Found by Dr. Memory, run by Lubomir:
Error #48: UNINITIALIZED READ: reading register al
# 0 StarWidget::mouseReleaseEvent() [qt-ui/starwidget.cpp:29]
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Hide the sizeing sliders from PrintOptions. we don't really
support any of those in PrintLayout and these are not that
useful and easy to implement, until some sort
of layouting/templating system is in place.
- Move the 'Print' button on top as a workaround, since if
it's bellow the print options it stays bellow an empty area
where the now hidden sizing sliders are.
- Resize the dialog to a smaller size
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Make it consistent with other application dialogs.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The translatable string in about dialog is truncated at the
VERSION_STRING. Thus it has to be given as argument to the tr function.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there are no trips at all, we have to skip the Yearly statistics
alltogether, including the header line (that should display all the
dives added together).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now only use a slightly large font for the "Dive #" entry.
All other font sizes remain at 9px.
Another change is that we now attempt to use 11px for
individual row height. This makes the table at least 12px bigger
(n_rows * increment), but does not cut letters like 'g',
which go slightly bellow the font baseline.
Perhaps this can be improved later by adjusting the font
and row sizes again.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
nr was used but never initialized.
Also, the code removed used select_dive had likely just been forgotten to
be removed when the correct code using selectDive() was added a little
later in the function.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
c++ have some idea about in what order things should be initialized.
This makes us comply with that order.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same case for the first letter in the dive table column headers,
use '%' for both gases in the planner, and show "Start time" instead of
"Starttime".
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "air / water Temperatures" label didn't look to good.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We update the values for divemaster, buddy and etc...
Rating and visibility are currently displayed as "x / 5"
values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Following the new layout for the profile print, we separate
the used gas like so:
AL80 / EAN33 / ...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
There is not enough space for the last column in "6 print"
even for the english text. This gives more space extending
the row, but for some languages it will be an issue, thus
strings have to be eventually shortened by the translators.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
ProfilePrintPmode::truncateString() was not really needed,
because long text *should* be trunctated by the table itself.
Also we now are going to have multiple lines for notes,
so the auto-trim should work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Since some early bird thought it was a good idea to force the rest of us
to get up early by changing our clocks during summer, we can not use the
currentDateTime() to determine the timezone offset for all dives.
Instead, we just pretend that everything is in UTC and avoid doing the
offset calculations.
If only that early bird knew that if clocks stayed consistent throughout
the year then I could be asleep instead of fixing this in the middle of
the night..
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply clear the edited dive (regardless of whether it's set) and hide the
message if visible. The previous code was a little too convoluted...
Fixes#305
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need the marble data to go into a subdirectory of /usr/share/subsurface
and we need to search for both data and marbledata when trying to find the
theme.
Fixes#310
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'll admit that I don't fully understand this part of Qt.
But commenting out the deleteLater (like we already do for another one)
fixes the crash - and shouldn't do more than add a potential small memory
leak.
Fixes#309
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
'Show' verb is already shown in the groupbox title and no other
labels have it.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes ToolTip Item showing out of boundaries
Tooltips when in resizing animation.
Fixes#294
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes it possible to hide some columns on the Cylinders
Equipment pane. The 'remove' and 'type' are impossible to hide,
since they are the most important ones for a non-tech diver.
Fixes#281
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a bit more of gradient on the lines for the partal
pressure graph grid, it also moves a tiny bit to the side the
even numbers so it's easyer to read when they are too near each other.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous show and save code would have aborted at the first invalid
weight system. This makes sure we save and show all weight systems up
until and including the last valid.
If we had:
integrated: 1kg
belt: 2kg
ankle: 3kg
And changed belt to 0 kg, we would have only saved integrated 1kg, and
nothing about the belt or the ankle weights. This will save all of them,
and show all of them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code aborted at the first invalid cylinder. This instead finds
the last valid and prints all the ones up until that one.
Fixes#295
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive, a group of dives or a trip we need to make sure that
we don't lose track of which dives and trips were selected. Otherwise we
might act on dives that DON'T appear selected in the UI but that we think
are still selected.
Fixes#304
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have allot of helpers, use them instead of local variants.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since all internal units are in mm we needed to only update what's shown
on the interface.
Fixes#299
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a workaround, I plan to remove that toolbar from inside
of the Profile for the next version, but since it's there for now,
let's keep it.
This patch hides the toolbar when the zoomLevel != 0, since the
profile is unclickable while zoomed...
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch remembers the trip selection across the Dive Tree Model.
It's a tiny bit big because we used to have a variable 'selected
trips' that's now calculed dynamically - this is more future proof.
This is a start of Un-cluttering the view ( for 4.1 I hope to reduce the
code in this class to nearly a half. )
Fixes#303
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When resizing the ProfileWindow and the tooltip was out of
boundaries, it was really out of boundaries and there was
no way to get it back ( besides re-expanding the window. )
this patch moves the tooltip to (0,0) and don't save that
position, so when the window is re-expanded, it will move to
the correct location again
Fixes#237
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fix for 'double click on the map shouldn't zoom' had broken the
selection of the current location for the selected dive, this patch
fixes that.
See #291
Signed-off-by: Vinicius Machado <vsmachado@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds trip based statistics to the Yearly Statistics
view.
Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this every cylinder downloaded from a divecomputer that doesn't
provide cylinder data, and every cylinder manually added anywhere will
default to the default cylinder that is set in the preferences.
For people who most of the time dive with the same equipment (always on
dive boats with AL80, or almost always diving their personal HP119) this
should be a nice improvement.
If you don't like this behavior, simply leave the default cylinder setting
in the preferences empty.
This commit also fixes the incorrect s->value call (should be
s->setValue). I wonder what this did to the default filename before...
Fixes#145
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't do anything with this just yet.
And frankly, a drop down of the cylinders that we know of would be even
better. But hey, it's a start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive and clicking save button on menu bar, it saved
dive information but didn't mark dive as not being edited anymore.
For closing file, user should always click on the save button on
the bottom of the page and then saving it.
Now when clicking save button on menu bar, it will call the
accept_changes before saving to disk.
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Actually, it's not so much "work around", it's just "disable our eye candy" for
tags on Mac. This is quite frustrating. When we do anything that has the
QPainter touch the widget from our GroupedLineEdit::paintEvent() path then the
QPlainTextEdit::paintEvent() doesn't render the text of the tags.
Fixes#298
Sort of.
But I guess tag text without eye candy is better than eye candy without tag text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Later we spacifically enable the scale, but Dirk asked me to
use the bare minimum of marble.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Marble is a weird piece of Qt software, it seems that it wasn't
thought of being a library when first written. Most of its features
are not achieved by subclassing && overriding one of Qt default methods,
instead we need to eventFilter for almost everything ( which is a pain,
and a bit error prone - see our combo box delegate *puke*. )
This one's ready, only one thing though - if we want to implement
our own context menu, we will need to use the eventFilter, and not
the contextMenuEvent.
Fixes#291
[Dirk Hohndel: this does not disable the context menu for me...]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A user could have hiddden and lost any of the four panels
on the interface. Now when he chooses 'show all', if a
part of the interface is hidden, it will be shown again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think we should actually fill the app with tooltips and
whatsthis hints. justsain ;p
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better positioning of the text on the table cells. On KDE systems the
text got too near the line that divided the cells, this way the text is
placed on the middle of the cell.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the correct sizes of the tables when first opened. It was
defaulting to 'resizeToContents', but most of the cases when first opened
we got no content, and this was bad. Now I'm defaulting to 30 when on the
'REMOVE' column and 80 on other columns.
Fixes#189
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a gaschange to air happened, the code did
name += name=+ tr("air") which probably was due to the block being just
confusing with all the ?:
Unrolls to proper if statements, and fixes the bug.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a checkbox to be able to import csv files without temperature.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rewires things a bit to make room for new features coming.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before, when clicking the OK button on the preferences GUI, we were
updating in-memory preferences from the GUI, saving them to the
configuration file from the GUI, reloading from the file to the
in-memory preferences. Then, to add to the ducplication, when the
application was exiting, some fields were saved again.
Basically the first step and the last step were useless appart from
the fact the the other steps where missing a few fields here and there.
This patch removes the first step and fixes the missing fields.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
ACKed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an ugly hack as it partially breaks the ability to abort a selection
(so if you click outside of the combobox, the last value you hovered over is
selected). But this seems much better than not being able to select a different
tank at all.
Fixes#275
(and by 'Fixes' I mean "hacks to sort of make work"... but the trac automation
is rather inflexible in which words it understands...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This (together with the commits fixing the QMessageBox title) should
finally close all the issues in bug 250.
Fixes#250
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit hacky and simply adds the title to the message text when
compiling on a Mac, but hopefully this will be enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit painful, but we basically walk the samples and pick the
valid tank from the events. And then we do a simple discrete integration
to figure out the mean depth per tank and duration per tank. And then we
assemble all that into per tank statistics.
Strangely the value calculated here seems slightly higher than one would
expect from the overall SAC rate. This inconsistency should be
investigated a bit further, but my guess it it's based on the assumption
that the DC provided mean depth is possibly more accurate than what we can
calculate from the profile.
Fixes#284
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows to add missing gas change events to the currently shown dive
computer. Only gases defined in the Equipment section are offered.
Fixes: #250
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this commit one can hide all events of the selected type through a
context menu on the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Based on the code in the Gtk branch.
[Dirk Hohndel: whitespace cleanup and changed the message text]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the menu, it just doesn't do anything, yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows how much gas form each cylinder was used. I would like to add
SAC to that list too but it became a mess trying to calculate average
depth per cylinder.
Design based on idea in #284
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better handle the mouse movements on the add dive profile,
when outside of the canvas boundaries. It had bugged me for
quite a while, but this is so much better.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch re-enables gas selection through in the add dive profile.
Good thing ( and I really didn't think of that before ) is that
it is less than half of the code of the other implementation.
:D
Fixes#265
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't take into account that last == first when checking for
the first item on the list. Now the gas is correctly placed on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit removes obsolete code, there was a
gaslist selection when user clicked on the buttons, but
this shouldn't be anymore, since the next commit will
add a menu to select the gas for that particular point.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It looked kinda weird without a separator between the SP change and the
bailout.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Two errors fixed.
- With no location set, the summary line would start with a ','.
- When auto creating a trip for a manually added dive or when editing the
dates of dives in a trip, the timestamp for the trip was not updated
after editing the dive.
Fixes#293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The rememberSelection() / restoreSelection() functions ONLY handle
selected dives, not selected trips. This is a bit of a misfeature, but
because of that we need to make sure we clear our notion of selected trips
when we use restoreSelection()
Fixes#285
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
O2 + He + N2 = 100%
(well, there are some other gases, but this is close enough)
Since N2 can't be negative that means we should refuse any change where
O2 + He > 100% (or o2.permille + he.permille > 1000).
Fixes#280
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems like a much nicer user experience. Editing a location's name is
immediately reflected on the globe label, the moment it happens.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When modifying or adding a dive location on the globe widget while in dive
edit or dive add mode, we now show the modified / new location right away
on the globe (assuming a location name has been given). This makes it much
easier to manually reposition a dive location.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we are editing or adding a dive, the globe widget needs to act
differently. Instead of directly changing the lat/lon of selected dives,
it needs populate the coordinate text field as if this information was
entered by the user (effectively all it is is a way to more conveniently
enter coordinates).
As a side effect, this also allows us to change the location once it has
been added (you just need to go into dive edit mode to do so).
There is one weird issue that occasionally (and I can't quite reproduce
this) I get lat/lon very close to 0/0 (as if the globe widget was centered
on 0/0 and not on whatever it is actually showing). That still needs to be
addressed.
Fixes#239Fixes#131
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is about the right size, but the scaling pixelates the icons. So this
is not really a fix, just a hack.
See #269
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the order of the increase / decrease depth button on the planner
since 'bottom' means increase depth and 'top' means decrease. Sorry
I'm too undiver currently :)
See #269
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The number 0 means "this dive has not been numbered". So manually
assigning this seems wrong.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user doubleclicks on the number of the dive in the dive list,
this will present to him a dialog to change that number. Pressing enter
will renumber the dive if there's no dive with the same number already.
Fixes#288
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch is a crude attempt to 'anchor' the bottom of the Dive
ruler editor ( the new graphics ) to the bottom of the scene.
since QGraphicsView doesn't have a good way to modify the origin
point of an item, I'v just shifted all other items up a bit, this
way the 0,0 point is in the bottom of the drawing and I can safely
move it around, making it bottom-anchorable. :D
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This flag is added to all items on the parent, so there's no need
to implement this on all of them.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- get_gas_from_events does NOT always set o2/he. It only updates them IFF
a matching event is found; so we need to make sure we start out with a
valid gas mix
- the way we tried to restore the edited dive in case of an edit to a
manually added that is cancelled was completely bogus. Way too complex
when we can simply and reliably simply store the dive and then copy it
back
Fixes#270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When cancelling the edit of a manually added dive, we should send the
sample with timestamp 0 to addStop - that's a magic value and causes us to
add a node at 5m/15ft and 10 minutes instead. Since the dive always starts
at the surface, calling addStop is redundant, anyway, so let's just not do
that.
See #270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 85fab31c71fc ("Shift times of selected dives") we added a dialog
that didn't align its content very well. This change improves the layout
(I hope) and makes the labels in the layout clearer (earlier and later seem
easier to correlate with the direction of the shift).
The original commit also forgets to deal with the consequences of shifting
the dives. The dive list needs to be re-sorted (as the relative order of
dives could have changed) and be marked as changed. And we should try to
maintain the selection across these operations.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the possibility to shift the times of all selected dives
by a fixed amount to correct for time zone problems or mis-set dive
computer clocks.
Select the dives and right click in the dive list.
[Dirk Hohndel: added .ui file to FORMS and fixed some whitespace damage]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to check for this whenever we do something that directly or
indirectly closes the data file. Previously we were missing the straight
"quit". Also, we should consistently check for both editing or dive
addition. And lastly, we should use consistent language with commit
0e9cd09442 ("Make editing message consistent with button labels").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed the ugly icons on the visual profile editor and replaced them with
the much better looking ones that Luisa designed. This was not a simple
search and replace since Luisa's design was a bit more sophisticated.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This honors the sort order of the dive list when figuring which trip is
"above". It works both on a single dive or all selected dives.
This also fixes a couple other cases where the dive list selection and
trip display could get messed up.
Fixes#287
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Dive list no longer has messed up trip entries
- Dive list is now correctly marked as modified after trips are merged
- When data file is closed, the list of selected trips is cleared which
avoids a potential crash when loading a new data file
Fixes#286
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes Ok button to a Save button Modifies editing messages to reference
buttons Save and Cancel.
Fixes#245
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Allow ssrf as a default log file suffix.
- Allow sde/dld/db as import log suffices (we don't use the LIBZIP
and SQLITE3 ifdefs anymore)
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes it possible to set the coordinates on the map for
all selected dives. Note however that after a coordinate is set,
user cannot edit it unless he multi-edit it with a dive that doesn't
have coordinate's set. this is just because it's missing a 'edit coords'
button.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of hard coding a American date format, let qt use whatever the
locale suggests.
Fixes#248
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We incorrectly mapped the profile's widget tooltip based on the
global screen coordinates.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixed a crash with trying to show the tooltip on the profile,
with an empty profile. Since the widgets are not created yet,
we got a crash trying to access the toolBarProxy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This limits merging dives to dives that have at most half an hour of
surface time between them. That "half hour" is kind of a random thing
to pick, but it's not horribly horribly wrong.
