also for USB DCs.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
After the previous commits, we now have a preference that nicely
preserves the state of the UI, and we have the well known git_local_only
global, that is used to denote whether we want to use to local repo
only, or we want to interact with the online cloud as well.
This commit gets rid of the now superfluous syncToCloud logic. Instead
we simply set the git_local_only directly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Hook up the new preference to the UI. So now, an earlier choice
if automatic or manual download to the cloud is preserved in
between sessions. Strictly speaking this fixes issue 1725.
Notice that there is also a higly related syncToCloud thing
present. As factoring out that seemingly duplicate piece
of code is non-trivial, this will be done in a seperate
commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
We disabled the drawer menu button to switch between auto/manual
sync when in no cloud mode. Unfortunately, disabeling does not
give a visual cue to the user (like greyed out). Instead, just
make this button invisable in no cloud mode.
In conjunction a question. The manual sync to cloud menu item
takes you to the Cloud Credetials page in case pressed in
no cloud mode. While valid, this seems strange. This is not
changed in this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The background color was plain white, where we use a slightly different
color in other places. In addition, the background when clicking on a row
did not follow the theme setting. Consistency fix.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Something I only see on mobile-on-desktop, so at this point in time
not very relevant to the device apps. When hovering on the action
button, a toast message shows a hint box. These where empty in some
cases. So, just give the actions a text attribute where it was
missing.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When starting the mobile app, I noticed a short display of an empty
page with title "Cloud creditials" just before showing the
divelist. Simply a not nice visual effect.
This commit simplifies some logic and resolves this. As the code
in this part is fragile, this is tested for normal and clean
startup of the app, switching credentials, from no cloud to
valid account (which even nicely imports the no cloud dives:
this surprised me as I have never seen this working).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
We need to delete all related data when forgetting dive computers or we will
have an issue if we connect a DC from the same vendor but of a different model.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Improve the logic when auto selecting a DC for download.
Some USB cables only supply vendor information but we can select the correct
model if we have downloaded from it before.
For BT/BLE our discovery process adds the device name to the address, so we need to keep that in mind when we try to match against what we seen before.
When we have a positive match for a DC we have seen before we deactivate the
corresponding button of our saved DCs.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
A technically trival commit, but one with long story. This commit
basically reverts dd1d90b529 (1.5 year ago). While upgrading
Kirigami after Kirigami commit 26b8bdea24c39, we suddenly have
overlapping divelist and details pages in case they are both
on the pageStack (this occurrs when navigating from divedetails
to the divelist using breadcrumb navigation). At this point, its
not clear (to me) if this the by design of Kirigami, or an unintended
effect of the mentioned Kirigami commit.
This all said. Simply clipping resolves our issue of overlapping
pages, and it does not harm.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Something that I simply overlooked earlier with respect to scaling the
divelist. The trip databox did scale a bit, but it was not nicely
related to the hight of the trip header. So there was a tiny
overflow on the small scale on a small device. Fixed here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Partially cosmetic and partially a bug fix. 1) the seperator line
between trips and dives that are not in a trip was drawn in the
background color => the line was invisible. 2) When looking very
closely, there was a 1-2 pixel wide error between the seperator line
between trips and dives that are not in a trip. 3) there was a comment
that the trip separator needed to be extra thick. IMHO, this
looks ugly, and is superfluous as there is a nice sidebar along
the dives that belong to the trip. Finally, the line shall not
be displayed when not in a trip.
So, basically, the line (the QML rectangle) is completely rewritten,
to take care of all issues. There is 1 hack: the line color is
taken from the dive separator line. But its fully unclear to me
where that color is defined in Qt/QML or Kirigami, so I hardcoded
the proper color. That just works.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A small cosmetic change. The delete from divelist button was "glued"
to the top of the line. Not nice, so just center it vertically, and
make the button a tiny bit smaller, so that it fits nicely on the line.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Fully usure why the code was as it was. The trip header had 2
overlapping mouse areas, to expand the trip and vise versa. Simply
remove the smallest one.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A very unimportant change, but found when looking through the code
for places where size of icons where used. The one changed here
has nothing to do with icon related placement of a string, so
its replaced by a way more logical placement of the affected string.
Simply center the "no dives in the dive list" for an empty logbook
on the screen, instead of at some random place in the upper left
corner. Like I said: very unimportant, but it just looks nicer
in the UI.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A relatively big change for such a simple page. Most relevant
changes are:
1) Do not use Kirigami.Header anymore. It appears that this header
has word wrapping on (and we cannot override that). This is
annoying on this page, as headings seems randomly be split over
2 lines, even in cases where there is more than enhough room to
display it on one line. And as the Kirigami.Header is just a
trivial wrapper of a Text field, we can simple replace it.
2) A lot of the toplevel GridLayouts had width properties set. These
are not needed (and confused my debugging code), so they are removed
withput any visual change. As a general rule, do not try to set
properties that are not needed. In general, it can only lead to
binding loops or undefined behavior.
3) Add a font size to our Theme. The step from regular to title size
was a little too big.
4) And, obviously, numerous font.pointSize lines are added to actually
resize the font.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
There was a strange big margin at the top of the the dive details
page. Just make it a bit more "normal".
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
There was a significant of not needed whitespace on the download from
DC page. Most importantly, the bottom buttons where not on the bottom,
so we had to truncate the downloaded dives early (to prevent overflowing
the buttons). Further, a tiny bit of padding is removed between the
3 top pull down items.
All this, results in the diplay of more dives without scrolling.
For example, previously, only 1 dive (with 1 stored DC) was shown
on my 5.5" device, and now 3 (scale: regular).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Changed some hard coded size and positioning of the SsrfCheckBox,
in such a way that is scales nicely to the current setting of the
mobile_scale.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The select buttons in the downloaded dives delegate overlapped
the dive data. Simple margin change fixes this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Make the ssrfButton and the pull down menu's on the download page
resizable. Notice that also the contents of the pulldown
menu's is scaled based on the font size.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A user reported problems with editing the Suit and DiveMaster fields.
