mirror of
https://github.com/subsurface/subsurface.git
synced 2025-02-19 22:16:15 +00:00
This is the official upstream of the Subsurface divelog program
Rewrite of the actual planner logic. Now ascend to the next potential stop depth. There the state is cached and we try to ascend to the next stop depth. If we hit the ceiling while doing that we go back to the cached state and wait there for a minute. Then we try again. Then loop. Converted all depth related variables from unsigned int to int. During planning, in a time step the current depth can temporarily be negative and comparisons of a negative int with an unsigned it have not the result I expected ( (int) -2 < (unsigned int) 3 turns out to be false). And we don’t really need the 32nd bit that unsigned buys us for depths. Deco stops are now shown in the same table as manually entered stops in boldface (I removed the second table to save screen estate). The gas shown in the table is still misleading as it means the gas used on the segment leading up to that event. The update of the profile only works partially upon changes in the list of available gases. Treatment of various gases is basically there but needs some more love. The ascent velocity is now provided by a function that takes the current depth as argument. Currently it always returns 10m/min but that will later be variable (and hopefully user configurable). The profile is not redrawn while deco is computed (avoiding an infinite recursion). The table got a new column for the duration of a segment while the old “duration” column was renamed “Runtime” to reflect what it actually shows. Currently, only the run time but not the duration are editable. All deco gases are used from the depth where their pO2 is 1.4bar. This should become more flexible. Calculation of the pressure drop in cylinders without configured volumes is suppressed. This solves a problem with the planner crashing when saving a dive where not all cylinders had been manually given a volume. [Short rant break: Treating 0/0 as air bites back at so many places. E.g. Cylinder data is initialized with memsetting the whole structures to 0. Then later suddenly this totally unconfigured cylinder is being treated as it would contain air. Maybe at some point this was a feature. But it lead to a naughty bug which took me over an hour to resolve. We should seriously reconsider this choice and better move to 209/0 being air if changing this everywhere is not too much trouble] Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org> |
||
---|---|---|
.tx | ||
appdata | ||
dives | ||
Documentation | ||
icons | ||
marbledata | ||
packaging | ||
qt-ui | ||
scripts | ||
tests | ||
translations | ||
xslt | ||
.clang-format | ||
.gitattributes | ||
.gitignore | ||
android.cpp | ||
CMakeLists.txt | ||
cochran.c | ||
CodingStyle | ||
color.h | ||
deco.c | ||
deco.h | ||
descriptor3.tsv | ||
device.c | ||
device.h | ||
display.h | ||
dive.c | ||
dive.h | ||
divelist.c | ||
divelist.h | ||
equipment.c | ||
file.c | ||
file.h | ||
gettext.h | ||
gettextfromc.cpp | ||
gettextfromc.h | ||
gpl-2.0.txt | ||
helpers.h | ||
INSTALL | ||
libdivecomputer.c | ||
libdivecomputer.h | ||
linux.c | ||
load-git.c | ||
macos.c | ||
main.cpp | ||
membuffer.c | ||
membuffer.h | ||
parse-xml.c | ||
planner.c | ||
planner.h | ||
pref.h | ||
profile.c | ||
profile.h | ||
qt-gui.cpp | ||
qt-gui.h | ||
qthelper.cpp | ||
qthelper.h | ||
README | ||
Readme.testing | ||
ReleaseNotes.txt | ||
satellite.svg | ||
save-git.c | ||
save-xml.c | ||
sha1.c | ||
sha1.h | ||
statistics.c | ||
statistics.h | ||
strtod.c | ||
subsurface-configure.pri | ||
subsurface-gen-version.pri | ||
subsurface-icon.svg | ||
subsurface-install.pri | ||
subsurface.1 | ||
subsurface.desktop | ||
subsurface.pro | ||
subsurface.qrc | ||
subsurfacestartup.c | ||
subsurfacestartup.h | ||
SupportedDivecomputers.html | ||
SupportedDivecomputers.txt | ||
terms | ||
time.c | ||
uemis-downloader.c | ||
uemis.c | ||
uemis.h | ||
webservice.h | ||
windows.c | ||
worldmap-options.h | ||
worldmap-save.c | ||
worldmap-save.h | ||
wreck.jpg |