It also changes the semantics of "merge selected dives" to something
that actually works pretty well: you can select a whole range of
dives, and it will merge only the ones that makes sense to merge. I
tested it, and it's reasonable. I could select all my dives from one
dive trip, and then do "Merge selected dives", and it did the right
thing (Dirk: I selected the florida trip, and it merged the aborted
"missed the trench" dive with the _actual_ "trench" dive).
I'm _slightly_ hesitant about this in the sense that maybe some crazy
person actually would want to merge dives with more than half an hour
of surface time between them, but it really doesn't seem to make much
sense.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch removes a duplicated method: get_divenr and
get_index_for_dive. The two are exactly the same ( if my
c is not broken, but I may be broken since I'm working like
crazy for almost 30h nonstop. ), so please take a good look
before applying this one.
[Dirk Hohndel: Tomaz took the slightly broken of the two implementations,
so I switched that out for the correct one]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I hit this bug on deleting dives and the newly selected
one got inside a trip, that wasn't expanded. anyway, easy one.
:)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes a selection just after the dives that got deleted,
or nothing if the list is empty.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the dive is deleted, we force a recreation of the dive list,
this is done because we were broken by design on the first transition
to the Qt infrastructure - one thing to change for 4.1, but no time
for 4.0.
We forgot to ask the headers to 'please, span more than one row,
please' when we recreate the model. easy =)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just reverts some wrong changes that I'v done on a
past commit ( sorry ) and correctly handles the selectDive,
by using a IDX instead of the dive pointer, as dirk told me
it's extremely error-prone since the pointer can change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When moving the horisontal splitter the cylinder and time/depth boxes
didn't scale down but got "stuck" on a certain height. This makes them
scale down when pulling the horisontal splitter up.
I would prefer if we could scale them individually, but i didn't manage
to get that going, but i didn't manage to get that going.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's very important when programming via Model/View, in gtk or qt,
to not mess with the model data outside of the model. We were
deleting stuff that the model controlled outside of the model, so
it thought that there was still data there. This fixes the deletion
part, but there are also lots of other parts that I'll tackle in
the next commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To our addStop method time = 0 & depth = 0 are a magic flag. And since we
always start at the surface, that is assumed, anyway. So let's just not
add a stop for that when re-creating a plan from a dive.
Fixes#254
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is nothing but an indefinite time sink. Let's focus on things that
the majority of our users actually need and use.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In various occasions the branches of selected dives
got collapsed because I'm dummy boy and didn't programmed
the logic correctly.
This one correctly works for the few cases that I'v tried,
I'm verifying if the current selected index is a trip or
a dive, and asking to expand it.
The expanded state is lost because we delete and recreate
the model ( and we do that because we can switch between
tree and table model ).
Now I think we correctly track the cornercases.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch changes the string 'collapse' to a more meaningfull
'collapse others', it also scrolls the view to the first selec
ted index, since after collapsing the others, things could be
in the wrong position.,
Fixes#233
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch enables tooltips on the profile toolbar. Tooltips were
being treated as text to be shown at notification area. Now it is
verified if the cursor was positioned over the toolbar when it
activated the event. If so, tooltip is shown normally.
Fixes#238
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No need to add more code to Subsurface by bringing in std::string too.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit enables a context menu to remove dive handlers,
because it was hard to find that ctrl+click selected it,
then a delete button press removed it. it's better now. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When completing tags, the case of the completion prefix
should not matter.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 0f50b73f9e ("Fix planner / add dive handling of DiveHandler
Points") some issues were introduced. While it is fine to remove the
artificial first point at the surface, the commit broke the special
handling for o2 == -1, i.e., the usual case where a default gas needs to
be picked.
This generalizes the algorithm previously used to also look to the right,
now that we are no longer guaranteed that there is a first point to our
left.
This also cleans up some whitespace damage introduced in the same commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk, is this really necessary or it's just something that you forgot
to remove? this is adding a bit of pain to fix some issues on the planner,
so I'm commenting this out untill you have a bit of time to look at it.
It looks like this was added to handle the gas in the pos-1, but you reverted
if so, this completely reverts it, and things works as expected again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds the first DiveNode at 5m / 10 minutes when clicking on the plus
button on the DiveNotes Table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Somewhere we broke this, most probably in the code that activated the
planner to be used together as an 'add dive'. This commit makes the code
workable again.
There's one thing, though. if the model is empty, this will add something
in the first point - it's behaving strangely. I'll try to fix this in a
way that's invisible to the user, but overall, why are we inserting
something in the first(0,0) time and depth?
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The air types model had a font bigger than the
other models, this patch creates a data() method
that correctly delivers the correct font.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What happened before was that the AirTypes model was only being updated
when the user requested to change the air by clicking directly
on the Air, in the planner ( but not on the Air Table. ).
This fixes it by calling 'repopulate' whenever the cylinder model
changes ( by adding, removing and changing something.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch closes the air list when clicing outside of it,
making the use of the planner more pleasant.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rewrite of the way we handle the last used directory for the loading /
saving of files.
we didn't reuse anything for the code, and that's error prone
and also dumb =p. Reworked that so we have a nice method
to help us out on that. lastUsedDir and updateLastUsedDir
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can wire qt to call the right functions directly, so we don't need
these members.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switch to using a QSpinBox instead of a QLineEdit. This makes it a bit
more intuitive and now you can see how the deco plan changes based on
the GF's.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the Gtk version there were no option to disable the showing of time
in the mouse over, so this removes that option to limit the amount of
clutter in the settings panel.
This also renames the time and temperature to match the names they used
to have. T -> @, Temp -> T
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mostly based on suggestions by Tomaz and Luisa (but with some changes
based on my rather strongly held believes).
I also tried to clean up the shortcut keys. Not sure if I got this right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This failed spectacularly when I first tried it, so I put it on the back
burner. And it appears that with all my recent fixes for "add dive" as a
side effect this is working, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I probably broke this a while ago, as I was not using the big
dirk dive file to test ( just using some random files over the
test folder. )
Now it's working as it should.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last commit correctly setted the minimumSize, but
I forgot to set the maximum size, and thus, it still
expanded. sigh.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the Air Types widget on the planner smaller,
since on most dives users will only enter 1 to 2 dives, it's
not good to have so much whitespace. this makes it smaller for
small screens, and it will grow on bigger screens where space
is not an issue.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes the last column adding a horizontal scroll on the dive list,
since we have the hability to show / hide columns, I had to create
a helper method to discover what is the last column and set the
size of it very small so no scroll is created.
Also, I'v set the setStrechLastSection to true. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the edition of alphanumeric input,
columns like depth accepted '23ft', '20m' or '30', with
an inplicit conversion to the unit. But the code ignored
that the input could have a 'ft' or 'm' ( ot anything else
for that matter.
Signed-off-by: Taiane Ramos <exhora.tat@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit scares me. Any pointers to dives or indices into the dive
table... anything like that is invalid after we resort the table. Well,
not technically "invalid" (as in bad pointers), but after re-sorting the
table these will possibly not be pointing at what we expected.
This starts with the selection being "wrong" after we add a dive that
isn't the last dive (once we click OK the chronologically last dive will
be selected).
But of course without doing this, our #1 assumption about the dive_table
is broken. The dive_table is supposed to be in chronological order.
Best advice of course would be "don't enter dives out of order" - but of
course that's not realistic.
Fixes#234
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. Normally you would expect someone to edit the tank data by
simply clicking on it in the equipment tab. But a user could conceivably
edit the tank data after clicking on the profile editing button instead.
This works now as well.
This also addresses the issue that start and end pressure were not shown
in profile editing mode.
Fixes#235
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We remember what was selected before and restore it. Maybe there's a more
"Qt way" of doing this, but my implementation appears to work :-)
Also remove unconditional debug output that snuck into an earlier commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When right clicking a dive on the divelist a dialog for selecting a dive
was opened. However, Save As requires a getSaveFileName dialog so that
user can give a new file name as well as selecting an old file to
overwrite.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed this one spot when converting back to the different semantics for
divedatapoints.
With this change add dive appears to work correctly (fingers crossed).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We carefully assembled the correct data in the cylinders - don't replace
that data when manually editing a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise adding a second cylinder (to the default one cylinder of air)
and subsequently changing the gas of that cylinder will illogically change
the gas used in all the segments.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- you can no longer delete a tank when its gas is in use
- therefore you can no longer delete the last tank
- when you change the gas mix of a tank, the corresponding segments in the
dive change as well
- when changing gas for a segment the correct available gases are offered
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now hardcoded to AL80. This way in the future we'll have a volume of
gas that's available. And this makes much more sense then a random string
in the description field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the argument could be made that this is just a symptom of Subsurface
getting very confused about the selection (which it still gets at times -
most likely we are calling select_dive() instead of selectDive() (or the
corresponding deselect functions) in places where we shouldn't), but
either way, we should not crash.
Fixes#220
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We previously did did bad things when running with an empty configuration.
This attemps to clean it. We will now correctly handle the splitters in
almost all cases ( if I didn't break anything on the way. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the offending commit a QWidget was changed to QTableView, but
only in the header - and thus making avaliable all method calls,
but the initialization of the widgets was still a QWidget, and
nothing of QTableView was used besides an incorrect call to
setColumnHidden.
This commit fixes that by using the view() method provided by the
TableView implementation which returns the true QTableView that should be
used for specific nitpicking, like hidding columns. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let the user choose if the calculation of ndl and tts is worth the time
it takes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously gps information was always overwritten, unless the user had
modified it in the current editing session. This causes problem with
some use cases, like when coordinates are provided before the location
name by the companion app.
Now gps information is only overwritten when it is:
- Empty
- Auto-completed in the current editing session. (When the user hits
accept it is considered hand-edited.)
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now offers the correct gases for which we have cylinders defined.
For both the planner and add dive we still don't end up with the correct
cylinders in the resulting dive. But that's for another commit to fix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should leave the program in a consistent state after add dive was
cancelled (and do the right thing in case the dive list was empty).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that we do the right thing with the staging drive,
that we don't mess up the selection, the we are smart about using our
helper functions, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This partially reverts changes in commit 1b655d5c806b ("Correctly track
gases when manually adding and then editing dives") as it turns out this
did NOT help us correctly track gases (which is ironic, given the title of
that commit). I didn't actually want to revert that commit as
infrastructure has changed since then and this made the patches look even
more incomprehensible.
So we are back to tracking the "gas on which we arrive at this spot" in
each dive plan node as this makes the rest of our planning so much easier
- I had forgotten about the reasons why we did things this way when I made
the above mentioned commit.
Instead we now make sure that our available tanks are added the correct
way, that such entries are ignored when planning and when drawing the
editable profile, and that at the end it all gets assembled correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make the planner work this adds a new column to the Cylinder widget
(depth - for the depth at which we want to change to a certain gas
during deco).
This also tries to hide that column in the equipment view and hide the
start/end pressure columns in the planner view. Oddly that fails :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the gases for which we have cylinders are offered in the gas selection
list and correctly recognized and added for the plan.
Still tons of work to be done to make this work the way it is designed,
but we are getting closer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caused us to get royally confused when manually adding a dive and
trying to set the location through the marble widget.
Fixes # 229
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in preparation of using those to define the gases available for
planning.
Right now this doesn't seem to work quite right - I don't get the
auto-completions for the cylinders that I was hoping for...
This commit also corrects the tooltip for addint dive data points.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Insert the dive data point at 0,0 manually at the beginning of the plan.
Now everything should work. We still can't edit a plan created like this,
but at least we can once again plan things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So in case the OK button was relabeled to 'Retry', relabel it back to OK.
Also, 'Retry' should be capitalized.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user could add a dive, and in the middle click on the 'plan'
button. Since we didn't cared about that on the widget, a lot of
inconsistencies could occour. this fixes that by setting a flag
on the Planner, that has now three modes: nothing, plan and add.
(maybe in the future an edit mode will be valid too.)
If in 'NOTHING' mode, user can enter the addition, edition and
planning. If in any other mode, user can't do a thing. The mode
gets back to NOTHING when user accepts or cancels a plan / add
/ edition.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Garbage was left behind when canceling edit dive, and thus when the user
set his dive to be editted, after a first canceled edition, all points of
the first edition got messed up and showing on the second dive too. if the
user clicked 'ok', he got a really bad surprise.
Fixes#226
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch saves and restores the state of the TreeView after the user
clicks on another columns that will make the tree disappear. All of the
branche states are saved, this way the expanded nodes will be restored
when the user gets back to tree mode.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a try: when the user changes the orientation on the columns
by clicking on the title of them and organizing by something that's
not the number, we lost track of the opened branches. this commit
doesn't fix that, but it fixes a possible similar issue.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I got a bit lost trying to find the code that handled DiveList columns
today, so I thought it was better to move it to its file, after all we
do have a divelistview.h :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just proves one point: I'm retarded.
I moved some code around and forgot to close the old group, so I created a
group inside 'MainWindow' that handled the ListWidget, wich was not the
right thing to do at all.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I basically rewrote the way we handled the splitters. It now uses a state
to know what it's doing, and will only update the value of the
saved-to-disk splitter size if the state shows the splitters (currently
only VIEWALL), where all the other states should hide the splitters, and
the values of the splitters don't matter.
Fixes#225
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code had quite a few odd special cases that may have been left-overs
from the old Gtk algorithm. With this the gas is actually in the dive plan
node where it's use starts. And we maintain the gas correctly between
multiple edit sessions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to make sure that the correct segment has the correct gas assigned
to it - and that those gases are correctly tracked when editing a manually
added dive as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of rounding issues we need to use our macro to test for air
(especially since the events store gas percentages and not gas permille).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the model name is written into the XML file it has to be a literal
string that isn't translated. Otherwise a datafile written in one locale
behaves differently when opened by Subsurface under a different locale.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When dealing with autocompletion, tag usually means "take this, move on".
In the tag widget the tab was added to the tag itself (and then stripped
when the input line was processed). Not exactly useful.
This feels a bit "hackish", but it seems to get the job done.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On equipment tab, when editing a cell and then clicking on cancel button,
it would delete all the cylinders table. Now it performs the original
behaviour of recovering the original value of the cell and don't delete
the table.
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also hide ui.CoordinatedLabel when editing a trip,
since ui.coordinates is hidden.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I still wonder if we have all the semantics correct for multi dive
editing. This will need more testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging dives, the indices of the following dives change - so we need
to adjust the variable used in the for_each loop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A call to DiveListView::reload always reset our sortcolumn to be 0.
Instead we are tracking the correct sort column and sort direction.
This also removes an obsolete private member that was unused.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The TagWidget behaves now similiar to a QLineEdit.
Pressing Enter/Return will now close the completion widget.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
A custom tag widget has been added to MainTab.
Tags are seperated by a comma ",". The implementation
supports escaping a comma by using "\,".
While typing, the widget supports the user by suggesting
tags using a QCompleter.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
This enables undo for the edit mode on added dives, it uses the
premade backup to fill the old dive with data. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Changed the backup implementation of the samples on EditDive,
it's way cleaner now what's happening, and it's also better for
the cancel edit.