Apparently, editing does not change the currentText. Without doing
a deeper analysis, simply use editText (a more proper fix might be
changing the currentIndex on editing).
(Parially?) fixes#1694
Reported-by: Mark Powell <mcpowell123@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Changing the scale, it seems that the header of trips is not rescaled.
The reason for this is simple. That string does not use our manipulated
font but a different one. In fact, this is the only ocurrence on the
divelist that did not scale. However, other screens hardly rescaled at
all. All these will be fixed in seperate commits.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
After the work in the previous commit, it gets very simple to implement
font scaling. Just assign a the new desired font scale to the used
font metrics. The QML engine does all the work.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
By manipulation the used font pointSize property, we can dynamically
scale fonts and derived UI objects. At the same time, we have
some logic to determine the default font, its size, etc, for example
depending on screen properties. The scaling of the UI (and its font)
does not need to interfere with those defaults.
However, when we want to reset the pointSize, we alter the default, so
a backup of the default is needed. Ok, not al full backup, as the only
thing we like to manipulate is the pointSize, to which we want to be
able to return.
All this leads to this commit. A basePointSize property is added, that
is initialized from the default. Due to the binding logic of the QML
engine, it is not a classic initialization, but a binding between the
2 properties. We need to break that binding explicitly, so that
the original PointSize is always preserved.
In addition, a display of the new font property is added to the
developers theme test.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This theme test display created a new local FontMetrics object, that
does not per definition correspond with the "global" font metric
as defined in main.qml. The fix is simple. Display the font theme
data based on the one and only font metric from main.qml
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It seems the documentation is incorrect - unless you explicitly set the
ApplicationWindow font to the the Application Font (just writing this
down sounds so silly...), it doesn't actually work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disable the button for the currently selected DC.
This gives an extra visual hint of which DC is currently selected.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
To prevent stale data in the download DC path we need to clear the entire
qPrefDiveComputer.vendor() object when the user purges the used DCs.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Since we now store the last used DCs in out preferences we can use the information
to pre-populate the DC selector.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
We only store the address part of the connection name, so don't try to find an
exact match, try to find the sub-string.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to explicitly refresh the divelist when switching between
metric and imperial unit systems. Or the changes will not be visible until
we restart the app or scroll outside of what's in the current cache.
This will update both the divelist view and the dive profiles to show the new units.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add the option for the user to set the desired unit system for
Subsurface-mobile regardless of system locale
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trivial rename of a UI string. The string "Subsurface GPS data webservice"
reminds me too much of the legacy webservice.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Use qPrefLocationService::set_time_threshold and remove from
qmlprefs.cpp and qmlmanager.cpp
Remark: mobile UI shows time in minutes, while it is stored (and calculated)
in seconds. Therefore a /60 when reading and *60 when setting.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove distanceThreshold from qmlprefs and use qPref instead
update qml
no user experience change
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove developer from qmlprefs and use qPref instead
Update qml
show_developer is saved on disk, and thus remembered between starts.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to address the C++ object directy in qml, a different
registration is needed.
qmlRegisterType, registers the C++ class, allowing qml code to inherit
from it and make qml objects. This is needed for graphical elemnets
like profile and map
setContentProperty, registers the C++ object, thus allowing signals to be
catched.
Signed-off-by: Jan Iversen <jani@apache.org>
This is the first commit related to the removal of the GPS
webservice. It is nothing more then removing 2 buttons from the
menu to upload and download from the server, so technically
a trivial change.
As with the desktop application: Be very careful here as this
forces our users to use Subsurface-mobile, and a online cloud
account as that is the way to transfer GPS data from a mobile
device to the desktop.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add the UI components to let the user set the default cylinder and select
the chosen cylinder when adding a new dive.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
With the new setup we need to know which state we are coming from
when we are saving cylinder related info. When we are adding
a new dive we explicitly should save cylinder data to the first cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Same as for cylinder info, we need to make sure that the gasmixes gets saved to the correct cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Save the edited cylinder in the correct slot.
Since the cylinder number and the used cylinder number need not be
the same we first need to test if the cylinder are used.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This displays the used cylinders in a dive so that they can be edited.
Currently limited to 5 as a POC.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
If we don't know the vendor or product, let's not overwrite information
that we may have remembered from the last time the user downloaded from
this dive computer.
Note that this doesn't try to associate a specific cable with the
information used last time. We could be smarter here for people who have
multiple dive computers, but for the most typical user with just one
dive computer, this does seem like a good solution.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do strip the user friendly name from BT addresses and this mistakenly
mangled 'USB device' to 'device'.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This only works if the USB device contains enough information to do so.
We need to collect more information to understand what information we
get if those get plugged in. Maybe we'll get only the vendor and need to
leave it to the user to set the product (which we can do by passing an
index of -1 for product).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unless, of course, the user was editing or adding a dive - that would
be annoying to have interrupted (even though, of course, it's the user
plugging in the device which would trigger this in the first place).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user plugs in a device on Android we get a device string that
should allow us to figure out which dive computer was plugged in. Make
that string available to the QML UI.
Right now all we do is log it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add enum to qPref and remove elsewhere
update source core to reference qPref.
the enum cannot be in pref.h because it is to be used in qml and Q_ENUM
need the enum to be defined as part of the class
Signed-off-by: Jan Iversen <jani@apache.org>
The info text from the download process wasn't rendered correctly.
maximumWidth ended being a recursive reference and as a result the text
would render as very narrow and super-tall field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 5.11 adds useful warnings when code attempts to use anchors within
Layouts and even tells you how to fix things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
remove MapWidget entries from mobile-resources.qrc, and
reference map-widget.qrc in Subsurface-mobile.pro for iOS
Signed-off-by: Jan Iversen <jani@apache.org>
This is based on something that Anton Ludin sent to the mailing list.
