Make the infobox invisible in planner (it really doesn't provide a lot of
useful info while planning a dive and more likely gets in the way).
Make the calculated ceiling always visible in planner and add mode.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Exporting the raw dive list into JSON format for later viewing with html
and js files. Also some worldmap code organizations.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to do this when calling plan() from createTemporaryPlan() -
we only want to record the dive at the end of createPlan().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of even trying to keep one around (which then could cause all
kinds of trouble) we now always delete it at the end of the planner.
So simply always recreate one when starting the planner (and make sure
that the staging dive has always been cleared out, first).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we first ADD a dive and then PLAN a dive, stagingDive first was an
alias to the current_dive (for ADD) - we need to make sure that when PLAN
is started, a new dive is allocated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the stagingDive is just an alias for the current_dive (as it is in dive
ADD mode), there's no need to copy the cylinders; they are already there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch correctly sets the state of the planner to "NOTHING"
after trying to edit a manually added dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch removes some inconsistencies that were happening on the add
dive / cancel actions. a bit of legacy code from the old system was still
in, which made things quite... EXPLOSIVE.
This fixes restoring the selection only if we have a selection and not
deleting the temporary dive twice.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moved the connections between DivePlannerPointsModel and
MainWindow from inside the Planner class to the MainWindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there was no current dive we didn't set up any cylinder at all which
was a bit awkward as we use AIR but have no cylinder corresponding to it,
which breaks assumptions elsewhere.
Instead we use either the default cylinder or make one up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Duh. We had to reload the list (and make sure the internal data structures
are recreated as well) before restoring the selection.
I also switched to simply accessing the widget directly, instead of via
the dive_list() call.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is still something seriously wrong here.
For now let's just not restore the selection and at least this prevents us
from crashing. But I still don't understand why it crashes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Looping over the individual dives will be very slow if there are many of
them, as the profile will try to render each of them in succession.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for some reason the next selected dive is NULL after cancelling the
plan. I'm investigating.
This patch fixes the show of the empty profile and it also untangles
some parts of the code, keeping the mainwindow where it should belong
: the mainwindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This only partially works. If I start from an empty dive list, plan a
dive, then abort, there are still leftovers in the profile widget.
Hitting Ctrl-W clears that out. But it just runs the same cleanUpEmpty()
again...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On an empty dive list we would remember the new dive (which gets
auto-selected since it's the only dive) and then crash when we try to
restore that selection after cancel (in which case that new dive is gone).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to reset the editMode right away, otherwise all the changes to the
input field (when resetting the data after the user cancels) will cause
Subsurface to crash as current_dive will temporarily be NULL.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old way manually implemented a parser, where it could simply call a
regexp (or, in my case, a QChar) that will split the QString into many, to
find the beginning and end of the strings on the tags.
This patch also fixes a Qt5 off-by-one bug on the tag Visualization.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm sure canceling the plan when saving an added dive made sense at some
point for some reason. Right now it makes things crash, so let's not do
it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were making things way too hard (and were doing things that don't need
doing, like clearing the DivePlanPointModel).
Currently we still crash after manually adding a dive or when canceling
a plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still crashes when canceling the plan.
And doesn't display the correct dive profile until you switch to a
different dive and back.
And Keyboard focus is wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Tomaz suggested, I don't need to pass the information whether we are on
the planner into the function - it's part of the DivePlannerPointsModel
and therefore already knows.
Also, we want to make sure we actually use the gas that's in the first
cylidner of the staging dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still crashes when you abort the plan.
And when you accept the plan, the profile stays stuck in PLAN mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code had no chance of every working - on so many levels.
First unselect all dives, then extract data from a selected dive?
Set up the cylinder data (which didn't work), and then clear the data
again?
