For our usage the method will acept UTF-8 paths,
which are converted to UTF-16 on Win32.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Depth is often mentioned in a length unit, but what we care about is
pressure. When diving in fresh water the pressure is lower than the same
depth in salt water. This adds support for using different salinities in
planning.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way other parts of the code can act on the "hidden_by_filter" state.
This also cleans up the way we track if a dive is hidden - do it in the
multi filter instead of the individual filters.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This recognizes recognize some strigns (serial number and firmware
version), and the ones that it doesn't recognize it adds as extra data
using Dirk's new interface.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This extra_data is designed to hold unstructured data from the dive
computer. Things like battery voltage. Deco algorithm. Whatever the dive
computer wants to report to us.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculations for passive semi-closed rebreathers are pretty much like OC
except the pO2 is lower bey a certain (SAC dependent) factor. This patch
introduces the corresponding calculations in case dctype == PSCR which is
so far never set and there is currently no UI for these calculations. As
pO2 is SAC dependent it takes a certain attempt at getting it and drops to
defaults from the prefs otherwise.
As there is no UI at this point and I also don't have any dives, this has
not received much testing, yet, but it compiles. At least.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently the gas pressures stored in structures of pressure are
calculated using the gasmix composition of the currently selected
cylinder. But with CCR dives the default cylinder is the oxygen
cylinder (here, index 0). However, the gas pressures need to
be calculated using gasmix data from cylinder 1 (the diluent
cylinder). This patch allows setting the appropriate cylinder
for calculating the values in the structures of pressure. It
also allows for correctly calculating gas pressures for any
open circuit cylinders (e.g. bailout) that a CCR diver may
use. This is performed as follows:
1) In dive.h create an enum variable {oxygen, diluent, bailout}
2) Within the definition of cylinder_t, add a member: cylinder_use_type
This stores an enum variable, one of the above.
3) In file.c where the Poseidon CSV data are read in, assign
the appropriate enum values to each of the cylinders.
4) Within the definition of structure dive, add two members:
int oxygen_cylinder_index
int diluent_cylinder_index
This will keep the indices of the two main CCR cylinders.
5) In dive.c create a function get_cylinder_use(). This scans the
cylinders for that dive, looking for a cylinder that has a
particular cylinder_use_type and returns that cylinder index.
6) In dive.c create a function fixup_cylinder_use() that stores the
indices of the oxygen and diluent cylinders in the variables
dive->oxygen_cylinder_index and dive->diluent_cylinder_index,
making use of the function in 4) above.
7) In profile.c, modify function calculate_gas_information_new()
to use the above functions for CCR dives to find the oxygen and
diluent cylinders and to calculate partail gas pressures based
on the diluent cylinder gas mix.
This results in the correct calculation of gas partial pressures
in the case of CCR dives, displaying the correct partial pressure
graphs in the dive profile widget.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't Cobalt specific, this is specific to dive computers that
indicate the first tank that's in use with a gaschange event that
coincides with the first sample.
We need to make sure that we suppress showing that gas change event
(regardless which cylinder it goes to) and instead set the correct
cylinder index from the very start of the dive.
This works with the test data I have and doesn't seem to break thing with
any of the files that I tried... but I'm worried that this is not the
right way to do things.
Fixes#742
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents a warning caused by -Waddress, that the address
of 'displayed_dive' will always be defined.
Exact macro variant suggested by Dirk.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will parse date information from Seabear log file and skips the
"header" data to allow parsing of the CSV content.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support for importing the logs from a Poseidon MK6
rebreather. This DC produces logs that contain of a .txt file that has
all the meta data and a .csv file that contains the sample readings. The
CSV file is different from the others in that it has a line per each
sample reading at given time. Thus we have to merge all the lines from
one point in time into one sample reading of ours.
[Dirk Hohndel: addressed some compiler warnings]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The latest CCR patches had rendered the planner not usable for CCR dives.
This patch corrects this (and reenables the CCR set point column for
segments). The problem was that a new member setpoint of struct divepoint
had been introduced, but there was already po2 which had the same meaning.
This patch merges the two and renames them setpoint to prevent future
confusion.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch responds to the side effects that the CCR code has had with
respect to ceilings in OC dives and dive plans. Dive ceilings are now
calculated correctly again.