Reading through the code it seemed that there were scenarios in which
DC_vendor and DC_product were not updated correctly. That's one of the
problems of the declarative approach in QML - it can be very hard to
figure out which code is run when in certain situations.
This may help address the issue with FTDI downloads no longer working on
Android.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The asynchronous load seemed to be (at least one of) the culprit(s) of
the banner occasionally not showing up.
Making the font for the cloud ID smaller looks better (and works much
better for long email addresses).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That change clearly would have benefited from better code review.
This is a superset of a change proposed by Jan Iversen.
Closes#1406
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason Kirigami.Icon mess up icon display when filename
extension is omitted. Because of this a perfectly good, scalable svg
show up as a low resolution scaled up icon.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
calls to savePreferences was moved to prefs. in
b8eb348f54, but the corresponding
C++ code was not merged.
Revert call to savePreferences to manager.
Signed-off-by: Jan Iversen <jani@apache.org>
The commit secured that plotDive was not called before actually being used.
However our (rather fragile) C++ qml interface did not work correctly (ony sometimes).
Revert the previous commit.
Signed-off-by: Jan Iversen <jani@apache.org>
Kirigami appears to have a bug that makes it fail to show our icon.
With this we can be much more flexible in what we show in the top area
of the global drawer.
Fixes#1331
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b8eb348f moved credentialStatus but missed one spot.
When starting from a fresh install, clicking "No cloud mode” fails because of this.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Looks like commit 807571a588 ("core: update deviceData default from
qml") never actually was tested with dive computer download. This looks
rather like an automatic renaming gone wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add settings variables/functions to qmlprefs
remove settings variables/functions from qmlmanager
change manager. to prefs. in qml files for setting variables/functions
Signed-off-by: Jan Iversen <jani@apache.org>
Set index of comboboxes in Download screen when the page
becomes visible instead of when it is created.
The pages is created before QBluetoothDeviceDiscoveryAgent on iOS and desktop,
therefore combobox indexes cannot be set during page creation.
Signed-off-by: Jan Iversen <jani@apache.org>
Dive list: on holding an item, the delete button
was not showing the icon.
Show GPS fixes: when swiping an item icons were
not being shown.
Partial for bug #1267
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Adjust size of image and text to ensure that
the clipboard buttom is (nearly) always visible
The buttom is not directly visible in landscape
mode on a small device.
Signed-off-by: Jan Iversen <jani@apache.org>
Users need a simple way to report download problems. Asking them
to go into settings, activate logging, and repeat the download
is too much.
libdivecomputer.log will always be generated, but overwritten, with every
download, so the latest log is ready.
The download is very slow due to BT, so there are no impact of having the log
active, neither in terms of size (a concern on small mobiles) or write time.
Signed-off-by: Jan Iversen <jani@apache.org>
When downloading with bluetooth, changing connection did not work.
The new selection was not passed to the download thread.
Fixes#1274
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
on iOS it is practically impossible to copy the App log
to e.g. a mail! in iOS 11 the log file is stored within
the subsurface container and you first need to copy (actually
using the clipboard) out from there to the "normal" document
shared space, before it can be used.
At least iOS users (and I believe Android users) are not really
used to work with files, so the process is not easy to document
in an understandable way.
The alternative is to provide a button, which simply puts the
log on the general clipboard, allowing it to be pasted in a
multitud of applications.
Signed-off-by: Jan Iversen <jani@apache.org>
Icons used directly by Kirigami use /org/kde/kirigami
as prefix. Ex: previous and next icons on header.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Icons used directly by Kirigami use /org/kde/kirigami
as prefix. Ex: previous button on the GlobalDrawer.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
We had turned this off since it caused rendering issues, but that
appears to be fixed now - and it should help to get us smoother
rendering of the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And maybe this will make it faster as well? Depends on how the binding
is implemented, I guess.
But at least it's less confusing to read now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the menu items describe what happens when you tap on that menu
item. That seems more consistent and intuitive.
See #1204
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In older versions of Kirigami this caused all kinds of problems so we
eventually gave up on it in commit 13c49276d1 (Revert "QML UI: make
dive list fold dive trips").
Now this seems to work much better, so let's bring back trip folding!
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of showing the map zoomed over London by default,
initialize the center at [0,0] and show the whole globe.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
centerOnLocationHard() is added in MapPage.qml so that
on `firstRun` the map is hard panned to the desired location
without animation.
This affects the selection of a new "Dive details" -> "Map it" or
when opening a GPS location in the map.
The idea behind this change is to avoid starting the map animation
from an arbitrary location such as [0,0] or London. Also, to not
start the map zoomed out completely and then zoom in on a selected
dive.
For this change to work, add the helper getCoordinatesForUUID()
to qmlmapwidgethelper.cpp/.h and use it to obtain the
QGeoCoordinates for a dive site UUID.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The background color in our own checkbox should match the page background.
Also includes some whitespace cleanup.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
In the initial move to comboboxes the correct location model
was not used. This uses the correct model and makes it behave
like the other comboboxes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When a dive has multiple buddies, pick the index of the first
to prevent the user from hanving to scroll through the entire
list when editing.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Removing the comparison of currentText vs editText when saving buddies
fixes the issue of data loss when dive has more than one buddy.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The HintsTextEdit just doesn't feel natural and intuitive.
Edit, fixed rebase issues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When the slot pageStack.onCurrentItemChanged() is reached
make sure that the stackView becomes non-interactive.
This prevents swiping left on the map to "go back".
Also, always reload the map markers when the map becomes visible.
This is not optimal and instead something in the lines of:
DiveList.model.onChanged()
is a much better solution.
Ideally the map reload should happen on dive removal, dive addition,
dive edits and sync from cloud.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
showMap() uses a location to open Google Maps in a browser.
