Commit 4d06ddd723 removed deletion of
unused dive sites on save. The corresponding variables were not
removed leading to compiler warnings. Remove the variables too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When no real name is set in /etc/passwd the username ends
up being ",,,". Git does not like that. Actually, only the
part before the first comma is the name, the rest is office
and phone number. We don't want those.
Before we only testing for the username being a NULL pointer.
Reported-by: Keith Grimes
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This adds a checkbox for rebreather modes of the planner
that force the ascent to be in OC mode. Before, one had
to add a one minute last segment with the mode change but
this is not practical when manually searching for the
maximal bottom time given gas reserves.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The installment of the divelist-undo system has made it unnecessary
to adopt the uniq-id of the merged-into dive. On the contrary, we
want to avoid two dives with the same dive-id in the divelist at
all costs, since get_divenr() still uses the id and thus may fetch
the wrong dive.
Therefore, don't copy the dive-id on merge.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we want to download trips into a distinct trip-table
instead of the global trip-table to allow for undo of import.
Therefore add a trip_table argument to DiveImportedModel::repopulate()
and a trip_table member to DiveImportedModel. To correctly set these,
add a DownloadThread::trips() function, which currently simply returns
the global trip table.
Finally, make "struct trip_table *" a Q_METATYPE, so that the corresponding
arguments can be passed from QML.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently trips are added to the global trip table. If we want to
make dive-import undoable, we should be able to parse trips of a
log-file into a distinct table. Therefore, add a trip_table
parameter to
- insert_trip()
- create_and_hookup_trip_from_dive()
- autogroup_dives()
- unregister_trip()
- remove_dive_from_trip()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, all trips are kept in a linked list. Replace the list
by a table in analogy to dive_table. Use this to keep the trip_table
sorted as suggested by dump_trip_list(). When inserting a trip into
the table do that after adding the dives, to avoid warnings coming
out of dump_trip_list().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 64e6e435f8 the trip->when field
was replaced by a function. This forgot to adapt dump_trip_list(),
which is only compiled if DEBUG_TRIP is defined. Fix the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rename
- dive_get_insertion_index() -> dive_table_get_insertion_index()
- unregister_dive_from_table() -> remove_from_dive_table()
- get_idx_in_table() -> get_idx_in_dive_table()
- sort_table() -> sort_dive_table()
This will make it more straight-forward to generate these functions
from macros.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was not used outside of divelist.c, therefore make it
local. Moreover rename it to add_to_divetable so that the name
is generic and can be generated by a macro.
Moreover, remove the special case idx = -1, which would determine
the insertion index. Instead let the single caller who used this
feature do this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently autogroup_dives() groups all dives in the global dive
list. Add a table parameter so that dives in any table can be
grouped. Thus it will be possible to pre-group dives on import,
which will be used for undo of import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After loading or importing, the caller usually called autogroup()
to autogroup dives if so wished by the user. This has already led
to bugs, when autogroup() was forgotten.
Instead, call autogroup() directly in the process_loaded_dives()
and process_imported_dives() functions. Not only does this prevent
forgetting the call - it also means that autogrouping can be
changed without changing every caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unused dive sites were deleted on save. This clashed with the undo
system in the following scenario:
1) Delete single-use dive site.
2) Save (dive site deleted)
3) Undo (reference to freed dive site)
Therefore, as a quick-fix, keep the referenced dive site around.
Note that this also means that empty dive sites must not be
deleted, as it might refer to a dive in the undo system. Instead
only clear references to empty dive sites in the global dive
table. Factor this functionality out, as it was common to the
XML and git savers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The starTimestamp is 4 hours apart on 2 different DCs within the sample
log. DiveDate on the dive_logs table seems to be correct, but must be
converted from human readable format.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Seems that Shearwater cloud stores sample rate into the database and
it is not constant within the log.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This works to some extent to part of a sample log I received. However,
still quite a bit more work is needed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
I encountered this while implementing Shearwater Cloud import, but it
makes sense to increase the size for dive id for Shearwater Desktop as
well.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
wcslen() returns the number of characters in a wchar_t string.
