It makes reasoning about code so much easier when one knows that
functions cannot be accessed from the outside. Therefore, make
a number of DiveListView slots private. Moreover, unslotize
functions that never were used in connect calls.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView widget has to differentiate between programmatical
und user-initiated selection changes. It did so by using the
DiveListNotifier::inCommand() flag.
However,
1) There is only one point of entry for such selection changes,
viz. the MultiFilterSortModel::selectionChanged() signal
2) This signal is not only emitted in command-context.
Another source is for example dive-map selection changes.
Therefore, move the programmatical-selection-change status down
to the widget and set/reset it in the diveSelectionChanged() slot.
This makes "select all visible dive sites" somewhat faster. Sadly,
not as much as expected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Outside callers had no business calling these functions.
Especially some functions that were simply there to override
default DiveListView behavior. Mark these as overridden.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used by the map to select dives. However, the map now calls
the core function directly, so this can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The map widget called the dive list to select dives. This is
inconsistent and complex. The dive list has to call down to
the core anyway. Therefore, change the code to call the common
core function.
This means that we have to transform integer ids into dive-pointers.
That is a bit sad, because the dives were just transformed into
indices. Let's address that in a future commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is no longer created using GitHub actions (but all the necessary
information is still included in this repo). We need to be able to
shrink this container so our GitHub Action runs don't run out of disk
space.
Adjust the path where the resulting binaries are found with this build.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We no longer use libusb to access USB devices on Android, therefore
there's no point including libusb in our build. Also, we have never even
attempted to run the tests on Android, so let's not even pretend to
support building them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we install our support libraries into the NDK we later run into
include path order issues that result in strange errors around the
inclusion of math.h (because we find the C version of that include
file that ships with the NDK before we find the libstdc++ version
of math.h (because the include path for our support libraries is
listed before the libstdc++ include search path). By having a distinct
install-root for our libraries we can avoid this problem.
Remove the previous hack that tried to work around the symptoms of
this issue.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The official installer now requires the user to log in which we can't
really do in a scripted manner. Let's see how long this way of
installing things will be available.
While doing this remove an ancient hack of some Qt settings that we no
longer need.
This also tries to prune some things that we don't need in the Docker
image to reduce image size.
The mapbox plugin is removed as it would add a dependency to QtSql which
we otherwise don't need. And since the plugin isn't used, no point in
installing it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 5.13.2 fixes a few bugs.
We are NOT switching to Qt 5.14 as that breaks a ton of things with
Android support. At this point even with qmake it near impossible to get
working Android binaries, no one appears to have a solution for cmake.
With qt-android-cmake current master fixes the problem that held us back
at the earlier commit, so let's go back to using master.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that on those two platforms you now need a paid API key in order
to have this feature work. Certainly not something I'm going to do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The qml-widget seems to catch selectedDivesChanged signals of the
MapWidgetHelper and reemit them. However, there seems to be nobody
listening to this signal?
Let's remove this for now to make debugging of the signals easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was erroneous, as it should only be called at the end of
a selection change, not after every single dive. It made selection
of multiple dives extremely slow.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Debugged-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveListView::selectDive() is an overloaded function. The second
version was only called by the first version, so we can fold one
into the other.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-machinery makes sure that a current_dive always exists
after an undo command. This part of the code should never be
called.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This appears to be an artifact. Collapsing does not unselect
the current dive, so reselecting it appears pointless.
Also it is unclear why the selection should be restricted to
a single dive after collapsing.
Probably that was originally meant to expand only the trip
with the current dive in it?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, it is made clear that these member functions can only be
accessed from DiveListView itself. This should make debugging
easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move this to the core so that desktop and mobile don't have
to call this explicitly. Matter of fact, mobile didn't call
this. It is unclear, whether that was even used on mobile,
though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It makes no sense to keep the device nodes if all the other data
is cleared. Let's do this automatically and not explicitly.
This ensures that the function is also called on mobile.
Currently it was only called on desktop.
