subsurface/qt-ui/configuredivecomputerdialog.cpp
Anton Lundin 1c2ddd62c1 Disable update firmware button for OSTC3 for now
We currently don't support update firmware for the OSTC3. Where waiting
for support in libdivecomputer for that, so disable that button for now.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-10-20 18:11:48 -07:00

636 lines
25 KiB
C++

#include "configuredivecomputerdialog.h"
#include "../divecomputer.h"
#include "../libdivecomputer.h"
#include "../helpers.h"
#include "../display.h"
#include "../divelist.h"
#include "configuredivecomputer.h"
#include <QFileDialog>
#include <QMessageBox>
#include <QSettings>
struct product {
const char *product;
dc_descriptor_t *descriptor;
struct product *next;
};
struct vendor {
const char *vendor;
struct product *productlist;
struct vendor *next;
};
struct mydescriptor {
const char *vendor;
const char *product;
dc_family_t type;
unsigned int model;
};
ConfigureDiveComputerDialog::ConfigureDiveComputerDialog(QWidget *parent) :
QDialog(parent),
config(0),
deviceDetails(0)
{
ui.setupUi(this);
deviceDetails = new DeviceDetails(this);
config = new ConfigureDiveComputer(this);
connect(config, SIGNAL(error(QString)), this, SLOT(configError(QString)));
connect(config, SIGNAL(message(QString)), this, SLOT(configMessage(QString)));
connect(config, SIGNAL(readFinished()), this, SLOT(deviceReadFinished()));
connect(config, SIGNAL(deviceDetailsChanged(DeviceDetails*)),
this, SLOT(deviceDetailsReceived(DeviceDetails*)));
connect(ui.retrieveDetails, SIGNAL(clicked()), this, SLOT(readSettings()));
connect(ui.resetButton, SIGNAL(clicked()), this, SLOT(resetSettings()));
memset(&device_data, 0, sizeof(device_data));
fill_computer_list();
if (default_dive_computer_device)
ui.device->setEditText(default_dive_computer_device);
ui.DiveComputerList->setCurrentRow(0);
on_DiveComputerList_currentRowChanged(0);
QSettings settings;
settings.beginGroup("ConfigureDiveComputerDialog");
settings.beginGroup("ostc3GasTable");
for (int i = 0; i < ui.ostc3GasTable->columnCount(); i++) {
QVariant width = settings.value(QString("colwidth%1").arg(i));
if (width.isValid())
ui.ostc3GasTable->setColumnWidth(i, width.toInt());
}
settings.endGroup();
settings.beginGroup("ostc3DilTable");
for (int i = 0; i < ui.ostc3DilTable->columnCount(); i++) {
QVariant width = settings.value(QString("colwidth%1").arg(i));
if (width.isValid())
ui.ostc3DilTable->setColumnWidth(i, width.toInt());
}
settings.endGroup();
settings.beginGroup("ostc3SetPointTable");
for (int i = 0; i < ui.ostc3SetPointTable->columnCount(); i++) {
QVariant width = settings.value(QString("colwidth%1").arg(i));
if (width.isValid())
ui.ostc3SetPointTable->setColumnWidth(i, width.toInt());
}
settings.endGroup();
settings.endGroup();
}
ConfigureDiveComputerDialog::~ConfigureDiveComputerDialog()
{
QSettings settings;
settings.beginGroup("ConfigureDiveComputerDialog");
settings.beginGroup("ostc3GasTable");
for (int i = 0; i < ui.ostc3GasTable->columnCount(); i++)
settings.setValue(QString("colwidth%1").arg(i), ui.ostc3GasTable->columnWidth(i));
settings.endGroup();
settings.beginGroup("ostc3DilTable");