In the case of WideCharToMultiByte() an estimate for the size of
the utf8 buffer is needed. Using wcslen() is incorrect for such a buffer,
because for any non-ASCII character the estimate will be off by 1 byte.
Call the following instead to obtain the proper UTF8 buffer size
for the conversation:
WideCharToMultiByte(CP_UTF8, 0, utf16, -1, NULL, 0, NULL, NULL);
Also fix some missing "\n" in fprintf() calls.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
After upgrading to Qt 5.12.0, download over BT from a DC did not work
any more. On the console the message "Connecting to port is not
supported (Uuid required)". Linus noticed earlier that we do rather
strange processing in this part of the code related to selecting port 1
or port 5. This all seems not needed (any more), but broader testing is
advised. This being stripped from the code, the mentioned error from Qt
persisted. That is strange in itself, as we did not reference port
numbers any more.
Step 2 in this commit is actually using an uuid to the call to
connectToService. Choosing an uuid seems relatively straightforward as
we can use the same one we already use for Android. That is the default
BT RFCOMM Serial Port Profile uuid. Interestingly, when changing to this
uuid we run immediately in a Qt runtime error telling us "QDBusPendingReply:
type ManagedObjectList is not registered with QtDBus.". For these 2
unexpected Qt messages, QTBUG-72742 was made. Studying the Qt source
code at this point reveals a possible workaround. Simply create a local
QBluetoothLocalDevice object, which, behind the scenes registers the Qt
internal ManagedObjectList with QtDBus.
In the meantime, Qt agrees that QTBUG-72742 is valid, and that a fix is
to be expected in a future version. At that point in time, the
declaration of the QBluetoothLocalDevice can be deleted again.
In the end, interfacing over BT works again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is an attempt to fix issue #1896. While this seems a Qt issue in
combination with very specific Android devices, this might be a fix. Do
not check for a very specific state of the local BT controller, but just
check if it is powered on.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In commit 6bf4120dbb the trip-flags
were replaced by a simple boolean. This made the was_autogen
parameter to the remove_dive_from_trip() and unregister_dive_from_trip()
functions unused. Remove these parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Just like with the Aqualung i770R in 7697003498 this name follows the
pattern of a model number in ASCII encoding, followed by the serial
number of the device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make data flow more clear, unglobalize the downloadTable object.
Make it a subobject of DownloadThread. The difficult part was making
this compatible with QML, because somehow the pointer to the
download-table has to be passed to the DiveImportedModel. Desktop would
simply pass it to the constructor. But with objects generated in QML
this is not possible. Instead, pass the table in the repopulate()
function. This seems to make sense, but for this to work, we have to
declare pointer-to-dive-table as a Q_METATYPE. And this only works
if we use a typedef, because MOC removes the "struct" from "struct
dive_table". This leads to compilation errors, because dive_table is
the symbol-name of the global dive table! Sigh.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DCDeviceData was using that weird pattern where the instance
variable was set in the constructor. There is no apparent
reason to do so, therefore convert to a "normal" singleton.
Access that directly in QMLManager instead of saving it in
a member variable first.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The simplified filter-widget doesn't present lists of existing values
with counts. Thus, a whole slew of count_dives_with_*() functions
can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These two functions were called in different contexts:
- unregister_dive(): from the undo-commands to remove the dive
from the global dive table, but not delete it. The dive was
already removed from its trip.
- delete_single_dive(): from non-undo code. Most of it not in
use and removed in a sibling-commit. Here, the dive is supposed
to be removed from its trip and a new selection is calculated.
delete_single_dive() calls unregister_dive(), which removes the
dive from its trip. Move remove_dive_from_trip() from the former
to the latter and make both functions independent. Instead
of deleting the dive explicitly in delete_single_dive(), call
the delete_dive_from_table() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All callers of add_dive_to_trip() work on freshly generated dives,
with one exception, that was redundant anyway. Therefore it is not
necessary to remove the dive from a potential previous trip. Move the
responsibility of removing the dive from a trip to the caller,
respectively remove the redundant call. Add a warning message in the
case that trip is set.
