mifr/subsurface
1
0
Fork 0
mirror of https://github.com/subsurface/subsurface.git synced 2024-11-28 21:20:19 +00:00
Code Issues Projects Releases Packages Wiki Activity
subsurface/translations/subsurface_pl_PL.ts
Dirk Hohndel 99859d9a07 Updated the transation files 
Authors are tracked at transifex

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-09 10:47:50 -07:00

4645 lines
No EOL
168 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version="1.0" ?><!DOCTYPE TS><TS language="pl_PL" version="2.0">
<defaultcodec>UTF-8</defaultcodec>
<context>
<name>CylindersModel</name>
<message>
<location filename="../qt-ui/models.cpp" line="69"/>
<source>Type</source>
<translation>Rodzaj</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="69"/>
<source>Size</source>
<translation>Pojemność</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="69"/>
<source>WorkPress</source>
<translation>Ciś. robocze</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="69"/>
<source>StartPress</source>
<translation>Ciś. początkowe</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="69"/>
<source>EndPress</source>
<translation>Ciś. końcowe</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="69"/>
<source>He%</source>
<translation>He%</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="69"/>
<source>O</source>
<translation>O</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="70"/>
<source>Switch at</source>
<translation>Zmiana na</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="158"/>
<source>Clicking here will remove this cylinder.</source>
<translation>Kliknięcie tu usunie butlę z listy.</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="358"/>
<source>Cylinder cannot be removed</source>
<translation>Butla nie może być usunięta.</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="359"/>
<source>This gas in use. Only cylinders that are not used in the dive can be removed.</source>
<translation>Ten gaz jest używany. Można usuwać tylko butle, których nie używasz.</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="507"/>
<source>psi</source>
<translation>psi</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="508"/>
<source>bar</source>
<translation>bar</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="532"/>
<source>l</source>
<translation>l</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="533"/>
<source>cuft</source>
<translation>cuft</translation>
</message>
</context>
<context>
<name>DiveComputerManagementDialog</name>
<message>
<location filename="../qt-ui/divecomputermanagementdialog.ui" line="17"/>
<source>Edit Dive Computer Nicknames</source>
<translation>Edycja nazw komputerów nurkowych</translation>
</message>
<message>
<location filename="../qt-ui/divecomputermanagementdialog.cpp" line="50"/>
<source>Remove the selected Dive Computer?</source>
<translation>Usunąć wybrany komputer nurkowy?</translation>
</message>
<message>
<location filename="../qt-ui/divecomputermanagementdialog.cpp" line="51"/>
<source>Are you sure that you want to
remove the selected dive computer?</source>
<translation>Czy na pewno chcesz usunąć
wybrany komputer nurkowy?</translation>
</message>
</context>
<context>
<name>DiveComputerModel</name>
<message>
<location filename="../qt-ui/models.cpp" line="1411"/>
<source>Model</source>
<translation>Model</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1411"/>
<source>Device ID</source>
<translation>ID urządzenia</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1411"/>
<source>Nickname</source>
<translation>Nazwa</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1442"/>
<source>Clicking here will remove this divecomputer.</source>
<translation>Kliknięcie tu usunie komputer nurkowy.</translation>
</message>
</context>
<context>
<name>DiveEventItem</name>
<message>
<location filename="../qt-ui/profile/diveeventitem.cpp" line="96"/>
<source>Bailing out to OC</source>
<translation>Przejście na obieg otwarty</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveeventitem.cpp" line="98"/>
<source> begin</source>
<comment>Starts with space!</comment>
<translation> początek</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveeventitem.cpp" line="99"/>
<source> end</source>
<comment>Starts with space!</comment>
<translation> koniec</translation>
</message>
</context>
<context>
<name>DiveItem</name>
<message>
<location filename="../qt-ui/models.cpp" line="1243"/>
<source>/min</source>
<translation>/min</translation>
</message>
</context>
<context>
<name>DiveListView</name>
<message>
<location filename="../qt-ui/divelistview.cpp" line="53"/>
<source>Show Search Box</source>
<translation>Pokaż okno wyszukiwania</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="706"/>
<source>expand all</source>
<translation>rozwiń wszystkie</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="707"/>
<source>collapse all</source>
<translation>zwiń wszystkie</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="708"/>
<source>collapse others</source>
<translation>zwiń pozostałe</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="710"/>
<source>remove dive(s) from trip</source>
<translation>usuń nurkowanie(a) z grupy</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="711"/>
<source>create new trip above</source>
<translation>utwórz nową grupę powyżej</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="725"/>
<source>add dive(s) to trip immediately above</source>
<translation>dodaj nurkowanie(a) do grupy powyżej</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="727"/>
<source>add dive(s) to trip immediately below</source>
<translation>dodaj nurkowanie(a) do grupy poniżej</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="731"/>
<source>merge trip with trip above</source>
<translation>połącz grupę z grupą powyżej</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="732"/>
<source>merge trip with trip below</source>
<translation>połącz grupę z grupą poniżej</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="736"/>
<source>delete dive(s)</source>
<translation>usuń nurkowanie(a)</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="738"/>
<source>mark dive(s) invalid</source>
<translation>oznacz nurkowanie(a) jak niepoprawne</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="744"/>
<source>renumber dive(s)</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="745"/>
<source>shift times</source>
<translation>zmień czas</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="746"/>
<source>load images</source>
<translation>dodaj zdjęcia</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="767"/>
<source>Open Image Files</source>
<translation>Dodawanie zdjęć</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="767"/>
<source>Image Files (*.jpg *.jpeg *.pnm *.tif *.tiff)</source>
<translation>Pliki graficzne (*.jpg *.jpeg *.pnm *.tif *.tiff)</translation>
</message>
<message>
<location filename="../qt-ui/divelistview.cpp" line="742"/>
<source>merge selected dives</source>
<translation>połącz wybrane nurkowania</translation>
</message>
</context>
<context>
<name>DiveLogExportDialog</name>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="14"/>
<source>Export Dive Log Files</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="24"/>
<source>General Export</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="30"/>
<source>Export format</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="42"/>
<source>Subsurface XML</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="61"/>
<source>UDDF</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="74"/>
<source>divelogs.de</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="84"/>
<source>CSV</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="94"/>
<source>Worldmap</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="107"/>
<source>Selection</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="116"/>
<source>Selected dives</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="126"/>
<source>All dives</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="178"/>
<source>HTML</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="184"/>
<source>General Settings</source>
<translation>Ogólne</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="190"/>
<source>Subsurface Numbers</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="203"/>
<source>Selected Dives</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="216"/>
<source>Minimum Javascript</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="229"/>
<source>All Dives</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="239"/>
<source>Export List only</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="252"/>
<source>Style Options</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="264"/>
<source>Font</source>
<translation>Czcionka</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="274"/>
<source>Font size</source>
<translation>Rozmiar czcionki</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="285"/>
<source>8</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="290"/>
<source>10</source>
<translation>10</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="295"/>
<source>12</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="300"/>
<source>14</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="305"/>
<source>16</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="310"/>
<source>18</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="315"/>
<source>20</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="323"/>
<source>Theme</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="334"/>
<source>Light</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.ui" line="339"/>
<source>Sand</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.cpp" line="153"/>
<source>Export UDDF File as</source>
<translation>Eksportuj plik UDDF jako</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.cpp" line="154"/>
<source>UDDF files (*.uddf *.UDDF)</source>
<translation>Pliki UDDF (*.uddf *.UDDF)</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.cpp" line="157"/>
<source>Export CSV File as</source>
<translation>Eksportuj plik CSV jako</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.cpp" line="158"/>
<source>CSV files (*.csv *.CSV)</source>
<translation>pliki CSV (*.csv *.CSV)</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.cpp" line="162"/>
<source>Export World Map</source>
<translation>Eksport mapy świata</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.cpp" line="163"/>
<location filename="../qt-ui/divelogexportdialog.cpp" line="177"/>
<source>HTML files (*.html)</source>
<translation>Pliki HTML (*.html)</translation>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.cpp" line="167"/>
<source>Export Subsurface XML</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.cpp" line="168"/>
<source>XML files (*.xml *.ssrf)</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/divelogexportdialog.cpp" line="176"/>
<source>Export HTML files as</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>DiveLogImportDialog</name>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="14"/>
<source>Import dive log file</source>
<translation>Importowanie logów nurkowych</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="29"/>
<source>CSV options</source>
<translation>Opcje CVS</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="173"/>
<location filename="../qt-ui/divelogimportdialog.ui" line="490"/>
<source>Field Separator</source>
<translation>Separator danych</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="191"/>
<source>Pre-configured imports</source>
<translation>Predefiniowane konfiguracje</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="41"/>
<location filename="../qt-ui/divelogimportdialog.ui" line="277"/>
<source>Field Configuration</source>
<translation>Konfiguracja pól</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="80"/>
<source>Depth</source>
<translation>Głębokość</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="100"/>
<source>Stopdepth</source>
<translation>Przystanek</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="107"/>
<source>PO2</source>
<translation>PO2</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="114"/>
<location filename="../qt-ui/divelogimportdialog.ui" line="351"/>
<source>Time</source>
<translation>Czas</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="121"/>
<source>Temp</source>
<translation>Temperatura</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="151"/>
<source>Cns</source>
<translation>Cns</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="207"/>
<location filename="../qt-ui/divelogimportdialog.ui" line="254"/>
<source>Units</source>
<translation>Jednostki</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="220"/>
<location filename="../qt-ui/divelogimportdialog.ui" line="261"/>
<source>Metric</source>
<translation>Metryczny</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="225"/>
<location filename="../qt-ui/divelogimportdialog.ui" line="266"/>
<source>Imperial</source>
<translation>Imperialny</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="248"/>
<source>Manual dives</source>
<translation>Nurkowania dodane ręcznie</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="283"/>
<source>Dive #</source>
<translation>Nurkowanie #</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="317"/>
<source>Date</source>
<translation>Data</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="385"/>
<source>Duration</source>
<translation>Czas</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="470"/>
<source>Tags</source>
<translation>Tagi</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="419"/>
<source>Location</source>
<translation>Miejsce</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="453"/>
<source>Gps</source>
<translation>Gps</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="300"/>
<source>Max depth</source>
<translation>Głębokość maksymalna</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="334"/>
<source>Mean depth</source>
<translation>Głębokość średnia</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="368"/>
<source>Buddy</source>
<translation>Partner</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="402"/>
<source>Notes</source>
<translation>Opis</translation>
</message>
<message>
<location filename="../qt-ui/divelogimportdialog.ui" line="436"/>
<source>Weight</source>
<translation>Balast</translation>
</message>
</context>
<context>
<name>DivePlanner</name>
<message>
<location filename="../qt-ui/diveplanner.ui" line="106"/>
<source>Planned Dive Time</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/diveplanner.ui" line="134"/>
<source>Altitude</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/diveplanner.ui" line="141"/>
<source>ATM Pressure</source>
<translation>Ciśnienie atmosferyczne</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.ui" line="148"/>
<source>mbar</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/diveplanner.ui" line="158"/>
<source>m</source>
<translation>m</translation>
</message>
</context>
<context>
<name>DivePlannerPointsModel</name>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="137"/>
<source>unknown</source>
<translation>nieznana</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="586"/>
<source>Final Depth</source>
<translation>Głębokość końcowa </translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="588"/>