for (int i = 0; i < ui.ostc3DilTable->columnCount(); i++)
settings.setValue(QString("colwidth%1").arg(i), ui.ostc3DilTable->columnWidth(i));
settings.endGroup();
settings.beginGroup("ostc3SetPointTable");
for (int i = 0; i < ui.ostc3SetPointTable->columnCount(); i++)
settings.setValue(QString("colwidth%1").arg(i), ui.ostc3SetPointTable->columnWidth(i));
settings.endGroup();
settings.endGroup();
}
static void fillDeviceList(const char *name, void *data)
{
QComboBox *comboBox = (QComboBox *)data;
comboBox->addItem(name);
}
void ConfigureDiveComputerDialog::fill_device_list(int dc_type)
{
int deviceIndex;
ui.device->clear();
deviceIndex = enumerate_devices(fillDeviceList, ui.device, dc_type);
if (deviceIndex >= 0)
ui.device->setCurrentIndex(deviceIndex);
}
void ConfigureDiveComputerDialog::fill_computer_list()
{
dc_iterator_t *iterator = NULL;
dc_descriptor_t *descriptor = NULL;
struct mydescriptor *mydescriptor;
dc_descriptor_iterator(&iterator);
while (dc_iterator_next(iterator, &descriptor) == DC_STATUS_SUCCESS) {
const char *vendor = dc_descriptor_get_vendor(descriptor);
const char *product = dc_descriptor_get_product(descriptor);
if (!vendorList.contains(vendor))
vendorList.append(vendor);
if (!productList[vendor].contains(product))
productList[vendor].push_back(product);
descriptorLookup[QString(vendor) + QString(product)] = descriptor;
}
dc_iterator_free(iterator);
mydescriptor = (struct mydescriptor *)malloc(sizeof(struct mydescriptor));
mydescriptor->vendor = "Uemis";
mydescriptor->product = "Zurich";
mydescriptor->type = DC_FAMILY_NULL;
mydescriptor->model = 0;
if (!vendorList.contains("Uemis"))
vendorList.append("Uemis");
if (!productList["Uemis"].contains("Zurich"))
productList["Uemis"].push_back("Zurich");
descriptorLookup["UemisZurich"] = (dc_descriptor_t *)mydescriptor;
qSort(vendorList);
}
void ConfigureDiveComputerDialog::populateDeviceDetails()
{
switch(ui.dcStackedWidget->currentIndex()) {
case 0:
populateDeviceDetailsOSTC3();
break;
case 1:
populateDeviceDetailsSuuntoVyper();
break;
}
}
#define GET_INT_FROM(_field, _default) ((_field) != NULL) ? (_field)->text().toInt() : (_default)
void ConfigureDiveComputerDialog::populateDeviceDetailsOSTC3()
{
deviceDetails->setCustomText(ui.customTextLlineEdit->text());
deviceDetails->setDiveMode(ui.diveModeComboBox->currentIndex());
deviceDetails->setSaturation(ui.saturationSpinBox->value());
deviceDetails->setDesaturation(ui.desaturationSpinBox->value());
deviceDetails->setLastDeco(ui.lastDecoSpinBox->value());
deviceDetails->setBrightness(ui.brightnessComboBox->currentIndex());
deviceDetails->setUnits(ui.unitsComboBox->currentIndex());
deviceDetails->setSamplingRate(ui.samplingRateComboBox->currentIndex());
deviceDetails->setSalinity(ui.salinitySpinBox->value());
deviceDetails->setDiveModeColor(ui.diveModeColour->currentIndex());
deviceDetails->setLanguage(ui.languageComboBox->currentIndex());
deviceDetails->setDateFormat(ui.dateFormatComboBox->currentIndex());
deviceDetails->setCompassGain(ui.compassGainComboBox->currentIndex());
deviceDetails->setSyncTime(ui.dateTimeSyncCheckBox->isChecked());
deviceDetails->setSafetyStop(ui.safetyStopCheckBox->isChecked());
