mifr/subsurface
1
0
Fork 0
mirror of https://github.com/subsurface/subsurface.git synced 2025-01-19 14:25:27 +00:00
Code Issues Projects Releases Packages Wiki Activity
subsurface/pref.h

159 lines
3.3 KiB
C
Raw Normal View History

Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-10 17:26:10 -08:00
#ifndef PREF_H
#define PREF_H
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 13:51:49 +03:00
#ifdef __cplusplus
extern "C" {
#endif
Headers cleanup. Too much noise on the headers, this commit remove uneeded headers when they are uneeded. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-06-26 14:01:31 -03:00
#include "units.h"
Geo taxonomy: adjust the preferences to the new data structures This allows us to pick which three categories of geo taxonomy will be shown in the UI. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-01 12:32:46 -07:00
#include "taxonomy.h"
Headers cleanup. Too much noise on the headers, this commit remove uneeded headers when they are uneeded. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-06-26 14:01:31 -03:00
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 11:21:27 -07:00
/* can't use 'bool' for the boolean values - different size in C and C++ */
Massive automated whitespace cleanup I know everyone will hate it. Go ahead. Complain. Call me names. At least now things are consistent and reproducible. If you want changes, have your complaint come with a patch to scripts/whitespace.pl so that we can automate it. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-27 20:09:57 -08:00
typedef struct
{
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 11:21:27 -07:00
short po2;
short pn2;
short phe;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-10 17:26:10 -08:00
double po2_threshold;
double pn2_threshold;
double phe_threshold;
} partial_pressure_graphs_t;
Save and restore Facebook Prefs. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-12-23 21:45:06 -02:00
typedef struct {
char *access_token;
Changed Facebook stuff to socialnetworks.h/cpp All Facebook related stuff now is on SocialNetworks.h/cpp this makes it much easier to implement things and looking for bugs. working: - logging in - getting user id - getting album id ( or creating it ) *much* more testing is needed, of course. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-12-24 21:34:23 -02:00
char *user_id;
char *album_id;
Save and restore Facebook Prefs. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-12-23 21:45:06 -02:00
} facebook_prefs_t;
Preferences infrastructure for GeoManagement Simple preferences infrastructure with default prefs, prefs and hooks for the Qt Settings system and our preferences ui. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-22 18:44:05 -03:00
typedef struct {
bool enable_geocoding;
bool parse_dive_without_gps;
bool tag_existing_dives;
Geo taxonomy: adjust the preferences to the new data structures This allows us to pick which three categories of geo taxonomy will be shown in the UI. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-01 12:32:46 -07:00
enum taxonomy_category category[3];
Preferences infrastructure for GeoManagement Simple preferences infrastructure with default prefs, prefs and hooks for the Qt Settings system and our preferences ui. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-22 18:44:05 -03:00
} geocoding_prefs_t;
VPM-B: add deco choice to the ui. Removed recreational mode from ui and pref and replaced it with new deco_mode enum. Added radio button ui selection. Set default deco_mode to Buehlmann algorithm. Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
2015-07-03 23:07:58 +02:00
enum deco_mode {
BUEHLMANN,
RECREATIONAL,
VPMB
};
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-10 17:26:10 -08:00
struct preferences {
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 11:21:27 -07:00
const char *divelist_font;
const char *default_filename;
Create a text entry for default cylinder in preferences We don't do anything with this just yet. And frankly, a drop down of the cylinders that we know of would be even better. But hey, it's a start. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-23 15:34:17 -08:00
const char *default_cylinder;
Cloud storage: create preference entry for base URL This just deals with the mechanics. There is no UI to enter / change this URL (and that's intentional), neither is it used, yet. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-15 05:52:12 -07:00
const char *cloud_base_url;
const char *cloud_git_url;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 11:21:27 -07:00
double font_size;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-10 17:26:10 -08:00
partial_pressure_graphs_t pp_graphs;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 11:21:27 -07:00
short mod;
Be more consistent in partial pressure naming Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂. They all mean the same, but it's better to be consistent Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-06-22 16:41:44 +02:00
double modpO2;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 11:21:27 -07:00
short ead;
Renaming the prefs struct members to be consistent with the QSettings. -Renaming prefs members for consistency. -Changing references of QSettings to the prefs structure instead. -Removing unused functions in pref.h were left over from an old version. -Changing the data-type of bool members to short for consistency with other members. Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-04-16 22:03:44 +02:00
short dcceiling;
short redceiling;
short calcceiling;
short calcceiling3m;
short calcalltissues;
short calcndltts;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 11:21:27 -07:00
short gflow;
short gfhigh;
Animation speed is a value, not a boolean This breaks compatibility with old preferences, but it's a single key and not that very important so I don't think it's a bigger issue I've renamed prefs.animation to prefs.animation_speed to denote that it's a value, and not a state. Also, fixed the places that were treating it as a state (on/off) to treat it like a correct value. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-21 19:10:31 -03:00