Next: The Cancel Edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
This patch enables editing a dive that was manually entered,
it doesn't cover dive plans yet because on the plan I need to
figure out what are the 'user-entered' points, and what are
the algorithm point. and I feel lazy. =p
One last thing that's missing is to revert the dive to the
previous condition if the user cancels the edition, currently
canceling and applying ok is the same thing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Added a new option to edit the dive in the profile view. The option
will only be visible if the dive was manually entered or if the dive
is a plan.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
We cannot use tr("").toLocal8bit().constData(); on a function
that expects a char* because the object will be deleted on the
next line, so a strdup is necessary.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
This adds alt-f shortcut to access file menu as well as other similar
alt based shortcuts for other menu items.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setupSplitters method was created quite a while ago
to deal with the splitters when I didn't used a more sane
approach. I forgot to delete it back them, removing now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch does the hooking up to show the dialog of the
divelogs.de window when the user selects it on the menu.:
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch moves around a few items on the menu to a new submenu
downloads/uploads. I think it's not the best way, but it already
fives a bit more of 'unverbosity', because the old menu had
'Download from Dive Computer', 'Download from Webservices', and
now we would introduce a new 'Download from Divelogs.de'
I tougth it was better to have a 'parent' named 'Download' and
put all children inside. this can grow quite big as soon as I implement
the plugin system for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the skeleton code for the Download / Upload from Divelogs.
de webservice. Now I need to hoopup things from the .ui side and
do the actual implementation of the code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The setting was 'webservice', but this is too wide, since we are
supporting more than one. changed it to 'subsurface_webservice_uid'
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a WebService dialog that will handle download and upload
from all child based webservices. Also, ported the currently - only
- one webservice to use the new dialog.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Implement exporting in UDDF format as was done in Gtk version. File menu
exports all the dives, right click on selection exports the selected
ones.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's not written purely in C anymore. There's quite a lot of C++ now,
not to mention Perl, XSLT, shell scripting, etc. :-)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The popup menu entries should be all lowercase.
Also we should handle this the same as regular save and open when it comes
to remembering the last path.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the 'Save As' option on the dive list,
very straigth forward, just simple and beauty.
tested and working.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tracks the autogroup state remembered in data files. Toggling the
checkable menu item causes the divelist to be marked as changed. This
might actually be untrue - but that's really hard to track so this is the
"better safe than sorry" approach.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Marble had a bug on the way it treats zoom level, there's
no way for it to find out if it's user-input or algorithm input
and when a user clicks on a dive, it spins and centers on it,
but if the user clicks on another dive when it's still spinning,
it will get the zoom in the actual state ( spinning, usually zoom
is far away from the first position ) and continue the spin to the
other position.
This patch works by saving the first location and triggering a
helper function with a timer that will only update the zoom level
if the timer is not active ( and thus, will not get the bugged
zoom state set by the animation. ).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is really nice to have when looking at specific parts of a dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelist.c:
get_dive_date_string()
get_short_dive_date_string()
get_trip_date_string()
MinGW support for *printf and parameter positions (e.g. %1$d)
is horribly broken. Instead of implementing *proper* support
for this feature Microsoft decide to ignore the standard (again)
and they implement new functions with the '_p' suffix,
such as 'sprintf_p', which seem to be available from a 2003 runtime.
To top that 'sprintf_p' is not really a 'sprintf' but rather
a 'snprintf'.
It seems that the MinGW people ignore the issue and do not provide
wrappers of any sort, or at least for the current recommended compiler
for Qt 4.8.5 on Windows - which is a 4.4.0. A note of warning;
inspecting how MinGW does certain things in headers such as stdio.h,
can ensue bad dreams or other negative effects on to the viewer.
This forces us to move the following functions from the 'back-end'
(divelist.c) to the 'front-end' (qt-gui.cpp) and use QString.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch implements GUI for importing CSV log files. One is able to
configure what columns contain time, depth and temperature fields.
Pre-configured log applications currently included are ADP log viewer
and XP5. (Both of these use actually tab as separator, so the field
separator currently hard-coded.)
[Dirk Hohndel: minor fixes]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Going through pixmaps for the profile was not needed and was making our prints
look very pixelated.
In Qt4, QWidget child classes are printed as bitmaps. So appart from
changing the code to print the tables to use a QGraphicsView instead,
there is nothing we can do, so the rest of the printing is still done as bitmaps.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently qmake can't tell that #include "version.h" and #include
"libdivecomputer/version.h" are not the same thing. Instead of spending
another bunch of hours on fixing the buildsystem I decided to just cleanup
the spots where we actually use the version file and rename it to
ssrf-version.h.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch restores the ability to move the info-overlay panel on the
profile. For some reason the eventFilter wasn't working (and actually,
looking at the code, it really shouldn't, because I didn't see where I set
it to work, maybe someone (me) broke it a long time ago) well, it seems
fixed now at least. :)
Tested on XFCE, Gnome and KDE, with three different window managers.
[Dirk Hohndel: removed debug output]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add units to the SAC in the print-out, reduce max depth in metric to one
decimal place, and leave some more characters of the notes to be printed..
Signed-off-by: Robert C. Helling <helling@atdotde.de
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't do "obvious cleanups" at 4 in the morning when you can't sleep because
of emotionally draining issues outside of your control... and if you do,
at least compile test them.
This was introduced by me in commit 2f9f46cb0253 ("Random white space
cleanup").
Sorry.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This Patch fixes the tab behavior on the QComboBox
delegate. For a QComboBox, tab was being treated as
'cancel' action on edit, but since it will send a
editingFinished() signal, and the Qt::Key_Return
will also send a editingFinished() signal, I couldn't
use that method and had to do a little hack around it.
The code is mostly clean and works.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Function is redundant as we should only render the profile
with a custom color table.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the active font (fnt) use the 'size' member of the received
text_render_options_t. This allows changing the size of
certain text elements.
For the moment most text elements are set to 12px.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of varying font (screen) DPI we use pixel sized fonts
when printing. Apparently 8px does not look that good on Windows
default fonts, but kinda OK on Linux. We compensate by
increasing the font size and table rows to 9px.
Also decrease the padding between the table and profile to 5px.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a report that the depth and time texts were small
and require more contrast on the B/W print. Use BLACK1 for these.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Custom widget frame styles such as 'Sunken' and 'Raised' which seem to
varry between OS will be captured as well:
http://harmattan-dev.nokia.com/docs/library/html/qt4/qframe.html#Shape-enum
So instead we temporarily set the profile frame to QFrame::NoFrame and
then restore it to the previous value.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enabled a file selection dialog for selecting default log file
under the preferences.
[Dirk Hohndel: added missing declaration to .h file]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
entry->ndl is computed and therefore should not be used for showing
the DC's ceiling. That made the DC ceiling jump to 0m when the computed
celing was at 0.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
CylinderModels::setDive() and WeightModel::setDive() have
potential to pass the 'last' argument to beginInsertRows() as
a negative number which triggers an assert that 'last' cannot
be smaller than 'first'.
Patch attempts to fix that by only calling beginInsertRows()
when there is at least one row to insert.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The end pressure was appearing in the column headed "O2"
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive planner always showed the depth in our internal units, ie
millimeter, in the sidebar that showed the plan points.
That made little sense in metric mode, and none at all in imperial. The
_graph_ showed things in meter and feet.
So make the DivePlannerPointsModel always convert things to and from the
user units.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are other models ( Tree Models and Model Items
) that are not affected by this commits, this is
already a good cleanup but it can be extended
to also fix those two other possibilities.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Second model converted to be less boilerplated,
there are right now 7 models that will need to
be ported. each model can remove around 30 to 40
LOC, so this is not such a bigger improvement,
but it's an 'keeping an eye on the future'.
Also fixed a bug where the returned value was dummy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Model View system in Qt is *very* verbose, this is the
beginning of a series of patches that will concentrate
the boilerplate somewhere and reduce the amount of lines
and will also try to make the code cleaner and easyer to
understand,
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
There's a C++ way for it. And, for some reason, it wasn't defined on my
MinGW build:
qt-ui/profilegraphics.cpp:1006:57: error: 'MAX' was not declared in this sscope
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Patch enables the 'Profile on top' / 'Notes on top'
functionality in the print options dialog.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After selecting a dive or a series of dives, the "Stats" tab shows the
minimum, average and maximum stats for the selected dives. The "Depth"
section does not display the correct value for the maximum depth.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a helper function to unify the calculation of the
weight display string, instead of having the same calculation
in two places in the code.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes some unsane values that was being retrieved
by the ui-files on first time opening. it creates a basic layout
of the application using the current desktop size.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Some columns are a nice addition, but not a must have,
and thus are hidden-by-default, uncluttering the user interface.
This was discussed with a few designers before writting the code,
and also discussed with dirk on irc.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
"Weight" was misspelled "weigth" in several places in the code
and comments.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface stores weight values in grams. When displaying lbs,
the dive list was not rounding the converted weights up, but
rather truncating the value at the decimal place. The equipment
list was rounding the converted weights up. This gave two
different displayed values for the same weight value.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those preferences removed ( basically the ones about visibility of
the List View of the Table ) are now managed by the Qt Settings
system, and thus there's no need to have them there. wich gave us
a pretty good cleanup.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Some people (free divers) are loving ft/s or m/s units for vertical speeds.
Now they can choose between /min or /s in the configuration (only Qt UI).
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For a new installation, subsurface will now start on fullscreen,
this fixes the bug where subsurface would start using the interface
file ( mainwindow.ui ) configured size, and that silly monster
always changes when editing something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The first time the user loads subsurface, the default_filename
is not configured yet, but yet the software tries to load "",
sending an error message that this file doesn't exists.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Taiane Ramos <exhora.tat@gmail.com>
If we #include "qt-ui/ui_anything" from anywhere, the Makefile rules
will blow up.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When straight decoding the event, it failed to handle older
SAMPLE_EVENT_GASCHANGE(11), the ones without he-part correctly. This was
shown clearly when it printed the 21/35 in dives/test20.xml as air.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't use any of the Standard Library features or classes in
Subsurface, except for three uses of std::sort, for which I added the
necessary #include.
It's always a good idea to include directly the headers you want,
without relying on indirect inclusion
On my machine, the build time dropped from 16.96s to 13.38s or a 12%
improvement.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still don't like the order dependency - but at least this seems to work
and correctly build after make confclean.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we don't have to new/delete them, which is a waste of
overhead.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we can also remove the forward declarations.
This is the first step in removing the memory allocation for the ui
sub-classes. Without the second step, this commit is just making the
compilation time increase for no good reason :-)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
PrintLayout::printTable():
- hide the QTableView widget border using a stylesheet
- add a guard to fix the last column extending post the page width
due to rounding
- use 1 extra pixel instead of 2 when grabbing the page region
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a couple of classes and some other modifications
in PrintLayout that handle the printing of tables under a profile.
models.h : ProfilePrintModel
The class uses a 'struct *dive' to output all required data
for a certain dive at specific rows and columns. It also handles
font formatting and text alignment.
modeldelagatates.h : ProfilePrintDelegate
The class is used only for drawing a custom grid for profile tables.
PrintLayout::createProfileTable()
The function is used to create and setup the profile table object
PrintLayout::printProfileDives()
The function now has correct padding of dive profiles on a page
and also the printing of actual tables below them.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding +30 (seconds) to the position works fine for long dives but
when zoomed in on short dives, 30 seconds are a lot.
This commit sets the offset to +10 px regardless of the scaling.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
The toolbar adds two buttons to the profile.
The user can now toggle the scaling (zoomed to dive/round up to 30 mins)
and adding /removing ruler to/from the profile using this toolbar.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
This patch adds a ruler QGraphicsItem which can be dragged
along the profile. The ruler displays minimum, maximum and
average for depth and speed (ascent/descent rate). Also, all used
gas will be displayed.
This also adds a new attribute to struct plot_data to store the
speed (not just as velocity_t).
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
printlayout.cpp(h):
This patch cleans some test code and adds the function
printProfileDives() that accepts a number of dives
per rows and columns. It can technically fit any number
of dives on a page given the page size allows it. Both
landscape and portrait layouts are supported.
It now replaces the old methods:
printTwoDives()
printSixDives()
Space is reserved for data tables that will be placed
bellow profiles on a later stage.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Gtk+ style on the Gnome shell is somewhat broken on Qt for
some reason. This hack pokes the system, checks if it's running
gnome-shell, and if the current style is gtk+ ( I couldn't just
check for gtk+ since it worked on XFCE and other Gtk based enviro
ments. so a double check is needed. ) then I changed the Pallete
of the affected widgets by hand.
not a pretty hack but worked.
[Dirk Hohndel: redid the patch to be simpler and more consistent]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix the positioning of the `add` button when on Gtk style,
in my XFCE install (and thus, may differ a bit from the
Gnome3 one ) the Plus button to add cylinders and weigths
got really strange placements, this seems to fix this,
I also tested on Oxygen and nothing broke there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes the cylinders and weigth edition
by keypress. I don`t know when I broke this and linus found,
most probably when I added the code for showing the
cylinder size and working press while moving the mouse
around the list - sorry guys.
So, now this *seems* fixed, tested for a fairly good
amount of time and everything seemed ok.
I was unable to reproduce the behavior that linus got
on two value overlapped on each other, tougth.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes the display of subsurface in smaller
screens by creating ScrollArea containers that are
now englobbing each of the Tab-pages and the Planner
Widget. Some of those widgets were pretty big by the
amount of things on it and it was too big for small
( 14" and 15" ) screens.
This seems to fix it, and looks good both on Gtk+ and
Oxygen styles.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is much better looking in the Oxygen style, and
on the other styles it looks like crap - so let`s not
use that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch eliminates 18px offset from the MainWindow main
layout, making the window feel less spacy. Good on the Gtk+
style, but seems to also make a good work on the Oxygen one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fix some stuff concerning the pretyness of subsurface while running
on Gnome and XFCE enviroments. This is the kind of stuff that I
really didn`t want to put on the code but sometimes it`s for the
best. this makes the MainTab much more bearable. There are still
things to fix, like the size and positioning of some of the icons.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch removes the magic indexes used to control the mainwindow
display of the profile and planner by an enum. a bit more verbose
but hard to miss.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Since the cylinders and weigths have other data attached
to it, like size and working pressure, one could mess the
other data and want it to revert to the cylinder / weigth
defaults, but for that the user had to choose another
item, then go back to the previous one, so the cache would
be clean.
This patch fixes that by reverting the values to the
it fixes linus bug n2, where he had invalid data
on the other fields and had to go back and forth for it
to be fixed.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, the ComboBox is a beast, and when used on a Delegate
it's very hard to get things right, wich is a pitty, because
I overly like qt. So:
1 - Combobox needs to show the popup when user press ↓ and ↑ keys
2 - Combobox needs to select when user press enter, not twice.
3 - Combobox neesds to select when user selects from the mouse, not
pressing enter after.
4 - Combobox needs to not mess with stuff when moving around.
Everything that I listed there works on a non-delegate combobox,
but for some reason, a delegate missed those, so I reimplemented
all. not nice, but now we have a code that will work, I hope.