Background: On import (either download or file-import) we might not
want to add trips to the global trip-list. For example to enable undo
of import but more generally to detangle that data flow. Thus,
add_dive_to_trip() should not mingle with the global trip-list,
which it has to do if a trip is deleted because the old dive was
removed.
Analysis of the add_dive_to_trip() callers:
1) core/dive.c
pick_trip():
called on freshly generated merged dive.
finish_split():
called on two freshly generated split dives.
2) core/divelist.c
create_and_hookup_trip_from_dive():
called on freshly downloaded dive in dive_cb().
called on freshly downloaded dive in record_uemis_dive().
autogroup_dives():
called on dive from get_dives_to_autogroup(), which only
finds dives that are outside of trips.
combine_trips():
unused - removed in sibling commit.
try_to_merge_into():
this call was actually erroneous - dive was already added
to trip in try_to_merge(). Remove call.
3) core/libdivecomputer.c
dive_cb():
called on freshly downloaded dive.
4) core/uemis_downloader.c
record_uemis_dive():
called on freshly downloaded dive.
5) core/load_git.c
create_new_dive():
called on freshly allocated dive.
6) core/parse.c
dive_end():
called on freshly parsed dive.
7) desktop-widgets/command_divelist.cpp
DiveListBase::addDive():
called on dive which is newly added to core.
moveDiveToTrip():
called on dive that was removed from trip a few lines above.
8) mobile-widgets/qmlmanager.cpp
QMLManager::undoDelete():
called on dive where divetrip was reset in the previous line.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 302f6adb79 dive-splitting was made
undo-able. To this goal, the dive-splitting functions were split in
two types: Those that operate directly on the divelist and those that
only allocate the dives. The former are not in use anymore, therefore
remove them. Since only the latter remain, remove the "_dont_insert"
appendix of the name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 014c04f8bd merging dives was included
in the undo-system. This made the merge_two_dives() function caller-less.
Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In f427226b3b autogrouping / removal
of autogrouping was moved into the undo-machinery. This made the
remove_autogen_trips() function caller-less. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In f427226b3b a combine_trips_create()
function was introduced that combined trips without deleting the old
trips. This was necessary for making combine-trips function undo-able.
The old combine_trips() function is not used anymore. Therefore remove
it. Rename the combine_trips_create() function to combine_trips() as
no differentiation is needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, when selecting "Load media files even if time does not
match the dive time", the media are added to *all* selected dives.
Instead add it to the closest dive.
This seems like the less surprising behavior. Of course now if the
user really wants to add a media file to multiple dives, they will
have to do it manually.
To avoid a messy interface, this is solved by moving the iterate-
over-selected-dives loop to the core. Thus, a helper-function can
be made local to its translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
EMPTY_DIVE_STRING used to be a string-literal representing missing
information ("--"). In 6985c123d4 it
was replaced by the actual empty string. Using a literal to represent
the empty string seems a bit pointless, therefore remove it completely.
Notably:
QString(EMPTY_DIVE_STRING) -> QString()
if (temp.isEmpty()) temp = EMPTY_DIVE_STRING; -> noop
if (s == EMPTY_DIVE_STRING) -> if (s.isEmpty())
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In dive.h there was a redundant 'extern "C"' block defined inside
another 'extern "C"' block. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Desktop used the hidden_in_filter flag in struct dive, mobile
used its own vector plus a new showndives member in struct dive_trip.
Unifiy these to use the same core-facility, viz. hidden_by_filter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functionality was used by the desktop filter. To unify desktop
and mobile, move it into two new functions in divelist.c
Since one of them is the only caller of is_same_day() move that
likewise into divelist.c and make it of static linkage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QML's ListView uses the "section" property to test if items belong to the
same section. Apparently, this must be a string and therefore we can't
pass e.g. a dive-trip object. Therefore a specially formatted string
was passed in, which was guaranteed to be unique (contained the dive-trip
pointer value) and the fully formatted trip-title and short-date.