int animation_speed;
Added a configuration option to have gf_low apply at max depth instead of at deepest ceiling. Signed-off-by: Patrick Valsecchi <patrick@thus.ch> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-20 16:11:22 +01:00
bool gf_low_at_maxdepth;
Display CCR setpoint values on the po2 graph When a CCR dive is viewed and the toolbar button for PO2 is activated, both the PO2 (green line) and the O2 setpoint (red line) are shown. This allows evaluation of the PO2 in the CCR loop with respect to the pre-configured O2 setpoint. The setpoint graph can be disabled from the Preferences/Graphs tab by checking the appropriate checkbox. Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-01-05 09:20:26 +02:00
bool show_ccr_setpoint;
CCR option: display o2 sensor data This patch creates the possibility of viewing the individual sensor values when the po2 button on the profile toolbar is activated. This follows exactly the procedure for optionally displaying the setpoint values while viewing po2. A checkbox in the preferences panel determines whether sensor information is shown. By default it is set to OFF. When checked, and the po2 button is activated, sensor1 values are shown in grey, sensor2 in blue and sensor3 in brown. Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-01-20 20:13:53 +02:00
bool show_ccr_sensors;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 11:21:27 -07:00
short display_invalid_dives;
Tie all the pieces together and make Preferences work as intended Not Apply / Close without Saving / OK work as designed. And things get correctly stored and reset. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-06-03 21:08:49 +09:00
short unit_system;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 11:21:27 -07:00
struct units units;
Add option to display GPS coordinates as decimals This adds a field to the units preferences to have GPS coordinates show as decimals (as for example Google maps does it). Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-20 12:25:46 +02:00
bool coordinates_traditional;
Show SAC in the mouseover. This is really nice to have when looking at specific parts of a dive. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-10-14 23:48:44 +02:00
short show_sac;
Renaming the prefs struct members to be consistent with the QSettings. -Renaming prefs members for consistency. -Changing references of QSettings to the prefs structure instead. -Removing unused functions in pref.h were left over from an old version. -Changing the data-type of bool members to short for consistency with other members. Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-04-16 22:03:44 +02:00
short display_unused_tanks;
short show_average_depth;
short zoomed_plot;
short hrgraph;
Tissue saturation plot a la Sherwater Pretel This adds a toolbox icon to turn on a tissue plot inspired by the bar graph of the Sherwater Petrel, It shows the inert gas partial pressures for individual compartments. If they are below the ambient pressure (grey line) they are shown in units of the ambient pressure, if they are above, the excess is shown as a percentage of the allowed overpressure for plain Buehlmann. So it has the same units as a gradient factor. Thus also the a gradient factor line (for the current depth) is shown. The different tissues get different colors, greener for the faster ones and bluer for the slower ones. Positioning and on/off icon action still need some tender loving care. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-09-15 14:09:00 +02:00
short percentagegraph;
Make rulergraph a pref as well I don't see a point in treating it differently from the other graphs. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-05-05 15:53:46 -07:00
short rulergraph;
TankBar: hook into prefs and make ppGraphs resize accordingly Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-15 08:11:14 -06:00
short tankbar;
Removed the globals 'userid' and 'save_userid_local' variables This is a preferences setting, it should belong to the preferences structure. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-04-17 11:34:21 -03:00
short save_userid_local;
char *userid;
Comment meaning of preference variables Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 16:00:02 +02:00
int ascrate75; // All rates in mm / sec
Hook up UI elements for ascent rates to planner That provides some UI elements that were recently introduced with function of allowing the ascent rates of the planner to be configured by the user. I tried to make it work both with senisble as well as with imperial units. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-06-25 00:08:36 +02:00
int ascrate50;
int ascratestops;
int ascratelast6m;
int descrate;
int bottompo2;
int decopo2;
Expose proxy settings into preferences struct Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-06-26 20:16:55 +04:00
int proxy_type;
char *proxy_host;
int proxy_port;
short proxy_auth;
char *proxy_user;
char *proxy_pass;
Planner: Add backgas breaks If the corresponding checkbox is checked the planner does interrupt pure O2 deco after 12min for 6min on cylinder 0. To make this work for air I removed the gasmix_is_null logic. I guess that makes the planner feature complete for the next release. [Dirk Hohndel: trivial merge into latest master] Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-02 22:07:38 +02:00
bool doo2breaks;
Move drop_stone_mode setting to prefs There is no reason to treat drop_stone_mode different from the rest of the planner settings, so move it to our prefs structure. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-09 23:37:30 +02:00
bool drop_stone_mode;
Comment meaning of preference variables Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 16:00:02 +02:00
bool last_stop; // At 6m?