*fingers crossed*
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This code hooks the plus button on both cylinders and
weigthsystem tables to trigger the enableEdition() and
thus the work done when you click on + will be saved /
discarted when the user cancels the plan or accepts it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This bit of magic actually performs the save on the
dive list for the changed weigths and cylinders,
it will set the cylinders only if there's a change
on the cylinder model, and it will set the weight
only if there's a change in the weigth model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The old code marked the dive list as changed on any
of the changes in the model, this was incorrect since
the user could just cancel the edition, wich means
that the divelist shouldn't be marked as changed at all.
when the user clicks on'accept', and the item is indeed
changed on the dive list, then we mark_divelist_changed
to TRUE
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'changed' member on Cylinders and weigth models to mark when
one was changed or not. Only the changed data should be inserted on
the selected dives, so if the user changes the cylinders on a multi
edit, there's no need ( and it will actually break things if we did that )
set the weigths too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch enables edition on the selected dives as soon
the user press delete or any other column on the Cylinder
/ weigthsystem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch enables canceling the edition of cylinders and weigth
systems, as soon as the user press cancel, the old values are
re-populated on all selected entries.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This creates a placeholder for the equipment edition,
it will ease the 'revert' and 'apply' when editing
multi dives.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
One more corner case that we cover correctly.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of getting data from Qt just use our internal notion of the number
of selected dive to decide if more than one dive is selected (and
therefore if we need to show the 'merge dives' option in the context
menu).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is fairly straight forward. What I dislike is the check for the magic
number of "14 indeces". I'm sure there's a better way to tell if more than
one dive is selected...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
plot_data.o2 and plot_data.he was wrong for all dives, due to that
cylinderindex was set right first in populate_pressure_information, and
thus those two contained bogus information.
This makes the plot-text use cylinderindex-lookup as everything else.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Things need to be cleared out and disabled. But fixing this bug leaves
another issue - while the newly selected dive after a delete acts as if it
was selected, it doesn't show up as selected in the dive list.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was not as hard as I assumed it would be. I may still change the
horizontal dimension to be the more logical seconds instead of minutes,
but for now this achieves the main goal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I always disliked the fact that when you moved the handlers around you
could just 'run over' the neighbors. This also (as a somewhat intended
side effect) prevents vertical descents and ascents).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm sure there are more issues like this where we need to handle things
differently depending on whether we are planning a dive or adding a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This solves the odd case when closing the data file that clicking in the
info widget caused the input fields to respond and the little warning icon
to show up.
Also some minor whitespace cleanup for readability.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This mostly happens with no XML file or when closing the current XML file.
Sadly the user still can click on the empty date field (even if nothing
else is active on the screen) and a date reappears.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only look up the dive number of a previous dive if there is a previous
dive.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the close action is triggered while there is no current dive (empty
history), the info widget is enabled. To avoid this behavior, we only
enable the info widget during update if the dive index is valid.
Signed-off-by: Alexandre Dupas <alexandre.dupas@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add two more rows to the widget - this is getting quite busy.
There still is some weirdness where the focus isn't returned where it
should be and a few other details, but overall getting there.
Added helper functions to parse a temperature and to deal with the
timezone offset - with that latter one I also fixed the time offset bug in
the planner.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is much friendlier than just showing an empty profile. I picked a
nice and simple three level dive. 25 minutes at 18m, 15 minutes at 9m, and
a safety stop.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If this is the last dive and if the previous dive had a number, give this
dive the next number.
Of course there are a couple of issues with the current implementation. We
have no way of changing the date / time of the added dive, so we KNOW that
it will be the last one. But I put that check there so that once we add
the ability to change the date / time (and hopefully remember to then move
the dive to the correct spot in the dive_table), we only assign a number
if it is the last dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was surprisingly easy - which of course has me worried that I'm
missing something that I should do when cancelling out of this dialog.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets things mostly right.
It creates a dive and uses the planner widget to create samples which are
copied into the dive. It fills in some reasonable defaults (DC model,
timestamp), but doesn't allow editing the timestamp (or the temperatures
and air pressure).
On accept the planner gets reset and the dive appears correctly in the
dive list.
Cancel still needs to be handled.
And I bet there are many subtle bugs lurking here and there. But it's a
start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reset coordinates properly when clicking undo.
When auto-completing location, only copy coordinates if they have not
been manually edited.
Set the background to red if the gps coordinates won't change, e.g.
there is a parse error, the change is too small or only whitespace
changes.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the planner update its display continuously upon moving points
including deco. This appears fast enough on typical PCs. If this ends up
being to slow on some systems we may have to make it configurable.
[Dirk Hohndel: cleaned up the two patches and turned into one commit]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This looks like it might work, but since we keep recreating the dive, the
info entered in the info pane is actually lost. But it's a step in the
right direction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In add dive mode simply bring the diver safely back to the surface
(currently with a fixed ascent rate of 30ft/min (or 9m/min)).
We should make that rate configurable (for the planner as well as the dive
add function). Also, the dive add function should offer to automatically
include a safety stop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now this is just calling the same code and setting a flag whether we
are planning or adding a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Message and the ok/cancel buttons on the Equipment
Tab, they don't control the Equipment edition yet, but already
does the same as the Notes one, Now I need to merge the other
part - the actuall Equipment Edition.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Adds a Warning icon on the changed tabs, this is important as
usability, for you could change something on the 'notes' tab,
change the tab and did't realized that something was changed
( by forgotting or something ), then clicking on the cancel
button. so now there's a friendly reminder that you actually
changed something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Some cleanup was needed in the MainTab code for ages,
now the Edition / Cancel / Ok of the Notes tab is
way more intuitive on the code level.
This is needed to support multidive edition on the
Cylinders and Weigths too, since it's a bit more
complicated, I didn't want to start with a Spaguetti
Code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Equipment tab was opened by default, it should be DiveNotes
as per the old GTK version. this fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is really nice to have when looking at specific coutures of a dive
or events.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a crash in the current Qt subsurface code that can happen
after downloading dives from a dive computer, and the new dives merge
with old dives, causing the old dives to be re-allocated into the
merged one.
In that case, the list widgets don't get fully updated, and contain
stale pointers to old dives that no longer exists. Doing anything that
refreshes the display will hide this problem, and you do need to have
multiple dive computers on the same dive to trigger it in the first
place, so it's reasonably hard to hit, but very annoying when you do.
This patch just makes us reload all the dive UI tables, which may be
overkill. It also doesn't actually fix the fact that we seem to do
"process_dives()" within the context of the downloader thread, which
looks like a possible source of races. The "process_dives()" should
also be moved to the main thread, but needs the preferDownloaded()
information that is part of the download window, so it doesn't fit
here. Somebody else (Tomaz?) will hopefully fix that part.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Coordinates are copied when auto-completing location, they are also
displayed and editable in maintab.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to a bug in how the entry-list was handled, a point on the polygon
was introduced at 0,0 that made a weird pink triangle across the whole
profile. This was quite clearly seen in dives/test15.xml
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This almost fixes it, but the offset from UTC isn't calculated correctly
it seems. Committing and hoping that a Qt expert can help.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Plotted the Scale on the Ruler in the planner.
There's a tiny bit issue - mostly noticiable while resizing,
but it's not a killer.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Planner should be 'almost' like the profile, with the possibility
to use the mouse and keyboard to input a new plan, so this is a bit
of 'getting there.' I don't like too much code duplication but since
the current Profile Graphics is a crude cut-and-paste from the old
Cairo backend, it's easyer to start from scratch and have it well
organized as Qt code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ok on the planner now correctly creates a dive,
a few remarks, tougth:
1 - the number of the added dive is always 0
( but I may be testing it wrong )
2 - the information pane is working only when
the mouse is clicked, this is a regression and
it will be fixed. ;)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The dive plan was bein created on the Profile, this
While this worked out, it created a bit of spaggethi
code, so now the model will take control of *everything*
on the planner.
I tested it quite a bit and doesn't seems to have appeared
a regression, wich is good.
Now that a dive plan is bein created, I can just save it. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plug the cancel action on the dive planner ( before that, only by
hitting the 'ESC' button things worked, so now you can also click
on the Cancel box that's on the right of the planner profile window.
Also, the beginning of the 'ok' code is also at place.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Position the X and Y labels of the rulers, this way
it's a bit more clear the deepness and the length
of the trip. It's still not the best approach, but
I'm getting close.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
When updating the weight system model we have to remove the old ones and
then correctly count the new ones.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is correct C. But debuggers in C++ mode are broken and can't display
the global variables. While I hate having to do this change, I hate not
being able to debug my software because of broken tools even more.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code to initialize the weight systems from the last datafile loaded
had not been brought over from the Gtk version.
We now correctly update the data structure when loading file (but not yet
when editing values).
Most likely the same needs to be done for the tanks as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Removes the InterfaceThread
which is basically an unecessary proxy between the MainThread and
the DownloadThread.
* Use a state machine to control the DownloadWidget UI logic.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Clicking on the plus button now adds a new stop on the planner.
The depth is always 10m and the time is 10 minutes after the
last stop. can be changed by double clicking or dragging the
balls around the canvas.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signal that the model changed when editing plan specific information,
when you changes the ATM pressure or any other information, the
graphic of the plan will be generated again to mirror your actual dive.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plug most of the dive planner controls that weren't
plugged yet - StartTime, ATMPressure, BottomSAC,
DecoStopSAC, LowGF and highGF are being used by
the calculations now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Enabled the CC SetPoint settings on the table, changing
it will automatically reflect the canvas. Also fixed a bug
that prevented the 'Air' handling on the diveplanner
table to show the list of options using arrow up and down.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Command line execution of Subsurface happened before the
GUI was created, this leaded to various bugs by me(tm) over
time. This patch seems to fix all of those, by reusing the
same code for GUI interaction and CommandLine interaction.
I had to rework how the main.c worked, it used to be C code
calling C++ code, and this is non desirable, since C doesn't
really understand C++.
I Moved all of C-related code to 'subsurfacestartup.c/h' and
created a tiny wrapper to call it, so all of the C code is still
C code, and the new main.cpp calls the mainwindow->loadFiles and
mainWindow->importFiles to get rid of the bugs that happened before.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a incorrect signal-connection call that should'nt
be there anymore because the TableView now correctly
knows what to do with models.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Merged the shared code for the three table views into
one code, this way less code is needed if we need to
construct another tableview in the future.
I still need to clean some of the models too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed showing the profile and info window when opening
the program. For some reason ( easy testing of the planner )
the planner was being opened instead of the profile and
info window. now everything's back to normal.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
"weight" was spelled as "weigth" in a few places in the code, but
more importantly, it was misspelled in the preferences dialog.
A minor nit-pick, maybe, but it still drew the eye in the dialog
and looked weird.
Signed-off-by: Benjamin Fogel <benjaminfogel@yahoo.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code now seems to be mostly working. There is unfortunately
a QAction shortcut conflict between the implementation and the
MainWindow. - I'm gonna fix that in the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The plus sign for time was in a very strange position,
this puts it back to where it belongs, plus a bit of
code cleanup since the planner was in heavily modifications,
this will be needed quite a bit. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Now the planner deletes points by clicking on the
trash icon on the table. The dive planner is almost
finished. <3
next: add a point from the table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Deletes the logic of divepoints to the model, this
makes automatic updates on the table on deletions.
( remember, to select dive points, ctrl+click on it.
) if you want to delete it, press 'delete', it will
be removed from the graphics part and also from the
table.
Next: delete point by clicking on the table trash-
icon.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The gas choice now works and correctly ( I hope ) calculates
the gas choosen to show on the planner. User can choose the
gas from the list on the visual planner, and also on the table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added support for changing depth and time on the table.
It now works both ways, one can edit the planner via the
table for a fine tuning. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This commit is the start of the Editable Model work
for the planner, it creates a new delegate and shares
the code for the model that creates the gas types, so
we only need to change in one place to add new gases.
The table is already edition-enabled, but the outcome
is still undone, next commit - put all together.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The DownloadDialog behavior was broken in a way it allows the user
to make changes on the dialog while the download is happening.
Also, clicking on "Cancel" breaks/hangs the UI sometimes, as libdivingcomputer
doesn't always cancels the download right away. That's a bug that
still needs to be fixed.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Made the tableviews share a bit of code, and code cleanup.
The tableviews for Cylinders, Weigth and Dive Planner Points
now shares the CSS and I also implemented the save / load
methods for the dive planner points, so the functionality
is mostly done on the vieualization side. - since we are
now using three tables maybe it's a better idea to create
one class SubSurfaceTable that knows how to handle saving
/ loading of the columns... TODO for the future. ;)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'remove' icon on the dive planner table,
this makes the ui more consistent between the other
tables that also manages addition and removal of data.
the delete method is still unimplemented.
next - css.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed moving a dive point between dive points.
this fixes mostly everything that I have broked
by using a Qt Model instead of a linked list -
but a model is better to make everything updated
and only poke in one place. sharing code++. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made possible to add a divepoint between two others,
this also implemented the last patch in the correct way.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed entering a dive stop before another dive stop,
the correct way is to fix the position of them but
this is easyer - I'll update the correct one in
a couple of patches.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The values of the dive points on the tableview were
too big, I'm now dividing time by 60 and depth by 1000
to get the correct results.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a bug where moving a handler would mess the planner
by calculating invalid values to the planner on the model
side.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Moved a lot of code that handled the positioning of the
DiveHandles on the interface to the model. there are a
few bugs left ( regressions ) that I will fix in the
next commits. With this commit an edition of the points
on the widget will trigger a repaint of the planner profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Moving the handler on the graphics updates the model on the planner
Unfortunately, the graphics will move back to it's original
position because of the legacy code used to calculate the
dive plan. Next: fix the legacy code used to calculate the dive plan.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Moved the creation of the data plan point to the model,
this way when the user creates a data point on the
graphical planner, or when the user creates the point
on the QWidget based view, both of them will be updated.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This implementation of the shared model already shares
some, but not all data between the two views, but it's
already a huge improvement. When the user clicks on the
visual planner, it will update the view on the qt-widget
based view. The editing of the view is still not allowed,
and removing nodes is not allowed too ( yet. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Started the model to handle the divepoints between the
Qt Widget interface and the QGraphicsView one. good thing
is that we share code. Bad is that a model is harder to
work, but doable. :)
With this finished ( in a couple of commits ) one can
insert a point on the Qt widget or on the graphics view
and it will be 'mirrored' to both interfaces.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Changed the Window Hint of the planner popup to 'Popup'
this removes ghost items from the task bar.
Hint By: Danilo Cesar
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Removed a bunch of non-used graphics buttons,
since the new widget now contains everything
needed for the creation / cancelation of the
dive plan.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a new widget to control the DivePlanner, now we
have two widgets, a graphics one and a qt sidget based one.
the Technical divers will most likely use the QtWidget one
while the hobbists will most likely use the QGraphicsView
one. there's not a option to choose one, they both will
appear at the same time.
Next step: make the screens to work.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Before this commit this dialog had a weird behavior in which
when it was shown, the whole screen was still active. In case of a
alt+tab, this dialog is sent to behind the application window, but still
visible in the task bar.
This commit basically changes this behavior to a regular pop-up.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Looks like the QTextBrowser can't render the manual correctly.
Also, QWebView provides a better way to find contents on a webpage,
which is an important feature for an user manual (to be implemented).
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
This is a bit of code cleanup that I'm not sure that will
pass, since it's all macro-based, but I don't have a thing
against macros at all. Sometimes they helps us keep a better
and cleaner code base. I think I managed to remove around 120
lines of code, wich isn't much, but I replaced it by 14. and the
code is now easyer to maintain, so hooray.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Change the background color of edited parts of the dive
on the interface. Specially util if you are editing multi
dives in a single step, and went to eat something or did
anything else for five minutes, then come back and don't
quite remember what did you changed. now it's in a cute
yellowish background.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch enables multi dive editing on the selected
dives. It's a bit of big patch where I reworked how it
worked since it was written just for a single dive.
this means that this can introduce bugs - I'v tested it
quite a bit but a thing could slip thru my fingers. :)
How this is supposed to work:
Select a few dives that you want ( one or more ) then
click on the field that you wanna edit / multi edit, and
press 'accept'. *only* the edited field will be modified
thru all dives.