The disadvantage of that approach is that the formatting is performed for
every dive and not every trip. Perhaps not a problem now, but it makes
it for example necessary to cache the number of filtered dives.
To be more flexible, pass in only the pointer value formatted as
hexadecimal string and provide a function to convert that string
back to a trip-pointer (in the form of a QVariant, so that it can
be passed to QML). Moreover provide two functions for formatting the
title and the short-date.
The three new functions are members of DiveListSortModel. This might not
be the perfect place, but it is easy to reach from the DiveListView.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveObjectHelper::trip() function was
1) Misnamed: it returned the *location* of the trip
2) Not used outside of DiveObjectHelper
Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Just as we did for pointer to struct dive_site, make pointers to
struct dive and struct dive_trip "Qt metatypes". This means that
they can be passed through QVariants without taking a detour via
void *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the protocol in Erik Baker's document
"Oxygen Toxicity Calculations". This code uses a
third-order polynomial approximation of Baker's
equation 2. Provision is made for
PSCR and CCR dive logs and dive plans. In the
case of dive logs, the values of o2 sensors are
used if there are data from such sensors. For CCR
only the data from the first O2 sensor is used even if
there are more than one sensor. This is a potential
weakness, but this function is probably NOT the
place to calculate mean o2 values accross all sensors
and to emulate voting logic to reject info from
aberrant sensors.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In 64e6e435f8 the when field of struct
trip was removed. Accordingly it was not read from git repositories.
This produced a large amount of user-visible error messages.
Reinstate the trip-date and time parsing functions, but ignore
the value.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 6b283e598a replaced the linked
list of dives in a trip by a table. Embarassingly, on dive deletion
the index of the dive in the table was compared for "!= 0" instead
of ">= 0". Thus, the first dive of a trip wouldn't be deleted, which
ultimately led to a crash, as different parts of the code were now
in disagreement over whether the trip is empty or not.
Fix the comparison.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only remaining use of the tripflag was to mark dives that
were removed explicitly from a trip, i.e. shouldn't be autogrouped.
Therefore replace the enum by a simple boolean.
Currently, there is no way of unsetting the notrip flag. But this
shouldn't result in a user-visible change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The distinction between ASSIGNED_TRIP and IN_TRIP was used to
prefer non-autogenerated trips on merging of dives. But owing
to bit rot this seem to have worked only partially anyway:
The IN_TRIP field was set in create_and_hookup_trip_from_dive()
and immediately overwritten in add_dive_to_trip() called
in the next line.
Instead, use the trip->autogen flag to check for priority and
remove the ASSIGNED_TRIP flag alltogether.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since upgrading to gcc 8.2 it produces noisy warnings about
potentially truncated strings. It doesn't recognize that
filenr can never become >4000. So clamp it down explicitly.
Do this by adding a function that does the assembly of the
filename path. Adding unnecessary code to silence compiler warnings
is dubious, but in this case it might be reasonable.
Fix a second instance by increasing the stack-allocated buffer
to 32 bytes. Hopefully nobody has more divespots than would
fit in a 9-decimal digit number!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding the dive to its trip before having filled out "when", the
dive gets added at the first position (when=0), which is usually not
correct. Instead, add the dive to its trip when all fields are correctly
filled out.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The when field gives the time of the first dive. Instead of keeping
this field in sync, replace it by a function that determines the time
of the first dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make sorting more controlled, move all sorting functions into
the core. For this, introduce a "dive_or_trip" structure, which
represents a top-level item. Adapt the DiveTripModel accordingly.
There are now three sorting functions:
1) dive_less_than
2) trip_less_than
3) dive_or_trip_less_than
These should be used by all sorting code. By moving them to a
single place, the mess can hopefully be cleaned up.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a step towards proper sorting, introduce a trip_less_than()
function in core. It simply sorts by the first dive, which should
be unique as dives may belong to only one trip.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dives of each trip were kept in a list. Replace this by a
struct dive_table. This will make it significantly easier to
keep the dives of a trip in sorted state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Up to now, dives were added to the global dive table with
add_single_dive(). Split out the funtionality to add a dive to
an arbitrary dive in the add_dive_to_table_function(). The
difference compared to record_dive_to_table is that dives
are added at a specific position or the sort-criterion given
by dive_less_than(). This will allow to use a dive tabe for trips
instead of a linked list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two versions of the insert_trip() function: one
would merge trips if a trip with the same date already existed,
the other wouldn't. The latter was introduced with the dive-list
undo work.
