In imagedownloader.cpp the only thing we need from the picture struct
is the filename. Therefore, use QStrings instead of the picture struct.
This simplifies memory management.
Remove the clone_picture() function, which is not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
SHashedImage was a subclass of QImage, which fetched the image according
to the filename hashes. Turn this into a function, as this is much more
idiomatic and flexible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On startup, convert an old-style thumbnailHash to individual
thumbnail files. Show a modal progress bar while doing so.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code loaded all thumbnails into memory at once. This does
not scale to logs with thousands of pictures. Therefore, save
the pictures to individual files and only load the currently
needed pictures.
Currently, this will make changing switching between dives slower,
because the thumbnails are loaded from disk. In the future, it
is planned to do this in a background thread without blocking
the user interface.
A notable difference to the old code: Thumbnails are now indexed
by the image-hash (i.e. the content of the raw image) and not
by the filename of the image. Thus, different paths to the same
image should only be saved once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Detection isn't required, but it makes things easier. For the Mares dive
computers we only see the Bluelink, so we can't tell which dive computer is
connected to it. We guess "Quad", but the user can pick a different one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When generating fake profiles for manually entered dives, fake_dc() and
plan() used different final ascent rates of 5 m/min and 4.5 m/min,
respectively. This led to dives that were 6 seconds longer than entered
by the user and to confusion. See #554.
Therefore, use the same ascent rate taken from the preferences field
flag.ascratelast6m in both cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The connection for the display of CCR-setpoint o2SetpointGasItem
was erroneous, being connected to partialpressuregasSettings. It
is now correctly connected to technicalDetailsSettings.
2) The colour of the setpoint graph is changed from PO2_ALERT (red) to
an orange colour in order to show setpoint in red only when it
exceeds 1.6. This emphasises the visibility of red parts of the
gas pressure graphs whenever gas limits are exceeed.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
By not filling out this value, entering of manual dives was broken
for dive lengths starting with a digit 5 or higher.
Fixes#1211
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function looks for the last gas change before a
given time. We should initialize it with a gaschange
event as we might later use this event to read a
gasmix from it.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
The previous code would not add the non-LE address for dual stack
devices. Unfortunately, even with this fix we still don't get the
correct result for the dual stack Shearwater Petrel 2 that I have
for testing as Android incorrectly reports it as a BLE-only device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only filter against the hard coded list if no other supported transports
are available for a dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For example, even on platforms that support libusb, libdivecomputer
might be compiled without such support.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user specified bluetooth, we really should pick bluetooth, not
probe and possibly fall back to something else.
We should also honor the users choice of BLE vs classic BT.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In firmware version 2.97 the setting 0x38, SETPOINT FALLBACK, has bin
obsoleted and we get a error when trying to write to it.
This removes this setting.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
On Android we still need to do more filtering as only some of the USB
divecomputers are supported. But on iOS this takes care of it without
the hard coded list.
Additionally, if built without BT or BLE support, the corresponding dive
computers are no longer shown (e.g. Perdix AI on Windows).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This opportunistically uses a cache of 'fingerprints' for already
downloaded dives.
As we download data from a dive computer, we save the fingerprint and
dive ID of the most recent dive in a per-divecopmputer fingerprint cache
file.
The next time we download from that dive computer, we will load the
cache file for that dive computer if it exists, verify that we still
have the dive that is referenced in that cachefile, and if so use the
fingerprint to let libdivecomputer potentially stop downloading dives
early.
This doesn't much matter for most dive computers, but some (like the
Scubapro G2) are not able to download one dive at a time, and need the
fingerprint to avoid doing a full dump. That is particularly noticeable
over bluetooth, where a full dump can be very slow.
NOTE! The fingerprint cache is a separate entity from the dive log
itself. Unlike the dive log, it doesn't synchronize over the cloud, so
if you download using different clients (say, your phone and your
laptop), the fingerprint cache entries are per device.
So you may still end up downloading dives you already have, because the
fingerprint code basically only works to avoid duplicate downloads on
the same installation.
Also, note that we only have a cache of one single entry per dive
computer and downloader, so if you download dives and then don't save
the end result, the fingerprint will now point to a dive that you don't
actually have in your dive list. As a result, next time you download,
the fingerprint won't match any existing dive, and we'll resort to the
old non-optimized behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This creates a new libdivecomputer_device_open() helper, and makes
downloading and configuration use it to open the dive computer device
using the proper protocol.
The IRDA case was tested by Sébastien Dugué - I had initially left it
undone believing that "nobody uses IRDA".
Reported-and-tested-by: Sébastien Dugué <sebastien.dugue.subsurface@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This converts our old custom IO model to the new model that
libdivecomputer introduced. This is partly based on Jef's rough patch
to make things build, with further work by me.
The FTDI code is temporarily disabled here, because it will need to be
integrated with the new way of opening devices.
The ble_serial code goes away entirely, since now libdivecomputer knows
about BLE transport natively, and doesn't need to have any serial
wrapper around it.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove a semicolon after Q_OBJECT and a few others after the closing
braces of while loops.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This should have been caught by our build check, but it turns out that
that one isn't correctly reflected in its Travis status.
Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Up until now we just reused the macos.c file for convenience, hard coding a
specific file path that may or may not work on iOS. Instead get the preferred
path from Qt and for this we need to be able to call into Qt, so this needs to
be a C++ file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Technically, these aren't BLE, these are just the three devices that
are supported by the Mares Bluelink Pro Bluetooth download dongle.
While we are at it, admit that this code is no longer automatically
created but instead maintained by hand.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Identify segements that fullfill the folllowing criteria for
the leading compartment:
He is off-gasing while N2 is on-gasing
Overall there is on-gasing
Add a line to the info box for those segments
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The planner notes were constructed using a sequence of
len += snprintf(buf, buflen - len, ...);
calls. This will fail once len > buflen, because the second parameter
of snprintf is unsigned. Note that snprintf returns the number of
bytes that would have been written if it weren't truncated.
Fix this by using membuffer with put_format()/put_string() and
asprintf_loc().
Fixes#1155.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_dive_date_c_string() and get_current_date() return copied strings.
Make this explicit by returning non-const pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move duplicate code, which reads '*' arguments from va_list into
parse_fmt_int() function. To pass pointers-to-va_list, the va_list
has to be copied first.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
qthelper.cpp is already quite voluminous. Move the recently
introduced localized versions of (v)snprintf() and put_format()
into their own translation unit.
Moreover, adopt C-style semantics for asprintf_loc(). This function
will be used to remove fixed-size buffers in core/plannernotes.c.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Previous taglist_get_tagstring signature/implementation did not allow
handling of cases where inputted buffer could not contain all tags.
New implementation allocates buffer based on pre-computed size allowing to
insert all tags in the returned string.
Added get_taglist_string in qthelper to handle conversion to QString
Added TestTagList with tests for taglist_get_tagstring
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