Save more planner settings into prefs This adds to the prefs struct the variables last_stop, verbatim_plan, display_runtime, display_duration, and display_transitions from the planner so their values are saved from one session to the next. The widgets for some of those settings had default values in plannerSettings.ui; remove them since the new code in subsurfacestartup.c takes care of initializing them. Signed-off-by: Gaetan Bisson <bisson@archlinux.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-03-24 11:57:22 -10:00
bool verbatim_plan;
bool display_runtime;
bool display_duration;
bool display_transitions;
Checkbox and preference for safety stop Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-02 10:32:14 +02:00
bool safetystop;
Add only switch at required stop option Add the option to only switch at required stop to the planner UI. This is not actually used yet. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-22 21:48:42 +10:00
bool switch_at_req_stop;
Recmode: Allow the user to specify gas reserve. Since most regulators have an intermediate pressure of 10bar the minimum value is 10 while the max is 99. Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-09 17:41:41 +02:00
int reserve_gas;
Add planner minimum gas switch duration option Add the option for a minimum gas switch duration to the planner UI. This is not actually used yet. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-19 20:25:03 +10:00
int min_switch_duration; // seconds
Store drop_stone_mode, bottomsac, decosac in prefs The values for drop_stone_mode, bottomsac, and decosac are typically the kind of personal data specific to a diver that is unlikely to change from one dive plan to the next. This patch stores/restores them to/from the preferences file. For this, it adds bottomsac and decosac to the prefs structure; drop_stone_mode was already there, though not stored/restored. Signed-off-by: Gaetan Bisson <bisson@archlinux.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-16 17:32:06 -10:00
int bottomsac;
int decosac;
Prepare for PSCR calculations Calculations for passive semi-closed rebreathers are pretty much like OC except the pO2 is lower bey a certain (SAC dependent) factor. This patch introduces the corresponding calculations in case dctype == PSCR which is so far never set and there is currently no UI for these calculations. As pO2 is SAC dependent it takes a certain attempt at getting it and drops to defaults from the prefs otherwise. As there is no UI at this point and I also don't have any dives, this has not received much testing, yet, but it compiles. At least. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-10-24 16:40:21 +02:00
int o2consumption; // ml per min
int pscr_ratio; // dump ratio times 1000
Maintab combobox to set dive type still needs some work Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-01-01 17:00:46 +01:00
int defaultsetpoint; // default setpoint in mbar
Added the toggle picture button and hoocked it up This patch adds the toggle picture button and hoocks it up with the rest of the code. I'v also changed a call from ProfileWidget because it caused errors on the ui generated code, where it would try to call an still-to-be instantiated object. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-10 13:50:49 -03:00
bool show_pictures_in_profile;
Added a 'use default file' button on preferences. Added a 'Use default file' button on preferences in a way that doesn't clutters the interface. Fixes #630 Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-16 18:40:49 -03:00
bool use_default_file;
Preferences: hook up default file behavior in the dialog This now sets the preference variable / config entry and keeps them in sync. Doesn't actually change the behavior at program start, yet. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-14 08:17:06 -07:00
short default_file_behavior;
Save and restore Facebook Prefs. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-12-23 21:45:06 -02:00
facebook_prefs_t facebook;
Cloud storage: rethink the terminology used Cloud storage makes more sense that remote storage - at least I assume that more people are used to thinking about "storing things in the cloud". Don't use PIN or passphrase, call it a password everywhere. Don't use copy_string() to copy the password - the git credentials routine asserts that password is not NULL, so make sure we at least have a pointer to an empty string here. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-31 17:42:12 -07:00
char *cloud_storage_password;
Make password change asynchronous This isn't perfect (if you make multiple requests things could go badly), but it's better than just slapping the new password into the settings, even if the update failed. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-22 15:06:57 -07:00
char *cloud_storage_newpassword;