Make showMap() a generic function to push the mapPage on the view
stack.
Update the calls to this function from child widgets and pages.
Also either call mapPage.centerOnLocation()
or mapPage.centerOnDiveSiteUUID() depending if the caller
wants the map to center on a dive site or on map coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The Page object has the following functionality:
- reloadMap(): reload all map markers.
- centerOnDiveSiteUUID(): center the map on a dive site uuid.
- centerOnLocation(): the map on a latitude, longitude in decimal.
- Select a dive list entry based on a marker selected on the map via
diveList.setCurrentDiveListIndex()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add the setCurrentDiveListIndex() wrapper for:
diveListView.currentIndex = idx
wich also makes it possible to disable the scroll animation when
selecting dive list indexes which are too far apart.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Also a developer likes to see a nicely formatted page, so correct
some bugs in margin handling on the log page. There was a strange
multi-line whitespace on the top of the list, and the total width
of the page was (initially) a little smaller than full page, so
showing a small strip of the page left on the pageStack. This
just looks weird. So again, cosmetics only.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also 15cdcdbc6. There, we introduced the wideScreen (set to true)
to evade a (cosmetic) bug in (most likely) Kirigami. The top dive
was partially obscured on the start of the app. And by setting the
wideScreen to true, the application header became of a fixed height.
Numerous changes further in Kirigami, we can now set this property to
false. This results in a correctly displayed divelist at the start of
the app, and *also* an application header that correcly hides itself
when scrolling up, and displays itself again when scrolling down. So,
a behavior that is common to, for example, mobile brouwsers.
This all said. I still believe this is a workround for strange behavior.
In fact, we should not need to set this wideScreen property at all,
and Kirigami should behave correct in all cases (true, false, unset
at our end). It behaves correctly when set to true or false, but
still displays a partially hidden top item in the dive list when
unset.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This worked correctly while compiled against Qt 5.10.0, but after
installing Qt 5.10.1 the behavior was just wrong. And as there
seems no way to color the background of a Kirigami SwipeListItem,
just revert this, and accept the (slightly) inconsistent coloring
of the page (for now).
This reverts commit 6700715b5d.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial and cosmetics only fix. The width of the rescan button
was forgotten, and this pushed the right margin to the right,
causing the combo menus to overflow the right margin.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
And another one. The SwipeListItem also needs to have a set
background color. Unfortunately, the lines between the
individual SwipeListItem disappeared, so, set the
smallest possible border on these items.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Also, this got broken after the Kirigami to verion 2.2 in main.qml.
So, set the header background color according to our theme setting.
Notice, that there is a remaining issue here. We could color the
text color in the header, but now, this seems impossible (or I
do not understand how and where to set this).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For some reason, after the update of the main.qml to version 2.2,
all Kirigami Pages and scrollablePages show up plain white.
So now, set a proper background for these pages.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is subtle one. With the changing of the theme color, it
appeared that the hover and selected colors in the divelist
where wrong (as in, always blue-ish). This is easily solved
by setting the activeBackgroundColor to our theme color, and
Kirigami does the rest (tint and opaque settings for the
different states a selected dive can be in).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a long standing issue. I wish to keep up with Kirigami developments
including new versions of their controls, but this is not always easy.
While we upgraded to Kirigmi 2.2 for most of our QML earlier, using this
new version of main.qml breaks numerous stuff. In fact, so much that
we just needed to wait.
With the progress in Kirigmi, it is now possible to upgrade, with still
some issues on our side to be fixed, but this is manageble now.
The main show-stopper was a construct to set our theme colors, for example:
Kirigami.Theme.highlightColor = Qt.binding(...)
This is not posssible any more, as the Kirigami.Theme has made these
readonly on their end.
This commit just removes the assignments to the now readonly theme
items. And the setting of a correct theme color for the action button.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial removal of 2 unused Kirigami actions. These were leftovers
from the time we had a very different style of cloud account
management.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commits fed2c5b6a1 and 572fc4707 erroneously deleted two
aliases. That is corrected here. Yes, QML with only runtime
errors can be a pain.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See e6e1473e6. Exact same commit but here for the
list of divemaster. The careful reader will spot a
small addition to the clearDetailsEdit() QML function.
Two more field are cleared.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a somewhat hacky commit. For a very long time, the delete
from the divelist on mobile crashed. That is, not always for anyone,
but for me almost consistently. This commit tries to solve it.
I found that trying to save the delete immediately after removing
data from the underlying model seemed to cause the crash. Hacking
around, I found that a simple beginResetModel/endResetModel between
the delete of the underlying model data and actual save is
sufficient to solve the crash.
The big question is, why does this all work? I suspect some of race
condition between deleting model data, and giving the QML engine
the opportunity to do its thing.
This is also related to issue #311, but that is not implemented
here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The new SHA mysteriously caused more than 300 extra warnings in the
app log. It was caused by a code change in Kirigami. The way to
suppress it is, in hindsight, after some hours of searching, trivial.
A Kirigami.BasicListItem shall have an icon defined. And as we do
not care about any icon here, just define it empty.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit consists of the following 3 parts:
1. There are 2 source files added, adapt our build process
accordingly.
2. Due to a change in icon and kirigami QML prefixes, we need to
adapt for this as well. Changed mobile-resources.qrc for that.
When this would not be changed, the icons will not be found.
3. To further prepare for the future, abandon the iconName
property in favour of the new icon grouped property, which
can have more attributes than only the name. But currently
it is only a syntactic change.
Tested on Android device, and no visible changes.
Signedoff-by: Jan Mulder <jlmulder@xs4all.nl
This is mainly a cosmetic improvement. The GPS menu stayed
visible, when selecting most of the options. This looks weird,
as the close of the menu is also an indication of the selected
action carried out. So, just close it
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Navigating using the breadcrumb in the header did leave the
dive detail edit (and add) mode in such a way that (for example)
navigation in the dive list was suspended. Obviously, it is
debatable what should be done. Saving the edits/add, or
cancelling them. For now, this commit cancels them
silently. This is the exact same thing that is happening when
the user selects the dive list from the drawer menu.