Next patch - I'll change the bg color of the edited fields.A
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes a thing that I run into when trying to implement
the multi-edition system. Whenever a dive was selected, via mouse
or keyboard, it had two stages: first, it would select the previous
and the current ( and thus, render the profile of the current) and
then whould release the previous and select the current again ( and
thus, rerendering the profile again, plus a few other things. )
With the multi-edition system this caused a more severe bug, since
the edition of the dives is directly applied as soon as the text fields
changes, as soon as we selected any dive on the list, the 'before' dive
would be modified by the 'current'. This patch fixes this - but since it's
just a 'code removal' patch, this can led to bad things in the future,
I tested it quite a bit, but didn't found anything, no regression.
*fingers crossed.*
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a bug where the auto-completion would not work via command
line, I fixed it by reloading the information of dives when a
dive file is open via command line or via UI.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added completion for buddy, divemaster, location and suit.
The completions uses some models that I created in the last
commit - everytime that a divelog file is loaded, it creates
a list of completion items.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added classes to handle the completion of dive editions, the
classes are BuddyCompletionModel, DiveMasterCompletionModel,
SuitCompletionModel and LocationCompletionModel, thanks to
plain old C macros, code got really small. and I hope the
logic is better than the Gtk version. :)
Now next step is to integrate it to the Ui. shouldn't be hard.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patches fixes showing back the labels 'Dive master' and 'Buddy'
after a trip selection was done, then back to single dive selection.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch makes the auto editon behave in a better way,
now you can scroll the notes widget without marking it as
editable, and also adds a bit of code cleanup, and a better
logic for editing the other widgets.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This bug manifested itself as too long deco obligation when moving
waypoints to later and then back to earlier times as all intermedite
versions were created as dives in the divelist (and the saturation of
these "previous dives" was taken into account.
It is not entirely clear to me how the dive will be permanently added to
the divelist once ok is pressed: One could in createDecoStops allocate
struct dive from the heap rather than from the stack and return a pointer
to it and which is then added to the dive list upon pressing ok.
[Dirk Hohndel: add include file to make this compile]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current QTextDocument implementation is slow due to
HTML parsing. By using QTableView with QAbstractTableModel
we boost the performance of the table print drastically.
This patch completely replaces the old solution.
There is a hidden QTableView widget which is populated
with all data and rendered using a QPainter attached to
the printer device.
A couple of new classes are added in models.h/cpp
that handle the table print model and these are then used
in printlayout.h/cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QObject::tr() has source string as first argument and disambiguation as
second argument. Currently the events shows "Starts with space!" instead
of " begin" or " end" after the event name.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the tooltip text was used as key in the map, two events of the
same type, close to eachother, would cause one of them to not be
removed.
Since ToolTip::removeToolTip() isn't used, we don't need a QMap and can
use a QList instead, so all tooltips are properly cleared.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the possibility to choose gases in the planner,
now the user should click on the name of the gas, a
popup window will appear, asking the user to choose
what gas he wants for that ascent / descent.
now we need to hook that up with the createDecoStops
method that calculates the decompression.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the current gas used on the planner, now it's a matter
of choosing the new gas, that will be done in the next commit.e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a button and a method to reduce time on the dive
planner. The dive planner will not reduce below deco-time
and it will also not reduce below TIME_INITIAL_MAX.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the code to reduce depth on the planner. Depth
cannot be lower than 40m and it also won't let the
user reduce if there's any point on the 'reduced' area.
the icon is ugly - we need an artist.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Working Press didn't correctly updated when there was a 'bar'
or 'psi' in the string ( and that was defalt behaviour );
The o2 didn't correctly updated when there was a '%' on the string
(and that was default behaviour ),
The He didn't correctly updated when there was a '%' on the string,
and that was also default behavior.
Now all of them correctly updates.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a follow up commit to the previous one that
enabled cancel for cylinders, everything in the commit
log for the cylinders also applyes here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the default 'Cancel' action correctly cancel
the cylinder edition. This is needed only because
we bypassed the default behavior on Qt that took
care of this, because we wanted to have more control
on how the view would update the items accordingly
with wich one of the cylinders were selected
on the edition pane - the pressure and size of the
cylinders needed to have it's data set, but the Qt
Model/View system *thinks* that cancel-edition is
simply 'do not commit the edition data, then.' wich
would not work with us, because we passed the strange
data already. So, I created a backup data that serves
us very well. When the user cancels, this backup data
is added back on the cylinder, making everything as
it was before.
[Dirk Hohndel: removed the inadvertendly added boost header]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the getColor() helper function to
ProfileGraphicsView and EventItem so that retrieving
a certain color can depend on a 'isGrayscale' flag.
This flag is private and only set by
ProfileGraphicsView::setPrintMode() at this point.
EventItem also now accepts 'grayscale' as a constructor
argument.
A couple of side modifications are:
- move setBackgroundBrush() to ProfileGraphicsView::plot()
- set the same pen color as brush color for the dot in the
'!' symbol inside EventItem::EventItem().
TODO: look for color issues when printing using the
custom grayscale table
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We pass the value of 'color_selected' stored in the
print options to ProfileGraphicsView::setPrintMode().
This way the profile can be printed in grayscale
internally instead of converting a QPixmap to
grayscale.
There are a couple of questions here:
1) Are all the 'if/then' checks for all individual
colors faster than the direct QPixmap/QImage grayscale
coversation.
2) The direct grayscale conversation does not give
control of individual colors, but can it look actually
better?
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
(experimental)
Add the method PrintLayout::convertPixmapToGrayscale()
to convert a rendered profile pixmap to grayscale.
It will probably be faster to have
ProfileGraphicsView render in grayscale under certain
conditions (and use a specific color table) instead -
e.g.:
ProfileGraphicsView::setPrintMode(bool printMode,
bool useGrayScale);
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintLayout::printSixDives() goes trough all dives
and prints their profiles on full portrait pages.
This method is based on resizing the ProfileGraphicsView
widget, plotting each dive and then 'grabbing' it using
QPixmap::grabWidget().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When printing the profile there are certain features which
we want different (or disabled). This includes font scale ignoring
and showing a toolip. To achieve that we check for a printMode flag
in ProfileGraphicsView which can be set using setPrintMode(bool).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
There is a potential issue when placing a heading on a new
page. If the height of a data row is larger of that of
a heading, a new heading can end up at the bottom of a page
leaving that page with two headings.
To solve that we add line breaks (<br>) until the new
page is reached and add the heading there. Algorithm
assumes that the height of a heading is larger than
a line break. Also it is now obviously even slower.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
QTextDocument uses a separate painting device,
thus we need to pass our QPrinter instance which may
have a resolution different from the screen resolution.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Don't set the cylinders and weight types if they are
the same than before, this fixes a bad thing that happened
when playing with the values. it could blank out the values
carefully chosen by you.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a linus request, adds a Single-click edition
on the tableview to make it more consistent with the
rest of the interface where edition is permitted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, I used the Qt Event Filter strategy to bypass the normal role
of user interaction, the Qt ComboBox needed 2 keypresses to close
and edit. so I grabbed the first one and send together a second one.
Há.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes the combobox behavior on the inline edit
to what it was ( well, similar to ) the GTK version,
up and arrow keys will walk you to the list of choices,
and it will update the other data as soon as you walks over it
one drawback is that you cant ( for now, since I do have a
very big headache at the moment ) cancel, since the cancel
will just forgets the item and do not call 'setData' on the
model, but we already called it while walking on the list.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Adds spport for key_up and key_down in the combobox
delegates, now when you press key_up or down, it will
show the list of choices instead of going one-by-one
in the lineedit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This modifications makes the About dialog spacing more
consitent with different font sizes. Tested on
Ubuntu 12.04 with the 'Universal Access->Text size'
settings.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It might be a good practice to declare certain class
'helper' functions as constant members. But I don't
think there are performance benefits to that other
than the readability ones.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We use the DiveItem struct from models.h so to ease the
display of date, depth and duration. All columns present
in the GTK build are now displayed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add this helper so that we can easily wrap the required
memory release after calling get_dive_date_string()
(fixes a small memory leak).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Patch does:
- set individual column width and name
(held in tableColumnNames, tableColumnWidths)
- reduce font size in the table
- more small tweaks in the style sheet
TODO: finish printing all dive data
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We don't really need includes of display.h and dive.h in
printoptions.h and printlayout.h or forward declartions
of 'struct dive' and 'struct options' in there.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
also includes:
- experiment with colored background for headings
- experiment with 'left' alignment for headings
('th' tag CSS does not support 'text-align')
- whitespace fixes
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Currently only for the table print, but now we use the
actual dive table to iterate trough all dives (find only
selected if needed) and print their 'number' element
in table rows.
Also improves the new-page detection algorithm slightly.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintLayout for now only handles the table print,
while the data output itself is work in progress.
For now there is a simple HTML/CSS table logic based
on QTextDocument. There is an iterative algorithm
which listens for a page increase and adds a heading
on top of the new page.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Use a QPrintPreviewDialog, while the print logic is WIP.
This way Qt will show the print output in a window instead
of exporting to a file and opending it manualy.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The setup() method will be called each time to obtain the
current printer settings. Also it calculates required scalling
based on screen agains printer DPI.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintLayout is a class that will handle the layouting part
of dive profiles, text, tables depending on the settings
of a QPrinter and the PrinterDialog and PrintOptions
instances.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
By connecting to slots we always modify values at a previously
set 'struct options' pointer.
Also have the setup of slots and pre-set values in a
separate setup(struct options *) function.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Tab order should begin from the topmost widget and then
descend towards the bottom end of the dialog.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The PrintOptions widget has value labels next to the
horizontal sliders. Add slots to update these labels
when a slider moves.
Patch also makes a modification so that the PrintOptions
constructor requires a 'struct options' pointer. If
an options struct is not received we do not set predefined
values and do not connect signals to slots, where
options will be updated immediately.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- adds missing file printoptions.ui
- adds all controls present in the GTK version of the
print dialog custom tab
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintOptions is a QWidget class to be used as an
addition to a future print dialog (possibly based on
QPrintDialog). Currently only contains a couple of
radio buttons.
PrintDialog (printdialog.cpp/h) which is a basic QDialog
is currently added for testing only and it holds
an instance of PrintOptions.
Calling File->Print opens this test dialog for now.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
While in zoomed mode and when resizing the splitters or
switching views the profile tooltip can end up being at the
wrong location and also the zoom state becomes corrupt,
so perhaps the entire transformation needs to be reset.
To prevent the bug we listen for relevent to the profile
splitter resize event, view changes and clear()/plot() the
entire profile graphics.
This is an slow/expensive solution and perhaps there are
cheaper alternatives e.g. updating only the scene rectangle
and tooltip, somehow.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove a couple of expand() calls(?). Also store the last
expanded rectangle size in the private variable nextRectangle
and use that in collapse() animation. Patch prevents a small
jump/resize glitch if the user quickly hovers over and out
of the profile while the tooltip is still resizing.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When collapsing the tooltip we want it's border to become
the same height as when no tooltip info was visible - i.e. post
creation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So during my Maui trip, I had a short hiatus in diving, causing
subsurface to start a new trip for the last day of diving. I could have
just started the old gtk branch to fix it up, but decided that I might
as well try to implement the "merge trip" logic in the Qt branch instead.
This is the end result of that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QGraphicsView::AnchorUnderMouse does not work for
Qt 4.8.1 on Ubuntu 12.04 and if the mouseMoveEvent
overload is disabled it practically can be seen that
the anchor point is [0, 0] instead of the mouse location.
After a suggestion found on the web this patch attempts
to use the hidden scroll bars to calculate reposition
on pan and zoom *near the mouse cursor.
On the other hand QAbstactSlider (QScrollBar) class
strangly uses negative offsets for minimum scroll
position, which makes the implementation even more
ugly.
[*near] because it's not that accurate!
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makes it easier to see colored lines - e.g. velocity
with 20 levels of zoom.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The 'else if' condition in ProfileGraphicsView::wheelEvent()
is causing a zoom-in / zoom-out loop at zoomLevel = 10.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a messageBox to warn the user that he quit with a working
plan, to reduce the risk of unwanted loss of work.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the left / right shortcuts for moving the handlers around in time,
this also made me wonder why we have the 'previous dc' on the menu, it
got actually to broke my code on the shortcuts for the planner because
they are active everytime - should they be active only when the profile's
visible or they serve any other purpose?
If they serve only for the profile, I'll get them out of the menu and
put them in their proper place - the profile view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added 'up' and 'down' keyboard actions on the dive planner,
you need to select the handlers with ctrl + click, then
press up to make the handler go 1m up, or down, to make the
handler go 1m down.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a delete action from the keyboard, there's also
a possibility to add the same action from the menu, but
I frankly don't like much the idea. so, to delete a handler
now, you need to select it ( ctrl + click ) then press
the delete button. Multiple delection is also possible.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a shortcut to the esc key, so it clears the selection,
if there's no selection, it acts just like clicking on the 'cancel'
button. Next: delete selected handlers.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make possible to select an handler by ctrl+click on it,
this will be used in the future for the shortcut actions,
like delete, arrow keys, and such.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, it was on the docs, but I didn't read it before, if the
scene has items that ignores transformations, we need to
pass the view transform to the method that gets the items
in the scene. I also used IntersectsItemBoundingRect instead
of IntersectsItemsShape because it's faster, and our items
are small, so we don't need an very accurate but slower method.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make it possible to drag a handle between handlers,
this way the configuration of the dive is more acurate
and easyer to make. I'v discovered a problem where it's
a bit hard to 'grab' the handler, investigating it now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make it possible to add a handler between others,
someone asked why I didn't make like this from the
beginning, the answer is that I wanted to have something
stable before messing a bit more with the planner, but
since the planer is almost-stable, I added. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Better positioning of buttons on the dive planner. The ok / cancel
buttons are in the correct place, and the '+' sign for time will not
overlap the time string anymore.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
To draw the white outline around profile text we trace a text path
using QPainterPath::addText() and then create a couple of
QGraphicsPathItem objects. One of the objects is outlined using
QPainterPathStroker and is placed at the bottom of a QGraphicsItemGroup
with a white brush. The other object holds the standard colored text
and is placed on top.
Notes:
- possibly quite expensive on older machines
- ProfileGraphicsView::plot_text() now returns a QGraphicsItemGroup
- QGraphicsSimpleTextItem uses a top-left baseline anchor
while QPainterPath::addText() uses a bottom-left baseline
which is a bit mysterious, requires the -3 offset for a match
and is possibly non-portable across fonts and sizes.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makes the increase time button to work, it will
increase the minimum time, not the correct time of the
dive. the total time is calculated by the deco, and
does not come from this, unless the deco is smaller
than the minimum time.