The problem is that the "date" of a trip (i.e. the first dive)
seems ill-defined as this is a volatile value. Moreover in
the context of making dive-import undoable this is a very
dangerous notion, as the caller needs control over when the dives
are added to a trip.
Therefore, unify these two functions and never merge trips.
The decision on merging dives now has to made by the caller.
This will be implemented in a future commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Cressi specific PID was not used
when serial_ftdi_open_device tried
to open the device.
Reported-by: Daniel Krupp
Signed-off-by: Daniel Krupp <daniel.krupp@gmail.com>
The DiveTripModel places dives after trips in chronologically
ascending mode if the dive and the trip start at the same instant.
But in the core the sort order was undefined. This could lead
to a discrepancy. Therefore, implement the same sort-criterion
in the core code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Update table of maximum oxygen exposure durations, used in CNS calulations.
This table shows the official NOAA maximum O2 exposure limits
(in seconds) for different PO2 values. It also gives
slope values for linear interpolation for intermediate PO2 values
between the tabulated PO2 values in the 1st column.
Top & bottom rows are inserted that are not in the NOAA table:
(1) For PO2 > 1.6 the same slope value as between
1.5 & 1.6 is used. This exptrapolation for PO2 > 1.6 likely
gives an underestimate above 1.6 but is better than the
value for PO2=1.6 (45 min). (2) The NOAA table only
tabulates values for PO2 >= 0.6. Since O2-uptake occurs down to
PO2=0.5, the same slope is used as for 0.7 > PO2 > 0.6.
This gives a conservative estimate for 0.6 > PO2 > 0.5. To
preserve the integer structure of the table, all slopes are
given as slope*10: divide by 10 to get the valid slope.
The columns below are:
po2 (mbar), Maximum Single Exposure (seconds), single_slope,
Maximum 24 hour Exposure (seconds), 24h_slope */
Then update Calculations of the CNS for a single dive -
this only takes the first divecomputer into account.
The previous version of the code did a table lookup and
used the max O2 exposure for the next-higher PO2 category.
This gave a shorter max O2 exposure time and a higher CNS
contribution for a specific dive segment, resulting in a
slightly conservative value of CNS, often some 2 - 3 % too high.
This code does an interpolation for PO2 values inbetween
PO2 entries in the lookup table and therefore results in a more
accurate maximum O2 exposure time for that PO2.
The maximum O2 exposure duration for each segment
is also calculated based on the mean depth of the two
samples (start & end) that define each segment. The CNS
contribution of each segment is found by dividing the
time duration of the segment by its maximum exposure duration.
The contributions of all segments of the dive are summed to
get the total CNS% value. This is a partial implementation
of the proposals in Erik Baker's document "Oxygen Toxicity Calculations" */
Overall, this PR does not radically alter the existing CNS calculation,
it only makes it more accurate and more consistent by doing
interpolation and by using mean segment depth to find PO2.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Adapt get_trip_date_string() to use the same logic as get_dive_date_string():
Use the static "loc" object to translate date. Before, the trip
date was shown in C locale.
Reported-by: Philippe Massart <philippe@philmassart.net>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a stray semi-colon on the beginning of a line in
DiveObjectHelper.cpp. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Usage of the flags expanded, selected and fixup was removed some
time ago. Remove the flags too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For unrecognized locales we use en_US by default. It makes much more sense for
South Africa to use en_GB.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And fix a crash very similar to the previous commit. When trying to
save (to git) with an empty dive site, ssrf crashes.