The following were performed:
1) remove the oxygen sensor and setpoint fields from the gas_pressures
structure.
2) Re-insert setpoint and oxygen sensor fields in the plot_data structure.
3) Remove the algorithm that reads the o2 sensor data and calculates the
pressures.po2 value from function fill_pressures() in dive.c and save
it as a separate function calc_ccr_po2() in profile.c.
4) Activate calc_ccr_po2 from function fill_pressures() in profile.c.
5) Move the relative position of the call to fill_pressures() within the
function create_polt_info_new() in profile.c.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds code to the function fillpressures() in dive.c to
allow calculating o2 pressures, based on the data from the po2
sensors in the system. The following changes were made:
1) add code to perform po2 calculations for CCR with 1, 2 or 3
oxygen sesnors.
2) Add four fields to the gas_pressures structure in dive.h. This
allows communication of data between the function that calls
get_pressures() and the return of partail pressure values to the
calling function.
3) Delete the fields for setpoint and gas partial pressures from
the structure plot_info. All partial pressures (from instruments
as well as calculated) now reside in the pressures structure
that forms part of plot_info.
4) Perform changes in several parts of profile.c to make use of the
pressures structure in plot_info.
[Dirk Hohndel: yet again massive whitespace cleanup]
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch does three things:
1) A new function fill_o2_values() is added to profile.c. This
fills all oxygen sesnsor and setpoint values that have been
zeroed before in order to save space in the dive log. This
recreates the full set of sensor values obtained from the
original CCR xml log file.
2) Function fill_o2_values() is activated in function create_
plot_info_new() in profile.c
3) The calling parameters to function fill_pressures() in dive.c
are changed. The last parameter is now a pointer to a structure
of divecomputer. This will be needed in the last patch of the
present series of three patches.
[Dirk Hohndel: minor whitespace cleanup]
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decode the gasmix data into a sane format when creating the event, and
add the (currently unused) ability to specify a gas change to a
particular cylinder rather than (or in addition to) the gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch introduces a new structure holding partial pressures (doubles in bar) for
all three gases and a helper function to compute them from gasmix (which holds fractions)
and ambient pressure. Currentlty this works for OC and CCR, to be extended later to PSCR.
Currently the dive_comp_type argument is unused.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch implements a separation of the code for gas pressure
calculations from the rest of the code in profile.c. The latter
file is now split into: profile.c and gaspressures.c. The
details of the transferred functions is given at the top of
gaspressures.c. The following chnages were made:
1) dive.h: The function types of calculate_depth_to_mbar
and depth_to_mbar were made non-static in order to make them
available within gaspressures.c.
2) profile.c: Prototypes for the functions in gaspressures.c
were inserted at the top of profile. Ten functions were
transferred from profile.c to gaspressures.c
3) gaspressures.c as well as a short header, gaspressures.h
were created.
For the gas pressure calculations for CCR dives, gaspressures.c
forms the immediate basis for further code development.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this information, when we re-plan a dive we can bring the user right
back to the point where they ended - they have the waypoints in the dive
pointes table and handles are shown on the right points in the profile -
and the rest of the dive is once again calculated by the planning
algorithm.
For now this state is lost when saving the dive file as we don't add this
flag in the sample to our saved files. So if we don't find any samples
marked as manually added we add ALL of the samples as way points on the
diveplan and the user has to manually remove the ones that were
calculated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old implementation was... let's call it creative.
This tries to actually get things right instead of using magic.
Don't pretend that double values are ints.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit doesn't do anything, yet. It just puts in place helper
infrastructure that will later allow us to cut and paste parts of the data
of one dive into another dive (or set of dives).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far, the fields for the two SAC rates did not show a unit and were implictly l/min.
Now they respect the settings for volume units. This was harder than I thought for two reasons:
1) Imperial units for SAC are cuft/min but a typical value would be .70. So I made the point
the field prefix and what is entered is actually hundreth of cuft per minute.
2) I had to get the rounding right in order not to get effects like 20l/min become .70 cuft/min (19800 ml/min
internally) which would then become 19l/min when switching back.