deviceDetails->setGfHigh(ui.gfHighSpinBox->value());
deviceDetails->setGfLow(ui.gfLowSpinBox->value());
deviceDetails->setPressureSensorOffset(ui.pressureSensorOffsetSpinBox->value());
deviceDetails->setPpO2Min(ui.ppO2MinSpinBox->value());
deviceDetails->setPpO2Max(ui.ppO2MaxSpinBox->value());
deviceDetails->setFutureTTS(ui.futureTTSSpinBox->value());
deviceDetails->setCcrMode(ui.ccrModeComboBox->currentIndex());
deviceDetails->setDecoType(ui.decoTypeComboBox->currentIndex());
deviceDetails->setAGFSelectable(ui.aGFSelectableCheckBox->isChecked());
deviceDetails->setAGFHigh(ui.aGFHighSpinBox->value());
deviceDetails->setAGFLow(ui.aGFLowSpinBox->value());
deviceDetails->setCalibrationGas(ui.calibrationGasSpinBox->value());
deviceDetails->setFlipScreen(ui.flipScreenCheckBox->isChecked());
deviceDetails->setSetPointFallback(ui.setPointFallbackCheckBox->isChecked());
//set gas values
gas gas1;
gas gas2;
gas gas3;
gas gas4;
gas gas5;
gas1.oxygen = GET_INT_FROM(ui.ostc3GasTable->item(0, 1), 21);
gas1.helium = GET_INT_FROM(ui.ostc3GasTable->item(0, 2), 0);
gas1.type = GET_INT_FROM(ui.ostc3GasTable->item(0, 3), 0);
gas1.depth = GET_INT_FROM(ui.ostc3GasTable->item(0, 4), 0);
gas2.oxygen = GET_INT_FROM(ui.ostc3GasTable->item(1, 1), 21);
gas2.helium = GET_INT_FROM(ui.ostc3GasTable->item(1, 2), 0);
gas2.type = GET_INT_FROM(ui.ostc3GasTable->item(1, 3), 0);
gas2.depth = GET_INT_FROM(ui.ostc3GasTable->item(1, 4), 0);
gas3.oxygen = GET_INT_FROM(ui.ostc3GasTable->item(2, 1), 21);
gas3.helium = GET_INT_FROM(ui.ostc3GasTable->item(2, 2), 0);
gas3.type = GET_INT_FROM(ui.ostc3GasTable->item(2, 3), 0);
gas3.depth = GET_INT_FROM(ui.ostc3GasTable->item(2, 4), 0);
gas4.oxygen = GET_INT_FROM(ui.ostc3GasTable->item(3, 1), 21);
gas4.helium = GET_INT_FROM(ui.ostc3GasTable->item(3, 2), 0);
gas4.type = GET_INT_FROM(ui.ostc3GasTable->item(3, 3), 0);
gas4.depth = GET_INT_FROM(ui.ostc3GasTable->item(3, 4), 0);
gas5.oxygen = GET_INT_FROM(ui.ostc3GasTable->item(4, 1), 21);
gas5.helium = GET_INT_FROM(ui.ostc3GasTable->item(4, 2), 0);
gas5.type = GET_INT_FROM(ui.ostc3GasTable->item(4, 3), 0);
gas5.depth = GET_INT_FROM(ui.ostc3GasTable->item(4, 4), 0);
deviceDetails->setGas1(gas1);
deviceDetails->setGas2(gas2);
deviceDetails->setGas3(gas3);
deviceDetails->setGas4(gas4);
deviceDetails->setGas5(gas5);
//set dil values
gas dil1;
gas dil2;
gas dil3;
gas dil4;
gas dil5;
dil1.oxygen = GET_INT_FROM(ui.ostc3DilTable->item(0, 1), 21);
dil1.helium = GET_INT_FROM(ui.ostc3DilTable->item(0, 2), 0);
dil1.type = GET_INT_FROM(ui.ostc3DilTable->item(0, 3), 0);
dil1.depth = GET_INT_FROM(ui.ostc3DilTable->item(0, 4), 0);
dil2.oxygen = GET_INT_FROM(ui.ostc3DilTable->item(1, 1), 21);
dil2.helium = GET_INT_FROM(ui.ostc3DilTable->item(1, 2), 0);
dil2.type = GET_INT_FROM(ui.ostc3DilTable->item(1, 3), 0);
dil2.depth = GET_INT_FROM(ui.ostc3DilTable->item(1, 4),0);
dil3.oxygen = GET_INT_FROM(ui.ostc3DilTable->item(2, 1), 21);
dil3.helium = GET_INT_FROM(ui.ostc3DilTable->item(2, 2), 0);
dil3.type = GET_INT_FROM(ui.ostc3DilTable->item(2, 3), 0);
dil3.depth = GET_INT_FROM(ui.ostc3DilTable->item(2, 4), 0);
dil4.oxygen = GET_INT_FROM(ui.ostc3DilTable->item(3, 1), 21);