Again, add a simple guard to prevent this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With the fixed sematics of get_gasmix to return the new gasmix for
the time of a gas switch (added comments to make this clear), in the
OTU calculation we need the previous gasmix for the interval up to the
current time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes a subtle bug introduced in 5c4569247a which
unified two functions finding the gasmix at a given time
during the dive. There was a slight difference, though:
Does a gaschange exactly at that time count or not? For
the planner to work, the answer has to be in the affirmative.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Now that struct dive_site * is a proper Q_METATYPE it is not
necessary anymore to pass dive-sites as opaque uintptr_t types.
Simply pass a QVariants or directly via dive_site *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was this ugly pattern of passing pointers-to-dive_site via
a QVariant of void * type. This is of course inherently unsafe.
Pass these pointers using their proper types instead. This makes
it necessary to register them in Qt's meta-type system. Doing so,
fixes a bug: QML couldn't call into updateDiveSiteCoordinates()
because it didn't know the type and thus the coordinates of
the moved flag were not reflected in the divesite-dialog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MapWidgetHelper::reloadMapLocations() used an array of uuids to
add dive sites to the map only once. Replace this by an array
of pointers. This is a small piece of a larger effort to remove
dive site UUIDs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace UUIDs by pointers to dive-site in mobile code. In both
cases, the value is transported via a QVariant. The function
getCoordinatesForUUID(), which was only used from mobile, can
be replaced by a getCoordinatesFor() function taking a variant
supposed to contain a dive-site pointer. Likewise, the variant
of the centerOnDiveSite function is now supposed to wrap a
pointer-to-divesite.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Another small step in removing dive-site UUIDs: use a pointer
instead of a UUID in the "uemis_helper" structure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing uuids, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes more of the dive-site interface to return pointers
instead of UUIDs. Currently, most call sites directly extract
UUIDs afterwards. Ultimately, the UUIDs will be generally replaced
by pointers, which will then simplify these callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The uemis downloader uses a cache for location to divesite id.
Trivially, the divesite-uuid can be replaced by a pointer. This
is a tiny step to remove divesite UUIDs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a first step in removing dive-site uuids, change the interface
of the get_dive_site_*() functions to return pointers instead
of uuids. This makes code a bit more complicated in places where
the uuid is extracted afterwards (needed NULL check). Nevertheless,
these places should disappear once pointers instead of uuids are
stored in the dive-structures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Including ssrf-version.h in an include file that a lot of files depend on
caused a ton of unnecessary recompiles with every commit. This should reduce
that problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reverseGeoLookup() function defined in qthelper.cpp has long
ago moved to its own compilation unit. It is not even defined in
the headers anymore. Remove it and the now unnecessary <QNetwork*>
includes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When creating a trip header (as it is used in the mobile app right now), we need
to show the number of dives shown, not the total number of dives in that trip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We assume that any dive that gets added to a trip initially gets shown. The
filter logic then needs to make sure it adjusts this number (which then makes
it easy to tell the user how many dives of that trip are visible with the
current filter).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This feels a bit like cheating, but if we need to be able to make modifications
to the underlying dive and only have the helper object (for example inside of a
view model), doing everything through the helper object can turn into a real
performance issue.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this we can make it configurable if the search should include the notes field
and if the search should be case sensitive or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise we could match the end of one string and the beginning of the next,
so having a buddy name Linus and a dive master named Alvin would be matched
by USA.
Also add Notes to the full text search (I had forgotten those earlier).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A static variable was used to collect two parts of the location
string. Instead, explicitly store these two parts in two different
strings and concetenate them. One fewer variable and the program
flow is thus hopefully more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce a parser_state structure, which describes (most) of the
global parser state. Create such a structure in the entry routines
to the parser and pass it down to the individual functions. The
parser state is initialized and freed with the init_parser_state()
and free_parser_state() functions.
The main benefits are:
1) Isolation of parser state.
2) Keeping the global name space tidy.
3) Prevent memory leaks which could happen in truncated files by
freeing all the parser state after parse.