<source>Run time</source>
<translation>Czas</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="590"/>
<source>Duration</source>
<translation>Czas</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="592"/>
<source>Used Gas</source>
<translation>Używany gaz</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="594"/>
<source>CC Set Point</source>
<translation>CC Set Point</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="887"/>
<source>Discard the Plan?</source>
<translation>Porzucić plan?</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="888"/>
<source>You are about to discard your plan.</source>
<translation>Masz zamiar porzucić plan</translation>
</message>
</context>
<context>
<name>DivePlannerWidget</name>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="252"/>
<source>Dive Planner Points</source>
<translation>Plan nurkowy</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="256"/>
<source>Available Gases</source>
<translation>Dostępne gazy</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="279"/>
<source>add dive data point</source>
<translation>dodaj punkt do profilu</translation>
</message>
</context>
<context>
<name>DivePlotDataModel</name>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="93"/>
<source>Depth</source>
<translation>Głębokość</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="95"/>
<source>Time</source>
<translation>Czas</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="97"/>
<source>Pressure</source>
<translation>Ciśnienie</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="99"/>
<source>Temperature</source>
<translation>Temperatura</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="101"/>
<source>Color</source>
<translation>Kolor</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="103"/>
<source>User Entered</source>
<translation>Podane przez użytkownika</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="105"/>
<source>Cylinder Index</source>
<translation>numer butli</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="107"/>
<source>Pressure S</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="115"/>
<source>pN₂</source>
<translation>pN₂</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="117"/>
<source>pHe</source>
<translation>pHe</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="119"/>
<source>pO₂</source>
<translation>pO₂</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="109"/>
<source>Pressure I</source>
<translation>Ciśnienie I</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="111"/>
<source>Ceiling</source>
<translation>Sufit</translation>
</message>
<message>
<location filename="../qt-ui/profile/diveplotdatamodel.cpp" line="113"/>
<source>SAC</source>
<translation>SAC</translation>
</message>
</context>
<context>
<name>DiveTripModel</name>
<message>
<location filename="../qt-ui/models.cpp" line="1286"/>
<source>#</source>
<translation>#</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1289"/>
<source>date</source>
<translation>data</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1295"/>
<source>m</source>
<translation>m</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1295"/>
<source>ft</source>
<translation>ft</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1298"/>
<source>min</source>
<translation>min</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1304"/>
<source>kg</source>
<translation>kg</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1304"/>
<source>lbs</source>
<translation>lbs</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1307"/>
<source>suit</source>
<translation>skafander</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1310"/>
<source>cyl</source>
<translation>butla</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1325"/>
<source>location</source>
<translation>miejsce</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1316"/>
<source>SAC</source>
<translation>SAC</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1319"/>
<source>OTU</source>
<translation>OTU</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1322"/>
<source>maxCNS</source>
<translation>maxCNS</translation>
</message>
</context>
<context>
<name>DivelogsDeWebServices</name>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="520"/>
<source>Invalid response from server</source>
<translation>Niepoprawna odpowiedź z serwera</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="528"/>
<source>Expected XML tag &apos;DiveDateReader&apos;, got instead &apos;%1</source>
<translation>Oczekiwano tagu XML &apos;DiveDateReader&apos;, zamiast tego odczytano &apos;%1</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="574"/>
<source>Expected XML tag &apos;DiveDates&apos; not found</source>
<translation>Oczekiwany tag XML &apos;DiveDates&apos; nie został znaleziony</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="581"/>
<source>Malformed XML response. Line %1: %2</source>
<translation>Uszkodzona odpowiedź XML. Linia %1: %2</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="111"/>
<source>no dives were selected</source>
<translation>nie wybrano żadnych nurkowań</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="130"/>
<source>failed to create zip file for upload: %s</source>
<translation>nie udało się utworzyć pliku zip do wysłania: %s</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="153"/>
<source>cannot create temporary file: %s</source>
<translation>nie można utworzyć pliku tymczasowego: %s</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="163"/>
<source>internal error: %s</source>
<translation>błąd wewnętrzny: %s</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="179"/>
<source>internal error</source>
<translation>błąd wewnętrzny</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="636"/>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="832"/>
<source>Done</source>
<translation>Zakończ</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="667"/>
<source>Uploading dive list...</source>
<translation>Wysyłanie listy nurkowań...</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="698"/>
<source>Downloading dive list...</source>
<translation>Pobieranie listy nurkowań...</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="746"/>
<source>Downloading %1 dives...</source>
<translation>Pobieranie %1 nurkowań...</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="789"/>
<source>Download finished - %1</source>
<translation>Zakończono pobieranie - %1</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="806"/>
<source>Corrupted download</source>
<translation>Pobrano uskodzone dane</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="807"/>
<source>The archive could not be opened:
%1</source>
<translation>Archiwum nie mogło zostać otworzone:
%1</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="846"/>
<source>Upload failed</source>
<translation>Wysyłanie nieudane</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="849"/>
<source>Upload successful</source>
<translation>Wysyłanie zakończone sukcesem</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="852"/>
<source>Login failed</source>
<translation>Błąd logowania</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="855"/>
<source>Cannot parse response</source>
<translation>Nie można przetworzyć odpowiedzi</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="866"/>
<source>Error: %1</source>
<translation>Błąd: %1</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="833"/>
<source>Upload finished</source>
<translation>Wysyłanie zakończone</translation>
</message>
</context>
<context>
<name>DownloadFromDCWidget</name>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="121"/>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="147"/>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="163"/>
<source>Error</source>
<translation>Błąd</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="143"/>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="167"/>
<source>Retry</source>
<translation>Ponów</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="257"/>
<source>Find Uemis dive computer</source>
<translation>Wykryj komputer Uemis</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="324"/>
<source>Choose file for divecomputer download logfile</source>
<translation>Wybierz plik używany do logowania postępu pobierania danych</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="325"/>
<source>Log files (*.log)</source>
<translation>Pliki logów (*.log)</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="340"/>
<source>Warning</source>
<translation>Ostrzeżenie</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="341"/>
<source>Saving the libdivecomputer dump will NOT download dives to the dive list.</source>
<translation>Użycie libdivecomputer w trybie diagnostycznym spowoduje, że pobrane nurkowania NIE ZOSTANĄ dodane do listy nurkowań.</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="352"/>
<source>Choose file for divecomputer binary dump file</source>
<translation>Wybierz plik do którego zapisane zostaną dane binarne</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.cpp" line="353"/>
<source>Dump files (*.bin)</source>
<translation>Pliki binarne (*.bin)</translation>
</message>
</context>
<context>
<name>DownloadFromDiveComputer</name>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="14"/>
<source>Download From Dive Computer</source>
<translation>Pobierz z komputera nurkowego</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="39"/>
<source>Vendor</source>
<translation>Producent</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="46"/>
<source>Dive Computer</source>
<translation>Komputer nurkowy</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="25"/>
<source>Device or Mount Point</source>
<translation>Urządzenie lub miejsce montowania</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="59"/>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="132"/>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="139"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="66"/>
<source>Force download of all dives</source>
<translation>Wymuś pobranie wszystkich nurkowań</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="73"/>
<source>Always prefer downloaded dives</source>
<translation>Pobrane dane mają priorytet </translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="95"/>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="102"/>
<source>Cancel</source>
<translation>Anuluj</translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="118"/>
<source>Save libdivecomputer logfile</source>
<translation>Zapisz log postępu libdivecomputer </translation>
</message>
<message>
<location filename="../qt-ui/downloadfromdivecomputer.ui" line="125"/>
<source>Save libdivecomputer dumpfile</source>
<translation>Zapisz zrzut danych libdivecomputer</translation>
</message>
</context>
<context>
<name>GlobeGPS</name>
<message>
<location filename="../qt-ui/globe.cpp" line="120"/>
<source>Edit Selected Dive Locations</source>
<translation>Wskaż miejsce zaznaczonych nurkowań</translation>
</message>
</context>
<context>
<name>MainTab</name>
<message>
<location filename="../qt-ui/maintab.ui" line="18"/>
<location filename="../qt-ui/maintab.cpp" line="416"/>
<source>Dive Notes</source>
<translation>Opis nurkowania</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="134"/>
<location filename="../qt-ui/maintab.cpp" line="440"/>
<source>Location</source>
<translation>Miejsce</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="63"/>
<source>Coordinates</source>
<translation>Współrzędne</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="162"/>
<source>Divemaster</source>
<translation>Divemaster</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="148"/>
<source>Buddy</source>
<translation>Partner</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="72"/>
<location filename="../qt-ui/maintab.cpp" line="245"/>
<source>Air temp</source>
<translation>Temperatura powietrza</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="79"/>
<location filename="../qt-ui/maintab.cpp" line="246"/>
<source>Water temp</source>
<translation>Temperatura wody</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="176"/>
<source>Tags</source>
<translation>Tagi</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="223"/>
<source>Rating</source>
<translation>Ocena</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="236"/>
<source>Visibility</source>
<translation>Widzialność</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="127"/>
<source>Suit</source>
<translation>Skafander</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="88"/>
<location filename="../qt-ui/maintab.cpp" line="441"/>
<source>Notes</source>
<translation>Opis</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="311"/>
<source>Equipment</source>
<translation>Wyposażenie</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="391"/>
<source>Dive Info</source>
<translation>Informacje</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="299"/>
<location filename="../qt-ui/maintab.ui" line="436"/>
<source>Date</source>
<translation>Data</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="275"/>
<source>Time</source>
<translation>Czas</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="455"/>
<source>Interval</source>
<translation>Przerwa powierzchniowa</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="474"/>
<source>Gases Used</source>
<translation>Dostępne gazy</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="493"/>
<source>Gas Consumed</source>
<translation>Zużyty gaz</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="512"/>
<location filename="../qt-ui/maintab.ui" line="770"/>
<source>SAC</source>
<translation>SAC</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="531"/>
<source>Max. Depth</source>
<translation>Max głębokość</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="550"/>
<source>Ave. Depth</source>
<translation>Średnia głębokość</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="569"/>
<source>OTU</source>
<translation>OTU</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="588"/>
<source>Air Pressure</source>
<translation>Ciśnienie atmosferyczne</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="607"/>
<source>Air Temperature</source>
<translation>Temperatura powietrza</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="626"/>
<source>Water Temperature</source>
<translation>Temperatura wody</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="645"/>
<source>Dive Time</source>
<translation>Czas nurkowania</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="664"/>
<source>Salinity</source>
<translation>Zasolenie</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="701"/>
<source>Stats</source>
<translation>Statystyka</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="746"/>
<source>Depth</source>
<translation>Głębokość</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="758"/>
<source>Temperature</source>
<translation>Temperatura</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="784"/>
<source>Duration</source>
<translation>Czas</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="816"/>
<source>Total Time</source>
<translation>Całkowity czas</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="835"/>
<source>Dives</source>
<translation>Nurkowania</translation>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="874"/>
