It was suggested in a review of a previous patchset that we should
capitalize the use of "use dc" to "Use DC" - but if we were going
to do that we should do it everywhere, not just in the one place.
This is the followup to do that.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
In the code, the difference between SALTYWATER and SALTWATER is hard
to see. More importantly, in the UI - Brackish is the word for water
that has more salt that freshwater but less salt that seawater. The
docs already use the word to clarify what is meant.
These can be useful in a printed divelog, especially if the
log entry is also showing weight and exposure suit.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
The DiveListView had a singleSelectedTrip function that
returns the selected trip if exactly one trip is selected.
This could be very slow if numerous non-trip items were
selected, because all the selection indices were back-
translated by the proxy model.
This could make selection changes very slow, because the
MainTab used said function to determine whether it should
show trip or dive data.. Indeed, with a 3500 dive test log,
when selecting all dives in tree mode, the updating of the
TabWidgets is sped up from 130 ms to 5 ms this commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView would touch the selection-innards directly.
Let's encapsulate that. Moreover, take care to reset the trip
selection when resetting the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to dives add a selection flag for trips. The reason
being that search for a selected trip can be painfully slow when
we do it through Qt's proxy model.
Make sure to deselect trips when they are removed from the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No point in slurping in all of dive.h for translation units that only
want to do some time manipulation without ever touching a dive.
Don't call the header "time.h", because we don't want to end up in a
confusion with the system header of the same name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This included QFile, which is fatter and not needed here. Include
QFile only in the actual translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There appears to be no reason to slurp in all dive.h when compiling
membuffer.c. units.h might not seem like the perfect place, but it
is the most fitting I found.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency: declare enumerate_dives as extern, since we do that
for all other C-functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No external caller of this function exists. Moreover, turn the return
type to void, as it only returned the passed-in plot_info and no
caller used that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It make debugging much easier if the function signature tells you
that a parameter is not altered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When plotting profiles with surface segments, there were strange
artifacts. As we found out with Robert, these were due to the fact
that the calculated maxtime was set to the last event which is just one
second inside the surface segment. This terribly confused the profile
code. For example, it didn't properly allocate samples for the surface
segment.
Thus, when calculating maxtime, consider the last sample beyond the
last event.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When we had fixed-sized cylinder arrays, the planner used the last
empty cylinder for "surface air". This was not recognized by the UI
as a separate cylinder, because "empty cylinder" was the sentinel for
the end of the table. The conversion to dynamically sized cylinder
tables broke this code: everytime the surface segment is changed,
a new dummy cylinder is added, which is visible in the UI.
As a very temporary stop-gap fix, emulate the old code by creating
a cylinder and then setting the end-of-table to before that cylinder.
This means that we have to loosen the out-of-bound checks.
That's all very scary and should be removed as soon as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be temporarilly used by the planner to mark consumption of
air at the surface. Do this by creating a new function add_cylinder,
which replaces add_to_cylinder_table() and takes care of always adding
a dummy cylinder at the end of the table. Make the original
add_to_cylinder_table() local, so that it cannot be accessed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used by the divelist to check wether a selection change is
programmatical or user-initiated. However, since there is only one
entry point for programmatical selection changes, this is not needed
anymore. Remove it - this removes an inter-module dependency.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We no longer use libusb to access USB devices on Android, therefore
there's no point including libusb in our build. Also, we have never even
attempted to run the tests on Android, so let's not even pretend to
support building them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move this to the core so that desktop and mobile don't have
to call this explicitly. Matter of fact, mobile didn't call
this. It is unclear, whether that was even used on mobile,
though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It makes no sense to keep the device nodes if all the other data
is cleared. Let's do this automatically and not explicitly.
This ensures that the function is also called on mobile.
Currently it was only called on desktop.
Weirdly, the parser-tests were expecting that the device nodes
were not reset by clear_dive_file_data() and therefore divecomputers
were accumulating in the test results. Thus, the additional
computers had to be removed from the expected test results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter sets the maximum date to now. This is so confusing when
you manually add a dive and it isn't shown, because it is slightly
in the future. Add seven days, that should help.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This only checks the first divecomputer as the semantics for
multiple dive computers with different dive modes are not
clear. Should we check them all?