A somewhat controversial point might be that the individual
parsing functions are split in those that need parser-state and
those that don't. This means that there are now two versions of
the MATCH macro, viz. one for the former and one for the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is consistent with most other free_*() functions in the core
code and will make cleanup of parser state less verbose.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Export the free_picture() function from dive.c. The parser may need
this in case of truncated files to free its temporary resources.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently, the subsurface webservice was removed. Remove the corresponding
code in the parser. This removes a static variable, which was used
to generate unique dive-site ids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The variables country and city used in divinglog_place()
were never freed. Free them when the pointers are reset.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The utf8_string() function is used to extract whitespace-trimmed
strings. The function would happily overwrite the pointer to
the old string, which could therefore leak (suppose an XML has
redundant attributes).
Therefore preemtively free the string output parameter. This makes
it of course necessary to only pass in NULL-initialized pointers
or pointers to owned string.
The code survives the current set of parser-tests.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The deco parameters need special treatment to wire them up to the
underlying deco model code. And with the new preferences setup this
is a lot of boilerplate.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
On parsing of dive computer extra data, key/value pairs are stored
in global state. They are added to the dive computer with
add_extra_data(), which makes a copy of the string. The local
copies of the strings are never freed.
free() the strings after storing them. The data still leaks in case
of unfinished parsing of extra_data tags, but this will be
taken care of in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
delete_current_divecomputer() had some duplicate code to release
dive-computer resources. Use the free_dc_contents() function instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The serial and fw_version strings of struct divecomputer were copied
by pointer. This worked because they were never freed or modified.
Instead, do a deep copy of the strings and free them when appropriate.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On dive computer copy, the extra data (a list of key/value pairs)
was simply copied as a pointer. This worked because the list was
never freed nor modified. Copy and free the list on dive computer
copy and free, respectively.
This made it necessary to move the STRUCTURE_LIST_* macros up in
the dive.c file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit e5dca8228e a fixed order
of the arguments to merge_dives() was introduced: first dive old,
second dive downloaded. This made the dl variable, which pointed
to the downloaded dive useless. One instance was forgotten, which
led to a null-dereference.
Remove.
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
xml_parsing_units stores the units of the currently parsed XML
file. It is not used outside of parse-xml.c. Therefore, make
it of static linkage and remove the declaration from dive.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
sanitize_cylinder_type(), which is indirectly called from fixup_dive(),
had ft^3 -> mliter conversion code, which was executed on the
condition "xml_parsing_units.volume == CUFT".
But nowhere in the code base would xml_parsing_units.volume ever be
set to non-metric. Moreover, xml_parsing_units reflects the units
of the latest parsed XML file, but fixup_dive() is called in numerous
contexts not related to XML parsing. Therefore, the whole piece of
code seems highly questionable.
Remove this code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dive site data was collected in "cur_dive_site", which was then
merged into an existing or a new dive site. But only the struct
dive_site pointed to by "cur_dive_site" and the taxonomy data
were freed, not the textual data such as name or description.
Therefore, split out the approrpriate free-ing from the
delete_dive_site() function and call that instead of a simple
free().
A similar situation occured for dives that would not be added
to the dive-table because they were deemed incomplete. Use
free_dive() here instead of a simple free() too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I incorrectly thought that 'ci_pointing_to_guiding_tissue' was the only
missing initialization, because that is the only one valgrind pointed at.
... that is, until I started looking at a few more dives, which showed
that there were other parts tht weren't initialized either, like
double tolerated_by_tissue[16];
double tissue_inertgas_saturation[16];
double crushing_onset_tension[16]; // total inert gas tension in the t* moment
so just make sure to clear the whole data structure, to avoid any random
behavior due to uninitialized deco state.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In select_dive(), the selected dive would only be made the
current dive, if it wasn't previously selected. If multiple
dives were selected and the user clicked on one of them which
is not the current dive, then the current dive would be
deselected and thus not be the current dive anymore. The
only remaining dive would not be made the current dive,
because it was already selected. End result: null dive shown.
Therefore, always make the selected dive the current dive,
even if it is already selected.