<source>Gas Consumption</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/maintab.ui" line="919"/>
<source>Photos</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="89"/>
<source>Cylinders</source>
<translation>Butle</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="90"/>
<source>Add Cylinder</source>
<translation>Dodaj butlę</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="93"/>
<source>Weights</source>
<translation>Balast</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="94"/>
<source>Add Weight System</source>
<translation>Dodaj balast</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="409"/>
<source>Trip Location</source>
<translation>Miejsce nurkowań</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="387"/>
<location filename="../qt-ui/maintab.cpp" line="411"/>
<source>Trip Notes</source>
<translation>Opis nurkowań</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="48"/>
<source>Save</source>
<translation>Zapisz</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="52"/>
<source>Cancel</source>
<translation>Anuluj</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="242"/>
<source>Air temp [%1]</source>
<translation>Temp. powietrza [%1]</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="243"/>
<source>Water temp [%1]</source>
<translation>Temp. wody [%1]</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="278"/>
<source>This trip is being edited.</source>
<translation>Ta grupa nurkowań jest obecnie edytowana.</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="285"/>
<source>Multiple dives are being edited.</source>
<translation>Kilka nurkowań jest obecnie edytowanych.</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="287"/>
<source>This dive is being edited.</source>
<translation>To nurkowanie jest obecnie edytowane.</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="462"/>
<location filename="../qt-ui/maintab.cpp" line="470"/>
<location filename="../qt-ui/maintab.cpp" line="503"/>
<location filename="../qt-ui/maintab.cpp" line="504"/>
<location filename="../qt-ui/maintab.cpp" line="505"/>
<source>/min</source>
<translation>/min</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="464"/>
<source>unknown</source>
<translation>nieznana</translation>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="501"/>
<source>Deepest Dive</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="502"/>
<source>Shallowest Dive</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="794"/>
<source>Discard the Changes?</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/maintab.cpp" line="795"/>
<source>You are about to discard your changes.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>MainWindow</name>
<message>
<location filename="../qt-ui/mainwindow.ui" line="695"/>
<source>Filter</source>
<translation>Filtr</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="646"/>
<source>&amp;File</source>
<translation>Plik</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="567"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-weight:600;&quot;&gt;Dive plan details&lt;/span&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="583"/>
<source>Print</source>
<translation>Drukuj</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="616"/>
<source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:'Courier'; font-size:13pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot;-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:&apos;.Curier New&apos;;&quot;&gt;&lt;br /&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="667"/>
<source>&amp;Log</source>
<translation>Log</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="679"/>
<source>&amp;View</source>
<translation>Widok</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="701"/>
<source>&amp;Help</source>
<translation>Pomoc</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="709"/>
<source>&amp;Import</source>
<translation>Import</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="725"/>
<source>&amp;New logbook</source>
<translation>Nowy logbook</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="728"/>
<source>New</source>
<translation>Nowy</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="731"/>
<source>Ctrl+N</source>
<translation>Ctrl+N</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="736"/>
<source>&amp;Open logbook</source>
<translation>Otwórz logbook</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="739"/>
<source>Open</source>
<translation>Otwórz</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="742"/>
<source>Ctrl+O</source>
<translation>Ctrl+O</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="747"/>
<source>&amp;Save</source>
<translation>Zapisz</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="750"/>
<source>Save</source>
<translation>Zapisz</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="753"/>
<source>Ctrl+S</source>
<translation>Ctrl+S</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="758"/>
<source>Sa&amp;ve as</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="761"/>
<source>Save as</source>
<translation>Zapisz jako</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="764"/>
<source>Ctrl+Shift+S</source>
<translation>Ctrl+Shift+S</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="769"/>
<source>&amp;Close</source>
<translation>Zamknij</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="772"/>
<source>Close</source>
<translation>Zamknij</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="775"/>
<source>Ctrl+W</source>
<translation>Ctrl+W</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="788"/>
<source>P&amp;references</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="831"/>
<source>&amp;Add Dive</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="850"/>
<source>Auto &amp;Group</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="863"/>
<source>&amp;Dive List</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="871"/>
<source>&amp;Profile</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="879"/>
<source>&amp;Info</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="887"/>
<source>&amp;All</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="895"/>
<source>P&amp;rev DC</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="903"/>
<source>&amp;Next DC</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="911"/>
<source>&amp;Select Events</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="921"/>
<source>&amp;About Subsurface</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="937"/>
<source>&amp;Globe</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="953"/>
<source>&amp;Import Log Files</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="959"/>
<source>Ctrl+I</source>
<translation>Ctrl+I</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="1008"/>
<source>&amp;Export</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="1011"/>
<source>Export Dive Logs</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="1014"/>
<source>Ctrl+E</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="472"/>
<source>Enable the pN2 Graph</source>
<translation>Pokazuj wykres pN2</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="128"/>
<source>Enable the pHe graph</source>
<translation>Pokazuj wykres pHe</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="290"/>
<source>Show/hide heart rate</source>
<translation>Pokazuj tętno</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="342"/>
<source>Enable EAD, END, and EADD</source>
<translation>Pokazuj EAD, END, EADD</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="238"/>
<source>Show NDL / TTS</source>
<translation>Pokazuj NDL / TTS</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="394"/>
<source>Rescale depth axis</source>
<translation>Skalowanie osi głebokości</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="780"/>
<source>&amp;Print</source>
<translation>Drukuj</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="791"/>
<source>Ctrl+,</source>
<translation>Ctrl+,</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="799"/>
<source>&amp;Quit</source>
<translation>Wyjdź</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="810"/>
<source>Import from &amp;dive computer</source>
<translation>Importuj z komputera nurkowego</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="818"/>
<source>Import &amp;GPS data from Subsurface Service</source>
<translation>Importuj dane GPS z Subsurface Service</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="821"/>
<source>Ctrl+G</source>
<translation>Ctrl+G</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="826"/>
<source>&amp;Edit Device Names</source>
<translation>Edycja nazw komputerów nurkowych</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="834"/>
<source>Ctrl++</source>
<translation>Ctrl++</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="839"/>
<source>&amp;Renumber</source>
<translation>Zmień numerację</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="842"/>
<source>Ctrl+R</source>
<translation>Ctrl+R</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="855"/>
<source>&amp;Yearly Statistics</source>
<translation>Statystyka roczna</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="858"/>
<source>Ctrl+Y</source>
<translation>Ctrl+Y</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="929"/>
<source>User &amp;Manual</source>
<translation>Instrukcja obsługi</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="945"/>
<source>P&amp;lan Dive</source>
<translation>Zaplanuj nurkowanie</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="948"/>
<source>Ctrl+L</source>
<translation>Ctrl+L</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="1003"/>
<source>&amp;Check for Updates</source>
<translation>Sprawdź dostępność aktualizacji</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="783"/>
<source>Ctrl+P</source>
<translation>Ctrl+P</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="446"/>
<source>Enable the pO2 Graph</source>
<translation>Pokazuj wykres pO2</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="131"/>
<location filename="../qt-ui/mainwindow.ui" line="157"/>
<location filename="../qt-ui/mainwindow.ui" line="186"/>
<location filename="../qt-ui/mainwindow.ui" line="215"/>
<location filename="../qt-ui/mainwindow.ui" line="241"/>
<location filename="../qt-ui/mainwindow.ui" line="267"/>
<location filename="../qt-ui/mainwindow.ui" line="293"/>
<location filename="../qt-ui/mainwindow.ui" line="319"/>
<location filename="../qt-ui/mainwindow.ui" line="345"/>
<location filename="../qt-ui/mainwindow.ui" line="371"/>
<location filename="../qt-ui/mainwindow.ui" line="397"/>
<location filename="../qt-ui/mainwindow.ui" line="423"/>
<location filename="../qt-ui/mainwindow.ui" line="449"/>
<location filename="../qt-ui/mainwindow.ui" line="475"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="316"/>
<source>Enable MOD</source>
<translation>Pokazuj MOD</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="183"/>
<source>Show the DC Reported Ceiling</source>
<translation>Pokazuj sufit z komputera nurkowego</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="212"/>
<source>Show the Calculated Ceiling</source>
<translation>Pokazuj obliczony sufit</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="264"/>
<source>Show Calculated Ceiling with 3m Increments</source>
<translation>Pokazuj obliczony sufit z krokiem 3m</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="154"/>
<source>Calculate All Tissues</source>
<translation>Obliczenia dla wszystkich tkanek</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="368"/>
<source>Show SAC Rate</source>
<translation>Pokazuj SAC</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="420"/>
<source>Enable / Disable the Ruler</source>
<translation>Pokazuj linijkę</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="802"/>
<source>Ctrl+Q</source>
<translation>Ctrl+Q</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="813"/>
<source>Ctrl+D</source>
<translation>Ctrl+D</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="866"/>
<source>Ctrl+2</source>
<translation>Ctrl+2</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="874"/>
<source>Ctrl+3</source>
<translation>Ctrl+3</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="882"/>
<source>Ctrl+4</source>
<translation>Ctrl+4</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="890"/>
<source>Ctrl+1</source>
<translation>Ctrl+1</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="898"/>
<source>Left</source>
<translation>W lewo</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="906"/>
<source>Right</source>
<translation>W prawo</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="916"/>
<source>Input Plan</source>
<translation>Wprowadź plan</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="932"/>
<source>F1</source>
<translation>F1</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="940"/>
<source>Ctrl+5</source>
<translation>Ctrl+5</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="956"/>
<source>Import divelog files from other applications</source>
<translation>Importuj logi z innej aplikacji</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="964"/>
<source>Import &amp;from Divelogs.de</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="972"/>
<source>&amp;Full Screen</source>
<translation>Pełen ekran</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="975"/>
<source>Toggle Full Screen</source>
<translation>Przełącz pełen ekran</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.ui" line="978"/>
<source>F11</source>
<translation>F11</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="191"/>
<source>Open File</source>
<translation>Otwórz plik</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="281"/>
<source>Please save or cancel the current dive edit before closing the file.</source>
<translation>Zapisz zmiany lub anuluj edycję tego nurkowania przed zamknięciem pliku.</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="388"/>
<source>Please save or cancel the current dive edit before trying to add a dive.</source>
<translation>Zapisz zmiany lub anuluj edycję tego nurkowania przed dodaniem nowego.</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="419"/>
<source>Print runtime table</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="710"/>
<source>Do you want to save the changes you made in the file %1?</source>
<translation>Czy chcesz zapisać zmiany dokonane w pliku %1?</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="712"/>
<source>Do you want to save the changes you made in the datafile?</source>
<translation>Czy chcesz zapisać wprowadzone zmiany?</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="717"/>
<source>Save Changes?</source>
<translation>Zapisać zmiany?</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="718"/>
<source>Changes will be lost if you don&apos;t save them.</source>
<translation>Zmiany zostaną utracone jeśli ich nie za zapiszesz.</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="1075"/>
<source>Save File as</source>
<translation>Zapisz plik jako</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="249"/>
<location filename="../qt-ui/mainwindow.cpp" line="388"/>
<location filename="../qt-ui/mainwindow.cpp" line="1225"/>
<source>Warning</source>
<translation>Ostrzeżenie</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="188"/>
