We have two prefernces determining the deco_mode (BUEHLMANN vs VPMB
vs RECREATIONAL): One for the planner (deco_mode) and one for
displaying dives (display_deco_mode). The former is set in the planner
settings while the latter is set in the preferences.
This patch clears up a confusion which of the two to use by introducing
a helper function that selects the correct variable.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We had (in the wrong place, imo) a new feature that
should differentiate the different deco_modes, you could
plan your dive in buelhman and see it in vpm-b, for instance
but both of them accessed the same pref.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove a few uneeded lines and add more loading code for
the preferences.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Stretch out the yellow zone of the HSV scale, because the yellow band of the
true scale appears narrow.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Color "undersaturated" values relative to inert gas pressure of gas being
breathed, rather than relative to inert gas pressure of air.
Also change slightly the point at which bright green (hue = 120 deg) from 10%
of M value to 0% of M value (=ambient pressure).
Other than the slight shift in lower bound of the green-red scale, this does
not affect the colors of the tissues with inert gas pressure greater than
ambient pressure, which are relative to the Buhlmann M value.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By drawing oversize dots for each data point, dots were overlapping such that
the change in tissue presssure wasn't displayed at the right time - typically
out by 1-2 minutes, depending on dive duration.
Drawing a line between discrete points, the data points don't overlap and
change in tissue pressure is displayed at the right time.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
...otherwise we show garbage before the mouse enters the
profile for the first time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for
planning dives and prefs.vpmb_conservatism for profile ceiling display of
saved dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I separated out the color scaling and slightly simplified the expressions.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Setting the pen to non-cosmetic means the painted width scales when zoomed
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the heat map use a colour scale similar to that by Kevin Watt, as used in
Simon Mitchell's presentation, Decompression Controversies
https://www.youtube.com/watch?v=UY61E49lyos&t=2090&authuser=0
Undersaturated: cyan -> blue ->purple -> black
Supersaturated up to M value: black -> yellow -> red
Exceeding M value: red -> white
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This replaces the tissue percentage graph that probably nobody ever
understood with a heat map like the one used in the discussion
of bubble model deco. The information shown is the same but the
saturation is now in the color while the tissue determines the y
position.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This matches the strings for a couple of generic events from
libdivecomputer that should obviously info or violation events, and
matches quite a few more from the Uemis downloader (as those are much more
specific).
Everything else is still shown as a yellow warning triangle.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far this is only supported in the Suunto EON Steel backend, but we
should try to add this to others where we have such a distinction (and
maybe assign different values to the predefined libdivecomputer events).
This also adds three new icons for info, warning, and violation. The
warning icon we had already, but I drew a new one from scratch to have it
match the violation icon.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This becomes obvious with the new severity bits introduced in the Suunto
EON Steel parser.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Determining the correct cylinder index from a known gas mix can be
complicated, but it is trivial to look up the gasmix from the cylinder_t
structure.
It makes sense to remember which cylinder is being used. This simplifies
handling changing a cylinder's gas mix, either directly by the user, or
indirectly in the planner. It also permits tracking of multiple cylinders of
the same mix, e.g. independent twins / sidemount.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's just annoying and pointless. So we arbitrarily say that surface
events within the first and last 30s of the dive are suppressed.
But we now do show them in the middle, in case the sampling rate is too
low, and the profile itself doesn't show that we got to the surface.
These heuristics still needs tweaking - if the profile already shows
that we're at the surface, then we should probably suppress the event
triangle.
But in the meantime this at least gets rid of the truly pointless cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make them use indices into the plot-info, fix calculation of average
depth, and fix and add comments.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that gas switch events always have indices into the cylinder table,
start using that to look up the gas mix from the cylinders rather than
from the gas switch event itself. In other words, the cylinder index is
now the primary data for gas switch events.
This means that now as you change the cylinder information, the gas
switch events will automatically update to reflect those changes.
Note that on loading data from the outside (either from a xml file, from
a git/cloud account, or from a dive computer), we may or may not
initially have an index for the gas change event. The external data may
be from an older version of subsurface, or it may be from a
libdivecomputer download that just doesn't give index data at all.
In that case, we will do:
- if there is no index, but there is explicit gas mix information, we
will look up the index based on that gas mix, picking the cylinder
that has the closest mix.
- if there isn't even explicit gas mix data, so we only have the event
value from libdivecomputer, we will turn that value into a gasmix,
and use that to look up the cylinder index as above.
- if no valid cylinder information is available at all, gas switch
events will just be dropped.
When saving the data, we now always save the cylinder index, and the gas
mix associated with that cylinder (that gas mix will be ignored on load,
since the index is the primary, but it makes the event much easier to
read).
It is worth noting we do not modify the libdivecomputer value, even if
the gasmix has changed, so that remains as a record of the original
download.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caches the git ID for the dive on load, and avoids building the
dive directory and hashing it on save as long as nothing has invalidated
the git ID cache.
That should make it much faster to write back data to the git
repository, since the dive tree structure and the divecomputer blobs in
particular are the bulk of it (due to all the sample data). It's not
actually the git operations that are all that expensive, it's literally
generating the big blob with all the snprintf() calls for the data.
The git save used to be a fairly expensive with large data sets,
especially noticeable on mobile with much weaker CPU's. This should
speed things up by at least a factor of two.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way warning icons and tank change icons and other event markers are no
longer ridiculously tiny on retina screens. Oddly this doesn't appear to be
needed on Android, only on iOS.
Fixes#1033
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently, the gradient factors displayed at the top of the profile are the
gradient factors set in preferences. This is correct for saved dives, but
when planning dives, the gradient factors displayed at the top of the profile
should be the gradient factors used in the plan.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in the context of the iOS port and shouldn't impact any of the
other builds.
[Dirk Hohndel: refactored the iOS patches]
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We (ab)use fake_dc() to create a pleasing profile for a manually added
dive. Based on it's intended use, fake_dc() simply handed back a dc
structure that pointed at staticly allocated samples - that's obviously
(now that I think about it) going to blow up in my face if I edit a
manually added dive more than once.
So now we have an option for fake_dc() to actually allocate the samples -
this way the rest of the code can treat these samples as we would treat
samples created any other way. We can free them and replace them with a
new set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were creating a couple dozen objects that we never needed and because
of that triggered several dozen callbacks whenever the model data changed.
All for UI elements of the profile that are either not used in the mobile
app (like the calculated ceiling or the partial pressure / tissue
saturation graphs), or are only useful when using the profile
interactively (which we also don't do on mobile).
I don't know if this will make a significant impact on performance, but it
seems like the right thing to do either way.
A positive side effect is that the odd blue line on top of the rendered
profile is gone as well.
Fixes#1007
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