Cloud storage: rethink the terminology used Cloud storage makes more sense that remote storage - at least I assume that more people are used to thinking about "storing things in the cloud". Don't use PIN or passphrase, call it a password everywhere. Don't use copy_string() to copy the password - the git credentials routine asserts that password is not NULL, so make sure we at least have a pointer to an empty string here. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-31 17:42:12 -07:00
char *cloud_storage_email;
Cloud storage: first stab at implementing cloud storage So far there is no mechanism to actually create a repository on the server, so this only works with the two test repositories. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-31 22:11:27 -07:00
char *cloud_storage_email_encoded;
Cloud storage: rethink the terminology used Cloud storage makes more sense that remote storage - at least I assume that more people are used to thinking about "storing things in the cloud". Don't use PIN or passphrase, call it a password everywhere. Don't use copy_string() to copy the password - the git credentials routine asserts that password is not NULL, so make sure we at least have a pointer to an empty string here. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-31 17:42:12 -07:00
bool save_password_local;
Cloud storage: clean up handling of cloud storage account Correctly tracking the status of our authentication with the cloud service is non-trivial, especially since the user may quit Subsurface between registering and verifying an account, they might even register on one machine and verify on another. This tries to make sure that when in doubt we check with the cloud service backend. And we show errors in the UI. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-14 13:50:13 -07:00
short cloud_verification_status;
Cloud storage: Add preference option whether to sync in the background This defaults to on as that's the most useful setting for the average user. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-12 11:48:56 -07:00
bool cloud_background_sync;
Preferences infrastructure for GeoManagement Simple preferences infrastructure with default prefs, prefs and hooks for the Qt Settings system and our preferences ui. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-22 18:44:05 -03:00
geocoding_prefs_t geocoding;
VPM-B: add deco choice to the ui. Removed recreational mode from ui and pref and replaced it with new deco_mode enum. Added radio button ui selection. Set default deco_mode to Buehlmann algorithm. Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
2015-07-03 23:07:58 +02:00
enum deco_mode deco_mode;
VPM-B: Add conservatism levels to deco.c Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
2015-08-15 14:36:07 +02:00
short conservatism_level;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-10 17:26:10 -08:00
};
Massive automated whitespace cleanup I know everyone will hate it. Go ahead. Complain. Call me names. At least now things are consistent and reproducible. If you want changes, have your complaint come with a patch to scripts/whitespace.pl so that we can automate it. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-27 20:09:57 -08:00
enum unit_system_values {
METRIC,
IMPERIAL,
PERSONALIZE
};
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-10 17:26:10 -08:00
Preferences: hook up default file behavior in the dialog This now sets the preference variable / config entry and keeps them in sync. Doesn't actually change the behavior at program start, yet. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-14 08:17:06 -07:00
enum def_file_behavior {
UNDEFINED_DEFAULT_FILE,
LOCAL_DEFAULT_FILE,
NO_DEFAULT_FILE,
CLOUD_DEFAULT_FILE
};
Cloud storage: clean up handling of cloud storage account Correctly tracking the status of our authentication with the cloud service is non-trivial, especially since the user may quit Subsurface between registering and verifying an account, they might even register on one machine and verify on another. This tries to make sure that when in doubt we check with the cloud service backend. And we show errors in the UI. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-14 13:50:13 -07:00
enum cloud_status {
CS_UNKNOWN,
CS_INCORRECT_USER_PASSWD,
CS_NEED_TO_VERIFY,
CS_VERIFIED
};
Store the user's unit preferences in git storage Save and load a usually unused copy of the preferences with the units that were active the last time the dive list was saved to git storage (this isn't used in XML files); storing the unit preferences in the data file is usually pointless (that's a setting of the software, not a property of the data), but it's a great hint of what the user might expect to see when creating a backend service that visualizes the dive list without Subsurface running - so this is basically a functionality for the core library that Subsurface itself doesn't use but that another consumer of the library (like an HTML exporter) will need. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-06-16 20:28:42 -07:00