Fixes: #932
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When editing (or adding) a dive, the internal data containing the
attributes on the edit page was not cleared when editing was
finished (in any way, by saving the edit or by cancelling it).
As long as the user only edits existing dives, all this poses
no problem, as at the start of a dive edit, the data is filled
from the dive to be edited. However, when adding a dive, data
coming from previous edits shows up. This not clearing data
also causes the strange effect as written in issue #950: adding
a dive, deleting it, and adding a dive again, added the first
added dive data, without the edit screen being shown.
All this can be solved by clearing the data from the edit when
editing is done.
Fixes: #950
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial fix. Show the message "Turning off automatic
sync to cloud ..." when turning automatic sync to offline. Just
a more logical moment to show this message. Also rephrase the
message "Enable auto sync" to "Auto sync enabled". It shows
a status, and not an action.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Set download srceen in a sane state after a previous download
session using this screen. The erroneous behavior was very
similar to the one fixed in commit 7fe9bbe295dcf92. For example,
download some dives, quit the screen, go back, and the bottom
buttons are still selectable.
This commit resets some values when leaving the download screen
(ie. not only swiping it away), so that it looks sane at a next
visit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Reset the Retry button on exit of the Download from divecomputer
page. So, it it not reset wehen swiping this page away, or
cancelling a running download, but resetting it on accepting
downloaded dives.
As we do not have real error reporting (from download failures),
this all is a little arbitrary. Another "fix" could be, not
changing the button text at all.
Further notice, this is not specific iOS, but also Android.
Fixes: #895
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While the autocomplete function only works for the first entry
adding multiple comma separated buddies can still be done.
Fixes#608
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
I consider it more natural for example for the GPS menu
to stay open when an action is clicked. So this turns off
the general close but has to trigger it on individual items.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Otherwise the divecomputer has to be in pairing mode
at app start time.
Unfortunately, this leaves less space for the progress message.
My time/qml knowledge does not suffice to move that to the next line
(when moving that out of the RowLayout it overlaps with
the buttons).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
on iOS the address we display on Connection is an UUID, not
a physical address.
This change the pattern (on iOS) used to enable bluetooth_mode.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
When the user entered a dive site using autocompletion, it
is a known site, of which we might have a GPS location already.
Just fill the known site coordinates.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add the capability to select the location name from a list, constructed
from the known dive sites in the logbook.
Fixes: #546
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Upgrade QtQuick to 2.6. Seeing a small artifact in the application
header, lets see what happens when upgrading more includes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When first tested this commit, especially the dive list was looking
terrible. However, after including newer SHA's from libkirigami, and
correcting lots of spacing/margin issue, a retest of this commit shows
no strange artifact any more, and the amount of warnings in the log
output is reduced significantly. So now, it appears save to
upgrade.
Notice that main.qml still uses Kirigami 2.0. and is not updated in
this commit. With version 2.2, there is a new way of theming, that
is not (yet) compatible with our current code. Blindly upgrading to
2.2 leads to a almost black dive list, wrong button colors, and
runtime errors in the log, due to the fact the direct setting from
QML Kirigami's Theme colors is not allowed any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Move all the map widget platform agnostic files to the
<subsurface-root>/map-widget folder.
This avoids the confusion about the desktop version of subsurface
using mobile components. The map widget is planned as a shared
component between the mobile and desktop versions.
desktop-widgets/mapwidget[.h/.cpp] still remain as those are specific
to the desktop version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
In commit bdf6dc7828, we pulled in some changes from Kirigami.
I checked all the new commits and they seemed just fine, and a
test (on desktop) on both Qt 5.9.1. and 5.9.2 showed no obvious
problems.
However, some time later, working on something else, I compiled
from Android to test, and saw some strange behavior in the dive
list. The topmost dive is partially hidden behind the application
header on startup of the app, but can be pulled down. Not a big
deal, but is does not look right.
After tedious testing, bisecting, etc, I found commit
d0f3941a4d7f4d4c6 in Kirigami (obviosuly, it was not clear from
the start that it was in Kirigami, as I could well have been
some error in Subsurface, or even Qt). Mentioned commit is
trivial, and handles with the wideScreen property of the
application window. With wideScreen = false, the bug is
visible, when true the bug is gone.
This all said. Just set the wideScreen to true, which can
definitely be considered a workaround. I exspect that this
commit can be reverted later on when Kirigami is fixed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While testing the mobile app on Qt 5.9.2, I encounted a show stopping
issue. Select a dive in the dive list, go back to the dive list (as
selecting a dive opens the details), now scroll down to a different
dive, and select one. The app starts enumerating (moved smoothly
according to the specs) all the dives between the old and the new
selected dive. So, depending on the distance, this could take forever.
Explicitly: on 5.9.2. only.
From the Qt docs:
highlightFollowsCurrentItem : bool
If this property is true (the default value), the highlight is moved
smoothly to follow the current item. Otherwise, the highlight is not
moved by the view, and any movement must be implemented by the highlight.
End Qt docs.
Setting this property to false solves the issue. Tested on both Qt 5.9.1
and 5.9.2.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The 'isReady' boolean flag is now set to 'true' only
once the Component.onCompleted slot is reached.
The flag is then used as a safe-guard in the
onZoomLevelChanged slot. Calculate the small circle radius
(mapHelper.calculateSmallCircleRadius()) only if 'isReady'
is set to true.