dil4.helium = GET_INT_FROM(ui.ostc3DilTable->item(3, 2), 0);
dil4.type = GET_INT_FROM(ui.ostc3DilTable->item(3, 3), 0);
dil4.depth = GET_INT_FROM(ui.ostc3DilTable->item(3, 4), 0);
dil5.oxygen = GET_INT_FROM(ui.ostc3DilTable->item(4, 1), 21);
dil5.helium = GET_INT_FROM(ui.ostc3DilTable->item(4, 2), 0);
dil5.type = GET_INT_FROM(ui.ostc3DilTable->item(4, 3), 0);
dil5.depth = GET_INT_FROM(ui.ostc3DilTable->item(4, 4), 0);
deviceDetails->setDil1(dil1);
deviceDetails->setDil2(dil2);
deviceDetails->setDil3(dil3);
deviceDetails->setDil4(dil4);
deviceDetails->setDil5(dil5);
//set set point details
setpoint sp1;
setpoint sp2;
setpoint sp3;
setpoint sp4;
setpoint sp5;
sp1.sp = GET_INT_FROM(ui.ostc3SetPointTable->item(0, 1), 70);
sp1.depth = GET_INT_FROM(ui.ostc3SetPointTable->item(0, 2), 0);
sp2.sp = GET_INT_FROM(ui.ostc3SetPointTable->item(1, 1), 90);
sp2.depth = GET_INT_FROM(ui.ostc3SetPointTable->item(1, 2), 20);
sp3.sp = GET_INT_FROM(ui.ostc3SetPointTable->item(2, 1), 100);
sp3.depth = GET_INT_FROM(ui.ostc3SetPointTable->item(2, 2), 33);
sp4.sp = GET_INT_FROM(ui.ostc3SetPointTable->item(3, 1), 120);
sp4.depth = GET_INT_FROM(ui.ostc3SetPointTable->item(3, 2), 50);
sp5.sp = GET_INT_FROM(ui.ostc3SetPointTable->item(4, 1), 140);
sp5.depth = GET_INT_FROM(ui.ostc3SetPointTable->item(4, 2), 70);
deviceDetails->setSp1(sp1);
deviceDetails->setSp2(sp2);
deviceDetails->setSp3(sp3);
deviceDetails->setSp4(sp4);
deviceDetails->setSp5(sp5);
}
void ConfigureDiveComputerDialog::populateDeviceDetailsSuuntoVyper()
{
deviceDetails->setCustomText(ui.customTextLlineEdit_1->text());
deviceDetails->setSamplingRate(ui.samplingRateComboBox_1->currentIndex() == 3 ? 60 : (ui.samplingRateComboBox_1->currentIndex() + 1) * 10);
deviceDetails->setAltitude(ui.altitudeRangeComboBox->currentIndex());
deviceDetails->setPersonalSafety(ui.personalSafetyComboBox->currentIndex());
deviceDetails->setTimeFormat(ui.timeFormatComboBox->currentIndex());
deviceDetails->setUnits(ui.unitsComboBox_1->currentIndex());
deviceDetails->setDiveMode(ui.diveModeComboBox_1->currentIndex());
deviceDetails->setLightEnabled(ui.lightCheckBox->isChecked());
deviceDetails->setLight(ui.lightSpinBox->value());
deviceDetails->setAlarmDepthEnabled(ui.alarmDepthCheckBox->isChecked());
deviceDetails->setAlarmDepth(units_to_depth(ui.alarmDepthDoubleSpinBox->value()));
deviceDetails->setAlarmTimeEnabled(ui.alarmTimeCheckBox->isChecked());
deviceDetails->setAlarmTime(ui.alarmTimeSpinBox->value());
}
void ConfigureDiveComputerDialog::readSettings()
{
ui.statusLabel->clear();
ui.errorLabel->clear();
getDeviceData();
config->readSettings(&device_data);
}
void ConfigureDiveComputerDialog::resetSettings()
{
ui.statusLabel->clear();
ui.errorLabel->clear();
getDeviceData();
config->resetSettings(&device_data);
}
void ConfigureDiveComputerDialog::configMessage(QString msg)
{
ui.statusLabel->setText(msg);
}
void ConfigureDiveComputerDialog::configError(QString err)
{
ui.statusLabel->setText("");
ui.errorLabel->setText(err);
}
void ConfigureDiveComputerDialog::getDeviceData()
{
device_data.devname = strdup(ui.device->currentText().toUtf8().data());
device_data.vendor = strdup(selected_vendor.toUtf8().data());