<location filename="../qt-ui/mainwindow.cpp" line="1059"/>
<source>Please save or cancel the current dive edit before opening a new file.</source>
<translation>Zapisz zmiany lub anuluj to nurkowanie przez otwarciem nowego pliku.</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="514"/>
<source>Yearly Statistics</source>
<translation>Statystyka roczna</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="1076"/>
<source>Subsurface XML files (*.ssrf *.xml *.XML)</source>
<translation>Pliki Subsurface XML (*.ssrf *.xml *.XML)</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="1199"/>
<source>Open Dive Log File</source>
<translation>Otwórz plik z logiem</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="1200"/>
<source>Dive Log Files (*.xml *.uddf *.udcf *.csv *.jlb *.dld *.sde *.db);;XML Files (*.xml);;UDDF/UDCF Files(*.uddf *.udcf);;JDiveLog Files(*.jlb);;Suunto Files(*.sde *.db);;CSV Files(*.csv);;All Files(*)</source>
<translation>logi nurkowe (*.xml *.uddf *.udcf *.csv *.jlb *.dld *.sde *.db);;Pliki XML (*.xml);;Pliki UDDF/UDCF (*.uddf *.udcf);;Pliki JDiveLog (*.jlb);;Pliki Suunto (*.sde *.db);;Pliki CSV(*.csv);;Wszystkie pliki(*)</translation>
</message>
<message>
<location filename="../qt-ui/mainwindow.cpp" line="1225"/>
<source>Please, first finish the current edition before trying to do another.</source>
<translation>Proszę dokończyć edycję tego nurkowania przed rozpoczęciem kolejnej. </translation>
</message>
</context>
<context>
<name>PlannerSettingsWidget</name>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="409"/>
<source>Last stop at 20ft</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="416"/>
<source>Last stop at 6m</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>PreferencesDialog</name>
<message>
<location filename="../qt-ui/preferences.ui" line="85"/>
<source>Defaults</source>
<translation>Ogólne</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="95"/>
<source>Units</source>
<translation>Jednostki</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="105"/>
<source>Graph</source>
<translation>Wykres</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="115"/>
<source>Language</source>
<translation>Język</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="125"/>
<source>Network</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="151"/>
<source>Lists and Tables</source>
<translation>Listy i tabele</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="157"/>
<source>Font</source>
<translation>Czcionka</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="167"/>
<source>Font size</source>
<translation>Rozmiar czcionki</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="180"/>
<source>Dives</source>
<translation>Nurkowania</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="186"/>
<source>Default Dive file</source>
<translation>Domyślny plik nurkowań</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="198"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="207"/>
<source>Display Invalid</source>
<translation>Pokazuj nurkowania oznaczone jako niepoprawne </translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="224"/>
<source>Default Cylinder</source>
<translation>Domyślna butla</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="230"/>
<source>Use Default Cylinder</source>
<translation>Użyj domyślnej butli</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="247"/>
<source>Animations</source>
<translation>Animacje</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="253"/>
<source>Speed</source>
<translation>Prędkość</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="280"/>
<source>Subsurface Webservice</source>
<translation>Usługa Internetowa Subsurface</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="286"/>
<source>Default User ID</source>
<translation>Domyślne ID Użytkownika</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="296"/>
<source>Save User ID locally?</source>
<translation>Zapisywać ID użytkownika do pliku?</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="306"/>
<source>Clear all settings</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="312"/>
<source>Reset all settings to their default value</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="341"/>
<source>System</source>
<translation>System</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="348"/>
<source>Metric</source>
<translation>Metryczny</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="358"/>
<source>Imperial</source>
<translation>Imperialny</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="368"/>
<source>Personalize</source>
<translation>Dostosuj</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="392"/>
<source>Depth</source>
<translation>Głębokość</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="399"/>
<source>meter</source>
<translation>metry</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="409"/>
<source>feet</source>
<translation>stopy</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="426"/>
<source>bar</source>
<translation>bar</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="436"/>
<source>psi</source>
<translation>psi</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="453"/>
<source>liter</source>
<translation>litry</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="463"/>
<source>cu ft</source>
<translation>stopy sześcienne (cu ft)</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="480"/>
<source>celsius</source>
<translation>stopnie Celsjusza</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="490"/>
<source>fahrenheit</source>
<translation>stopnie Fahrenheita</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="507"/>
<source>kg</source>
<translation>kg</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="598"/>
<source>threshold when showing pO₂</source>
<translation>próg ostrzeżenia dla pO₂</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="619"/>
<source>threshold when showing pN₂</source>
<translation>próg ostrzeżenia dla pN₂</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="640"/>
<source>threshold when showing pHe</source>
<translation>próg ostrzeżenia dla pHe</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="811"/>
<source>Proxy</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="817"/>
<source>Proxy type</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="830"/>
<source>Host</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="856"/>
<source>Port</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="882"/>
<source>Requires authentication</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="902"/>
<source>Username</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="925"/>
<source>Password</source>
<translation>Hasło</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="682"/>
<source>draw dive computer reported ceiling red</source>
<translation>Pokazuj sufit z komputera nurkowego na czerwono</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="772"/>
<source>System Default</source>
<translation>Domyślne ustawienia systemu</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="792"/>
<source>Filter</source>
<translation>Filtr</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="419"/>
<source>Pressure</source>
<translation>Ciśnienie</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="446"/>
<source>Volume</source>
<translation>Objętość</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="473"/>
<source>Temperature</source>
<translation>Temperatura</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="500"/>
<source>Weight</source>
<translation>Balast</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="517"/>
<source>lbs</source>
<translation>lbs</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="532"/>
<source>Time units</source>
<translation>Jednostki czasu</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="538"/>
<source>Ascent/Descent speed denominator</source>
<translation>Mianownik szybkości zanurzania/wynurzania </translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="545"/>
<source>Minutes</source>
<translation>minuty</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="555"/>
<source>Seconds</source>
<translation>sekundy</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="587"/>
<source>Show</source>
<translation>Pokaż</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="661"/>
<source>max pO₂ when showing MOD</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="693"/>
<source>Show non-used cylinders in Equipment Tab</source>
<translation>Pokazju nieużywane butle w zakładce Wyposażenie</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="704"/>
<source>show average depth</source>
<translation>pokazuj głębokość średnią</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="756"/>
<source>GFLow at max depth</source>
<translation>GFLow na maksymalnej głębokości</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="716"/>
<source>Misc</source>
<translation>Różne</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="14"/>
<source>Preferences</source>
<translation>Ustawienia</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="722"/>
<source>GFLow</source>
<translation>GFLow</translation>
</message>
<message>
<location filename="../qt-ui/preferences.ui" line="739"/>
<source>GFHigh</source>
<translation>GFHigh</translation>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="23"/>
<source>No proxy</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="24"/>
<source>System proxy</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="25"/>
<source>HTTP proxy</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="26"/>
<source>SOCKS proxy</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="245"/>
<source>Restart required</source>
<translation>Wymagane ponowne uruchomienie</translation>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="246"/>
<source>To correctly load a new language you must restart Subsurface.</source>
<translation>Aby użyć nowego języka musisz ponownie uruchomić Subsurface.</translation>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="381"/>
<source>Open Default Log File</source>
<translation>Otwórz domyślny plik</translation>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="381"/>
<source>Subsurface XML files (*.ssrf *.xml *.XML)</source>
<translation>Pliki Subsurface XML (*.ssrf *.xml *.XML)</translation>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="394"/>
<source>Warning</source>
<translation>Ostrzeżenie</translation>
</message>
<message>
<location filename="../qt-ui/preferences.cpp" line="395"/>
<source>If you click OK, all settings of Subsurface are reset to their default values. This will be applied immediately.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>PrintDialog</name>
<message>
<location filename="../qt-ui/printdialog.cpp" line="46"/>
<source>&amp;Preview</source>
<translation>Podgląd</translation>
</message>
<message>
<location filename="../qt-ui/printdialog.cpp" line="43"/>
<source>P&amp;rint</source>
<translation>Drukuj</translation>
</message>
<message>
<location filename="../qt-ui/printdialog.cpp" line="59"/>
<source>Print</source>
<translation>Drukuj</translation>
</message>
</context>
<context>
<name>PrintLayout</name>
<message>
<location filename="../qt-ui/printlayout.cpp" line="25"/>
<source>Dive#</source>
<translation>Nurkowanie nr</translation>
</message>
<message>
<location filename="../qt-ui/printlayout.cpp" line="26"/>
<source>Date</source>
<translation>Data</translation>
</message>
<message>
<location filename="../qt-ui/printlayout.cpp" line="27"/>
<source>Depth</source>
<translation>Głębokość</translation>
</message>
<message>
<location filename="../qt-ui/printlayout.cpp" line="28"/>
<source>Duration</source>
<translation>Czas</translation>
</message>
<message>
<location filename="../qt-ui/printlayout.cpp" line="29"/>
<source>Master</source>
<translation>Divemaster</translation>
</message>
<message>
<location filename="../qt-ui/printlayout.cpp" line="30"/>
<source>Buddy</source>
<translation>Partner</translation>
</message>
<message>
<location filename="../qt-ui/printlayout.cpp" line="31"/>
<source>Location</source>
<translation>Miejsce</translation>
</message>
</context>
<context>
<name>PrintOptions</name>
<message>
<location filename="../qt-ui/printoptions.ui" line="23"/>
<source>Print options</source>
<translation>Opcje drukowania</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="41"/>
<source>Print only selected dives</source>
<translation>Drukuj tylko zaznaczone nurkowania</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="60"/>
<source>Print in color</source>
<translation>Drukuj w kolorze</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="86"/>
<source>Print type</source>
<translation>Rodzaj wydruku</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="116"/>
<source>6 dives per page</source>
<translation>6 nurkowań na stronę</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="132"/>
<source>2 dives per page</source>
<translation>2 nurkowania na stronę</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="145"/>
<source>Table print</source>
<translation>Tabela</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="162"/>
<source>Ordering</source>
<translation>Kolejność</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="180"/>
<source>Profile on top</source>
<translation>Profil na górze</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="202"/>
<source>Notes on top</source>
<translation>Opis na górze</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="219"/>
<source>Sizing heights (% of layout)</source>
<translation>Wysokości drukowanych sekcji (% całości)</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="256"/>
<source>Profile height (43% - 85%)</source>
<translation>Profil (43% - 85%)</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="278"/>
<source>Other data height (8% - 17%)</source>
<translation>Pozostałe dane (8% - 17%)</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="338"/>
<source>Notes height (0% - 52%)</source>
<translation>Opis (0% - 52%)</translation>
</message>
<message>
<location filename="../qt-ui/printoptions.ui" line="354"/>
<location filename="../qt-ui/printoptions.ui" line="370"/>
<location filename="../qt-ui/printoptions.ui" line="386"/>
<source>0</source>
<translation>0</translation>
</message>
</context>
<context>
<name>ProfilePrintModel</name>
<message>
<location filename="../qt-ui/models.cpp" line="1878"/>
<source>unknown</source>
<translation>nieznana</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1883"/>
<source>Dive #%1 - %2</source>
<translation>Nurkownie #%1 - %2</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1886"/>
<source>Max depth: %1 %2</source>
<translation>Max głębokość: %1 %2</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1893"/>
<source>Duration: %1 min</source>
<translation>Czas: %1 min</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1898"/>
<source>Gas Used:</source>
<translation>Użyty gaz:</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1900"/>
<source>SAC:</source>
<translation>SAC:</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1902"/>
<source>Max. CNS:</source>
<translation>Max CNS:</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1904"/>
<source>Weights:</source>
<translation>Balast:</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1909"/>
<source>Notes:</source>