Prevents a crash if the Map widget is not ready, yet a zoom
level is set via the 'zoomLevel' property. The crash happens
because mapHelper.calculateSmallCircleRadius() has a callback
to the Map component to estimate some points and distances of the
small circle.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Commit 344d976593 resulted in the start of Subsurface with a map of
the whole world. The user has to zoom in (assuming the case that the
first selected dive has a position), in evenry session. This is solved
by setting the zoomlevel at startup at the default value. Ok, this
results in a map of central London, UK, when starting Subsurface with
a dive without location, but is this as good as any map.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A not perfect improvement, but way better IMHO. Prevent the list of
downloaded dives to grow over the buttons at the bottom. Just a simple
change by adding a bottomMargin to the list.
Notice that there is still some overlap, but for now I consider this a
trade-off between the scarce screen real-estate and the wish to present
and much as possible dowloaded dives.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trip headers spanning more than one line where broken at incorrect
locations in the string. Not exactly sure, but I think this came with
the newest Kirigami SHA, and especially the Label change.
Carefully reading the code for the trip heading shows a "strange"
negative margin. So the margin is on the outside. This margin was
used to split the string, allowing for a small invisible part of
the string to present as trip header.
This is solved by this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This does two main things to the map widget:
- if there are no coordinates, do *not* zoom out to the whole-world
view. Just leave the map alone.
- when zooming out to move to a new dive site, zoom back in to the same
zoom level it was before.
These two changes make it much more pleasant to move between dives,
particularly as you move back-and-forth without losing the zoom level.
NOTE! The zoom level gets reset if you move dives _while_ zooming is
happening, and so moving quickly between dives will still end up losing
the original zoom level, replacing it with a bigger zoom-out that was
active _during_ a previous zoom.
That could be seen as a feature (moving incrementally to an "overview"
zoom when moving quickly between dive sites), but honestly it smells
more like a bug to me. But regardless of that feature/bug, this new
zoom behavior is more pleasant than our older "always reset when
moving".
But it might be a matter of taste, so people should try this out and
comment.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation,org>
Cc: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Again, mostly related to label change. First, the top button was "glued"
to the top of the screen, so added a little margin there. It
appeared that all the other items on the screen (progressbar,
2 button rows, and the downloaded dive list) where not moving down
due to the add of that little top margin. This was solved by
anchor-ing the items together. Finally, the text of a downloaded
dive was on the top of the delegate lines. Not sure where that came
from, but easily solved by centering it explicitly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As in a525fff112, also the dive details top data was not nicely positioned
any more due to the deprecated and removed Kirigami.Label.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The new SHA for Kirigami did all kinds of nasty things to our DiveList.
This commit tries to repair most of the damage. Nothing more than
some margins, anchors, and even a font that changed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commit 8f6827ab12 brought a new SHA for Kirigami, but that introduces
a very noisy logging of "Kirigami.Label is deprecated. Use
QtQuickControls2.Label instead".
So, thats what done here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Before this change, there was only one way to create the local
no cloud repo on the device. The user needed to add at least
one dive to the no cloud account (so that there is something
to save). While this worked in some scenarios, it could also
get things in an inconsistent state: credential status = CS_NOCLOUD
but no local repo. This was a dead end.
In this commit, the creation of the no cloud repo is made more
explicit. When asking for no cloud mode, just create an (empty)
repo for it when it does not yet exist, and otherwise, just
open the existing (possibly empty) repo.
Now, a user can have no cloud repo, next to (any number of)
cloud accounts.
This leaves one functional aspect left: how does a user abandon
the no cloud repo, by merging his data into a true cloud
account. This is code for this, that tries to do this merge in
a smart way. This seems to be broken (too). To be clear: this
is no part of this commit.
Fixes: #667
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It can be difficult to distinguish the new marker
which is added on the map and has to be dragged
when editing a new dive location.
By adding a new grayed-out marker it becomes
possible to gray out all other markers, while
the current marker which is being edited is still
bright red.
Suggested-by: Dietrich Meyer <dietrich@sunnynames.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML map uses MapItemView. MapItemView needs a delagate
in the form of a MapQuickItem. The MapQuickItem needs a
'sourceItem' which would be used as the visual (e.g. marker)
on the map.
If the root sourceItem is of type Item, the marker becomes
non-clickable. If the root sourceItem is an Image, the clicks
work.
This patch removes the root Item, which makes the code
less organized, but at the same time it fixes the bug.
Bug reproduced on the following Qt versions on Ubuntu:
5.5.x, 5.7.x
Bug cannot be reproduced on Qt 5.9.x on Windows.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This commit implements possible switching BT on and off during a session,
so not needing a restart of the app when the user forgot to switch
it on when starting the app.
For this, the following needed to be done: 1) create a handler that
reacts on local BT device status changes. 2) repopulate the connection
list in the download screen when a BT status change is detected.
Notice the subtile change of the Q_INVOKABLE btEnabled() function
to a Q_PROPERTY. This gives a nice dynamic behaviour when
switching BT on/off with the app open.
Fixes: #556
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
If the QML modules for QtLocation and QtPositioning are
missing the QML in mapwidget.cpp will fail to load,
which can lead to crashes.
To solve the issue check if the QML has loaded and set
a flag 'isReady' to true. If the loading has failed
load another QML which is for showing a red error text
in the lines of `MapWidget.qml failed to load!`.
If the map QML has failed, use a macro in all relevant
MapWidget members to turn them into a NOP. This approach
leaves the rest of the codebase intact - e.g. no checks
in classes which connect to the MapWidget class.
Fixes#596
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This commit is empty when shown with '-w' - it just updates the
indentation after commit c00804eff6 ("QML UI: always start edit at top
of page").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When starting to edit / add a dive, the Flickable needs to be positioned
at the top of the page, not the last position shown.
For clarity I'll do the re-indentation in the next commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hard switch was not ideal. This isn't perfect, yet, but a step in
the right direction. The 'transitions' to change the visibility
properties are a bit odd, but that's how it's done in the examples as
well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need a white path drawn on the dark action button, but a black path
drawn for the main menu.