device_data.product = strdup(selected_product.toUtf8().data());
device_data.descriptor = descriptorLookup[selected_vendor + selected_product];
device_data.deviceid = device_data.diveid = 0;
set_default_dive_computer_device(device_data.devname);
}
void ConfigureDiveComputerDialog::on_cancel_clicked()
{
this->close();
}
void ConfigureDiveComputerDialog::deviceReadFinished()
{
ui.statusLabel->setText(tr("Dive computer details read successfully."));
}
void ConfigureDiveComputerDialog::on_saveSettingsPushButton_clicked()
{
populateDeviceDetails();
getDeviceData();
config->saveDeviceDetails(deviceDetails, &device_data);
}
void ConfigureDiveComputerDialog::deviceDetailsReceived(DeviceDetails *newDeviceDetails)
{
deviceDetails = newDeviceDetails;
reloadValues();
}
void ConfigureDiveComputerDialog::reloadValues()
{
// Enable the buttons to do operations on this data
ui.saveSettingsPushButton->setEnabled(true);
ui.backupButton->setEnabled(true);
switch(ui.dcStackedWidget->currentIndex()) {
case 0:
reloadValuesOSTC3();
break;
case 1:
reloadValuesSuuntoVyper();
break;
}
}
void ConfigureDiveComputerDialog::reloadValuesOSTC3()
{
ui.serialNoLineEdit->setText(deviceDetails->serialNo());
ui.firmwareVersionLineEdit->setText(deviceDetails->firmwareVersion());
ui.customTextLlineEdit->setText(deviceDetails->customText());
ui.diveModeComboBox->setCurrentIndex(deviceDetails->diveMode());
ui.saturationSpinBox->setValue(deviceDetails->saturation());
ui.desaturationSpinBox->setValue(deviceDetails->desaturation());
ui.lastDecoSpinBox->setValue(deviceDetails->lastDeco());
ui.brightnessComboBox->setCurrentIndex(deviceDetails->brightness());
ui.unitsComboBox->setCurrentIndex(deviceDetails->units());
ui.samplingRateComboBox->setCurrentIndex(deviceDetails->samplingRate());
ui.salinitySpinBox->setValue(deviceDetails->salinity());
ui.diveModeColour->setCurrentIndex(deviceDetails->diveModeColor());
ui.languageComboBox->setCurrentIndex(deviceDetails->language());
ui.dateFormatComboBox->setCurrentIndex(deviceDetails->dateFormat());
ui.compassGainComboBox->setCurrentIndex(deviceDetails->compassGain());
ui.safetyStopCheckBox->setChecked(deviceDetails->safetyStop());
ui.gfHighSpinBox->setValue(deviceDetails->gfHigh());
ui.gfLowSpinBox->setValue(deviceDetails->gfLow());
ui.pressureSensorOffsetSpinBox->setValue(deviceDetails->pressureSensorOffset());
ui.ppO2MinSpinBox->setValue(deviceDetails->ppO2Min());
ui.ppO2MaxSpinBox->setValue(deviceDetails->ppO2Max());
ui.futureTTSSpinBox->setValue(deviceDetails->futureTTS());
ui.ccrModeComboBox->setCurrentIndex(deviceDetails->ccrMode());
ui.decoTypeComboBox->setCurrentIndex(deviceDetails->decoType());
ui.aGFSelectableCheckBox->setChecked(deviceDetails->aGFSelectable());
ui.aGFHighSpinBox->setValue(deviceDetails->aGFHigh());
ui.aGFLowSpinBox->setValue(deviceDetails->aGFLow());
ui.calibrationGasSpinBox->setValue(deviceDetails->calibrationGas());
ui.flipScreenCheckBox->setChecked(deviceDetails->flipScreen());
ui.setPointFallbackCheckBox->setChecked(deviceDetails->setPointFallback());
//load gas 1 values
ui.ostc3GasTable->setItem(0,1, new QTableWidgetItem(QString::number(deviceDetails->gas1().oxygen)));