While being at it, I gave the gradient factors '%'-signs as units.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had pointers to data structures on the stack which we frequently
reallocated. These data structure contain basically a filename and an
offset. We then create a hash of the pointers to those datastructures with
the filename being the key. And then we passed those pointers around
through a Qt model(!!!) only in order to then later look up by filename
what the offset might be.
I am at a loss for words for the lunacy behind this design.
How about we just remember the offsets and pass the integers around?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With very low values of GFhigh and setting the last stop depth to 6m it
is possible to create dives that need infintie decompression time.
This ends deco after 48h and replaces the dive plan with an error message.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost invisible, mostly looking like an odd bug in the profile code,
there was a tiny red line at depth 0 in the planned profile. Turns out
that was the missing mean depth. We didn't populate enough data in the
dive computer of the dive we generated from the plan (and the length of
the depth line was incorrectly determined by the duration of the dive
instead of the duration stored in the dive computer).
Fixes#570
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets us consistent date format everywhere. The reordering of month
name and day of the month didn't work correctly on Windows, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the remove_picture functionality, with code
shamelessy stolen from remove_event, and hoock it
up with the interface.
Fixes#650
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
is_cylinder_used uses get_cylinder_index as underlaying function that
does the right thing with with respect on how to find the closest
matching cylinder, and handles both types of gaschange events correctly.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To obey <xsl:output omit-xml-declaration="yes"/> element
one should rely on libxslt to do its job instead of writing
document himself.
Discussion on this subject can be found at
http://comments.gmane.org/gmane.comp.gnome.lib.xslt/3839
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were actually searching dives which match the dowloaded position
fixes. So we're also trying to take into account if the fix is automatic
or no based on a limited amount of predefined strings (bad idea, as the
user can change in companion app settings the predefined string).
This way, in actual implementation, if program concludes that a fix has
been manually got or, simply, the user is unlucky enough to have all the
position fixes out of the dive time, find_dive_n_near() function will
pair fix and dive in an ordered way (1st fix -> 1st dive; 2nd fix -> 2nd
dive ...) which is probably erroneous, except for manual position fixes.
BTW actual implementation can't pair the same gps position with more
than one dive, which would be the case, e.g. in repetitive dives while at
anchor in the same point.
The patch changes the logic:
- Search positions for defined dives (instead of dives for defined
positions) without care if position has manually or automatically been
set.
- Only take care of those dives that don't have a position yet.
- It makes two assumptions:
a.- If the position fix has been taken during the dive time, is
correct. If there are more than one inside the dive time, takes the
first one (closest to the DC's reported time).
b.- If not during diving time, the correct one is the nearest fix
before the dive begins (also the usual case if manually fixed from the
smartphone just before jump into the water). But will work too if there
is only one fix *in SAME_GROUP range* after the dive (another usual
case).
- Finally, as copy_gps_location() in dive.h is used only here, let it
take care of naming the dive if user hasn't named it yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't like that the event structure includes the variable length array.
That really makes it a pain to change the name of an event (on the flip
side, freeing events is easier I guess).
Anyway, to correctly rename an event we need to actually remove the event
from the correct dc and then add a new event with the new name. The
previous code was insane (it only worked if the new name was of smaller or
equal length, otherwise it had a beautiful buffer overflow).
And of course we need to do this both for the current_dive and the
displayed_dive.
Fixes#616
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since earlier have we had support for our own calculated TTS. This adds
support for holding TTS values reported by a dive computer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed vs unsigned comparisons are such a pain. Since we want offsets to
be +/- 30 minutes around the dive we need to allow negative offsets - but
duration_t was defined as uint32_t.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The semantic of fo2==fhe==0 to mean "same gasmix as before" apparently
is not used anywhere and gets in the way of the semantic "this is air".
If there is really need for mix meaning "same as before", please use another
value, e.g. one with a specific negative percentage.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When adding a dive we don't have SAC data so we should simply have the
user manually enter their gas consumption. That still doesn't work, but
this is one required step to get it to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is kind of the inverse to copy_dive(). Instead of duplicating all the
data that the dive points to, it moves it to a new struct dive and zeroes
out the old one so there are no two sets of pointers to these data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can safely copy around dives (specifically, copy the dive to
be displayed / edited into the displayed_dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is massive confusion about what we display when and where and which
dive structure (or pointer to a dive structure) contains which information
at which stage. This is the first step towards restructuring all of this.