<translation>Opis:</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1916"/>
<source>Divemaster:</source>
<translation>Divemaster:</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1918"/>
<source>Buddy:</source>
<translation>Partner:</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1920"/>
<source>Suit:</source>
<translation>Skafander:</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1922"/>
<source>Viz:</source>
<translation>Widzialność:</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1924"/>
<source>Rating:</source>
<translation>Ocena:</translation>
</message>
</context>
<context>
<name>ProfileWidget2</name>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="525"/>
<source> (#%1 of %2)</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="904"/>
<source>Make first divecomputer</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="906"/>
<source>Delete this divecomputer</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="913"/>
<source>Add Gas Change</source>
<translation>Dodaj zmianę gazu</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="924"/>
<source>Add Bookmark</source>
<translation>Dodaj notatkę</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="928"/>
<source>Remove Event</source>
<translation>Usuń znacznik</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="933"/>
<source>Hide similar events</source>
<translation>Ukryj podobne znaczniki</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="939"/>
<source>Edit name</source>
<translation>Zmień nazwę</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="953"/>
<source>Unhide all events</source>
<translation>Odkryj wszystkie znaczniki</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="987"/>
<source>Hide events</source>
<translation>Ukrywanie wydarzeń</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="987"/>
<source>Hide all %1 events?</source>
<translation>Ukyć wszystkie wydarzenia typu %1?</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="1022"/>
<source>Remove the selected event?</source>
<translation>Usunąć wybrane wydarzenie?</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="1023"/>
<source>%1 @ %2:%3</source>
<translation>%1 @ %2:%3</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="1073"/>
<source>Edit name of bookmark</source>
<translation>Zmień nazwę wydarzenia</translation>
</message>
<message>
<location filename="../qt-ui/profile/profilewidget2.cpp" line="1074"/>
<source>Custom name:</source>
<translation>Własna nazwa:</translation>
</message>
</context>
<context>
<name>QObject</name>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="39"/>
<source>AIR</source>
<translation>POWIETRZE</translation>
</message>
<message>
<location filename="../qt-ui/diveplanner.cpp" line="210"/>
<source>Remove this Point</source>
<translation>Usuń ten punkt</translation>
</message>
<message>
<location filename="../qt-ui/kmessagewidget.cpp" line="58"/>
<source>Close</source>
<translation>Zamknij</translation>
</message>
<message>
<location filename="../qt-ui/simplewidgets.cpp" line="27"/>
<source>Average</source>
<translation>średnia</translation>
</message>
<message>
<location filename="../qt-ui/simplewidgets.cpp" line="30"/>
<source>Minimum</source>
<translation>min.</translation>
</message>
<message>
<location filename="../qt-ui/simplewidgets.cpp" line="33"/>
<source>Maximum</source>
<translation>max.</translation>
</message>
<message>
<location filename="../qt-ui/globe.cpp" line="288"/>
<source>Move the map and double-click to set the dive location</source>
<translation>Przesuń mapę i wskaż lokalizację dwuklikiem</translation>
</message>
</context>
<context>
<name>RenumberDialog</name>
<message>
<location filename="../qt-ui/renumber.ui" line="17"/>
<source>Renumber</source>
<translation>Zmień numerację</translation>
</message>
<message>
<location filename="../qt-ui/renumber.ui" line="43"/>
<location filename="../qt-ui/simplewidgets.cpp" line="128"/>
<source>New starting number</source>
<translation>Nowy numer początkowy</translation>
</message>
<message>
<location filename="../qt-ui/simplewidgets.cpp" line="126"/>
<source>New number</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>SearchBar</name>
<message>
<location filename="../qt-ui/searchbar.ui" line="14"/>
<source>Form</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>ShiftImageTimesDialog</name>
<message>
<location filename="../qt-ui/shiftimagetimes.ui" line="23"/>
<source>Shift selected times</source>
<translation>Zmiana czasów nurkowań</translation>
</message>
<message>
<location filename="../qt-ui/shiftimagetimes.ui" line="34"/>
<source>Shift times of image(s) by</source>
<translation>Przesuń czasy zdjęć o</translation>
</message>
<message>
<location filename="../qt-ui/shiftimagetimes.ui" line="95"/>
<source>h:mm</source>
<translation>h:mm</translation>
</message>
<message>
<location filename="../qt-ui/shiftimagetimes.ui" line="105"/>
<source>earlier</source>
<translation>wcześniej</translation>
</message>
<message>
<location filename="../qt-ui/shiftimagetimes.ui" line="112"/>
<source>later</source>
<translation>później</translation>
</message>
<message>
<location filename="../qt-ui/shiftimagetimes.ui" line="148"/>
<source>To compute the offset between the clocks of your dive computer and your camera use your camera to take a picture of your dive compuer displaying the current time. Download that image to your computer and press this button.</source>
<translation>Aby uwzględnić różnicę w ustawieniach zegarów komputera nurkowego i aparatu fotograficznego użyj aparatu do zrobienia zdjęcia komputera nurkowego, gdy ten wyświetla aktualny czas. Zgraj to zdjęcie na swój komputer i wciśnij ten przycisk.</translation>
</message>
<message>
<location filename="../qt-ui/shiftimagetimes.ui" line="158"/>
<source>Determine camera time offset</source>
<translation>Uwzględnij przesunięcie zegara aparatu fotograficznego</translation>
</message>
<message>
<location filename="../qt-ui/shiftimagetimes.ui" line="161"/>
<source>Select image of divecomputer showing time</source>
<translation>Wybierz zdjęcie komputera nurkowego (pokazujące aktualny czas)</translation>
</message>
<message>
<location filename="../qt-ui/shiftimagetimes.ui" line="183"/>
<source>Which date and time are displayed on the image?</source>
<translation>Jaka data i godzina jest na zdjęciu?</translation>
</message>
<message>
<location filename="../qt-ui/simplewidgets.cpp" line="224"/>
<source>Open Image File</source>
<translation>Otwórz zdjęcie</translation>
</message>
<message>
<location filename="../qt-ui/simplewidgets.cpp" line="226"/>
<source>Image Files (*.jpg *.jpeg *.pnm *.tif *.tiff)</source>
<translation>Pliki graficzne (*.jpg *.jpeg *.pnm *.tif *.tiff)</translation>
</message>
</context>
<context>
<name>ShiftTimesDialog</name>
<message>
<location filename="../qt-ui/shifttimes.ui" line="23"/>
<source>Shift selected times</source>
<translation>Zmiana czasów nurkowań</translation>
</message>
<message>
<location filename="../qt-ui/shifttimes.ui" line="49"/>
<source>Shift times of selected dives by</source>
<translation>Przesuń czasy wybranych nurkowań o</translation>
</message>
<message>
<location filename="../qt-ui/shifttimes.ui" line="72"/>
<source>Shifted time:</source>
<translation>Przesunięty czas:</translation>
</message>
<message>
<location filename="../qt-ui/shifttimes.ui" line="79"/>
<source>Current time:</source>
<translation>Aktualny czas:</translation>
</message>
<message>
<location filename="../qt-ui/shifttimes.ui" line="86"/>
<location filename="../qt-ui/shifttimes.ui" line="93"/>
<source>0:0</source>
<translation>0:0</translation>
</message>
<message>
<location filename="../qt-ui/shifttimes.ui" line="126"/>
<source>h:mm</source>
<translation>h:mm</translation>
</message>
<message>
<location filename="../qt-ui/shifttimes.ui" line="136"/>
<source>earlier</source>
<translation>wcześniej</translation>
</message>
<message>
<location filename="../qt-ui/shifttimes.ui" line="143"/>
<source>later</source>
<translation>później</translation>
</message>
</context>
<context>
<name>SubsurfaceAbout</name>
<message>
<location filename="../qt-ui/about.ui" line="23"/>
<source>About Subsurface</source>
<translation>O Subsurface</translation>
</message>
<message>
<location filename="../qt-ui/about.ui" line="80"/>
<source>&amp;License</source>
<translation>Licencja</translation>
</message>
<message>
<location filename="../qt-ui/about.ui" line="87"/>
<source>&amp;Website</source>
<translation>Strona WWW</translation>
</message>
<message>
<location filename="../qt-ui/about.ui" line="94"/>
<source>&amp;Close</source>
<translation>Zamknij</translation>
</message>
<message>
<location filename="../qt-ui/about.cpp" line="13"/>
<source>&lt;span style=&apos;font-size: 18pt; font-weight: bold;&apos;&gt;Subsurface %1 &lt;/span&gt;&lt;br&gt;&lt;br&gt;Multi-platform divelog software&lt;br&gt;&lt;span style=&apos;font-size: 8pt&apos;&gt;Linus Torvalds, Dirk Hohndel, Tomaz Canabrava, and others, 2011-2014&lt;/span&gt;</source>
<translation>&lt;span style=&apos;font-size: 18pt; font-weight: bold;&apos;&gt;Subsurface %1 &lt;/span&gt;&lt;br&gt;&lt;br&gt;Wieloplatformowy log nurkowy&lt;br&gt;&lt;span style=&apos;font-size: 8pt&apos;&gt;Linus Torvalds, Dirk Hohndel, Tomaz Canabrava i inni, 2011-2014&lt;/span&gt;</translation>
</message>
</context>
<context>
<name>SubsurfaceWebServices</name>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="337"/>
<source>Webservice</source>
<translation>Usługa Internetowa</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="400"/>
<source>Connecting...</source>
<translation>Łączenie...</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="419"/>
<source>Download finished</source>
<translation>Pobieranie zakończone</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="433"/>
<source>Download error: %1</source>
<translation>Błąd pobierania: %1</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="443"/>
<source>Connection Error: </source>
<translation>Błąd połączenia:</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="446"/>
<source>Invalid user identifier!</source>
<translation>Niepoprawny identyfikator użytkownika!</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="449"/>
<source>Cannot parse response!</source>
<translation>Nie można przetworzyć odpowiedzi!</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="452"/>
<source>Download Success!</source>
<translation>Pobieranie zakończone sukcesem!</translation>
</message>
</context>
<context>
<name>TableView</name>
<message>
<location filename="../qt-ui/tableview.cpp" line="23"/>
<source>Add Cylinder</source>
<translation>Dodaj butlę</translation>
</message>
</context>
<context>
<name>TankInfoModel</name>
<message>
<location filename="../qt-ui/models.cpp" line="850"/>
<source>Description</source>
<translation>Opis</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="850"/>
<source>ml</source>
<translation>ml</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="850"/>
<source>bar</source>
<translation>bar</translation>
</message>
</context>
<context>
<name>ToolTipItem</name>
<message>
<location filename="../qt-ui/profile/divetooltipitem.cpp" line="129"/>
<source>Information</source>
<translation>Informacje</translation>
</message>
</context>
<context>
<name>UpdateManager</name>
<message>
<location filename="../qt-ui/updatemanager.cpp" line="35"/>
<source>Check for updates.</source>
<translation>Sprawdzanie dostępności aktualizacji.</translation>
</message>
<message>
<location filename="../qt-ui/updatemanager.cpp" line="36"/>
<source>Subsurface was unable to check for updates.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/updatemanager.cpp" line="41"/>
<source>The following error occurred:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/updatemanager.cpp" line="42"/>
<source>Please check your internet connection.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/updatemanager.cpp" line="51"/>
<source>You are using the latest version of subsurface.</source>
<translation>Używasz najnowszej wersji Subsurface.</translation>
</message>
<message>
<location filename="../qt-ui/updatemanager.cpp" line="53"/>
<source>A new version of subsurface is available.&lt;br/&gt;Click on:&lt;br/&gt;&lt;a href=&quot;%1&quot;&gt;%1&lt;/a&gt;&lt;br/&gt; to download it.</source>
<translation>Nowa wersja Subsurface jest dostępna.&lt;br/&gt;Kliknij na:&lt;br/&gt;&lt;a href=&quot;%1&quot;&gt;%1&lt;/a&gt;&lt;br/&gt; aby ją pobrać.</translation>
</message>
<message>
<location filename="../qt-ui/updatemanager.cpp" line="56"/>
<source>&lt;b&gt;A new version of subsurface is available.&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;%1</source>
<translation>&lt;b&gt;Nowsza wersja Subsurface jest dostępna.&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;%1</translation>
</message>
<message>
<location filename="../qt-ui/updatemanager.cpp" line="59"/>
<source>There was an error while trying to check for updates.&lt;br/&gt;&lt;br/&gt;%1</source>
<translation>Wystapił błąd podczas sprawdzania dostępności aktualizaji.&lt;br/&gt;&lt;br/&gt;%1</translation>
</message>
</context>
<context>
<name>UserManual</name>
<message>
<location filename="../qt-ui/usermanual.cpp" line="55"/>
<source>User Manual</source>
<translation>instrukcja obsługi</translation>
</message>
<message>
<location filename="../qt-ui/usermanual.cpp" line="69"/>
<location filename="../qt-ui/usermanual.cpp" line="75"/>
<source>Cannot find the Subsurface manual</source>
<translation>Nie można znaleźć dokumentacji Subsurface</translation>
</message>
</context>
<context>
<name>UserSurvey</name>
<message>
<location filename="../qt-ui/usersurvey.ui" line="14"/>
<source>Dialog</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="47"/>
<source>Subsurface User Survey</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="60"/>
<source>We would love to learn more about our users, their preferences and their usage habits. Please take a minute to fill out this form and submit it to the Subsurface team. Please select all options that apply to you.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="79"/>
<source>Recreational DIver</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="92"/>
<source>Tech Diver</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="105"/>
<source>Interested in dive planning</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="118"/>
<source>I am downloading dives from supported dive computer</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="131"/>
<source>I am importing dives from other software / sources</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="144"/>
<source>I am manually entering dives</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="167"/>
<source>I use the Android companion app to track dive locations</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="190"/>
<source>Please type suggestions (in English) in the following box</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.ui" line="203"/>
<source>The following information about your system will also be submitted</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="27"/>
<source>
Operating System: %1</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="30"/>
<source>
CPU Architecture: %1</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="35"/>
<source>
OS CPU Architecture %1</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="39"/>
<source>
Language: %1</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="73"/>