This patch also fixes the problem where a button
would only click once - I was holding the first
clicked button as the 'mouse grabber', bad tomaz.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make the increase depth button to work, it also adds
a 'safety' stop at 150m, I know that this is deep, and
maybe we need to adjust this to a better safety stop.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Removed the user-entered lines on the plan, keeping only deco,
This way the graph looks way prettier and we don't loose any
functionality.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Change the color of the DepthString based on it's deepness
on the profile planner. The new color of the profileString
( the string that follows the mouse stating how deep you are)
is now interpolated from SAMPLE_SHALLOW and SAMPLE_DEEP -
but since those two colors were the same and I had to change
it so that could work, I want somebody to check if my choose
of colors were ok.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Use the same profile colors on the planner for the Time and Depth
rulers. this needed a new method on the rulers - setColor, that
will call the setPen method and make everything behave properly.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The last tick to the rulers were missing, this was making
them to look odd, this make the rulers better looking,
but it caused the other-non-ported-yet-to-percent stuff
to behave in a not so good way, most visible one is the
handlers, gonna update them next.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Changed the ruler so that they work with percentages,
also added a new method to the rules to set the size of the
ticks.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a method and a simple stub to position things on the canvas
using percentage - this way I have a proper control on where I want
to put things on screen and it will make simpler for future changes,
even if the amount of code written is a bit bigger.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Share the background for profile and planner. Those are not the same
class, but they should behave somwheat the same.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added 2 new files, graphicsview-common.h/cpp, that should have
the common stuff shared between the dive profile viewer and
the dive planner. the amount of duplicated code would be huge
if we go the road of two different classes for each one, but
since the planner took a more 'Qtish' way of behavior, in
comparisson to the profile - that's most a Cairo-To-Qt literal
translation, we cant easily merge the code without a complete
( and unwanted ) reestruturation of the profile code, thus,
this new files will serve as a bridge between them. Initially
I put there only the colors - since that's wat most easilyy
shareable.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Goal: no blending between profile text and graph lines
Qt doesn't seem to provide an easy-to-go solution in terms
of styling the z-order of the pen and brush layers of a
QAbstractGraphicsShapeItem (or alternatively pen offset),
which is needed if for example one likes the pen not
to cover the text fill.
Calling QGraphicsSimpleTextItem->setPen() on small text can
cover bigger portions of the text, as the pen ends on top of the
fill and given the pen stroke path ends up scaling exactly
at the fill path border but not on the outside, for example.
Since we don't get quick control over that (and to avoid
the issue in a naive way), we set the text as bold
and the white outline lands over the "bold-ed" area of glyphs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In certain conditions a number such as '51' could end up being
partially hidden under the white bounding box in such a way
that the digit '1' is barely visible. Putting the bounding
box bellow all plot data solves the issue.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While most dialogs can be open and the main application window
can still be accessed, certain should possibly be modal
in these terms.
This patch proposes the download from webservice and DC dialogs
to lock the main application window until they are closed, with
the consideration of preventing eventual unexpected behavior
in the divelist if both dialogs are active at the same time.
To solve that QtDialog::exec() is used instead of
QtWidget::show().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most child windows should be closed with the main application
window otherwise if left open and if making specific
modifictions could potentially cause a SIGSEGV.
To solve that we mark all custom windows/dialogs with
the Qt::WA_QuitOnClose attribute on instance creation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the ok / cancel buttons on the dive planner canvas.
I still need to hook the esc button to cancel it too, but
since I removed the 'floating dialog' option and merged it
into the mainwindow, it's necessary.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Now, activating the dive planner will hide the profile
and show the planner on the same place. we still need
a way to 'cancel' or 'accept' the profile created.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
We always resize if the dive is longer than the current scale allows, but
we don't shrink it overly aggressively and we never shrink it below the
initial size.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Prior to this change the visual feedback (the handle that is drawn when
the user moves the mouse while pressing the left mouse button) would not
move to an illegal position (one that is impossible without time
travel), but it the user moved the mouse to such an illegal position and
then released the mouse button, we still added that illegal position to
the plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove a couple of TextLabel text entries from maintab.ui
which can be seen right after program start and if no dives
are present.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Make a call mark_divelist_changed(TRUE) when the user adds new
cylinder or weight entries.
2) Call mark_divelist_changed(FALSE) in
MainWindow::on_actionClose_triggered() so that each time after
a file is closed or a new one is created it does not ask immediately
the user for a save confirmation for the blank file/divelist.
3) Call mark_divelist_changed(TRUE) once a dive's geo location
has changed in GlobeGPS::changeDiveGeoPosition().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are a couple of problems with said icons:
- When the Equip. tab is first seen, no relative event is monitored
so that the correct position is updated and the icons are positioned.
To solve that we connect the signal MainTab::currentChanged(int)
and call MainTab::equipmentPlusUpdate().
- When the info-profile QSplitter resizes with a snap towards/from
the edges of the main window, no resize handler is called such as
MainTab::resizeEvent().
A solution is to monitor the resize of the info-profile splitter
with MainWindow::on_infoProfileSplitter_splitterMoved() and again
call MainTab::equipmentPlusUpdate()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove circle in plan by starting the first line at the first point
rather than the last.
In addition marks all entered points as entered and not just the first and
sets line color accordingly.
Makes plan_add_segment return the added data point.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes most of the issues with the dive planner,
The lines are removed when the drag starts, and
it's repopulated after. The time ruler updates
itself with the biggest time in the dive (I'll
add later the code to keep a minimum of 60 minutes,
and increase by 15 to 15 minutes, but for now
this will work ), Removed the code to do
line manipulation while we are moving handlers
around ( because it could trigger ruler-expansion,
that woul'd move everything, and that's not nice.
This showed that something bogus is going on with
the decompression algorithm - I don't know if it's
on the data or on the algorithm itself, but it's
creating a ring with the lines on the canvas
I painted all decompression-algorithm based lines
red so it's easier to spot where the hell things
got wrong.
midnight, sleepy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
If a file has been opened from the command line or via the File
menu the main window title becomes "Subsurface: filename.ext".
Title also updates if 'File->Save As' is called. "Subsurface" only
is displayed when no active file is present or post 'File->New'
or 'File->Close'.
To make this work a new public method is added - MainWindow::setTitle()
and also an enum type MainWindowTitleFormat, which should allow
more complicated formatting, such as showing the selected dives
or the total number of dives (e.g. MWTF_FILENAME_N_DIVES).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use Ctrl+1 for 'View All', while all the singular views follow
with Ctrl+2..5.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For viewing the Globe section (pane) we need to collapse
both the 'list' and the 'main' splitters.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
File->New in the GTK version performed the same as File->Close.
Creating a new file may also ask the user if the current file has
to be saved.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Similar to File->Open but for multiple files and without
calling on_actionClose_triggered().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the bogus time/depth that was duplicated in the
Handler - dirk didn't realized that I already created the
same data that he put on it later, but mine was double and
his his was int, I choosed his implementation since he knows
a bit more than I do about subsurface internals.
Besides that, I worked a bit on the logic that called update ticks,
because it was calling it for every mouseMoveEvent, it created
sooooo many ticks that it made the app unusable ( and slow. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This behaves somewhat differently from the Gtk version - still needs
more investigation. But at least now it's hooked in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog is similar to the one in the GTK version
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses a bunch of default values that we eventually need to get from
the UI, but it's a first step towards a working dive planner.
This exhibits some graphical artifacts when running, but other than that
appears to be mostly correct.
Things go far worse if I enable the changing of the scale once the deco
makes the dive longer than the displayed time window. Things quickly
spiral out of control.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I expanded the DiveHandler to include the actual time / depth of each
node on the graph - this way things will stay consistent if we need to
rescale the graph.
One thing that this makes obvious is that the whole design for the
planner so far assumes metric data. We need to make sure this works well
with feet instead of meters as well (and that it uses the information in
the units settings).
With this change we actually create a dive based on the plan input and
add the deco stops (if needed) to it - but we don't do anything with the
results of those calculations, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This looks much more natural than truncating the values. Now the displayed
numbers correspond to the "snap" behavior of the handles.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the correct way to add the ticks (and gets rid of two warnings).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just to keep me sane.
The code still shows compile time warnings which are the areas where we
need to complete things to actually do the deco calculations, etc. But now
seemed a good time to merge it into master as hopefully more people can
contribute.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the skeleton implementation of the increaseTime and
increaseDepth methods - they will increase the time / depth by
10 units ( feets / minutes ) each time they are clicked.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a new class, named Button, that has a clicked() signal,
and can be connected to the view to emulate buttons. While
I know that Qt supports widgets on canvas - I think it's too
nineties to have such square controls on something that can have
rounded borders.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make the plot and the handle stick to a grid, the
grid is defined by the integers in the rulers, so
a time of 10,2 is converted to 10, and will put the
point at 10.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch makes the depth to show only integers, as
dirk asked. I'v also added a 'm' at the end, I know that
this will need to be taken from the settings but
i feel lazy today =p
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch makes the first line and the last line of the plot
inside of the boundingRect defined by the timeLine and depthLine
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch makes the behavior of inserting new hanflers
correct. it can only be inserted now inside of the plane
defined by the Depth ruler and Time ruler.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created the posAtValue method for the ruler, you enter
a value, and it will return the coordinates in double
( coordinate system of a QGraphicsScene is double based )
this is not the best name for the function, but I couldn't
find any better suitable name.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a new class named DivePlanner that is a QDialog,
and renamed the old DivePlanner class to DivePlannerGraphics.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a skeleton of 'create_deco_stop' plus a bit of
code cleanup. I'v commented the create_deco_stop so that
the other developers can help me a bit here - since I don't
know too well the internals of subsurface. In the original
GTK code - a new dive was created every time a user changed
something on the dive, I don't know if this will be needed,
I jusst need two things: the correct time of dive calculated
by the app, and the points to put the decompression lines.
The usability of the widget right now is 'ok', nothing to
be proud of, it's ugly as hell too, and the Rules are in
the wrong position ( they are 'inside' the area where
the lines are being drawn, but htis is easily fixable. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added text to the rules, so the user knows what's happening at that point
The text will move left / right ( for time ) and up / down ( for depth )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the code to set the Depth / Time on the user handlers,
I think this finishes the difficult part. ( well, not really )
the depth and time is being set when handler is added or moved,
but as soon as the deco calculations enters on the code, the
handlers will need to be repositioned - and this code is not ready
yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The ruler items are needed so I can get the correct
coordinates of the planned dive. This is a very
rudimentary ruler and it needs a bit of love, but
it already gives me something to work on.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The ruler will deliver the Time and the Depth, later.
it should be vertical or horizontal, and will have
ticks
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch disables the hability to move handlers across
the others, making a 'zigzag' in the time line.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added drag and drop code to the dive plan, it can move the user-
inputted data, but will not touch the computer generated ones.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Create d a class DiveHandle to make drag drop works,
it has a from and to Lines, and it will move them
around.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make the cross red when you cant plot a dive stop,
also make impossible to put a dive stop before the last one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch makes it impossible to create a dive stop
outside of the scene - this, messing the complete
planning system.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a cross that follows the mouse on the dive planner,
this will help the user to know where it is placing the stop.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This fixes the creation of the poligon-based lines
next thing to do is to forbit creation of the next point
before the last one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Better handling of the scene size for the dive plan,
The scene can be resized and a transform will be applied,
the handles will not resize however - they are 10x10px
and that's it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is still a bit bugged - the lines are going to the wrong
end - most probaly I messed something on the math. I'll now fix
the sizing issue then I'll try to make it behave in the proper
way.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make double click work to put new items on the canvas.
Those items right now are QGraphicsEllipseItems, but
it will change to 'draggable' items.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the first files and skeleton code for the visual
dive planner. now I need to fill things. The code is
using the print action borrowed, this will need to move
to a better choice in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
If we don't have any manually set pressure data, show the data from the
samples instead. It uses an italic font for this case, mainly because I
couldn't figure out how to gray things out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's just distracting. Leave it empty. No helium should be visually
very different from actual trimix, and for oxygen, zero means something
different anyway (it's air). In neither case is '0.0%' a good string to
show, just show it as empty.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes us use the same linear calculations as we did in the Gtk
branch. We don't take compressibility into account, since tank
manufacturers don't seem to either. A Luxfer AL80 is 11.1 liters, and
with the standard (non-compressibility) calculations, 80 cuft of air at
3000 psi is 11.094 liter, so that is the right model to use.
Also, stop with the horrible "units in edited numbers" stuff. It uses
up precious space, and doesn't look any better. If the user asked for
cuft, give him cuft without making a big deal about it.
Oh, and if the working pressure doesn't exist, sizes are always in
liters. That's what we did in the Gtk branch, that's what we do here.
Again, no reason to even bother stating units, it's not helping.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do gas mixes in permille, not in percent. Some people really like
using the value they got from the analyzer, which is generally something
like 29.4% or whatever. So don't truncate percentages to integers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since no one else approximates gas volumes at higher pressures, we
shouldn't do that either when converting imperial tank names (cuft @
working pressure) into wet volumes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't even begin to explain what got me to write this in the first
place. It makes no sense from any angle I look at it...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the entries for years bold, keep the months non-bold.
It's still a sea of data, but this is an improvement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit fixes two issues. One is that there were situations where
the code would read an uninitialized parent pointer, the second was that
instead of the monthly statistics the tree view would show the yearly
statistics again under the yearly entries.
I assume that the second part of the fix (initializing the parent
pointers) actually takes care of both of them (that patch was suggested
by Tomaz), but the first part that just makes sure the pointer is at
least initialized to NULL seems to be at least not harmful, so I kept it
as well.
With this the yearly / monthly statistics seem to be pretty much at
feature parity.
Fixes: #115
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Display the units in the header, make the header more consistent
looking, convert the values into the right units with appropriate
precision.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This data structure was quite fragile and made 'undo' when editing
rather hard to implement. So instead I decided to turn this into a
QMultiMap which seemed like the ideal data structure for it.
This map holds all the dive computer related data indexed by the model. As
QMultiMap it allows multiple entries per key (model string) and
disambiguates between them with the deviceId.
This commit turned out much larger than I wanted. But I didn't manage to
find a clean way to break it up and make the pieces make sense.
So this brings back the Ok / Cancel button for the dive computer edit
dialog. And it makes those two buttons actually do the right thing (which
is what started this whole process). For this to work we simply copy the
map to a working copy and do all edits on that one - and then copy that
over the 'real' map when we accept the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yearly stats are being displayed. the code is similar to the GTK one,
but I advise the reader that it's a bit risky ( I got an unreproducible
crash but it seems to be fixed now. ). The selection behavior is *weird*
and I have no idea why, but I'm very sleepy - will try to look at
it again tomorrow.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This simply creates a view to show the model, while doing that
I noticed that the model header wasn't showing, so I fixed it too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is the fisrt bunch of compilable code for the new Yearly Statistics
there's nothing to see here, move along...
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, I changed a lot of code to reduce boilerplate on models in the
future. Currently we do not have a lot of models, but this can increase
quite rapdly. There's a second TreeModel in the works, the Yearly
Statistics, this patch will save around 250 LOC for this new model,
and more and more models will give us a greater saving.