The implementation is a bit hackish: the indexes [0...n] of the
combobox are mapped onto [-1...n-1], where -1 means don't filter
and n-1 is the last valid dive mode.
Implements #2329
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Arguably, returning 0 for a dive with no cylinders is wrong, since the
0 is a valid cylinder id, however that cylinder doesn't exist. Instead,
return -1. All callers of explicit_first_cylinder() return early anyway
for dives with no cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we removed MAX_CYLINDERS, we have the possibility of dives
with no cylinders. In such a case, setup_gas_sensor_pressure()
would do invalid read- and write-accesses. Therefore, return
early in such a case.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Turns out that at least on Android libgit2 sometimes rejects valid
certificates. And I cannot quite figure out when and why. But since we
actually already checked the validity of the certificate when we called
canReachCloudServer() (and the Qt code handles certificates correctly),
we'll simply ignore this here and override the check to always return
true for our cloud server.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I would have bet money that Android used to send stderr to the logcat
log, but apparently it doesn't (anymore?). So in order to be able to
have a chance to debug weird cloud storage issues on Android, let's do
some wholesale replacement of fprintf(stderr,...) with our own version
of the INFO macro that we long ago borrowed from libdivecomputer (and
rename it to ensure we don't have a conflict there).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
free_plot_info_data() freed the pressure-data, but didn't set the
value to NULL. Thus, when the plot_info was reused, a double-free()
could ensue.
Crash condition: export the profiles of multiple dives with pressure
data.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be used by the test to clean up test branches that are created
on the server. Since we aren't testing that functionality (it's not
something that Subsurface itself ever does) the helper prints out errors
it encounters, but doesn't report them back to the caller.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you had one of the unfortunate local git caches with a local HEAD
just pointing to 'master', this will make note of that and then fix it
up to use the proper branch name in the cache repository.
[Dirk Hohndel: demoted from error to fprintf as most users won't care]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In create_and_push_remote(), we set up the remote tracking etc to use
the proper branch name, but never actually set up the initial local
branch for the new cache repository at all. So the repository would end
up with the default 'master' branch, instead of the branch name it
should have.
This went unnoticed, because most setups start by initializing the git
caches by cloning from the cloud, and that worked fine.
Debugged-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a crash: when the undo commands removed a dive from
the list, the fulltext cache was not cleared. If now the divelist
is reset and then the undo-command deleted, deletion of the owned
dive tries to remove it's fulltext cache, which doesn't exist
anymore.
For reasons of symmetry, when readding the dive, its fulltext
has to be registered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When initializing the fulltext-cache and the dive-list, every
100 dives a notification was shown. I had a feeling that this
made startup significantly slower, but that could have been
purely psychological.
Therefore I measured and indeed, removing the fine-grained
notification, it becomes *significantly* faster. For a 3500
dives test log with mobile-on-desktop:
Initialization of the fulltext: 1350 ms -> 730 ms (-46%)
Initialization of the divelistmodel: 689 ms -> 113 ms (-83%)
Let's remove the fine-grained notification. There *is* a visual
indication of work-in-progress anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The compiler complained about this and it seems the
function does not need it.
Additional-test-suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The planner does not know about events except gas
changes. But if the dive comes from the log, we
should preserve the dive computer events. At least
those that happend before we started to delete
waypoints to let the planner take over.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes a bug: when deleting a picture when multiple dives
were selected, possibly the wrong dive was invalidated.
Thus, the dive wouldn't have been saved to the git repository.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This isn't really a useful performance improvement, but it's still better,
IMHO, because we don't have a less specific match later on potentially change
an already executed match.
Because of our coding style the comment covering multiple cases of Pelagic dive
computers now is associated just with the first of those entries. I don't see a
way to do this differently without being in violation of our coding style, so
I'll just keep it like this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