<source>Should we ask you later?</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="74"/>
<source>Don&apos;t ask me again</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="75"/>
<source>Ask Later</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="76"/>
<source>Ask again?</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="95"/>
<source>Submit User Survey.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="96"/>
<source>Subsurface was unable to submit the user survey.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="101"/>
<source>The following error occurred:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="102"/>
<source>Please check your internet connection.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="111"/>
<source>Survey successfully submitted.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/usersurvey.cpp" line="116"/>
<source>There was an error while trying to check for updates.&lt;br/&gt;&lt;br/&gt;%1</source>
<translation>Wystapił błąd podczas sprawdzania dostępności aktualizaji.&lt;br/&gt;&lt;br/&gt;%1</translation>
</message>
</context>
<context>
<name>WSInfoModel</name>
<message>
<location filename="../qt-ui/models.cpp" line="721"/>
<source>Description</source>
<translation>Opis</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="721"/>
<source>kg</source>
<translation>kg</translation>
</message>
</context>
<context>
<name>WebServices</name>
<message>
<location filename="../qt-ui/webservices.ui" line="14"/>
<source>Webservice Connection</source>
<translation>Połączenie z usługą internetową</translation>
</message>
<message>
<location filename="../qt-ui/webservices.ui" line="25"/>
<source>Status:</source>
<translation>Status:</translation>
</message>
<message>
<location filename="../qt-ui/webservices.ui" line="32"/>
<source>Enter your ID here</source>
<translation>Podaj swoje ID</translation>
</message>
<message>
<location filename="../qt-ui/webservices.ui" line="44"/>
<source>Download</source>
<translation>Pobierz</translation>
</message>
<message>
<location filename="../qt-ui/webservices.ui" line="68"/>
<source>User ID</source>
<translation>ID użytkownika</translation>
</message>
<message>
<location filename="../qt-ui/webservices.ui" line="85"/>
<source>Save User ID locally?</source>
<translation>Zapisywać ID użytkownika?</translation>
</message>
<message>
<location filename="../qt-ui/webservices.ui" line="92"/>
<source>Password</source>
<translation>Hasło</translation>
</message>
<message>
<location filename="../qt-ui/webservices.ui" line="106"/>
<source>Upload</source>
<translation>Wyślij</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="256"/>
<source>Operation timed out</source>
<translation>Przekroczony czas</translation>
</message>
<message>
<location filename="../qt-ui/subsurfacewebservices.cpp" line="277"/>
<source>Transfering data...</source>
<translation>Przesyłanie danych...</translation>
</message>
</context>
<context>
<name>WeightModel</name>
<message>
<location filename="../qt-ui/models.cpp" line="373"/>
<source>Type</source>
<translation>Rodzaj</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="373"/>
<source>Weight</source>
<translation>Balast</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="433"/>
<source>Clicking here will remove this weigthsystem.</source>
<translation>Kliknięcie tu usunie ten balast z listy.</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="458"/>
<source>kg</source>
<translation>kg</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="459"/>
<source>lbs</source>
<translation>lbs</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="483"/>
<source>ft</source>
<translation>ft</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="484"/>
<source>m</source>
<translation>m</translation>
</message>
</context>
<context>
<name>YearlyStatisticsModel</name>
<message>
<location filename="../qt-ui/models.cpp" line="1637"/>
<source>Year
&gt; Month / Trip</source>
<translation>Rok
&gt; Miesiąc / grupa</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1640"/>
<source>#</source>
<translation>#</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1643"/>
<source>Duration
Total</source>
<translation>Czas trwania
całkowity</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1646"/>
<source>
Average</source>
<translation>średni</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1649"/>
<source>
Shortest</source>
<translation>najkrótszy</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1652"/>
<source>
Longest</source>
<translation>najdłuższy</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1655"/>
<source>Depth (%1)
Average</source>
<translation>Głębokość (%1)
średnia</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1658"/>
<location filename="../qt-ui/models.cpp" line="1667"/>
<location filename="../qt-ui/models.cpp" line="1676"/>
<source>
Minimum</source>
<translation>minimalna</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1661"/>
<location filename="../qt-ui/models.cpp" line="1670"/>
<location filename="../qt-ui/models.cpp" line="1679"/>
<source>
Maximum</source>
<translation>maksymalna</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1664"/>
<source>SAC (%1)
Average</source>
<translation>SAC (%1)
średni</translation>
</message>
<message>
<location filename="../qt-ui/models.cpp" line="1673"/>
<source>Temp. (%1)
Average</source>
<translation>Temperatura (%1)
średnia</translation>
</message>
</context>
<context>
<name>gettextFromC</name>
<message>
<location filename="../dive.c" line="87"/>
<source>pascal</source>
<translation>pascal</translation>
</message>
<message>
<location filename="../dive.c" line="92"/>
<location filename="../qt-gui.cpp" line="323"/>
<source>bar</source>
<translation>bar</translation>
</message>
<message>
<location filename="../dive.c" line="96"/>
<location filename="../qt-gui.cpp" line="326"/>
<source>psi</source>
<translation>psi</translation>
</message>
<message>
<location filename="../dive.c" line="138"/>
<source>cuft</source>
<translation>cuft</translation>
</message>
<message>
<location filename="../dive.c" line="167"/>
<location filename="../qt-gui.cpp" line="205"/>
<location filename="../qt-gui.cpp" line="220"/>
<location filename="../worldmap-save.c" line="44"/>
<source>m</source>
<translation>m</translation>
</message>
<message>
<location filename="../dive.c" line="172"/>
<location filename="../qt-gui.cpp" line="208"/>
<location filename="../qt-gui.cpp" line="222"/>
<source>ft</source>
<translation>ft</translation>
</message>
<message>
<location filename="../dive.c" line="217"/>
<location filename="../qt-gui.cpp" line="231"/>
<location filename="../qt-gui.cpp" line="241"/>
<source>lbs</source>
<translation>lbs</translation>
</message>
<message>
<location filename="../dive.c" line="221"/>
<location filename="../qt-gui.cpp" line="229"/>
<location filename="../qt-gui.cpp" line="239"/>
<source>kg</source>
<translation>kg</translation>
</message>
<message>
<location filename="../dive.c" line="1237"/>
<source>(%s) or (%s)</source>
<translation>(%s) lub (%s)</translation>
</message>
<message>
<location filename="../divelist.c" line="467"/>
<location filename="../equipment.c" line="104"/>
<location filename="../planner.c" line="976"/>
<location filename="../planner.c" line="979"/>
<location filename="../statistics.c" line="355"/>
<source>air</source>
<translation>powietrze</translation>
</message>
<message>
<location filename="../equipment.c" line="210"/>
<source>integrated</source>
<translation>zintegrowany</translation>
</message>
<message>
<location filename="../equipment.c" line="211"/>
<source>belt</source>
<translation>pas balastowy</translation>
</message>
<message>
<location filename="../equipment.c" line="212"/>
<source>ankle</source>
<translation>na kostkach</translation>
</message>
<message>
<location filename="../equipment.c" line="213"/>
<source>backplate weight</source>
<translation>na płycie</translation>
</message>
<message>
<location filename="../equipment.c" line="214"/>
<source>clip-on</source>
<translation>doczepiany</translation>
</message>
<message>
<location filename="../file.c" line="106"/>
<location filename="../file.c" line="369"/>
<source>Failed to read &apos;%s&apos;</source>
<translation>Błąd odczytu &apos;%s&apos;</translation>
</message>
<message>
<location filename="../file.c" line="406"/>
<location filename="../file.c" line="482"/>
<source>Maximum number of supported columns on CSV import is %d</source>
<translation>Maksymalna ilość kolumn danych przy imporcie CSV to %d</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="144"/>
<source>none</source>
<translation>brak</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="144"/>
<source>deco stop</source>
<translation>przystanek deco</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="144"/>
<source>rbt</source>
<translation>pozostały czas denny</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="144"/>
<source>ascent</source>
<translation>wynurzanie</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="144"/>
<source>ceiling</source>
<translation>sufit</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="144"/>
<source>workload</source>
<translation>wysiłek</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="145"/>
<source>transmitter</source>
<translation>nadajnik</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="145"/>
<source>violation</source>
<translation>naruszenie</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="145"/>
<source>bookmark</source>
<translation>notatka</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="145"/>
<source>surface</source>
<translation>powierzchnia</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="145"/>
<source>safety stop</source>
<translation>przystanek bezpieczeństwa</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="146"/>
<location filename="../libdivecomputer.c" line="149"/>
<source>gaschange</source>
<translation>zmiana gazu</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="146"/>
<source>safety stop (voluntary)</source>
<translation>przystanek bezpieczeństwa (opcjonalny)</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="146"/>
<source>safety stop (mandatory)</source>
<translation>przystanek bezpieczeństwa (obowiązkowy)</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="147"/>
<source>deepstop</source>
<translation>deepstop</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="147"/>
<source>ceiling (safety stop)</source>
<translation>sufit (przystanek bezpieczeństwa)</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="147"/>
<source>divetime</source>
<translation>czas nurkowania</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="147"/>
<source>below floor</source>
<comment>event showing dive is below deco floor and adding deco time</comment>
<translation>poniżej podłogi deco</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="148"/>
<source>maxdepth</source>
<translation>Max głębokość</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="148"/>
<source>OLF</source>
<translation>OLF</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="148"/>
<source>PO2</source>
<translation>PO2</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="148"/>
<source>airtime</source>
<translation>Pozostały czas oddychania</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="148"/>
<source>rgbm</source>
<translation>rgbm</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="148"/>
<source>heading</source>
<translation>kierunek</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="149"/>
<source>tissue level warning</source>
<translation>Ostrzeżenie: poziom nasycenia tkanek</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="149"/>
<source>non stop time</source>
<translation>czas bezdekompresyjny</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="166"/>
<source>invalid event number</source>
<translation>niepoprawny znacznik</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="408"/>
<source>Unable to create parser for %s %s</source>
<translation>Nie udało się utworzyć parsera dla %s %s</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="414"/>
<source>Error registering the data</source>
<translation>Błąd podczas przetwarzania danych</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="422"/>
<source>Error parsing the datetime</source>
<translation>Błąd podczas przetwarzania daty i czasu</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="438"/>
<source>Dive %d: %s %d %04d</source>
<translation>Nurkowanie %d: %s %d %04d</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="443"/>
<source>Error parsing the divetime</source>
<translation>Błąd podczas przetwarzania czasu nurkowania</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="452"/>
<source>Error parsing the maxdepth</source>
<translation>Błąd podczas przetwarzania głębokości</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="461"/>
<source>Error parsing the gas mix count</source>
<translation>Błąd podczas przetwarzania danych o ilości użytych rodzajów gazu</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="473"/>
<source>Error obtaining water salinity</source>
<translation>Błąd podczas przetwarzania danych o zasoleniu</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="481"/>
<source>Error obtaining surface pressure</source>
<translation>Błąd podczas przetwarzania danych o cienieniu atmosferycznym</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="489"/>
<source>Error parsing the gas mix</source>
<translation>Błąd podczas przetwarzania danych o użytym rodzaju gazu</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="496"/>
<source>Error parsing the samples</source>
<translation>Błąd podczas przetwarzania próbek</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="626"/>
<source>Event: waiting for user action</source>
<translation>Oczekiwanie na działanie użytkownika</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="634"/>
<source>model=%u (0x%08x), firmware=%u (0x%08x), serial=%u (0x%08x)</source>
<translation>model=%u (0x%08x), firmware=%u (0x%08x), numer seryjny=%u (0x%08x)</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="694"/>
<source>Error registering the event handler.</source>
<translation>Błąd rejestracji uchwytu (event handler)</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="699"/>
<source>Error registering the cancellation handler.</source>
<translation>Błąd rejestracji uchwytu (cancellation handler)</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="720"/>
<source>Dive data import error</source>
<translation>Błąd podczas importowania danych</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="759"/>
<source>Unable to create libdivecomputer context</source>
<translation>Nie można utworzyć kontekstu libdivecomputer</translation>
</message>
<message>
<location filename="../libdivecomputer.c" line="766"/>
<source>Unable to open %s %s (%s)</source>
<translation>Nie udało się otworzyć %s %s (%s)</translation>
</message>
<message>
<location filename="../parse-xml.c" line="466"/>
<source>Strange percentage reading %s
</source>
<translation>Podejrzany skład procentowy %s
</translation>
</message>
<message>
<location filename="../parse-xml.c" line="1683"/>
<source>Failed to parse &apos;%s&apos;</source>
<translation>Nie udało się przetworzyć &apos;%s&apos;</translation>
</message>
<message>
<location filename="../parse-xml.c" line="1904"/>
<source>Database query get_events failed.