(looks like a white space change snuck in here)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addresses some review comment on whitespace and translated
string formatting.
In the string formatting, a tiny additional change is made.
I wanted the email address in the explanation text in a bold
font. Using the HTML <b> for this, removed the /n newline
characters in the output. Apparantly, mixing these two
formatting styles does not work. No problem, replaced the
/n to HTML style too.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit tries to implement most of issue #515. It reworks the
one credential page, which its dynamic PIN part, into two pages.
Main driver of selecting one of the two pages is the showPin
boolean. Page 1 contains the email/passwd field (and the
option to use a no cloud setup). Page 2 only contains the PIN
part (and the option to cancel the process).
The Kirigami central button does not seem very handy here. We
need, for example, a cancel, sign-in and register, only register,
etc. buttons, which are not easy to handle in specific icons.
Therefore, normal pushbuttons are chosen to deal with user
interaction, and the Kirigami button is removed from these
pages.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Previously, we could edit the cloud credentials in basically two
places. At startup of the app from a fresh install (and no previous
data on the device), and from the settings. Issue #515 proposes
only one way.
However, we need a way to access the new credential UI pages, so
that the pages at a fresh install of the app can be reused,
for example for account switching.
This commit replaces the settings cloud credentials block by
a simple (not editable) display of the current credentials, and
a button to access the initial pages, for all management tasks
on the credentials.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It appears that the onCompleted of the StartPage item is triggered
before the onCompleted of the rootItem. This is logical as the
Startpage is a child of the rootItem. And, yes, this does matter.
As the divelist also contains the logic for initial cloud
registration (and is the default page shown in a state where
the cloud credentials are valid (CS_VERIFIED state)), we need to
know the correct credential state at start of the app.
The move of this one line of code makes sure of that, in addition
to setting the credential state from the preferences. Now, the
setupActions function can reference correct credential data.
This is further preparation for a better cloud creation
process from mobile.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Following on beb0d5703a, the context menu seems to work fine
with a much older QtQuick import - version 2.0.
The 2.7 import is technically a development leftover
and a minimal version should have been considered earlier.
On older Qt setups (e.g. 5.5.x) this might throw a:
'module "QtQuick" version 2.6 is not installed'
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Having two different enums around with more or less the same
definition has lead to unclear code. After removing two not needed
states on the mobile end, the remaining step to one enum for the
credential state becomes almost is simple rename operation.
Unfortunately, I do not know a way to embed a plain C enum
from pref.h into the QMLManager object. So after this, there
are still 2 enums around, but now identical.
This commit is not changing any functionality.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a no-brainer removal of the VALID_EMAIL state used in QMLManager.
All current usage of this state is "if state is VALID or VALID_EMAIL",
so there is no distinction between the two states.
It is even a little different. The comment suggests "when we can open
a local cloud storage, tied to a cloud account (so explicitly not
the no-cloud status), we have at least a valid email". While this
is formally true, this implies that there is also a cloud account
on the cloud server (ie. the cloud account is in a VERIFIED state).
In other words: currently, there can't exist a valid local storage
that is tied to a valid email adress, without valid cloud account
on the server.
Notice that this touches the discussion on GitHub for commit
e76f527fe5 (pull request #520). Can we implement the creation
of a valid cloud account without data link to the cloud server?
Currently, we need the server to confirm the email address (for
example for uniqueness reasons on server side). Obviously, we could
hack our way out of this, but we have a perfect solution already
in place. Create a no-cloud account, and transfer that later to
a true and valid cloud account.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The googlemaps plugin is about to support tile language
via the PluginParameter 'googlemaps.maps.language'.
To be able to pass the subsurface UI language (obtained
from the uiLanguage() helper) the Plugin has to be created
dynamically, only *after* the MapWidgetHelper is created.
MapWidgetHelper::pluginObject() now provides a QString which
contains the Plugin object and also include the uiLanguage
ISO value.
This string is used in mapwidget.qml as:
map.plugin = Qt.createQmlObject(pluginObject, rootItem)
This creates the Plugin object dynamically with the proper
UI language string, but also requires a couple of small changes:
- move the declaration of map.mapType after the
Qt.createQmlObject() call
- assign map.activeMapType after map.mapType has a value
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML Map has a couple of methods - toCoordinate(someQPointF) and
fromCoordinate(someQGeoCoordinate). Ideally, if one passes a point to
toCoordinate() and then attempts to convert the resulted coordinates
back to the point, the same point in the Map view port with minimal error
should be retrieved. That's not always the case - e.g. near
47.400200 -123.142066, which means that the methods are not exactly
*reliable* and there might be Map class bugs at hand.
The new zoom-in and zoom-out improvements try to work around the above:
- for both centerOnRectangle() and centerOnCoordinate(), if no good
zoom-out level is found (newZoomOut), the zoom-out is set to the default
value of defaultZoomOut. In practice, this prevents the case where the map
does not zoom-out at all when going from one place to another
- centerOnRectangle() now uses rectangle diagonals to estimate a fit,
instead of checking if 2 points (top-left and bottom-right) are visible
in the viewport. The usage of fromCoordinate() was giving bad results
in this case and comparing distances (diagonals) is more reliable
but more expensive on the CPU.
Due to the inconsistencies of toCoordinate() and fromCoordinate()
the dynamic zoom-in and zoom-out are still not ideal, but the current
implementation is somewhat usable with decent accuracy.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This appears to fix the mystery crashes that can occur when deleting a dive
from the dive list.
Fixes: #497
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
This gets rid of TypeError messages, but does not appear to affect behaviour
qrc:///qml/DiveDetailsEdit.qml:254: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:228: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:216: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:204: TypeError: Cannot read property 'dive' of null
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
MapWidgetContextMenu now has a new action (SELECT_VISIBLE_LOCATIONS),
that will invoke the MapWidgetHelper method selectVisibleLocations().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
First, this function calculates the zoom out effect until both the
current Map center and the target rectangle are visible - see the
"calculate zoom out" part.