ui.ostc3GasTable->setItem(0,2, new QTableWidgetItem(QString::number(deviceDetails->gas1().helium)));
ui.ostc3GasTable->setItem(0,3, new QTableWidgetItem(QString::number(deviceDetails->gas1().type)));
ui.ostc3GasTable->setItem(0,4, new QTableWidgetItem(QString::number(deviceDetails->gas1().depth)));
//load gas 2 values
ui.ostc3GasTable->setItem(1,1, new QTableWidgetItem(QString::number(deviceDetails->gas2().oxygen)));
ui.ostc3GasTable->setItem(1,2, new QTableWidgetItem(QString::number(deviceDetails->gas2().helium)));
ui.ostc3GasTable->setItem(1,3, new QTableWidgetItem(QString::number(deviceDetails->gas2().type)));
ui.ostc3GasTable->setItem(1,4, new QTableWidgetItem(QString::number(deviceDetails->gas2().depth)));
//load gas 3 values
ui.ostc3GasTable->setItem(2,1, new QTableWidgetItem(QString::number(deviceDetails->gas3().oxygen)));
ui.ostc3GasTable->setItem(2,2, new QTableWidgetItem(QString::number(deviceDetails->gas3().helium)));
ui.ostc3GasTable->setItem(2,3, new QTableWidgetItem(QString::number(deviceDetails->gas3().type)));
ui.ostc3GasTable->setItem(2,4, new QTableWidgetItem(QString::number(deviceDetails->gas3().depth)));
//load gas 4 values
ui.ostc3GasTable->setItem(3,1, new QTableWidgetItem(QString::number(deviceDetails->gas4().oxygen)));
ui.ostc3GasTable->setItem(3,2, new QTableWidgetItem(QString::number(deviceDetails->gas4().helium)));
ui.ostc3GasTable->setItem(3,3, new QTableWidgetItem(QString::number(deviceDetails->gas4().type)));
ui.ostc3GasTable->setItem(3,4, new QTableWidgetItem(QString::number(deviceDetails->gas4().depth)));
//load gas 5 values
ui.ostc3GasTable->setItem(4,1, new QTableWidgetItem(QString::number(deviceDetails->gas5().oxygen)));
ui.ostc3GasTable->setItem(4,2, new QTableWidgetItem(QString::number(deviceDetails->gas5().helium)));
ui.ostc3GasTable->setItem(4,3, new QTableWidgetItem(QString::number(deviceDetails->gas5().type)));
ui.ostc3GasTable->setItem(4,4, new QTableWidgetItem(QString::number(deviceDetails->gas5().depth)));
//load dil 1 values
ui.ostc3DilTable->setItem(0,1, new QTableWidgetItem(QString::number(deviceDetails->dil1().oxygen)));
ui.ostc3DilTable->setItem(0,2, new QTableWidgetItem(QString::number(deviceDetails->dil1().helium)));
ui.ostc3DilTable->setItem(0,3, new QTableWidgetItem(QString::number(deviceDetails->dil1().type)));
ui.ostc3DilTable->setItem(0,4, new QTableWidgetItem(QString::number(deviceDetails->dil1().depth)));
//load dil 2 values
ui.ostc3DilTable->setItem(1,1, new QTableWidgetItem(QString::number(deviceDetails->dil2().oxygen)));
ui.ostc3DilTable->setItem(1,2, new QTableWidgetItem(QString::number(deviceDetails->dil2().helium)));
ui.ostc3DilTable->setItem(1,3, new QTableWidgetItem(QString::number(deviceDetails->dil2().type)));
ui.ostc3DilTable->setItem(1,4, new QTableWidgetItem(QString::number(deviceDetails->dil2().depth)));
//load dil 3 values
ui.ostc3DilTable->setItem(2,1, new QTableWidgetItem(QString::number(deviceDetails->dil3().oxygen)));
ui.ostc3DilTable->setItem(2,2, new QTableWidgetItem(QString::number(deviceDetails->dil3().helium)));
ui.ostc3DilTable->setItem(2,3, new QTableWidgetItem(QString::number(deviceDetails->dil3().type)));
