Connect the UI to the underlying dive structure. Enable proper initialisation
and management of star widgets while Information tab is active. Enable undo for
the addtional star widgets.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement the UI features related to the additonal star widgets.
Create the additonal star widgets and connect them to the preferences settings.
By default only the current and visibility widgets are shown. In this case the
current widget is on the left hand side of the tab. If the additional widgets
are enabled the horizontal order of the widegts are changed to reflect
attributes roughly from the start of the dive on the left to those towards the
end of the dive on the right.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove modification of style sheet for "Dive mode" box in info tab.
This fixes a broken UI layout under Windows.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the future we might want to use undo-commands for mobile as
well (even if not implementing undo).
Therefore, move the undo-command source from desktop-widgets
to their own commands top-level folder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the information tab, presenting atmospheric pressure is a bit
unintuitive because the diver cannot easily relate that to altitude.
For the Atm. Pressure widget in the Information tab this code does:
If the atmospheric pressure for a dive exists and the user selects
the 'm' or 'ft' option from the combobox, then the estimated altitude
is shown in the text box.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The undo stack is preserved.
This is in preparation of removing temperatures from the Notes tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
1) Reorganise the existing widgets in the Information tab
2) Move divemode widget and visibility widget from Notes tab to
Information tab
3) Translate water density to a word indicating water type
4) Reorganise the Notes tab to compensate for the moving the
divemode and visibility widgets to the Information tab
5) Remove the problems in showing a QGroupBox in Qt Windows. I do
this by removing the CSS specifying border characteristics
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tab was crashing if there were no cylinders because
1) per_cylinder_mean_depth() would access non-existing cylinders.
2) TabDiveInformation::updateProfile() would access a non-existing
mean.
Fix both of these crash conditions by checking whether the dive
actually has cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When keeping track of cylinder related data, the code was using
static arrays of MAX_CYLINDERS length. If we want to use dynamically
sized cylinder arrays, these have to be dynamically allocated.
In C++ code, this is trivial: simply replace the C-style arrays
by std::vector<>. Don't use QVector, as no reference counting or
COW semantics are needed here. These are purely local and unshared
arrays.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_gas_used() returns the volume of used gases. Currently,
an array with MAX_CYLINDERS is passed in. If we want to make the
number of cylinders dynamic, the function must use an arbitrarilly
sized array.
Therefore, return a dynamically allocated array and free it
in the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The divesEdited signal sends the changed field as a parameter.
Since some undo-commands change multiple fields, this led to
numerous signals for a single command. This in turn would lead
to multiple profile-reloads and statistic recalculations.
Therefore, turn the enum into a bitfield. For simplicity,
provide a constructor that takes classical flags and turns
them into the bitfield. This is necessary because C-style
named initialization is only supported on C++20 onward!
Is this somewhat overengineered? Yes, maybe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo system sets updates individual dive fields on
redo respectively undo. Make salinity such a field, since
it is changed on replanning a dive.
To do this, break out the "update salinity" functionality
into its own function, add an entry to the DiveField enum
and add the corresponding switch-case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the default view is batched by trips, signals were sent trip-wise.
This seemed like a good idea at first, but when more and more parts used
these signals, it became a burden. Therefore push the batching to the
part of the code where it is needed: the trip view.
The divesAdded and divesDeleted are not yet converted, because these
are combined with trip addition/deletion. This should also be detangled,
but not now.
Since the dive-lists were sorted in the processByTrip function, the
dive-list model now does its own sorting. This will have to be
audited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Information tab shows the atmospheric pressure. Make this value editable
and also ensure that changes to it are undo-able.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The default QString constructor generates an empty string. No point
in assigning the empty string to such a thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the dive information tab was not updated when the user
edited fields. The fields were only updated when switching between
dives.
Therefore, hook into the "divesChanged" signal and update the fields
accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The information tab used displayed_dive to fill out its field.
For consistency with the main tab and in a bigger effort to remove
displayed_dive, use current_dive instead.
Only clear the fields if no current_dive is set. The code used to
clear the fields and overwrite them later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old surface interval calculation had fundamental issues:
1) process_all_dives(), which calculates the statistics over *all*
dives was used to get the pointer to the previous dive.
2) If two dives in the table had the same time, one of those would
have been considered the "previous" dive.
3) If the dive, for which the surface interval is calculated is
not yet in the table, no previous dive would be determined.
Fix all this by creating a get_surface_interval() function and
removing the "get previous dive" functionality of process_all_dives().
Remove the process_all_dives() call from TabDiveInformation::updateData().
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Calculating dive.when + dive.duration doesn't always give the correct
endtime of a dive especially when a dive has surface interval(s) in
the middle.
Using the helper function dive_endtime() fixes this issue.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Update the function to create the dive duration string in a way that
it can be used also in info and stats tab and added some more flexibility.
Changed layout for <1h freedives to "0:05:35" (w/o units) or "5:35min"
(with units and :) or "5min 35sec" (with units with space).
Add a new function to create the surface interval string.
Completely remove old function get_time_string() and get_time_string_s().
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Maintab is one of our most complex classes, and it's
something I'm not actually proud of. But it currently
works and the idea of splitting it was in my head for
quite a while.
This is the third or fourth tentative of splitting it,
and this time I let the most complex part of it untouched,
the Notes and Equipment tab are way too complex to untangle
right now on my limited time.
A new class 'TabBase' should be used for any new tab that
we may create, and added on the MainTab (see the new lines
on the MainTab constructor).
Also, Extra Info, Information, Photos and Statistics where
ported to this new way helping reduce the number of
lines and functions on the MainTab quite a bit.
Overall this is a step in the right direction for the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