Then it calculates a zoom level, so that the target rectangle
fits the viewport, but also so that the zoom is not too much (clamped).
see the "calculate zoom in" part.
NOTE: "centerStored" (the variable used to store the current map center)
is created using QtPositioning.coordinate(), because the code needs a new
object and not a reference of the map.center QGeoCoordinate object.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add stopZoomAnimations(), which is really just a precaution
function to make sure we have stopped all animation of the
map before doing calculations! Since the animation *should*
be running in a separate thread, this would make sure the Map "center"
and "zoomLevel" properties do not change.
Add pointIsVisible(), which is a helper to determine
if a point created by map.fromCoordinate() method is inside
the viewport. fromCoordinate() has to be called without the
"false" (clip) flag for this to work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
MapWidgetHelper::centerOnDiveSite() now checks if more than
one dive sites are selected and finds the most top-left and
bottom-right ones in the coordinate system to form
a rectangle.
It also supports the special cases where a selected dive site
does not have coordinates or the case where only a single dive site
with GPS coordinates are selected.
TODO: implement mapwidget.qml::centerOnRectangle()
This QML function will receive a QGeoCoordinate based rectangle which
has to be centered in the viewport with animation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
For instance, if the 'googlemaps' geoservices plugin is missing
a new message is now shown:
"qml: MapWidget.qml: cannot find a plugin with the name 'googlemaps'"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Do so until the following issue is resolved:
https://github.com/vladest/googlemaps/issues/9
With the satellite map ([1]), the black tiles at relatively high
zoom levels over the Red Sea cannot be seen. Instead it shows white
tiles at the ultra-maximum zoom level at places.
As a side note, the "satellite" map does not have the country labels
which the "hybrid" map has.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
No idea why this was restricted to be so narrow. Also, making
the font of the label smaller and lighter seems visually more
pleasing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes sure that the autocompleting comboboxes never displays the scroll list where the user can pick an entry, and as such forces the view of a autocompleting textfield from the users point of view. The reasoning is that when scrolling in the drop down list it it possible to scroll to far and thus abort the ongoing edit by flicking away the edit page.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Mobile devices hare rather limited when it comes to screen size,
there is no point in reducing the availabel space more than neccecary.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This handles a cornercase where a user starts editing and then cances the divedit followed by a return to edit mode. The previously acive textfield would then be active again even though all changes are lost.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
For some reason the textfields on dive edit page did not loose focus when editing ended by press on the return key.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When the user makes a selection using the autocomplete function while editing a dive the keyboard should close and the selection list should disappear.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add star icons from the material repository.
https://material.io/icons/
The icons are under Apache License Version 2.0
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This patch makes use of the geolocation plugin "googlemaps"
for Qt Location with source code from here:
https://github.com/vladest/googlemaps
The change from the ESRI plugin is that it requires new indexes
for the Hybrid ([3]) and Street ([0]) map types.
There are more zoom levels in this plugins, but our default zoom-in
settings seem to transition well to it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The C++ side for the desktop version already does that. Add a slot
for that in QML, for later use in the mobile version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The editing support is added via dragging. It is handled via the
MouseArea's drag.target of the MapQuickItem. The drag target changes
with the model selectedUuid.
"mapAnimationZoomIn" now also does an initial zoom-out before moving
to a new location.
centerOnCoordinate() now pefroms calculations to determine how much
the animation needs to zoom out. What it does is it reduces the Map
zoomLevel util both the current and the new target coordinates are visible.
It then restores the zoomLevel and performs animation based on newZoomOut.
animateMapZoomIn() is now obsolete.
The patch also includes the following smaller changes:
- remove the setSelectedUuid() call in deselectMapLocation()
This is now handled in C++
- sets "defaultZoomIn" to 12.0
- use ">=" when determining if a mapItem text should be visible
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapWidgetHelper QML instance now has the slot onEditModeChanged()
which toggles the visiblity of a newly added message box that
notifies the user if editing mode is enabled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Call setSelectedUuid() from C++ also center on coodinates instead
on a MapLocation, as there is no point to pass the MapLocation object
back to QML.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapItemView delegate now includes a white Text element.
It uses the MapLocation "name" property as text.
This text is only visible if the map zoom is above "textVisibleZoom".
For hundreds of dives, using the DropShadow effect for the text
makes it laggy. Instead, using a fake drop shadow (duplicate black
Text under the default text) makes it much better.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The buttons are positioned bellow the "toggle map type" button
and increment / decrement the zoom by "zoomStep" (2 for now).
Also clamp the zoom-in level to "map.maximumZoomLevel".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Double clicking a marker or the newly added MouseArea now performs
a +2 zoom-in over a period of 500ms and centers on that clicked
coordinate.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Different actions might be performed depending on the count of selected
dives - e.g. deep zoom only for a single selected dive.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The signal emits a QList<int> filled with dive idexes from the
main backend dive table.
The MapWidgetHelper QML instance handles that in onSelectedDivesChanged().
This will only be needed for the mobile version, as the desktop version
should connect it's own slot in MapWidget.cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea of this flag is to be able to only to emit the
selectedLocationChanged() signal when the user clicked on the map
(fromClick == true).
MapWidgetHelper::selectedLocationChanged() listens for this signal
and only then it will select nearby dives based on a "small-cicle".
If "fromClick" is false, it's the backend or the dive list that
updated the selection and MapWidgetHelper::selectedLocationChanged()
should no be called.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Each time the zoom changes MapWidgetHelper::calculateSmallCircleRadius()
is called, and the "small circle" radius is stored in both C++ and QML.
On the C++ side this radius will be used to select multiple nearby
dives.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
openLocationInGoogleMaps() now can be used to open a URL in an
external browser, triggered by the context menu. Use the same
Google Maps URL formating as in main.qml showMap().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