This creates a global variable displayed_dive which at any point in time
should be what is displayed on screen (both in the profile and in the
maintab). It removes the editedDive concept from MainTab.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the worst gase you have to provide gas for your buddy during all the
ascent. So you should have the amount of gas used in ascent as a reserve.
This patch makes the planner notes display that value separately.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Spin boxes for pO2 are now hooked up to preference values. Adding new
cylinders (or changing their fo2) computes the MOD accordin to the current
value of decopo2. Note that chaning the limits for deco pO2 does _not_
automatically update the switch depth of all cylinders as those might have
been manually entered.
Furthermore, MOD has now to option of rounding to multiples of a given
depth. That is used for the automatic switch depth which are now always
multiples of 3m (so that EAN50 is switched to at 21m rather than 22m).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to compile Subsurface with strict C or C++ mode.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch lays the foundation for differentiating
between open-circuit(OC)dives and rebreather dives
(CCR). The following were done:
1) In dive.h add an enum type dive_computer_type
2) In dive.h add two more fields to the dc structure:
a) dctype (an enum field indicating dc type)
b) no_o2sensor (indicating number of o2 sensors for this dc)
3) In parse-xml.c add a function trimspace that strips any
whitespace from a string. This is used by two functions:
utf8_string as well as by get_dc_type, described below.
The pointer to buffer is not changed in order to ensure
consistency when the buffer is freed.
4) In parse-xml.c add a function get_dc_type. This parses the
dc_type string from xml and assigns an enum value which will
later be returned to the function that parses
the dc variables.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This can't be the only dive computer, of course. Goes nicely with the
ability to reprder them.
Fixes#551
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also change the on file XML to be even easier to read by making it a
duration as well (which gets us '32:34 min' instead of un-typed seconds).
This is backwards compatible, it will happily read what was written with
the previous commit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It makes no sense to store a 64bit time stamp with every picture. Even the
32bit offset (in seconds) from the dive start is WAY overkill. But
switching to that makes the code much more simple in a number of spots.
And makes what is saved to the XML file easier to read, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was only semi-implemented the first time around. Now we really only
copy the ones that are indeed used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) All the variables in the sample structures are strongly typed
2) Two additional types were declared in units.h:
o2pressure_t
bearing_t
3) The following variables were added:
diluentpressure
o2setpoint
o2sensor[3]
4) Changes to a number of files were made to chanf
sample->po2 to sample->po2.mbar
bearing to bearring.degrees
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The picture list is a single linked list where the pictures have a node to
their next element. When adding the same picture to two dives, things got
way way wrong and crashes were appearing.
This will replicate the information (filename, latitude and longitude) for
each dive that has the picture, BUT it still tries to save as much as
possible on the actual pixmap.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit breaks the loading of images that were done in the divelist
into smaller bits. A bit of code refactor was done in order to correct the
placement of a few methods.
ShiftTimesDialog::EpochFromExiv got moved to Exif::epoch dive_add_picture
is now used instead of add_event picture_load_exif_data got implemented
using the old listview code. dive_set_geodata_from_picture got
implemented using the old listview code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the FOR_EACH_PICTURE macro and the code for picture count.
This uses C99 - but I will keep it like this and wait for dirk
to scream at me.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a picture_list struct that will hold all the pictures relative to a
dive. Before we used to hold events for the pictures, but an event is a
much bigger struct so this will save a bit of memory, and we will also
stop to use magic flags and special treatment for pictures on the dive
profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the divedatapoints and functions that deal with them.
It changes plan_add_segment(), create_dp(), gasToStr(), and tankInUse() to
consume gasmix instead of o2/he.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead calculate this information on the fly, taking into account all
dive computers on the dive in questions.
There is one wrinkle to this - previously we abused the '.used' member to
make sure that a manually added cylinder didn't disappear the moment it
was added (think of the workflow: you add a cylinder, then you add a gas
change to that cylinder -> right after you add it it is unused and would
not be shown).
I am thinking that we might have to add the "manually_added" property to
the properties that we store in XML / git.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should never pass permille values around as integers. And we shouldn't
have to decode the stupid value in more than one place.