ui.ostc3DilTable->setItem(2,4, new QTableWidgetItem(QString::number(deviceDetails->dil3().depth)));
//load dil 4 values
ui.ostc3DilTable->setItem(3,1, new QTableWidgetItem(QString::number(deviceDetails->dil4().oxygen)));
ui.ostc3DilTable->setItem(3,2, new QTableWidgetItem(QString::number(deviceDetails->dil4().helium)));
ui.ostc3DilTable->setItem(3,3, new QTableWidgetItem(QString::number(deviceDetails->dil4().type)));
ui.ostc3DilTable->setItem(3,4, new QTableWidgetItem(QString::number(deviceDetails->dil4().depth)));
//load dil 5 values
ui.ostc3DilTable->setItem(4,1, new QTableWidgetItem(QString::number(deviceDetails->dil5().oxygen)));
ui.ostc3DilTable->setItem(4,2, new QTableWidgetItem(QString::number(deviceDetails->dil5().helium)));
ui.ostc3DilTable->setItem(4,3, new QTableWidgetItem(QString::number(deviceDetails->dil5().type)));
ui.ostc3DilTable->setItem(4,4, new QTableWidgetItem(QString::number(deviceDetails->dil5().depth)));
//load set point 1 values
ui.ostc3SetPointTable->setItem(0, 1, new QTableWidgetItem(QString::number(deviceDetails->sp1().sp)));
ui.ostc3SetPointTable->setItem(0, 2, new QTableWidgetItem(QString::number(deviceDetails->sp1().depth)));
//load set point 2 values
ui.ostc3SetPointTable->setItem(1, 1, new QTableWidgetItem(QString::number(deviceDetails->sp2().sp)));
ui.ostc3SetPointTable->setItem(1, 2, new QTableWidgetItem(QString::number(deviceDetails->sp2().depth)));
//load set point 3 values
ui.ostc3SetPointTable->setItem(2, 1, new QTableWidgetItem(QString::number(deviceDetails->sp3().sp)));
ui.ostc3SetPointTable->setItem(2, 2, new QTableWidgetItem(QString::number(deviceDetails->sp3().depth)));
//load set point 4 values
ui.ostc3SetPointTable->setItem(3, 1, new QTableWidgetItem(QString::number(deviceDetails->sp4().sp)));
ui.ostc3SetPointTable->setItem(3, 2, new QTableWidgetItem(QString::number(deviceDetails->sp4().depth)));
//load set point 5 values
ui.ostc3SetPointTable->setItem(4, 1, new QTableWidgetItem(QString::number(deviceDetails->sp5().sp)));
ui.ostc3SetPointTable->setItem(4, 2, new QTableWidgetItem(QString::number(deviceDetails->sp5().depth)));
}
void ConfigureDiveComputerDialog::reloadValuesSuuntoVyper()
{
const char *depth_unit;
ui.maxDepthDoubleSpinBox->setValue(get_depth_units(deviceDetails->maxDepth(), NULL, &depth_unit));
ui.maxDepthDoubleSpinBox->setSuffix(depth_unit);
ui.totalTimeSpinBox->setValue(deviceDetails->totalTime());
ui.numberOfDivesSpinBox->setValue(deviceDetails->numberOfDives());
ui.modelLineEdit->setText(deviceDetails->model());
ui.firmwareVersionLineEdit_1->setText(deviceDetails->firmwareVersion());
ui.serialNoLineEdit_1->setText(deviceDetails->serialNo());
ui.customTextLlineEdit_1->setText(deviceDetails->customText());
ui.samplingRateComboBox_1->setCurrentIndex(deviceDetails->samplingRate() == 60 ? 3 : (deviceDetails->samplingRate() / 10) - 1);
ui.altitudeRangeComboBox->setCurrentIndex(deviceDetails->altitude());
ui.personalSafetyComboBox->setCurrentIndex(deviceDetails->personalSafety());
ui.timeFormatComboBox->setCurrentIndex(deviceDetails->timeFormat());
ui.unitsComboBox_1->setCurrentIndex(deviceDetails->units());
ui.diveModeComboBox_1->setCurrentIndex(deviceDetails->diveMode());
