prefs.showpin is the same as
PrefCloudStorage.cloud_verification_status === CloudStatus.CS_NEED_TO_VERIFY
but is actually implemented as a separate variable.
Removing showPin in order to limit use of QMLPrefs, which is the overall goal.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove no longer used function setCredentialStatus() from qmlprefs.
This is done to secure there are no missing setCredentialStatus calls
in the code.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
call setOldStatus() and set_filename().
saveCredentials() will adjust email and password.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This setCredentialStatus() will never do anything, because qPrefCloudStorage
is identical to prefs.cloud_verification_status, and can thus be
safely removed.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Revert to the divelist by setting oldStatus() directly to
set_cloud_verification_status()
This is done to further limit the use of setCredentialStatus() and
prepare to remove qmlPrefs.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update revertToNoCloudIfNeeded() to not use setCredentialStatus() by adding an
extra call to setOldStatus()
setOldStatus() is called in setCredentialStatus together with
set_cloud_verification_status() therefore these 2 calls need to added when
removing setCredentialStatus().
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qmlprefs::setCredentialStatus() basically only does something when called with
CS_NOCLOUD.
A number of setCredentialStatus() calls happen where status cannot be
CS_NOCLOUD, and therefore setCredentialStatus() can be safely replaced with
set_cloud_verification_status()
This limits the use of qmlprefs::setCredentialStatus(), but there are still a
couple of more complicated calls.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace all credentialStatus() with cloud_verification_status()
Where both prefs.credentialStatus and
PrefCloudStorage.cloud_verification_status are being set, remove
prefs.credentialStatus.
These replacements are valid since credentialStatus() is a simple
envelope over cloud_verification_status().
Also remove qmlPrefs::credentialStatus() from qmlPrefs (mostly to ensure no
replacements was forgotten).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove m_credentialStatus in qmlpref, but let the setter/getter
stay, using qPrefCloudStorage::cloud_verification_status()
instead.
This change ensures that qmlPrefs:credentialStatus() returns the
same as qPrefCloudStorage::cloud_verification_status(), and the
setter/getter of credentialStatus can later be removed safely.
This is a "checkpoint" to ensure everything works without a temporary
credentialStatus. No code part depend on the difference between
qmlPrefs::credentialStatus() and
qPrefCloudStorage::cloud_verification_status(), but the code reference
both.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove use of prefs. (apart from instanciating the object) in
main.qml
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the divelist is only visible if online/offline (CS_VERIFIED/CS_NOCLOUD),
there is no need to check that to enable "Add dive manually".
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Manual sync was enabled both for CS_VERIFIED (online) and CS_NOCLOUD (offline)
and then in the trigger CS_NOCLOUD lead to a login screen, potentially
confusing the user.
Only enable manual sync with verified cloud credentials.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs. is only important during the signin process, so use the standard
PrefCloudStorage variable
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin does only have the values "" and NULL, so replace cloudPin()
with "" in csa->backend() call
remove setting of cloudPin to ""
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin is only set to "" and NULL, therefore and "if" checking if
cloudPin is not empty will never have affect.
Remove else part.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move verifyCredentials() from public slots to private, eliminating
the need to MOC and making the C++/QML interface on function less
complicated.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add pin parameter to saveCredentials() thereby having all info about
credentials in one function call.
Add "" as pin in saveCredentials() - main.qml, when verifying
credentials.
replace verifyCredentials() with saveCredentials() in the register
button on the pin page.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clearCredentials() was only called from one place (in the same file), copy
functionality and remove function.
It was declared as a public slot, so this saves a little bit of overhead too.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cancelCredentialsPinSetup() is no longer used, so remove it.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Copy functionality from cancelCredentialsPinSetup() into Cancel in
CloudCredentials.qml, this is part of the general qmlprefs cleanup.
Remove rootItem.returnTopPage() since the user stays on this page
(sees credentials again).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now just copy the functionality into Settings.qml, this is part
of the qmlprefs cleanup.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit contains the researched values used for
diveplanning, which form the basis for the test cases.
Signed-off-by: Jan Iversen <jan@casacondor.com>
These were again copied from the material design icon set and will be used to
differentiate the various help topics.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The global drawer already has a name that can be referenced. This was adding
confusion as now both names were used in the menu structure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user is most likely to find out, that he does not remember
the password, when asked for it.
Add "forgot password" button in the signin dialog
(both credentials and pin dialog).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Test show that the ratings calculations were off by +/- 1, due
to rounding errors. Found due to test cases in tests (other commits)
The calculations are copied 1-1 from diveplanner.cpp, but are
used slightly different in plannerShared.cpp
Correct calculations, by securing the calculation is done
with float precision and the rounded with lrint().
Signed-off-by: Jan Iversen <jan@casacondor.com>
rightPadding seems defined in Kirigami and the default value
causes a binding loop.
set rightPadding directly.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is a cosmetic update to remove some warning messages
while building a fresh subsurface. These warnings were due to
duplicate label names in the .UI files.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Use updated CMakeLists to activate TestPlannerShared
but only for mobile builds !!
This is due to the fact that commands are currently
not available for mobile builds.
Using the mobile library version of qt-mobile secured
diveplannermodel.cpp is compiled without referencces to
commands.
Signed-off-by: Jan Iversen <jan@casacondor.com>
In order to make tests for plannerShared, some qt-models must
be linked, and due to the fact that commands are currently not
available for mobile (which also makes the tests) and #ifdef must
be added.
The test version of diveplannermodel will be specially compiled in
(SUBSURFACE_TESTING set) in the tests directory.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Use string literals to communicate with QML.
Instead of passing arounds enum/int value, it seems easier to pass string literals to QML and have that code respond to those
Signed-off-by: Jan Iversen <jani@apache.org>
Do not set prefs.locale_lang_locale directly, but do it
indirectly through qPrefLanguage::set_lang_locale(),
to ensure the file plist is consistent with prefs.
the difference (prefs. contra plist) cause surprises
when restarting mobile (and playing with language).
Signed-off-by: Jan Iversen <jani@apache.org>