What the heck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch paints the dive red if the user is breaking ceiling
on the planner - it's quite fast, it analizes the depth over the
max(tissue_1 .. tissue_16) and changes the color of the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the movements from the lines when added / removed
SO much better.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a flag to only recalculate the axis when needed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On the cleanup dirk forgot to set the plan tipe to PLAN instead of ADD
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow to both create the full default dive or ownly the descent and bottom
part (so the planner can deal with the ascent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is working in the wrong way, mostly because I'm setting the
plannermodel to ADD state ( and the planner graphic to the
correct PLAN state ), but I don't know why - when on PLAN state
on the model, things just don't work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function should likely to move to C in the future, I'm only
adding this here because I'm changing this file so much ( already
4 rewrites of the function )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The disableDcShortcuts is called inside of the ProfileGraphics
( I actually think that this method should be moved to there )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This correctly enables the planner on the new profile,
but it doesn't triggers the correct paint on the canvas.
[Dirk Hohndel: remove other remnants of the disabled planner as well]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas consumption calculation fixed. Pressure difference still needs cylinder size to be set.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt5 got confused about this slot. This does the same as previously but
gets Qt5 happy.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When removing o2 from a gas, eg setting it to "", air, this code would
raise a nice fpe. Fix that by using gas_mod instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a testament to how much I mess around with things that I hadn't
noticed that saving the column width doesn't actually work. Or actually,
saving them worked, loading them back failed as it was done too early and
the setColumnWidth() calls had no effect - and so the next time we quit
subsurface, the default width of 100 was written over all the saved
values.
This seems like an incredible hack but it has the advantage of actually
working. I look forward to someone with better insides into the inner
workings of Qt to properly fix this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We set the column width in the dive list widget when we create that
widget, based on what is in the settings. And we save the current column
width back to the settings when we destroy that widget (so if Subsurface
is shut down correctly and Qt actually gets to run the destructor but not
when someone kills the program).
That means that if we recreate the dive list at any point while Subsurface
is running (and we do that a lot when you manipulate your dive list in any
way shape or form), any changes to the column widths are lost.
DiveListView::reload() explicitly calls setupUi() which reads the column
widths back from the settings - but changes made to the columns aren't
saved to the settings until we destroy the widget...
I see no reason why reload() should call setupUi(), so I'm removing that
call. Let's hope this doesn't break anything else.
Fixes#518
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use mod calculations on multiple places, so make a separate helper
from it with proper types.
The "clumsiness" of defining a local variable to pass into the function
and out from it comes from the discrepancies in how c and c++ handles
initializations of variables in a struct.
Thanks goes to Tiago and Linus for pointing me in the right direction.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only a tiny bit of poke around the contextMenuEvent - the events
of the planner are dealt by the QGraphicsItem, and this makes the
logic pretty easy to follow. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk's code in commit a3d300ca91 ("Correctly implement multi dive
selection") had a major flaw - it kept redrawing the selected dives
one after another. Not what we need. So this fixes this up so that it
doesn't take more than a sec to select all the dives that are on the same
part of the click on the globe. I've achieved this by creating a boolean '
dontEmitDiveChanged and sending the signal only if this flag is false.
The reason that we can't simply remove the emit from the selectionChanged
is because the selectionChanged is what we have when we click on the
diveList, if we removed this from there, nothing will happen upon
selection.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code had several issues. It broke the synchronization between
dive->select and Qt selected status and worse, it would partially unselect
previously selected dives when called.
This patch, however, causes the selection via the map to be glacially slow
because it forces a redraw of every single selected profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Give the export dialog a better name than just dialog.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also fixes a couple of issues with the existing code:
- removes a memory leak
- treats null and "" the same
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
According to the documentation clearSelection() should emit
selectionChanged() - but I can verify in the debugger that sometimes this
doesn't appear to happen - consequently our notion of what's selected gets
confused.
To work around this, after calling clearSelection() we simply manuall
deselect all dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When multiple dives are selected, we need to be smarter about when to show
"add to trip immediately above" or "... below". This code is quite
readable, I think, and does the trick.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: combined two commits into one and cleaned up some
whitespace issues]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First step towards getting the "add to trip" logic in the divelist context
menu to be consistent and correct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The context menu is getting way too big and confusing. This is now much
more cleanly done from the File->Export dialog.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code removed was already ported to the New Profile.
We managed to clean quite a bit. huhhy
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new profile code handles the resizing of the profile area in order to
accomodate the depth and time of the dive much more intuitively - the old
manual buttons to do so are no longer needed.