</source>
<translation>Zapytanie bazy danych get_events nie powiodło się.⏎
</translation>
</message>
<message>
<location filename="../parse-xml.c" line="1911"/>
<source>Database query get_tags failed.
</source>
<translation>Zapytanie bazy danych get_tags nie powiodło się.
</translation>
</message>
<message>
<location filename="../file.c" line="166"/>
<source>Database connection failed '%s'.
</source>
<translation>Błąd połączenia z bazą danych &apos;%s&apos;.⏎
</translation>
</message>
<message>
<location filename="../parse-xml.c" line="1945"/>
<location filename="../parse-xml.c" line="2092"/>
<source>Database query failed '%s'.
</source>
<translation>Błąd komunikacji z bazą danych &apos;%s&apos;.
</translation>
</message>
<message>
<location filename="../parse-xml.c" line="2056"/>
<source>Database query get_cylinders failed.
</source>
<translation>Zapytanie bazy danych get_cylinders nie powiodło się.
</translation>
</message>
<message>
<location filename="../parse-xml.c" line="2063"/>
<source>Database query get_changes failed.
</source>
<translation>Zapytanie bazy danych get_changes nie powiodło się.
</translation>
</message>
<message>
<location filename="../parse-xml.c" line="2070"/>
<source>Database query get_profile_sample failed.
</source>
<translation>Zapytanie bazy danych get_profile_sample nie powiodło się.
</translation>
</message>
<message>
<location filename="../parse-xml.c" line="2161"/>
<source>Can&apos;t open stylesheet %s</source>
<translation>Nie można otworzyć arkusza stylów %s</translation>
</message>
<message>
<location filename="../equipment.c" line="106"/>
<source>EAN%d</source>
<translation>EAN%d</translation>
</message>
<message>
<location filename="../planner.c" line="159"/>
<location filename="../planner.c" line="752"/>
<source>Can&apos;t find gas %s</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="345"/>
<source>Too many gas mixes</source>
<translation>Zbyt wiele rodzajów gazu</translation>
</message>
<message>
<location filename="../planner.c" line="526"/>
<source>DISCLAIMER / WARNING: THIS IS A NEW IMPLEMENTATION OF THE BUHLMANN ALGORITHM AND A DIVE PLANNER IMPLEMENTION BASED ON THAT WHICH HAS RECEIVED ONLY A LIMITED AMOUNT OF TESTING. WE STRONGLY RECOMMEND NOT TO PLAN DIVES SIMPLY BASED ON THE RESULTS GIVEN HERE.</source>
<translation>OSTRZEŻENIE: TEN PLANER POSŁUGUJE SIĘ IMPLEMENTACJĄ ALGORYTMU BUHLMANNA, KTÓRA JEST NOWA I ZOSTAŁA PRZETESTOWANA W BARDZO OGRANICZONYM ZAKRESIE. ZDECYDOWANIE ODRADZAMY PLANOWANIE NURKOWANIA JEDYNIE W OPARCIU O REZULTATY DZIAŁANIA TEGO PROGRAMU.</translation>
</message>
<message>
<location filename="../planner.c" line="535"/>
<source>based on GFlow = %d and GFhigh = %d</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="538"/>
<source>Subsurface dive plan</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="542"/>
<source>depth</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="545"/>
<source>runtime</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="548"/>
<source>duration</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="551"/>
<source>gas</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="585"/>
<source>Transition to %.*f %s in %d:%02d min - runtime %d:%02u on %s</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="595"/>
<source>Stay at %.*f %s for %d:%02d min - runtime %d:%02u on %s</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="606"/>
<source>%3.0f%s</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="609"/>
<location filename="../planner.c" line="613"/>
<source>%3dmin</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="629"/>
<source>Switch gas to %s</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="638"/>
<source>Gas consumption:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="658"/>
<location filename="../planner.c" line="663"/>
<location filename="../planner.c" line="686"/>
<source>Warning:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="659"/>
<source>this is more gas than available in the specified cylinder!</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="664"/>
<source>not enough reserve for gas sharing on ascent!</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="666"/>
<source>%.0f%s/%.0f%s of %s (%.0f%s/%.0f%s in planned ascent)</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="668"/>
<source>%.0f%s (%.0f%s during planned ascent) of %s</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="683"/>
<source>high pO₂ value %.2f at %d:%02u with gas %s at depth %.*f %s</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../planner.c" line="980"/>
<source>ean</source>
<translation>ean</translation>
</message>
<message>
<location filename="../profile.c" line="1250"/>
<source>@: %d:%02d
D: %.1f%s
</source>
<translation>@: %d:%02d
D: %.1f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1253"/>
<source>P: %d%s
</source>
<translation>P: %d%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1257"/>
<source>T: %.1f%s
</source>
<translation>T: %.1f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1263"/>
<source>V: %.1f%s
</source>
<translation>V: %.1f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1266"/>
<source>SAC: %.*f%s/min
</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../profile.c" line="1268"/>
<source>CNS: %u%%
</source>
<translation>CNS: %u%%
</translation>
</message>
<message>
<location filename="../profile.c" line="1270"/>
<source>pO%s: %.2fbar
</source>
<translation>pO%s: %.2fbar
</translation>
</message>
<message>
<location filename="../profile.c" line="1272"/>
<source>pN%s: %.2fbar
</source>
<translation>pN%s: %.2fbar
</translation>
</message>
<message>
<location filename="../profile.c" line="1274"/>
<source>pHe: %.2fbar
</source>
<translation>pHe: %.2fbar
</translation>
</message>
<message>
<location filename="../profile.c" line="1277"/>
<source>MOD: %d%s
</source>
<translation>MOD: %d%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1284"/>
<source>EAD: %d%s
EADD: %d%s
</source>
<translation>EAD: %d%s
EADD: %d%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1288"/>
<source>END: %d%s
EADD: %d%s
</source>
<translation>END: %d%s
EADD: %d%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1300"/>
<source>Safetystop: %umin @ %.0f%s
</source>
<translation>Przystanek bezp.: %umin @ %.0f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1303"/>
<source>Safetystop: unkn time @ %.0f%s
</source>
<translation>Przystanek bezp.: nieznany czas @ %.0f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1308"/>
<source>Deco: %umin @ %.0f%s
</source>
<translation>Deco: %umin @ %.0f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1311"/>
<source>Deco: unkn time @ %.0f%s
</source>
<translation>Deco: nieznany czas @ %.0f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1315"/>
<source>In deco
</source>
<translation>dekompresja
</translation>
</message>
<message>
<location filename="../profile.c" line="1317"/>
<source>NDL: %umin
</source>
<translation>NDL: %umin
</translation>
</message>
<message>
<location filename="../profile.c" line="1321"/>
<source>Deco: %umin @ %.0f%s (calc)
</source>
<translation>Deco: %umin @ %.0f%s (obliczone)
</translation>
</message>
<message>
<location filename="../profile.c" line="1329"/>
<source>In deco (calc)
</source>
<translation>dekompresja (obliczone)
</translation>
</message>
<message>
<location filename="../profile.c" line="1331"/>
<source>NDL: %umin (calc)
</source>
<translation>NDL: %umin (calc)
</translation>
</message>
<message>
<location filename="../profile.c" line="1334"/>
<source>TTS: %umin (calc)
</source>
<translation>TTS: %umin (calc)
</translation>
</message>
<message>
<location filename="../profile.c" line="1337"/>
<source>Calculated ceiling %.0f%s
</source>
<translation>Obliczony sufit: %.0f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1343"/>
<source>Tissue %.0fmin: %.0f%s
</source>
<translation>Tkanka %.0fmin: %.0f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1349"/>
<source>heartbeat: %d
</source>
<translation>tętno: %d
</translation>
</message>
<message>
<location filename="../profile.c" line="1351"/>
<source>bearing: %d
</source>
<translation>kurs: %d
</translation>
</message>
<message>
<location filename="../profile.c" line="1443"/>
<source>%sT: %d:%02d min</source>
<translation>%sT: %d:%02d min</translation>
</message>
<message>
<location filename="../profile.c" line="1447"/>
<location filename="../profile.c" line="1451"/>
<location filename="../profile.c" line="1455"/>
<source>%s %sD:%.1f%s</source>
<translation>%s %sGł:%.1f%s</translation>
</message>
<message>
<location filename="../profile.c" line="1459"/>
<source>%s %sD:%.1f%s
</source>
<translation>%s %sGł:%.1f%s
</translation>
</message>
<message>
<location filename="../profile.c" line="1463"/>
<source>%s%sV:%.2f%s</source>
<translation>%s%sV:%.2f%s</translation>
</message>
<message>
<location filename="../profile.c" line="1467"/>
<location filename="../profile.c" line="1471"/>
<source>%s %sV:%.2f%s</source>
<translation>%s %sV:%.2f%s</translation>
</message>
<message>
<location filename="../profile.c" line="1478"/>
<source>%s %sP:%d %s</source>
<translation>%s %sP:%d %s</translation>
</message>
<message>
<location filename="../qt-gui.cpp" line="281"/>
<source>C</source>
<translation>C</translation>
</message>
<message>
<location filename="../qt-gui.cpp" line="284"/>
<source>F</source>
<translation>F</translation>
</message>
<message>
<location filename="../qt-gui.cpp" line="417"/>
<source>%1 %2 (%3 dives)</source>
<translation>%1 %2 (%3 dives)</translation>
</message>
<message>
<location filename="../qt-gui.cpp" line="422"/>
<source>%1 %2 (1 dive)</source>
<translation>%1 %2 (1 nurkowanie)</translation>
</message>
<message>
<location filename="../dive.c" line="19"/>
<source>boat</source>
<translation>z łodzi</translation>
</message>
<message>
<location filename="../dive.c" line="19"/>
<source>shore</source>
<translation>z brzegu</translation>
</message>
<message>
<location filename="../dive.c" line="19"/>
<source>drift</source>
<translation>dryf</translation>
</message>
<message>
<location filename="../dive.c" line="20"/>
<source>deep</source>
<translation>głębokie</translation>
</message>
<message>
<location filename="../dive.c" line="20"/>
<source>cavern</source>
<translation>kawerna</translation>
</message>
<message>
<location filename="../dive.c" line="20"/>
<source>ice</source>
<translation>podlodowe</translation>
</message>
<message>
<location filename="../dive.c" line="21"/>
<source>wreck</source>
<translation>wrakowe</translation>
</message>
<message>
<location filename="../dive.c" line="21"/>
<source>cave</source>
<translation>jaskiniowe</translation>
</message>
<message>
<location filename="../dive.c" line="21"/>
<source>altitude</source>
<translation>wysokość</translation>
</message>
<message>
<location filename="../dive.c" line="22"/>
<source>pool</source>
<translation>basen</translation>
</message>
<message>
<location filename="../dive.c" line="22"/>
<source>lake</source>
<translation>jezioro</translation>
</message>
<message>
<location filename="../dive.c" line="22"/>
<source>river</source>
<translation>rzeka</translation>
</message>
<message>
<location filename="../dive.c" line="23"/>
<source>night</source>
<translation>nocne</translation>
</message>
<message>
<location filename="../dive.c" line="23"/>
<source>fresh</source>
<translation>słodka</translation>
</message>
<message>
<location filename="../dive.c" line="23"/>
<source>student</source>
<translation>uczeń</translation>
</message>
<message>
<location filename="../dive.c" line="24"/>
<source>photo</source>
<translation>fotografia</translation>
</message>
<message>
<location filename="../dive.c" line="24"/>
<source>video</source>
<translation>video</translation>
</message>
<message>
<location filename="../dive.c" line="24"/>
<source>instructor</source>
<translation>instruktor</translation>
</message>
<message>
<location filename="../dive.c" line="25"/>
<source>deco</source>
<translation>deco</translation>
</message>
<message>
<location filename="../dive.c" line="133"/>
<source>ℓ</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../statistics.c" line="214"/>
<source>more than %d days</source>
<translation>więcej niż %d dni</translation>
</message>
<message>
<location filename="../statistics.c" line="220"/>
<source>%dd %dh %dmin</source>
<translation>%dd %dh %dmin</translation>
</message>
<message>
<location filename="../statistics.c" line="222"/>
<source>%dh %dmin</source>
<translation>%dh %dmin</translation>
</message>
<message>
<location filename="../statistics.c" line="234"/>
<source>for dives #</source>
<translation>dla nurkowania nr</translation>
</message>
<message>
<location filename="../statistics.c" line="240"/>
