We check in get_gaslist is_gas_used, so if were going to be consistent
about what we return from get_gaslist and in get_gas_used, only return
gas volumes that we actually consumed during the dive.
The problem now this fixes can be seen in dives/test10.xml
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous show and save code would have aborted at the first invalid
weight system. This makes sure we save and show all weight systems up
until and including the last valid.
If we had:
integrated: 1kg
belt: 2kg
ankle: 3kg
And changed belt to 0 kg, we would have only saved integrated 1kg, and
nothing about the belt or the ankle weights. This will save all of them,
and show all of them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code aborted at the first invalid cylinder. This instead finds
the last valid and prints all the ones up until that one.
Fixes#295
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the Mach-O library ID to match the install path. The
library ID is copied by the linker when Subsurface is linked against
Marble and can be seen with otool -L. That's also what macdeployqt
uses to find the dependencies: if the file matching the name in otool
-L exists, macdeployqt will deploy the library and update the search
paths.
Conclusion: after this patch, the "make mac-deploy" command will also
deploy Marble correctly.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just a temporary workaround while we figure out why the Windows
build doesn't load SVGs correctly. To avoid messing with the build system
I simply switch to using PNG everywhere.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive, a group of dives or a trip we need to make sure that
we don't lose track of which dives and trips were selected. Otherwise we
might act on dives that DON'T appear selected in the UI but that we think
are still selected.
Fixes#304
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have allot of helpers, use them instead of local variants.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since all internal units are in mm we needed to only update what's shown
on the interface.
Fixes#299
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a workaround, I plan to remove that toolbar from inside
of the Profile for the next version, but since it's there for now,
let's keep it.
This patch hides the toolbar when the zoomLevel != 0, since the
profile is unclickable while zoomed...
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch remembers the trip selection across the Dive Tree Model.
It's a tiny bit big because we used to have a variable 'selected
trips' that's now calculed dynamically - this is more future proof.
This is a start of Un-cluttering the view ( for 4.1 I hope to reduce the
code in this class to nearly a half. )
Fixes#303
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When resizing the ProfileWindow and the tooltip was out of
boundaries, it was really out of boundaries and there was
no way to get it back ( besides re-expanding the window. )
this patch moves the tooltip to (0,0) and don't save that
position, so when the window is re-expanded, it will move to
the correct location again
Fixes#237
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fix for 'double click on the map shouldn't zoom' had broken the
selection of the current location for the selected dive, this patch
fixes that.
See #291
Signed-off-by: Vinicius Machado <vsmachado@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use if around the attribute, instead if a choose inside. Its less
horrible on the eyes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I managed to mess up and grab parts of my unfinished otu field code and
squash it into the wrong patch. Here is the code for stopdepth, and now
the code sets the in_deco flag to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a crash when you have non-trip dives in your logbook.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds trip based statistics to the Yearly Statistics
view.
Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the INSTALL instructions. The line to install home-brew is missing the “install” at the end and a small typo in the marble compilation instructions.
Saludos,
Pablo.
From 152395059af546273f38721e5c8ae1d19e2d73c3 Mon Sep 17 00:00:00 2001
From: Pablo Wolter <pwolter@gmail.com>
Date: Sat, 23 Nov 2013 16:10:02 -0800
Subject: [PATCH] Small correction to the installation instructions. Added
"install" to the end of the ruby command to install homebrew and a typo in
the compilation instructions for marble.
Signed-off-by: Pablo Wolter <pwolter@Pablos-MacBook-Pro.local>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this every cylinder downloaded from a divecomputer that doesn't
provide cylinder data, and every cylinder manually added anywhere will
default to the default cylinder that is set in the preferences.
For people who most of the time dive with the same equipment (always on
dive boats with AL80, or almost always diving their personal HP119) this
should be a nice improvement.
If you don't like this behavior, simply leave the default cylinder setting
in the preferences empty.
This commit also fixes the incorrect s->value call (should be
s->setValue). I wonder what this did to the default filename before...
Fixes#145
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't do anything with this just yet.
And frankly, a drop down of the cylinders that we know of would be even
better. But hey, it's a start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is super-simplistic and also is kinda wrong. It forces all tanks that
haven't been specified by the DC (so far only Atomics Aquatics Cobalt and
UEMIS Zurich (which doesn't even use libdivecomputer) to be AL80. Just as
we used AL80 as default for manually adding tanks.
Obviously this needs to become an option where the user can pick.
See #145
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive and clicking save button on menu bar, it saved
dive information but didn't mark dive as not being edited anymore.
For closing file, user should always click on the save button on
the bottom of the page and then saving it.
Now when clicking save button on menu bar, it will call the
accept_changes before saving to disk.
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On a 32bit machine this will truncate values with MSB set to 0x7fffffff
Fixes#164
(thanks to Linus for pointing me in the right direction)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Actually, it's not so much "work around", it's just "disable our eye candy" for
tags on Mac. This is quite frustrating. When we do anything that has the
QPainter touch the widget from our GroupedLineEdit::paintEvent() path then the
QPlainTextEdit::paintEvent() doesn't render the text of the tags.
Fixes#298
Sort of.
But I guess tag text without eye candy is better than eye candy without tag text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Later we spacifically enable the scale, but Dirk asked me to
use the bare minimum of marble.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Marble is a weird piece of Qt software, it seems that it wasn't
thought of being a library when first written. Most of its features
are not achieved by subclassing && overriding one of Qt default methods,
instead we need to eventFilter for almost everything ( which is a pain,
and a bit error prone - see our combo box delegate *puke*. )
This one's ready, only one thing though - if we want to implement
our own context menu, we will need to use the eventFilter, and not
the contextMenuEvent.
Fixes#291
[Dirk Hohndel: this does not disable the context menu for me...]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A user could have hiddden and lost any of the four panels
on the interface. Now when he chooses 'show all', if a
part of the interface is hidden, it will be shown again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think we should actually fill the app with tooltips and
whatsthis hints. justsain ;p
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better positioning of the text on the table cells. On KDE systems the
text got too near the line that divided the cells, this way the text is
placed on the middle of the cell.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the correct sizes of the tables when first opened. It was
defaulting to 'resizeToContents', but most of the cases when first opened
we got no content, and this was bad. Now I'm defaulting to 30 when on the
'REMOVE' column and 80 on other columns.
Fixes#189
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a gaschange to air happened, the code did
name += name=+ tr("air") which probably was due to the block being just
confusing with all the ?:
Unrolls to proper if statements, and fixes the bug.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we add more fields, we don't need to renumber the whole thing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a checkbox to be able to import csv files without temperature.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rewires things a bit to make room for new features coming.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before, when clicking the OK button on the preferences GUI, we were
updating in-memory preferences from the GUI, saving them to the
configuration file from the GUI, reloading from the file to the
in-memory preferences. Then, to add to the ducplication, when the
application was exiting, some fields were saved again.
Basically the first step and the last step were useless appart from
the fact the the other steps where missing a few fields here and there.
This patch removes the first step and fixes the missing fields.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
ACKed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an ugly hack as it partially breaks the ability to abort a selection
(so if you click outside of the combobox, the last value you hovered over is
selected). But this seems much better than not being able to select a different
tank at all.
Fixes#275
(and by 'Fixes' I mean "hacks to sort of make work"... but the trac automation
is rather inflexible in which words it understands...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This (together with the commits fixing the QMessageBox title) should
finally close all the issues in bug 250.
Fixes#250
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