Iwll do that for the table models in the future too - I did the tree
models now because they are the most complex case and I didn't wanted
to create a second tree model without this.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This code adds a Renumber Dialog, that's most a copy & paste
of the GTK visual, I didn't tried to do anything fance with it,
but I still dont like how it looks like. a better management
form is needed. :)
( Well, actually my dislike is mostly because it's on a menu
and it's on a popup, I think a 'toolbox' should exist to hold
all of those widgets that don't belong to the menu - will try
that later )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The old gtk branch started out with device_data_t explicitly cleared,
but the Qt version never did that. And we actually depend on the
deviceid in particular being initialized to zero (and then we fill in
the details in the divecomputer download callbacks)
Not properly initializing it meant that we ended up with random
deviceid's that got added to the divecomputer device lists, and then
saved to the XML file without actually matching the data in the dive
computers in the actual *dives*.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch saves / restores the sizes of the columns in the cylinders
and weigth table widgets, so everything is now properly behaved. There
's still other things to do - but I'm tired. i's sunday and there's a
protest against the brazilian government to go.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Removed the grid lines of the table views, this makes the table view
more similar with the dive list - I'm searching for an application
identity here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Remove the vertical header on the cylinder and weigth edit,
It was strange to show, since we don't show a thing there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make the columns on Cylinders edit and Wheight Edit to
have sane values for 'type', this is needed because the
old behavior was to set it fixed size, and the default fixed
size was silly. this calculates a good predefined value
taking the font size in consideration.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Better handling of default sizes on the Cylinder and weight widgets,
the weigth widget didn't had a CSS applied so it looked odd compared
to the cylinder one, also the default behavior for the combobox delegate
didn't worked very well with the css applied, being too small.
this patch fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The models were a bit messy - some of them got the correct font,
other didnt. This patch creates a new function 'defaultModelFont()'
that is being used to return the font in all cases now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch creates a ComboBoxDelegate where the other specific delegates
should inherit from. this adds a little code cleanup for the current
version, and will help as soon as more delegates got added to the code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Qt branch didn't set the preexisting dive count, so matching old
dives didn't work and it always downloaded all of them.
Also, we need to autogroup dives before displaying them if autogrouping
is on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While we still show the selected_dive in the profile and use it for Dive
Info and Equipment, in the Dive Notes tab we now show the trip location
and trip notes (and none of the other fields), if the user directly
selects a whole trip by clicking on the trip header.
This clever reuse of the widget now allows trip location and notes to be
edited in place.
As a side note: the Gtk version has long allowed the user to edit the
trip location and trip notes, but nowhere did it ever SHOW the trip
notes... so this is more than just feature parity...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons I still don't understand, sometimes (but not always) when
clicking on a trip header we appear to get a select notification for the
trip and at the same time deselect notifications for every dive in the
trip. This seems wrong but I can't seem to figure out why it happens -
and of course it causes us to have a mixed up interpretation of what is
selected in our internal selection tracking.
Simply acting on the new selection after the newly deselected items are
handled appears to fix the issue, but I do worry about this change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixed the show / hide dialog shortcuts to take the splitter into consideration,
So, here's the deal.
We have a few QSplitters that takes care of helping us with the
size of a few widgets, they are ok, and we should continue using them
to manage the visibility of them too. But the way that we did before was to
widget->hide(); something, and if you hided something using the splitter,
by holding it's handle and collapsing the widget, then you used the 'ctrl+number'
shortcut to show it, it whould only show a gray panel.
This patch makes everything behave using the splitters.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
For consistency I didn't change the meaning of Ctrl-1/2/3/4 and added
this as Ctrl-5 - but one could just as easily make the argument that
"ViewGlobe" should be Ctrl-4 and "ViewAll" should be Ctrl-5.
This ensures that only one of the four widgets is shown in the
individual modes, but it doesn't address the drawing issues with the
profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do a force-plot on showEvent because the user can
have asked to open a dive file via command line, so
the app needs to open already with a profile plotted.
if the user opens the program, loads a map, hides
the profile by hitting ctrl + 1, then shows the
profile again by hitting ctrl + 2, we do not want
to do all the math to show the profile again, because
we already have it in memory.
this also fixes dirk's strange behavior of funky profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Implements the divelist to behave like linus explained,
essentially, it filters the layoutChanges of the model,
greps for trips, and for each trip that it finds, it set
the 'firstColumnSpanned' property, to make the column
to have the size of the whole table. e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The title of the form to download dives from a computer was
simply "Form".
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a simple TextEditor in the graph for the 'Dive Plan' mode,
this text editor is very simple, so the user can double click on
'depth' or 'duration' to set the depth or duration of the dive.
Since this was a test, only 'duration' was done, and I'll add
duration on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'Plan' mode and a 'Dive' mode on the profile. Those modes
tell the application what can be done: Plan - the dive's dinamyc and
can be changed, 'Dive', the dive is fixed ( most probably downloaded
from a dive computer and it's readonly. ) - now I need to properly
populate stuff.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch adds a dive from the menu, it's the dive that will
be used to add a new dive plan. so, I also removed the option
'add imput plan' from the menu.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Reimplement the movement of the tooltip by hand,
we were adding / removing childs of the tooltip
quite often, wich broke the movement of the item
using the default behavior, aparently Qt uses
a cache of the transformation of the item, assuming
that the bounding box of it will not get modified
while dragging. wich in our particular case, is
a falacy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ticket 127 mention that context menu is fixed on imperial mode, which is
partial true. Context menu only not have the changes on header model updated
when preferences are chenges during execution. Hard to note because if
program is closed and opened again, the context is initialized properly.
Since actions aren't bound to the header model, we need iteract of current
items and change the title.
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
We need to close the dialog after applying what was downloaded, and we
should not try to delete the manager in case of cancel (as that reliably
causes the SIGSEGV.
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ok, so this sounds insane, but it fixes our currently broken sorting
of dive trips vs plain dives not in trips.
The reason for that is simple: the dive trips are sorted by date, but
that's column #0, and for plain dives is the dive number.
So currently the trip-vs-dive sorting looks at the date of the trip,
and compares that to the number of the dive. Since the date of the
trip is expressed as seconds-since-1970-in-UTC, unsurprisingly the
dive number is generally much smaller (even for some very avid divers
;), and so the plain dives end up sorting way at the bottom (or at the
top, if you do "oldest trips first"
Since the dive number *should* sort as the date, this stupid attached
patch just makes us return the dive date instead.
Now, there are other possible solutions to this:
- make the date of the dive be column 0, and make the dive number be column 1.
Quite frankly, while more logical for this particular problem, it
probably sucks as a solution. We do want to have a column we can sort
dives by that is date-based, but doesn't include trips. And while the
dive number *should* sort identically to the date one, the fact is
that you can have dives without any numbering, so it doesn't.
In contrast, all dives have dates, and sorting numbered dives by
date should still result in sane behavior (and if it doesn't, then the
insanity comes from the dive numbering, and odd sorting is the fault
of the user and indicative of a problem)
- We could possibly do something magical like sorting dives by number
when they are inside trips, or when no trips exist at all. But then
we'd sort by date when there are trips and the dive is outside the
trip. But quite frankly, that just sounds insane.
So on the whole, I don't love this patch, but it seems to be the least
confusing of the possibilities.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a typedef to the QFlags<QItemSelectionModel::SelectionFlag>.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit c4f06dc536 introduced Document
Mode on the MainTab QTabWidget. This doesn't look good on MacOSX.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the map selection works like normal selections do. Except we
don't do "ranged" selections (shift-click) for fairly obvious reasons.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Proper hide/show tooltip under ProfileGraphicsView. Events are not
properly handled and no custom tolltip status was stored.
Text are properly hidden now when tooltip is collapsed.
Reported-by: Tomaz Canabrava
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Last open dives directory is stored in settings, so no need to walk through all
subdirectories all the time.
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
This code removes the dive computer clicking on the trash icon,
the result is not saved on the XML, this will need a bit of
hacking from some of the older guys. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The GTK version seems to be bugged on this, since the dialog
doesn't save the dive computer nickname that I setted, but
the Qt version shows less dive-computers than the GTK one on the
same dive. I want somebody to do a quick review of my code too. :)
I also plan to remove the 'OK' and 'Cancel' buttom, they seem to
be overrated on this dialog - fairly uneeded.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a new dialog, Edit Divecomputer, it will currently only lists
the divecomputers that are used on the xml file. I used the same method
that the gtk version used, but only 2 divecomputers got visualized in the
dirk dive data. I'll assume that it's correct and will fix it in the next
couple of commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I guess we should support de-selecting dives this way too, but right now
the interfaces only do selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 4b405caa2c ("Clean up divelist dive selection") made the sort
model variable in headerClicked unused, so get rid of it. Fix a speling
eror closeby while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hoocked up the apply button - Didn't tested ( as I frankly don't know
what the expected result should be. ). but the app is not crashing, yey.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The XML is now being correctly parsed, Clicking on Help
will open the browser pointing to the api site, and clicking
on cancel will cancel the download.
Clicking on Apply still doesn't apply, but that's next. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added initial support for download dive info from subsurface web service,
the current code only downloads and output the xml downloaded in the debug
area. Now I need to parse things up and plug the unplugged stuff.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Don't call refreshDisplay() after preferences change. This strangely
somehow leads to a situation where I need to move the mouse over the dive
list before changes to the units are reflected.
When calling reload() do not force layout change / resort unless that is
the intention.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Getting closer to the way this should work. Adjusted the call to reload
to not switch back to tree view and resort (oops).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems that this is the way this is supposed to be done - instead of
manually looking at what kind of click we get, Qt decides when to create
a context menu for us - this way things like the Windows Menu button
will work automagically.
As an example I also implemented the "remove dive from trip"
functionality, which exposes some other bugs (like the fact that the
dive that isn't part of a trip ends up being sorted at the very end of
the dive list).
This commit contains a "testSlot" implementation to remind me how to
figure out which dive / trip we are on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some users might want to really see nothing but trips, others might want
to be able to keep the trip with the selected dive open.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we support "expand all" and "collapse" all. This still needs to
be restricted to only be shown when in trip / tree mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have a "selectDive()" method, let's just use it rather than
opencoding it. Similarly for "unselectDives()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These changes should be correct - but they still don't fix the problem
that after we click 'OK' on the preferences (regardless of whether any
changes were made), the first dive is set as current dive and shown in the
map window.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We'll want to enhance this: better logic for which dives are near the
selection, and it's probably best to have a "control-click" that adds
the dives to the selection rather than deselecting all the old ones.
But it's already useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not showing them at all was a little too blunt of an instrument. There
likely are dive spots with the same name at different resorts. And even
at the same resort you could have multiple morings for the same dive
site.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The check to only update the dive if there were already dives selected
before seems bogus. I'm sure I put it there for a reason but it seems
flat out wrong.
This gets triggered when you select a trip by clicking on the trip
header. In that case all dives get unselected (amount_selected = 0) and
then we try to select the first dive in the trip - which fails because
of this check.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a new widget, MinMaxAvgWidget, a simple widget
that displays values in 'min, max, avg' fashion.
it has a setMaximum, setAverage and setMinimum
methods, that is userful for setting the minimum,
maximum and average of stuff. Ah, it also shows
the minimum, maximum and average of things.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This function was supposed to take the default_prefs into account but
clearly wasn't.
Now it should be much more readable and maintainable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This helper wasn't called as intended - but because of the syncSettings
call which emits settingsChanged this only became visible for the
default_filename.
Next I need to clean up what is called for the settingsChanged signal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Things got broken. Again. We no longer kept track of the selected dives in
our structures which broke statistics.
This attempts to fix that, but appears to still have a bug when selecting
trips. Sometimes this results in 0 dives being selected according to our
data structures, while Qt happily shows all dives of the trip as seected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code so far had completely ignored Metric / Imperial. Turning this
into a three way radio box seemed to make much more sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a feature that had been requested a few times in the past and when
debugging my "show only used gases" commit I realized that this would have
been extremely useful to have...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The keyboard movement wouldn't scroll to the newly changed selection.
Similarly, when sorting the dive list, we'd end up losing the currently
selected dive (and generally collapsing the currently exposed trips).
This adds the scrolling/exposing logic for those cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hardcoded position we previously had would make the text invisible
if a ceiling was drawn during the middle of the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The equipment tab will still show all defined gases, but the info for
the dive should only list the ones used.
Also change the name of the two gas related boxes to better reflect the
data that is shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply renaming all the elements with name conflict. None of these names
appear to be referenced anywhere so this seems like a rather odd thing to
happen - why doesn't the tool just rename them for me when I open and
close the file in designer? Or at least warn about it?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a helper function to determine the Subsurface data directory
(are we running from build directory? installed on Linux? installed on
Mac? - still need to add support for Windows). This same function is
then used by both the setup for Marble and for the help browser.
This assumes that the user-manual.html file has actually been built and
installed (which we don't do by default with the current Makefile).
Right now there are rendering issues with our manual in the help browser
widget - I'm sure this can be fixed...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a preliminary support for a manual display widget,
it's a very basic HTML text-browser, so it can have
hyperlinks, images and everything that a 1995 browser
has.
The long term plan is to subsittute this manual by
a more modern 'help' using QGraphicsView, that will
interact on the application level.
See #121
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
In commit b8d31d8534b ("Show ceilings for individual tissues") Robert
inadvertently broke the connection from dc_ceilings to red_ceilings and
also didn't correctly enable the checkbox for all_tissues when
calc_ceilings was already set in the preferences before the dialog was
created (and therefore the connection in the .ui file isn't run).
There's also a simplification / cleanup to the code deciding whether to
show all the tissues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think that displaying tissue loadings either as pressure or as
percentages is not very intuitive but that it makes much more sense when
translated to ceiling depths.
This change enables just that for the 16 tissues in our calculated ceiling
and visualizes this in the profile graph.
There is a checkbox in the preferences to turn this on. If enabled, all
tissues having non-trivial ceilings are also shown in the info box.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since I already put the center-allign label on the interface designer,
this was just dead code. getting rid of it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This moves the contents of the statistics tab to groupboxes,
so it's similar to what we had in GTK, but a bit prettier.
it's not what I plan to do in the final form, since I think
that a few 'min max avg' can be in it's own widget ( and maybe
a cute graph showing the values would also be nice. ) but its
an improvement from what we had.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
There was already a code for that on the maintab.cpp, but
since I moved all labels to groupboxes, the code stopped
working, and I tougth it'd better to kill the code since
it's faster and safer to use the interface builder for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a redesign-tryout of the info panel, it's not the way
that I want to do, actually - I think that textual representations
are quite boring, and we can do much better if we use better widgets,
for instance, a Calendar to show the date, a Termometer to show
the temperatures and so on. This version has a fixed layout, but
I'll most probably try to make it more dynamic in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Press CTRL+F and a line edit will appear, whenever you write on that will
be used as a filter against all columns. The results are maybe somewhat
surprising in trip mode, but when sorting by another column this shows
some potential.
Hit ESC to remove the filtering.
I need to find a better position to put the Widget, but it's a proof of
concept.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This small patch enable maintab to be in 'Document Mode', this means
basically that it size is smaller and there's not a line separating
the widget anymore, giving the user a more smooth experience.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Following Dirk's commit ae2c132, add support for custom google sat
data in a MacOSX app bundle
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The download already worked, but we didn't display the new dives. This
introduces a new slot for MainWindow that updates what is displayed in
Subsurface after files were imported.
With this change we can successfully download ONCE - but when trying to
download a second dive the dialog doesn't appear to get refreshed the
right way - the OK button doesn't appear to work anymore (Cancel however
does).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First try if Google Sat is already installed as a provider (and just use
it if it is). Then use the executable path to make an educated guess where
these files might be found as part of Subsurface.
We now install the necessary directory tree under
$(DESTDIR)/usr/share/subsurface/marbledata
Still far from perfect - but this should work at least on Linux. MacOS
will need a different modifier for the path and Windows I haven't even
thought about, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When (de)selecting columns, a the list of columns have a "show"
in front of every entry. We don't need that.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit beb4ed38f264 ("Add a "sort role" for sorting the dive list")
Linus forgot to add a case for the rating value.