extern struct preferences prefs, default_prefs, informational_prefs;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-10 17:26:10 -08:00
#define PP_GRAPHS_ENABLED (prefs.pp_graphs.po2 || prefs.pp_graphs.pn2 || prefs.pp_graphs.phe)
Use the Windows default font on Windows 7 and 8/8.1 It contains the characters we need and will make the application look more "native". See #712 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-22 15:22:02 -07:00
extern const char *system_divelist_default_font;
Default font: more fine tuning In order to get rid of the old default font on Windows (Calibri) we are going to near ridiculous length. The reason for this is that we in the past always saved the default font in the settings (how stupid was that!) and so now even with a new default font in place, since there is an explicit font in the settings we take that instead of the default. Instead of requiring our existing users to use a registry cleaner to get the correct default font on Windows 7 and later (the VAST majority of our Windows users at this stage), we simply explicitly ignore that old default font. There is one very nasty side effect. A user cannot set Calibri as their font of choice on Windows 7 or later (because we always force them back onto Segoe). Given how much nicer Segoe looks I think this is an acceptable flaw - let's hope this doesn't come back to bite me in the future. At the same time this changes the default font size handling. We try to get the default font size of the OS so the app looks "right". This seems to not give me the expected result on Linux with KDE, but maybe I'm doing it wrong? Looks good when testing on Windows. See #712 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-27 06:00:10 -07:00
extern double system_divelist_default_font_size;
Add 'system_default_directory()' helper function This is just a extern "C" wrapper around QStandardPaths::AppDataLocation, while also making sure the entry exists. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-02-08 11:35:50 -08:00
extern const char *system_default_directory(void);
Add default filename and divelist font to prefs structure .. and add the usual logic to not save the default values. This also simplifies the initial system-specific setup of both of these: since we have defaults for all the preferences that get set up at startup, we can just initialize those defaults to the system-specific fonts then and there. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 17:07:22 -08:00
extern const char *system_default_filename();
Default font: more fine tuning In order to get rid of the old default font on Windows (Calibri) we are going to near ridiculous length. The reason for this is that we in the past always saved the default font in the settings (how stupid was that!) and so now even with a new default font in place, since there is an explicit font in the settings we take that instead of the default. Instead of requiring our existing users to use a registry cleaner to get the correct default font on Windows 7 and later (the VAST majority of our Windows users at this stage), we simply explicitly ignore that old default font. There is one very nasty side effect. A user cannot set Calibri as their font of choice on Windows 7 or later (because we always force them back onto Segoe). Given how much nicer Segoe looks I think this is an acceptable flaw - let's hope this doesn't come back to bite me in the future. At the same time this changes the default font size handling. We try to get the default font size of the OS so the app looks "right". This seems to not give me the expected result on Linux with KDE, but maybe I'm doing it wrong? Looks good when testing on Windows. See #712 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-27 06:00:10 -07:00
extern bool subsurface_ignore_font(const char *font);
Use the Windows default font on Windows 7 and 8/8.1 It contains the characters we need and will make the application look more "native". See #712 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-22 15:22:02 -07:00
extern void subsurface_OS_pref_setup();
Update preference saving for numeric values This does the "don't save defaults" for numeric values too. Also, move the preferences loading/saving to a new "prefs.c" file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 10:14:10 -08:00
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 13:51:49 +03:00
#ifdef __cplusplus
}
#endif
Put include guard to every header * ensure include guard to every header * comment endif guard block Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-11 19:14:46 +01:00
#endif // PREF_H
Reference in a new issue Copy permalink