ui.lightCheckBox->setChecked(deviceDetails->lightEnabled());
ui.lightSpinBox->setValue(deviceDetails->light());
ui.alarmDepthCheckBox->setChecked(deviceDetails->alarmDepthEnabled());
ui.alarmDepthDoubleSpinBox->setValue(get_depth_units(deviceDetails->alarmDepth(), NULL, &depth_unit));
ui.alarmDepthDoubleSpinBox->setSuffix(depth_unit);
ui.alarmTimeCheckBox->setChecked(deviceDetails->alarmTimeEnabled());
ui.alarmTimeSpinBox->setValue(deviceDetails->alarmTime());
}
void ConfigureDiveComputerDialog::on_backupButton_clicked()
{
QString filename = existing_filename ?: prefs.default_filename;
QFileInfo fi(filename);
filename = fi.absolutePath().append(QDir::separator()).append("Backup.xml");
QString backupPath = QFileDialog::getSaveFileName(this, tr("Backup dive computer settings"),
filename, tr("Backup files (*.xml)")
);
if (!backupPath.isEmpty()) {
populateDeviceDetails();
getDeviceData();
if (!config->saveXMLBackup(backupPath, deviceDetails, &device_data)) {
QMessageBox::critical(this, tr("XML backup error"),
tr("An error occurred while saving the backup file.\n%1")
.arg(config->lastError)
);
} else {
QMessageBox::information(this, tr("Backup succeeded"),
tr("Your settings have been saved to: %1")
.arg(backupPath)
);
}
}
}
void ConfigureDiveComputerDialog::on_restoreBackupButton_clicked()
{
QString filename = existing_filename ?: prefs.default_filename;
QFileInfo fi(filename);
filename = fi.absolutePath().append(QDir::separator()).append("Backup.xml");
QString restorePath = QFileDialog::getOpenFileName(this, tr("Restore dive computer settings"),
filename, tr("Backup files (*.xml)")
);
if (!restorePath.isEmpty()) {
if (!config->restoreXMLBackup(restorePath, deviceDetails)) {
QMessageBox::critical(this, tr("XML restore error"),
tr("An error occurred while restoring the backup file.\n%1")
.arg(config->lastError)
);
} else {
reloadValues();
//getDeviceData();
//config->saveDeviceDetails(deviceDetails, &device_data);
QMessageBox::information(this, tr("Restore succeeded"),
tr("Your settings have been restored successfully.")
);
}
}
}
void ConfigureDiveComputerDialog::on_updateFirmwareButton_clicked()
{
QString filename = existing_filename ?: prefs.default_filename;
QFileInfo fi(filename);
filename = fi.absolutePath();
QString firmwarePath = QFileDialog::getOpenFileName(this, tr("Select firmware file"),
filename, tr("All files (*.*)")
);
if (!firmwarePath.isEmpty()) {
getDeviceData();
config->startFirmwareUpdate(firmwarePath, &device_data);
}
}
void ConfigureDiveComputerDialog::on_DiveComputerList_currentRowChanged(int currentRow)
{
// Disable the buttons to do operations on this data
ui.saveSettingsPushButton->setEnabled(false);
ui.backupButton->setEnabled(false);
switch (currentRow) {
case 0:
selected_vendor = "Heinrichs Weikamp";
selected_product = "OSTC 3";
ui.updateFirmwareButton->setEnabled(false);
break;
case 1:
selected_vendor = "Suunto";
selected_product = "Vyper";
ui.updateFirmwareButton->setEnabled(false);
break;
default:
/* Not Supported */
return;
}
int dcType = DC_TYPE_SERIAL;
if (selected_vendor == QString("Uemis"))
dcType = DC_TYPE_UEMIS;
fill_device_list(dcType);
}