Now all columns sort correctly.
With this I think we can close the bug...
Fixes#111
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tomaz convinced me (with help from Linus) that it might be a good idea
to go with the compacter "single line" case statements in some specific
instances where this makes the code much more compact and easier to
read.
While doing that I changed Linus' code to do 'retVal = ...; break;'
instead of just 'return ...;' - this is more consistent and makes
debugging a little easier.
And while doing all that, I also cleaned up divelistview.cpp a little bit.
And removed an unused variable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the regression that I caused in the last commit,
where the selection was being correctly reestored from tree-to-table,
but it was incorrectly being restored from table-to-tree.
I also added a bit of speedup on the view while changing columns.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Sorting is now working as it should, changing
from table to tree, keeping the selection from
table to tree ( but there's a regression on
tree to table conversion, I'll try to fix it
in the following commit. ).
this commit also cleans a lot of boilerplate
code that I wrote to bypass a graphics bug,
that I seem to have correctly fixed in this
version.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Things are working as they should, but I hit on -probably- a Qt bug
that makes painting on the table view a bit weird ( it only updates
the painting by moving the mouse around ). I'll try to fake the
mouse movements in a couple of commits after this one.
There's also a few columns that are not being correctly sorted,
probably something to do with the SortRole.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
By default, sorting is done by the display role, but then we end up
sorting by the string we display, which is almost always the wrong thing.
So this adds a new "SORT_ROLE" that is used for sorting, and then the
data lookup can return the raw data we want to sort by.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set default zoom level only when at least one dive selected
and user have not changed it.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the red dc ceiling as preference option.
Hooked them all up together so the sub-preferences are enabled when the
master preference is set (for 3m and red ceiling).
Use the options in the profile plotting functions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial state needs to reflect the value of the checkbox. Once the
dialog is run, there is a signal/slot connection in the .ui file that
keeps things in sync.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The biggest problem here was that bool has different sizes in C and C++
code. So using this in a structure shared between the two sides wasn't a
smart idea.
Instead I went with 'short', but that caused problems with Qt being to
smart for its own good and not doing the right thing when dealing with
'boolean' settings and a short value. This may be something in the way I
implemented things (as I doubt that something this fundamental would be
broken) but the workaround implemented here (explicitly using 0 or 1
depending on the value of the boolean) seems to work.
I also decided to get rid of the confusion of where gflow/gfhigh are
floating point (0..1) and when they are integers (0..100). We now use
integers anywhere outside of deco.c.
I also applied some serious spelling corrections to the preferences
dialog's ui file.
Finally, this enables the code that selects which partial pressure graph
to show.
Still to do: font size, metric/imperial logic
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support for switching Tree / List
while clicking on a column header. This triggers
a sad-painting bug on the list - I guess I'll have
to fix it too. I'd apreciate some help on it, tougth.
next: keep the selection.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This code adds the possibility to make the DiveList behave
like a Tree or a List, depending on what layout is set.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This had been bugging me for a while - the label texts were all not
quite where I expected them to be. I think this looks much better now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The imperial/metric super setting doesn't have any effect. But changing
the individual units now works and is tracked. And causes the display to
change after clicking "OK" (but not yet when clicking "Apply").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Several changes:
- split the reload of the DiveListView from the reload of the header
- don't include the column title in the name of the setting; the title
will change depending on the units and localization chosen by the user
- rename the slot that toggles visibility to make the code more readable
- use setCollumHidden() method to simplify the code
- don't save the width of hidden columns (as they would be saved as zero
width and can then no longer be enabled)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
My attempts to actually set the width of the columns with the
SizeHintRole all failed - so I gave up on that and am forcing things to
work by making the texts in the header somewhat longer and then resizing
to that. Definitely not what I wanted to do - but that plus reducing the
font size gives us a much more reasonable / compact look.
I really hope that someone else can explain to me how to get the
SizeHintRole to affect the width (and not just the height - that part
worked just fine) of a the cells in a column. Then we can replace this
hack by a much better solution (that won't fail if the translated strings
look different).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user very quickly switches between dives the zoom level sometimes
gets reset to be much more "zoomed out" (basically if you change dives
before Marble had time to zoom all the way in to the previous dive it will
keep whatever was the last zoom level of the animation - I'd consider that
a Marble bug).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the user doesn't need to move the two folders googlemaps and
googlesat around in the filesystem.
This only works if Subsurface is started from the build directory - it
doesn't work when Subsurface is installed (and it doesn't at all address
the need to install these files and bundle them as well).
I'd consider this a hack to show how the real solution should work.
There is one more part of this that is a hack: Marble no longer searches
its default data directory; the path we set replaces the Marble system
search path. Sadly, Marble doesn't support paths the way Unix thinks of
them with multiple directories, separated by ':'. So this means that
Marble no longer finds any of its default icons. For most of them that
seems fine as I don't think lacking the icons for "manned_landing",
"robotic_rover", "unmanned_hard_landing" or the various types of places of
worship that Marble supports is necessarily a big issues for Subsurface,
but at least the default_location icon seemed important. And since we now
need to carry our own, I replaced the boring circle with a tiny dive flag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
North is always up anyway. At least that's the way we've done it so far.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code converted the lat/lon to int before multiplying with
1,000,000 (in order to create udeg). Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "no dive location" message box was displayed above the marble
widget, which made the layout splitter move horizontally.
Made the message box as an overlay on the map instead.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk asked me to try to make it more modern, so I
used as a base, the Firefox preferences. currently
it saves / loads the preferences, and also smits
a signal 'preferencesChanged' that should be connected
to anything that uses preferenes, via the PreferencesDialog::intance()
object. In the future, I plan to make it have a signal / slot for each
member that changes.
I also moved the icons to a new folder this time, because the
amount of icons is now more than just two, and it was
becoming messy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This commit fixes three different things:
- a memory leak in WeightModel::setData()
- getSetting() calling strdup() on a QByteArray
- a possible usage of memory after deallocation
Here's an explanation of the last issue (taken from the mailing list, slightly
adapted):
toByteArray(), as well as others "toSomething()" methods, returns
a new object which the compiler allocates on the stack. The compiler
will consider it a temporary data, and destroy it on the next line. So,
when one does
char *text= value.toByteArray().data(); // line 1
if (strcmp(description, text)) { // line 2
the compiler creates a QByteArray on line 1, calls ::data() on it, which
returns a valid char *, and assigns its value to "text". So far, so
good. But before jumping to line 2, the compiler destroys the temporary
QByteArray, and this will in turn invoke the QByteArray destructor,
which will destroy the internal data. The result is that on line 2,
"text" will point to some memory which has already been freed.
One solution is to store a copy of the temporary QByteArray into a local
variable: the compiler will still destroy the temporary QByteArray it created,
but (thanks to the reference-counted data sharing built in QByteArray) now the
destructor will see that the data is referenced by another instance of
QByteArray (the local variable "ba") and will not free the internal data.
In this way, the internal data will be available until the local variable is
destroyed, which will happen at the end of the {} block where it is defined.
Please note that when one uses the data in the same line, one doesn't need to
worry about this issue. In fact,
text = strdup(value.toString().toUtf8().data());
works just fine.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't Save/Cancel/Save is less ambiguous than OK/Cancel/Save. Also
being slightly more verbose when creating the QMessageBox.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the more familiar Save/Undo instead of OK/reset
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now detect if a weight / cylinder with this description exists and if
not add it on the fly. We also remember the additional values (weight and
size / workingpressure) for new entries and take the values for these
fields into account when autocompleting.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very much analogous to the way cylinders are implemented.
That means that just like with cylinders, if the user enters a new type
and hits 'tab' before hitting 'enter', Subsurface will crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The .ui components were removed in commit 0c7a575f7b3b ("Rework on the
Equipment tab to make it look more Modern.") but the "automagic" slots
were still here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this we should have tank editing mostly done.
See #122
(it's not quite fixed, we need the equivalent code for weight systems)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
this is more a 'Well, this is how we do it' than an actuall
good commit. I'm probably using the wrong conversion paradigm
( none ) to convert the data from psi / bar and such, it
changes the model with wrong data.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I had to immprove the TankInfoModel with two new methods,
insertRows and setData, because the delegate used this
model to show what kind of Tanks we are offering.
Since the user can enter a new type of Tank, it's important
to add this tank to all lists using the delegates.
I Also added two new methods on the delegate itself,
to correctly shows the data, and set the data on the
model. This also will help dirk with a working example
on how to edit things while using a delegate.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The data is saved in the settings and the correct dive computer (vendor
and product) and device are picked when the download dialog is openend.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had been disabled by some redraw optimizations in commit
81406b80c6ec ("Fix loading a second dive, after the first file was
loaded."). We need to redraw the plot not only if the dive changed but
also if the selected divecomputer changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a fun one.
We only want to mark the divelist changed if the user actually changed
something. So we try really hard to compare what was entered with what was
there and only if it is different do we overwrite existing values and
record this as a change to the divelist.
An additional challenge here is the fact that the user needs to enter a
working pressure before they can enter a size (when in cuft mode). That is
not really intuitive. We work around this by assuming working pressure is
3000psi if a size is given in cuft - but then if the user changes the
working pressure, that changes the volume. Now going back and changing the
volume again does the trick. Or enter the working pressure FIRST and then
the volume...
This also changes the incorrect MAXPRESSURE to WORKINGPRESSURE and uses
the text WorkPress in English (Gtk code used MaxPress which was simply
wrong - this is just the design pressure or working pressure, not some
hard maximum. In fact, people quite commonly "overfill" these tanks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now when you edit 'Type', a drop-down list will appear
and will enable you to choose from it's contents.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch adds basic editing functionality for Cylinders and Weigthsystems,
it still doesn't use delegates to show the data to the user in a better
way, and it does not take in consideration user preferences yet, but
it's a starting point.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This addresses two issues:
- the kMessageWidget did not word wrap, so if it was wider then the Globe
widget the Globe would expand (and divelist shrink) when the user
switched from a dive with location to a dive without location
- the code was also too aggressive removing and redrawing the message
widget when switching from dive to dive. with this change we only hide
the widget if the next dive has a location (and only show it if it isn't
shown already). We also hide the message if no dive is selected.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, the Cylinders and Weigthsystems got a new Trash icon,
and the interface already intercepts the clicks ( on all
columns ) and send this to the 'remove' method on boch
models. On the model I'm just filtering the indexes that
are not 'DELETE' and creating a stub method to be filled
later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Note that this is a WIP and it does break functionality
- ie, not possible to add Equipments, but this will be
fixed in the next commit. Removed add / edit / remove
buttons, only a single '+' icon appears on the widget
now. the edit / delete will be done in place.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Instead of passing pointers to GError around we pass just pointers to
error message texts around and use kMessageWidget to show those. Problem
is that right now the close button on that doesn't do a thing - so the
error stays around indefinitely. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also changed a bit the behavior on how the QSettings are managed,
till now, we used the QSettings constructor passing the name of the
software and the 'company', but this is now default - so there's no
need to pass anything by the QSettings contructor.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ordering here is important - we can't resize the columns before they are
created. On the other hand this now means that we explicitly need to
expand to the first dive shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support showing and for editing weigthsystems in the equipment tab,
so, now the two things that are missing are 'edit' and 'delete', wich are quite easy to do.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
i
Added the code to show the cylinders from a dive,
this code also already permits additions from the
interface, so the user can click 'add' and insert
what he wants there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Small changes to the names of elements the divecomputer download UI and
very simplistic first stab at populating the device_data_t structure.
This is lacking lots of things
- it should remember the last vendor / product used
- it should figure out which device (mount point) to offer
- it needs proper error handling
But it's a step in the right direction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses the QStringListModel to populate the items
of the QComboBoxes. I used a QHash to hold every Computer
of a particular Vendor. so, products[vendor] gives me
the full list of products from each vendor.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I think it's self explanatory - When user clicks on
'Cancel', the interface will wait for the trhead to quit
then will close itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is the skeleton code for a non-blocking ui-thread
It already creates the first-thread ( 'do not block the ui' )
and the second thread ('download from the dive computer')
We can in the future merge both in the same place - I didn't
want to do that now because the download function is written
in the libdivecomputer.c code, and I cant just transform that
to a QThread and use signals, so I used two threads for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This also removes some incorrect code from the clear() function for the
DiveInfo tab. Putting the readOnly() calls for the DiveNotes tab there was
wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This would be correct if the current selection code wasn't broken. Right
now we only add to our internal notion of what is selected - we never
deselect anything.
Once that is fixed, thestatistics should be correctly displayed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's not editable. And of course it continues to look like utter crap -
even more so now since this is left aligned and everything else is
centered.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also fixes a potential crash if no dives were loaded and the user
started editing the fields and clicked OK.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to do the right thing at exit (and also connects to more of
the menu actions to actually do something).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We want to give the user the option to 'cancel' and not exit the program,
to 'save' the file, or to say I'm 'OK' with losing the unsaved data.
This does NOT implement the actual save / save-as, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old names made sense in the initial model (where you'd click on the
edit button to start an edit). The new names seem much more natural given
what we do now.
Also a tiny code cleanup removing a redundant if statement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 7b00668b400b ("Improve the Dirk edit mode.") had what looks like an
"autocomplete" typo. This also stops us from changing the text on the
button that in this edit mode is always just the "OK" button.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pulled one more helper from statistics-gtk.c (but didn't modify the code
there to use it as that code is no longer being compiled).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dirk edit mode will be triggered as soon as the user
clicks on the field that he wants to edit. then he can
edit all fields, till he press ok / reset.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is just a for choosing the default edit style in the
future. I prefer the new edit style as the user is sure
what the hell is going on ( ie - if he chooses to edit,
he is editing, there's a message warning him that he is
editing and everything else is blocked till he finishes
editing. ) and the GTK version is 'edit whenever I feel like',
wich I think is more unsafe but dirk asked me to put an option
and let the others choose.
e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This makes the DiveList be similiar to the GTK one, comparing
the size of the text. The current code makes text on the
table be 30% smaller.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This seemed more logical than keeping it as "edit" and basically having to
hit "edit" a second time in order to save a change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to prevent loss of data, so if the user is editing something,
either cancel the edition or save it, to continue moving around on
the Dive List. - Only the dive list is affected, user can still
play with the globe and the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added option to edit the selected dive.
Now the user can click on 'Edit', and a nice box will
appear stating that the dive is in edit mode, and the user
can edit all of the 'Notes' tab fields, including the
rating. When the edition is finished, the user needs to
click on 'edit' again to mark as accepted, or in
reset to reset the fields to it's original state
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a major hack. Debian appears to be missing a necessary header file
for Marble to work correctly. We include this header file for now and hack
the Configure process to recognize that we are on Debian and force using
our local copy of the header file in that case.
This may be needed on Ubuntu as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Borrowed the code from KMessageWidget from Aurelian Gateau, Kdelibs,
to better show passive information and notifications. instead of a
popup blowing in the user's face, a nice, animated and well designed
widget will gracefully fade-in, show the notes, and fade out when
not needed anymore.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the possibility to change the coordinates of a dive.
it's too intrusive in the moment, but it was a proof
of concept. so I'll commit as is and try to find a better
way to warn the user what's going on in the future, using
something less terrible than a popup exploding in his face.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