Weirdly, the parser-tests were expecting that the device nodes
were not reset by clear_dive_file_data() and therefore divecomputers
were accumulating in the test results. Thus, the additional
computers had to be removed from the expected test results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter sets the maximum date to now. This is so confusing when
you manually add a dive and it isn't shown, because it is slightly
in the future. Add seven days, that should help.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This only checks the first divecomputer as the semantics for
multiple dive computers with different dive modes are not
clear. Should we check them all?
The implementation is a bit hackish: the indexes [0...n] of the
combobox are mapped onto [-1...n-1], where -1 means don't filter
and n-1 is the last valid dive mode.
Implements #2329
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It appears that some misguided compiler / library combinations crash
on &vector[0] for empty vectors. Even though very unfriendly, they are
technically correct, so let's remove these constructs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
TabDiveInformation::updateProfile() does some statistics via the
per_cylinder_mean_depth function. It passes down arrays with one
entry per cylinder, which are allocated by means std::vector.
To pass the array, the expression "&vector[0]" is used. It seems
like some compilers through an assertion violation if vector
has no elements. They are technically correct in that this is
undefined, but still this appears like very unfriendly behavior.
After all, std::vector should behave just like a dynamic C-array
that is automatically freed, when going out of scope.
Replace the "&vector[0]" by "vector.data()" and don't do the
call if there aren't any cylinders for good measure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Arguably, returning 0 for a dive with no cylinders is wrong, since the
0 is a valid cylinder id, however that cylinder doesn't exist. Instead,
return -1. All callers of explicit_first_cylinder() return early anyway
for dives with no cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we removed MAX_CYLINDERS, we have the possibility of dives
with no cylinders. In such a case, setup_gas_sensor_pressure()
would do invalid read- and write-accesses. Therefore, return
early in such a case.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the more commonly used filter to the left and the less
commonly used "purge unused sites" button to the right. Add
a spacer so that the filter-textbox doesn't extend over the
whole free space.
With apologies to sinistroverse users (is there an option to
make the layout direction depend on the locale?).
Suggested-by: Hartley Horwitz <hhrwtz@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I'm not sure if Google used to show the POI marker at the center location in
the past or if this is actually a new feature. Either way this appears to do
the right thing in my testing.
Note that we need a 'plus' to connect the point of interest cooridnates,
but a 'comma' to connect the map center coordinates.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code block was also for the OBS builds and is no longer needed now that we
have to separate make-package scripts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Under some circustances values stored in this arrays may be NULL or even
previously freed. Check them to avoid further crashes.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
The d->cylinders created will be overriden by libdivecomputer parsing,
resulting in 0, 1 , may be 2 cylinders depending on DC data. This is not
what we want when importing a divelog, because we will miss all hand
entered tanks.
BTW, using get_cylinder() on tank number bigger than created, results in
a NULL pointer and a crash.
As we can't foresee how many tanks (or even it's positional numbers in
log) a diver has used, the full 10 tanks supported by SmarTrak can be
easily created and parsed using get_or_create_cylinder(), and unused
cleaned later.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
This brings the user manual in line with the recent changes to the
layout of the export panel.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
It seemed very odd to have those steps mixed in with the Ubuntu/Debian
instructions. Yes, there is a bunch of overlap, but this seems much cleaner.
This also updates the spec files to something that works for the current
sources.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This cleans up a lot of the ancient mess in that file.
It's still confusingly usable to push sources to OBS as well (but that's now
hidden behind an option) and it is still somewhat custom-made for me, but it
should be much easier to reuse for others now.
In addition to Subsurface and libdivecomputer we are inclooding the googlemaps
sources and libgit2 1.0.0 sources. Bionic is the only remaining distro that we
support that doesn't have a new enough version of libgit2 (0.26 is the minimum
we expect), but since we are linking statically against it, maybe it's best to
simply force all of these builds to include libgit2 1.0.0.
Handling of the debian/* files in the script has been changed quite a bit to
make it easier for others to create a working setup. It now updates all of the
files with the exception of the changelog files from the sources we are
building from. I am hoping that this will be a not-so-subtle incentive for me
to keep the bundled versions up to date.
Since we no longer do beta releases, I removed that part from the file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