This is the README file for Subsurface 4.0.2 After the release of Subsurface 3.1 the Subsurface developer team decided to make a major change in the development direction of the project. We switched to Qt as our UI toolkit and slowly, step by step replaced all the Gtk with corresponding Qt code. This caused lots of changes, from adding C++ to the list of programming languages used, to switching build systems to qmake, to refactoring the tightly interwoven UI and logic code that we had up until 3.1. The vast majority of this work was done by just a handful of people with Tomaz Canabrava carrying the biggest part of the load. As we had hoped, the switch to Qt brought us many new active developers and the Qt community has been extremely helpful supporting us when we ran into trouble. At this stage the Qt version has by and large reached functional parity with version 3.1; two notable features are missing: the filter by event type and the dive planner. The user experience and look and feel on the other hand far surpass what was available in 3.1. As always in a massive rewrite like this, there are still a small handful of known bugs and issues - please check ReleaseNotes.txt and our bug tracker at trac.hohndel.org. The latest public version is Subsurface 4.0.2, released in January of 2014. License: GPLv2 Subsurface can be found at http://subsurface.hohndel.org You can get the sources to the latest development version from the git repository: git clone git://subsurface.hohndel.org/subsurface.git . You can also browse the sources via gitweb at git.hohndel.org If you want the latest release (instead of the bleeding edge development version) you can either get this via git checkout v4.0.2 (or whatever the last release is) if you have already cloned the git repository as shown above or you can get a tar ball from http://subsurface.hohndel.org/downloads/Subsurface-4.0.2.tgz Basic Usage: ============ Install and start from the desktop, or you can run it locally from the build directory: $ ./subsurface You can give a data file as command line argument, or (once you have set this up in the Preferences) Subsurface picks a default file for you when started from the desktop or without an argument. If you have a dive computer supported by libdivecomputer, you can just select "Import from Divecomputer" from the "Import" menu, select which dive computer you have (and where it is connected if you need to), and hit "OK". The latest list of supported dive computers can be found in the file SupportedDivecomputers.txt Much more detailed end user instructions can be found from inside Subsurface by selecting Help (typically F1). When building from source this is also available as Documentation/user-manual.html Contributing: ============= There is a mailing list for developers: subsurface@hohndel.org Go to http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface to subscribe. If you want to contribute code, please either send signed-off patches or a pull request with signed-off commits. If you don't sign off on them, we will not accept them. This means adding a line that says "Signed-off-by: Name <email>" at the end of each commit, indicating that you wrote the code and have the right to pass it on as an open source patch. See: http://developercertificate.org/ Also, please write good git commit messages. A good commit message looks like this: Header line: explain the commit in one line (use the imperative) Body of commit message is a few lines of text, explaining things in more detail, possibly giving some background about the issue being fixed, etc etc. The body of the commit message can be several paragraphs, and please do proper word-wrap and keep columns shorter than about 74 characters or so. That way "git log" will show things nicely even when it's indented. Make sure you explain your solution and why you're doing what you're doing, as opposed to describing what you're doing. Reviewers and your future self can read the patch, but might not understand why a particular solution was implemented. Reported-by: whoever-reported-it Signed-off-by: Your Name <youremail@yourhost.com> where that header line really should be meaningful, and really should be just one line. That header line is what is shown by tools like gitk and shortlog, and should summarize the change in one readable line of text, independently of the longer explanation. Please use verbs in the imperative in the commit message, as in "Fix bug that...", "Add file/feature ...", or "Make Subsurface..." A bit of Subsurface history: ============================ In fall of 2011, when a forced lull in kernel development gave him an opportunity to start on a new endeavor, Linus Torvalds decided to tackle his frustration with the lack of decent divelog software on Linux. Subsurface is the result of the work of him and a team of developers since then. It now supports Linux, Windows and MacOS and allows data import from a large number of dive computers and several existing divelog programs. It provides advanced visualization of the key information provided by a modern dive computer and allows the user to track a wide variety of data about their diving. In fall of 2012 Dirk Hohndel took over as maintainer of Subsurface