<source>for selected dives</source>
<translation>dla wybranych nurkowań</translation>
</message>
<message>
<location filename="../statistics.c" line="275"/>
<source>for dive #%d</source>
<translation>dla nurkowania #%d</translation>
</message>
<message>
<location filename="../statistics.c" line="277"/>
<source>for selected dive</source>
<translation>dla wybranego nurkowania</translation>
</message>
<message>
<location filename="../statistics.c" line="279"/>
<source>for all dives</source>
<translation>dla wszystkich nurkowań</translation>
</message>
<message>
<location filename="../statistics.c" line="281"/>
<source>(no dives)</source>
<translation>(brak nurkowań)</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="75"/>
<source>Sun</source>
<translation>Nie</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="75"/>
<source>Mon</source>
<translation>Pon</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="75"/>
<source>Tue</source>
<translation>Wto</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="75"/>
<source>Wed</source>
<translation>Śro</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="75"/>
<source>Thu</source>
<translation>Czw</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="75"/>
<source>Fri</source>
<translation>Pią</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="75"/>
<source>Sat</source>
<translation>Sob</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="84"/>
<source>Jan</source>
<translation>Sty</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="84"/>
<source>Feb</source>
<translation>Lut</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="84"/>
<source>Mar</source>
<translation>Mar</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="84"/>
<source>Apr</source>
<translation>Kwi</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="84"/>
<source>May</source>
<translation>Maj</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="84"/>
<source>Jun</source>
<translation>Cze</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="85"/>
<source>Jul</source>
<translation>Lip</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="85"/>
<source>Aug</source>
<translation>Sie</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="85"/>
<source>Sep</source>
<translation>Wrz</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="85"/>
<source>Oct</source>
<translation>Paź</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="85"/>
<source>Nov</source>
<translation>Lis</translation>
</message>
<message>
<location filename="../subsurfacestartup.c" line="85"/>
<source>Dec</source>
<translation>Gru</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="24"/>
<source>Uemis Zurich: File System is almost full
Disconnect/reconnect the dive computer
and click &apos;Retry&apos;</source>
<translation>Uemis Zurich: System plików jest prawie pełen
Odłącz i podłącz ponownie komputer nurkowy
i wybierz &apos;Ponów&apos;</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="25"/>
<source>Uemis Zurich: File System is full
Disconnect/reconnect the dive computer
and try again</source>
<translation>Uemis Zurich: System plików jest pełen
Odłącz i podłącz ponownie komputer nurkowy
i spróbuj jeszcze raz.</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="26"/>
<source>Short write to req.txt file
Is the Uemis Zurich plugged in correctly?</source>
<translation>Nieudany zapis do pliku req.txt
Czy Uemis Zurich jest podłączony poprawnie?</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="111"/>
<source>unknown</source>
<translation>nieznana</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="383"/>
<source>Reading %s %s</source>
<translation>Czytanie %s %s</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="403"/>
<source>data</source>
<translation>dane</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="424"/>
<source>divelog entry id</source>
<translation>wpis dziennika nurkowego id</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="426"/>
<source>divespot data id</source>
<translation>dane o miejscu nurkowania</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="428"/>
<source>more data dive id</source>
<translation>dane nurkowania id</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="622"/>
<source>wetsuit</source>
<translation>mokry</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="622"/>
<source>semidry</source>
<translation>półsuchy</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="622"/>
<source>drysuit</source>
<translation>suchy</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="623"/>
<source>shorty</source>
<translation>krótki</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="623"/>
<source>vest</source>
<translation>kamizelka</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="623"/>
<source>long john</source>
<translation>długi</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="623"/>
<source>jacket</source>
<translation>kurtka</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="623"/>
<source>full suit</source>
<translation>pełna</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="623"/>
<source>2 pcs full suit</source>
<translation>pełna dwuczęściowa</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="624"/>
<source>membrane</source>
<translation>membranowy</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="823"/>
<source>Init Communication</source>
<translation>Nawiązywanie łączności</translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="825"/>
<source>Uemis init failed</source>
<translation>Błąd inicjalizacji Uemis </translation>
</message>
<message>
<location filename="../uemis-downloader.c" line="836"/>
<source>Start download</source>
<translation>Rozpocznij pobieranie</translation>
</message>
<message>
<location filename="../uemis.c" line="196"/>
<source>Safety Stop Violation</source>
<translation>Pominięcie przystanku bezpieczeństwa</translation>
</message>
<message>
<location filename="../uemis.c" line="198"/>
<source>Speed Alarm</source>
<translation>Alarm prędkości wynurzania</translation>
</message>
<message>
<location filename="../uemis.c" line="201"/>
<source>Speed Warning</source>
<translation>Ostrzeżenie: prędkość wynurzania</translation>
</message>
<message>
<location filename="../uemis.c" line="203"/>
<source>pO₂ Green Warning</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../uemis.c" line="206"/>
<source>pO₂ Ascend Warning</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../uemis.c" line="208"/>
<source>pO₂ Ascend Alarm</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../uemis.c" line="212"/>
<source>Tank Pressure Info</source>
<translation>Ciśnienie w butli</translation>
</message>
<message>
<location filename="../uemis.c" line="214"/>
<source>RGT Warning</source>
<translation>Ostrzeżenie: ilość gazu</translation>
</message>
<message>
<location filename="../uemis.c" line="216"/>
<source>RGT Alert</source>
<translation>Alarm: ilość gazu</translation>
</message>
<message>
<location filename="../uemis.c" line="218"/>
<source>Tank Change Suggested</source>
<translation>Zalecana zmiana gazu</translation>
</message>
<message>
<location filename="../uemis.c" line="220"/>
<source>Depth Limit Exceeded</source>
<translation>Przekroczenie limitu głębokości</translation>
</message>
<message>
<location filename="../uemis.c" line="222"/>
<source>Max Deco Time Warning</source>
<translation>Ostrzeżenie: maksymalny czas dekompresji</translation>
</message>
<message>
<location filename="../uemis.c" line="224"/>
<source>Dive Time Info</source>
<translation>Informacja: czas nurkowania</translation>
</message>
<message>
<location filename="../uemis.c" line="226"/>
<source>Dive Time Alert</source>
<translation>Alarm: czas nurkowania</translation>
</message>
<message>
<location filename="../uemis.c" line="228"/>
<source>Marker</source>
<translation>Znacznik</translation>
</message>
<message>
<location filename="../uemis.c" line="230"/>
<source>No Tank Data</source>
<translation>Brak danych o butli</translation>
</message>
<message>
<location filename="../uemis.c" line="232"/>
<source>Low Battery Warning</source>
<translation>Ostrzeżenie: niski poziom baterii</translation>
</message>
<message>
<location filename="../uemis.c" line="234"/>
<source>Low Battery Alert</source>
<translation>Alarm: niski poziom baterii</translation>
</message>
<message>
<location filename="../save-html.c" line="272"/>
<location filename="../worldmap-save.c" line="106"/>
<source>Can&apos;t open file %s</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../worldmap-save.c" line="36"/>
<source>Date:</source>
<translation>Data:</translation>
</message>
<message>
<location filename="../worldmap-save.c" line="38"/>
<source>Time:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../worldmap-save.c" line="40"/>
<source>Duration:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../worldmap-save.c" line="41"/>
<source>min</source>
<translation>min</translation>
</message>
<message>
<location filename="../worldmap-save.c" line="43"/>
<source>Max Depth:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../worldmap-save.c" line="46"/>
<source>Air Temp:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../worldmap-save.c" line="48"/>
<source>Water Temp:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../worldmap-save.c" line="50"/>
<source>Location:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../worldmap-save.c" line="54"/>
<source>Notes:</source>
<translation>Opis:</translation>
</message>
</context>
<context>
<name>plannerSettingsWidget</name>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="14"/>
<source>Form</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="35"/>
<source>Rates</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="56"/>
<source>Ascent</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="77"/>
<source>below 75% avg. depth</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="84"/>
<location filename="../qt-ui/plannerSettings.ui" line="101"/>
<location filename="../qt-ui/plannerSettings.ui" line="118"/>
<location filename="../qt-ui/plannerSettings.ui" line="135"/>
<location filename="../qt-ui/plannerSettings.ui" line="181"/>
<source>m/min</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="94"/>
<source>75%-50% avg. depth</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="111"/>
<source>50% avg. depth - 6m/20ft</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="128"/>
<source>6m/20ft to surface</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="148"/>
<source>Descent</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="200"/>
<source>surface to the bottom</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="226"/>
<source>Planning</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="247"/>
<source>GF low</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="264"/>
<source>GF high</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="281"/>
<source>Drop to first depth</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="288"/>
<source>Last Stop at 6m/20ft</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="295"/>
<source>plan backgas breaks</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="318"/>
<source>Gas Options</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="339"/>
<source>bottom SAC</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="349"/>
<source>deco SAC</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="359"/>
<source>bottom pO₂</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="366"/>
<location filename="../qt-ui/plannerSettings.ui" line="389"/>
<source>bar</source>
<translation>bar</translation>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="382"/>
<source>deco pO₂</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="421"/>
<source>Dive Notes</source>
<translation>Opis nurkowania</translation>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="442"/>
<source>In dive plan, show runtime (absolute time) of stops</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="445"/>
<source>display runtime</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="458"/>
<source>In dive plan, show duration (relative time) of stops</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="461"/>
<source>display segment duration</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="471"/>
<source>In diveplan, list transitions or treat them as implicit</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="474"/>
<source>display transitions in deco</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../qt-ui/plannerSettings.ui" line="481"/>
<source>verbatim diveplan</source>
<translation type="unfinished"/>
</message>
</context>
</TS>
Reference in a new issue View git blame Copy permalink