This doesn't tackle all the places where we access O2 and He "too early"
and should instead keep passing around a gaxmix. But it's a first step.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We tracked gas used by simulating a dive with a cylinder - but for that we
need a cylinder size and working pressure. If the user just enters a gas
but no cylinder data (likely in order to figure out how much gas is used
so that she then can pick a big enough cylinder), we didn't show any gas
consumption.
It kinda sucks to add another member to the cylinder structure, but this
seemed far more reasonable then some other, global structure that
independently tracks gas usage. This just seemed to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We want the disclaimer in the final dive that can be printed, but it's
distracting when shown while planning the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is a little bigger than I usually prefer, but it's all
somewhat interconnected.
- we pass around the cylinders throughout the planning process and as we
create the plan we calculate the gas consumption in every segment and
track this both in the end pressure of the cylinder and over time in
the samples
- because of that we no longer try to calculate the gas consumption after
being done planning; we just use what we calculated along the way
- we also no longer add gases during the planning process - all gases
have to come from the list of cylinders passed in (which makes sense
as we should only use those gases that the user added in the UI or
inherited from a the selected dive (when starting to plan with a dive
already selected)
With this patch I think we are close do being able to move all of the
planning logic back into the planner.c code where it belongs. The one
issue that still bothers me is that we are juggling so many dive
structures and then keep copying content around. It seems like we should
be able to reduce that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When planning a dive, the dive could use more gas than is in the cylinder.
So getting a negative end pressure is a useful indication to the user that
there plan might not be a good one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use mod calculations on multiple places, so make a separate helper
from it with proper types.
The "clumsiness" of defining a local variable to pass into the function
and out from it comes from the discrepancies in how c and c++ handles
initializations of variables in a struct.
Thanks goes to Tiago and Linus for pointing me in the right direction.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic of removing the event was in the UI, and this makes
the code harder to test because we need to take into account
also the events that the interface is receiving, instead of
only relying on the algorithm to test.
so, now it lives in dive.h/.c and a unittest is easyer to make.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No attempt is made to ensure that what the user does is sane. So this can
result in duplicate numbers, non-consecutive numbers, non-monotonous
numbers, whatever floats the users boat.
You can renumber a single dive or all selected dives (with a starting
number given that is applied to the oldest selected dive and then for each
newer selected dive that number is incremented by one).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a dive has multiple dive computers we enable a special context menu
when the user right-clicks on the dive computer name AND is not already
showing the first dive computer. In that case we offer to make the
currently shown dive computer the first one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The original name was a really bad choice as we have a 'diveid' as part of
struct divecomputer - and that is not the diveid that is being used here.
Instead we use the 'id' member of struct dive which holds the "unique ID"
for this dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit renames getDiveById to get_dive_by_id, and it also removes the
Q_ASSERTS and if(!dive) return that the callers of this function were
calling. If it has a Q_ASSERT this means that the dive must exist,
so checking for nullness was bogus too. I've changed the assert (done
in a silly C-Way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A bit longer, but we had a function named get_dive_by_diveid
and another one named getDiveByDiveid that did completely
different things, it was too easy to hit the wrong one..
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'll probably add prefixes to functions to make it easier to find method
via autocomplete from the grep or interface helpers, do you wanna know all
the functions that works with a dive? ask for the completion for dive_,
do you wanna know all the functions that works with a divelist? ask for
the completions on divelist_ or run grep -rIs divelist_ on the header
files.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those were from the ancient Gtk times where we hardcoded the white stars
and black stars as font glyphs instead of drawing them. get rid of it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The units are used everywhere in the application, we don't really
need to include "dive.h" to be able to use unit conversion, so I
changed them to a new file. There is still a lot of non-dive stuff
in dive.h / c, I'll try to move more later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on Linus' idea on the mailing list.
Treat NULL strings and empty strings as identical.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an item to File menu to export all dives in CSV format.
Naturally this includes also the code to perform the export.
Fixes#434
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a preferences setting, it should belong to the preferences
structure.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This marks a lot of todo's where I think there's core stuff being mangled
on the interface - we should remove this from the interface to make
testing and maintenability easier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