This also removes a few other unused methods.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes mouse dragging work as it should, a tiny
bit different than the old version, but I think it's a better
way. What's missing: Keyboard actions.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is not ported to the new profile, but from what I
can understand from it, it doesn't need to be. The purpose
of this code was to setup the correct colors and strings
for the current mouse position, we already do this on the
Profile in a different way, on the Notification Area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QGraphicsView system moves every selected item when the user
clicks and drags one. This patch makes a cache of all selected
items and removes the selection on them. When the user stops dragging
the Notification, the selection is restored.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit makes the planner actually work. There ar still
a few edges, but oh, joy - the new Profile gave a very unexpected
and nice addition to it - Grab the last handler of the initial
dive, and move it to the right, or get any handler, and move it
to the bottom to see what I mean.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a itemChange method, that emits a 'changed'
signal when the handler is moved. I'll use that signal on
the profile to call the correct method.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI design looked too tight in my screen.
The explanation texts were a bit inconsistent (and in one case simply
wrong).
The explanation for the initial selection wasn't shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When choosing a format from the export dialog a two line description of
the format appears. This is helpful and prevents confusion.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All code that was removed already is working on the New Profile,
The code that's behind #if 0 means that it still needs to be ported and
because of some removal, it was not possible to keep it compiling (mostly
the removal of the Ruler class, that is the Axis, on the new profile).
The rest of the code that's untouched - most probably will keep that way.
The DivePlannerPointsModel is correct and well done, no need to change
that, only the Graphics part.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But it doesn't move the handlers yet, and when you confirm it you also
must click on the dive to select it or the profile will show garbage.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A signal can connect to another signal, so I removed a slot that had the
sole purpose to call another signal and replaced that with a direct call.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds the disconnections of temporaries. A temporary connection
is a connection that should be active only on a certain state, and we need
to clean that for the new state that will enter after.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those two functions are important and necessary for the Planner, they
create and remove the little balls that act as handlers so the profile
can be edited with the mouse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a signal to MainTab, that should be removed from there
when we finish the rework on the edit part, to go to the edit classes,
but in the meantime, let's keep it there.
The signal is connected to the ProfileWidget in a way that the end of the
edit will also trigger the profile to go back to ProfileState (show the
dive, if there's any) or empty Profile (if there's none).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is highly broken in many ways - but it's the right first step.
I ported two of the most important methods from the old profile and now if
you are in add dive mode, double clicking on the new profile will
correctly add a handler on the planned dive. To see and move the handler
around, however, you need to activate the old planner.
Next step: add the handlers on the new profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a temporary measure to help me port the planner to
the new profile. it will be removed when I finish the port,
but it makes the software still usable, so there's no worris.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code checked if dest and source existed before trying to call an
method on them, but dest and source are created on the constructor,
and thus, the if is dummy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with any other graphics object, the settings for the ruler
should be managed by the ruler, clearing up the Profile logic
and making the code easier to read.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used both preferencesChanged and settingsChanged in different
methods and classes to mean the same thing, this adds consistency.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The list of preferences that should trigger a full repaint are at the top
of this method, *if* this introduces a bug it is because some of the
preferences are not being correctly triaged yet and that needs to be
fixed. Regardless of that, now the profile will only enable / disable
the *ruler* instead of replotting everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QSettings is a bit bloated on its use, so we are trying to narrow
down the amount of calls to it. We have a preferences struct, use that
instead.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By moving the Hide/Show of the ruler to an internal method, we gain a bit
of codecleanuperism by removing a lot of unnecessary calls to their dest
and source drag-handlers.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic of removing the event was in the UI, and this makes
the code harder to test because we need to take into account
also the events that the interface is receiving, instead of
only relying on the algorithm to test.
so, now it lives in dive.h/.c and a unittest is easyer to make.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the ability to close the exporting window, also Quit Subsurface with
this window in front, for consistency.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the ability to export selected dives only in the worldmap
exporter. After Miika added the export dialog in commit 7dc642860d
("Implementing export dialog") and exporting only selected dives became a
choice while exporting.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As our menus are getting many export entries, it is better to create a
single export dialog where user is able to select the export type and
whether to export selected dives or all of them. This should also be
more intuitive than the current way when export from file menu export
all dives and right click menu on divelist exports only selected dives.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
