We always thought that a dive had a dive site
and that a dive really exists. but if we go
to add dive and then go to add dive site,
none of those exist yet and then we got a crash.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As a side effect this changes the signature of plan(): Before it
returned an int that was supposed to be possibly an error but
we never bothered to check it. So now it's bool indicating if the
planner did add stops.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
taglist_added() simply figures out the tags that are in the new list but
not in the original list.
taglist_dump() makes debugging things easier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
save_one_dive_to_mb() is very useful (but there was a namespace collision
with another helper in save_git.c)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a new divelist context menu entry which asks for a URL. The file
is retrieved and if it is an image it is added to the cache and the url
is associated to dives as with local files.
NB this currently only works with URLs pointing directly to images. But it
should not be too hard to add the possibility to add a direction via an html
file and its image tags.
To test: open dives/test43.xml and delete the image and then add the URL
http://euve10195.vserver.de/~robert/wreck.jpg
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Factor out image load to find timestamp from loop over dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use more explicit variabel names and make the get timestamp function actually
return the timestamp rather than getting a pointer argument
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we delete a cylinder the gas changes in that dive may have to be
adjusted. We didn't do this at all in the past. With this commit we should
be doing this right for a single dive that is being edited.
This does NOT handle multiple dives being edited at the same time (or more
specifically - if you have multiple dives selected and delete a cylinder,
the dives that had the same set of cylinders (other than the displayed
dive) will get that particular cylinder deleted, but won't have their gas
change events (and sensor data in the samples) adapted.
Possibly we should simply prohibit deleting cylinders when more than one
dive are selected.
See #834
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XSLT conversions create V2 XML files, but we shouldn't abort when we parse
those without having the user informed about the potential slowness - all
XSLT based imports are slow, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This add support for Seabear's new import format that is used by H3 and
T1. In the future also the Hudc should switch to the new format. The
main difference to the old one is that time stamps are no longer
recorded in the samples, but intervali is specified in the header.
The header contains other useful information as well that we should
build support for. E.g. surface pressure, gas mixes, GF, and mode might
be useful additions later on.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seperated getting image timestamp from picture_load_exif_data() and
ShiftImageTimesDialog::syncCameraClicked() into picture_get_timestamp()
and seperated checking timestamp from dive_create_picture() to
dive_check_picture_time().
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon successfull reading an image file, this computes a SHA1 hash of the
image and saves it with the picture tag in the log file. When a file is
not successfully loaded (for example because the log was created on a
different computer) we look up the hash in a dictionary that maps hashes
to local file names.
That dictionary (actually two for both directions), is loaded on startup
and saved upon destruction of the main window.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is somewhat invasive as aborting the XML file read requires us to
report things up the recursive parsing chain.
What we really need to do here is to ask the user how they want to use the
data from reverse geo lookup. But for now we only warn about the fact that
this can take a while.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And hook things up when double clicking the globe.
The user experience isn't consistent with what we do on the main tab
(i.e., no coloring of fields that are changed), but it seems to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this all references to these members should be gone and all the code
should be switched over to the dive site infrastructure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit awkward now. We are downloading what looks like fake dives
in the v2 format. So we create a dive site for every single fix.
After we merge those new dive sites into the existing dives we need to
throw away all the dive sites that weren't used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the last few dozen commits change the format in irreversible ways
and could therefore be destructive and lose data for testers of the
development version, let's try to be extra careful and create "special"
backup files that aren't overwritten by subsequent backups. At least this
way people can go back to the previous state.
Of course people using the git backend don't have to worry about this as
they always can go back to any earlier save.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Read and write divesite sections in the XML file.
Read divelogs of version 2 and create dive site structures on the fly.
Read version 3 files that have divesiteid instead of location / gps.
Saves version 3 files where dives no longer have location and gps but
instead refer to a divesiteid
The commit contains quite a few fprintf(stderr,...) in order to allow
better monitoring of the parsing / transforming of locations and gps to
dive sites. This will need to be removed later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If current_dive and displayed_dive still have the same tags then we
shouldn't touch the tags of other selected dives.
Fixes#826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The ratio between SAC and oxygen metabolism rate can be assumed constant
but not the metabolism rate. So we better base our calculation on the ratio
that uses the SAC from the preferences as that pairs well with the O2
consumption from the preferences.
Hence we ran remove the sac parameter from fill_pressures().
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When planning a dive, the gas consumption is based on a user configured SAC.
Thus we should use that SAC and not try to recompute it from samples.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will allow us to download the dives from the dive computer into a
separate table just for that purpose and not into the main dive_table.
I really dislike the code that's in place that dates back to the very
earliest code written for Subsurface. Dumping the dives straight into the
main dive_table seems really stupid to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This parses the dive profile from Divesoft Freedom log file. Only the
depth profile is currently supported. There is also something wrong as
the log file cannot be given as parameter but must be opened or imported
once Subsurface is running. Note that so far no metadata is parsed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code sets the parameters properly to support the new fields in
manual CSV import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This implements importing of dive profile and temperature graph along
with some meta data from a Cobalt Divelog database.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We are quite inconsistent when it comes to reporting back errors.
One case where this caused somewhat unexpected behavior was when the
user would try to open a .csv file by passing it as command line
argument. The file was silently ignored, but treated as if it had been
opened successfully.
Now we issue a somewhat reasonable error message.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We when comparing floating points we do a relative comparison of the difference.
This fails when both numbers are (exactly) 0.0 which happens to occur when plotting
an O2 graph without o2 data resulting in both min and max for the y-axis to be 0.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the meaning that _the_ cylinder (as we treat it in OC dives) is the
diluent cylinder (rather than the O2 cylinder). This eliminates special
cases. Now, for CCR, we have to handle the O2 cylinder in addition
(rather than the diluent in addition).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch is bigger than necessary because I also renamed the
get_cylinder_use() function to the much more accurate
get_cylinder_idx_by_use().
If we have no gas changes (except for a possible explicit first gas),
(which in the CCR case also means no bailout), this code will give you
correct per cylinder depth and duration for oxygen and diluent and
therefore create more reasonable gas consumption data for CCR dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oddly we already had code to load this from XML, but nothing else.
This makes the load from XML work like the rest of our code and adds the
save to XML plus the load and save for the git format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a time linear gas interpolation strategy. Some minor changes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This implements import from Suunto DM5 database, but there is something
wrong with some of the sample dives in the database I received as
sample. It seems that we should detect missing/bogus data and treat it
properly as divelogs.de does with the same dives. Anyway, when we have
proper data, this import appears to produce sensible results.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