Fixes#1792
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
copy_dc_renumber() is an internal function to copy dive computers
and renumber the cylinders. Since only the structure was copied,
in the case of multi-dc dives, the merged dives shared the same
computer. If one of them was freed, use-after-free crashes would happen.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to track whether we had selected the native BT mode in the
download dialog. But the information is redundant as we can tell from the
device name whether this is a BT/BLE download or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
process_imported_dives() might delete the currently selected
dives. This could lead to use-after-free problems. Therefore,
reset the currently selected dive to the last dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On dive import, dives to be added may be merged into already
existing dives. In such a case, the dive to be added is deleted.
Before doing so, it must be removed from the trip is belongs to
to avoid corruption of the trip-list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On merging make a deep copy of the picture list, to avoid a use-after-free
crash after the orginal dive is deleted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit 8c2383b495 dive merging was
changed to not modify the original dive. On import, dives were then
merged and the original deleted. The merge_weightsystem_info() was
not adapted accordingly (deep copy of string instead of pointer),
leading to a use-after-free crash.
Resolve this by doing a deep copy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of calling free() on all dives, call free_dive() which also
frees additional allocated data, not only the dive struct.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two declaration of clear_table(), one in dive.h and one
in parse.h. The definition was in parse.c. Since the parser doesn't
even use the function, move the function and its declaration to
divelist.[ch] and remove the redundant declaration in dive.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This variable was only used in the divinglog_dive() function. There,
it was initialized right at the beginning and therefore there seems
to be no point in conserving its value across function-calls.
Make the variable local and remove the global version.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Comits f427226b3b and 43c3885249 of the undo series introduced 2 calls
of autogroup_dives() without checking the autogroup global boolean.
This is a bug. An import from DC (for example) then triggers an
autogrouping, the divelist is autogrouped, and the UI button
is off.
This commit solves this. I've chosen for a guard in the autogroup_dives()
that now is a no-op when called when the user did not select autogrouping.
In additon, simplified the other calls to this function, as we do
not need to check before calling any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The dive-site-edit widget uses a copy of the to-be-edited site
to compare with old values. Generally, this seems overkill
(the original dive-site can be used for such a comparison).
But one place where it can't simply be removed is the taxonomy,
because the widget needs a place to store the unsaved data.
Change the code to use an explicit taxonomy structure instead
of the one provided in the copy. This should ultimately allow
removal of the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The global object displayed_dive_site is used a a backing-store
by the dive-site-edit widget. All external accesses were removed,
therefore make the object local to the widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The global object "displayed_dive_site" is used to store the
old dive site data for the edit-dive-site widget. The fields
of the widget were initialized from this object in the show
event. Therefore the object was updated in numerous parts of
the code to make sure that it was up-to-date. Instead, move
the initialization of the object to the function that also
initiatlizes the fields. Call this function explicitly before
showing the widget.
This makes the data-fow distinctly easier to understand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The name seems crazy until you realize that FQ is 0x4651 which is the model
number of the i770R. And the six digits are the serial number of the device.
Still crazy, but at least now you understand WHY.
Thanks to Jef for decoding that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes no sense, but apparently we need to start a fresh scan in order to be able
to talk to a different BLE dive computer on the Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On macOS, we cannot connect to a BT/BLE device until we have scanned it. Right
now this just sits quietly and waits, which given how long this can take is
rather unsatisfying and might look like Subsurface is hung.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we trigger a scan even without the dialog to pick the right
device, we need to remember all devices that we find.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of only starting the scan when explicitly asked to do so in the BT
dialog, create the discovery agent when the download dialog opens, since on
macOS we cannot connect to a device without having scanned for it first.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reverseGeoLookup() fetches dive-site data via GPS coordinates.
The coordinates and the result were passed via the global
"displayed_dive_site" object. To make data-flow more clear,
pass data as in and out parameters instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By making reply a std::unique_ptr<>, the function can be quit
from any point and the reply will be freed. This is valid according
to Qt's documentation as we're not deleting during signal processing.
This commit fixes a leak: reply was overwritten with the address of
a new object without freeing the old object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
According to Qt's docs, the QNetworkAccessManager is supposed
to be a long-living object. Therefore, don't create one on
every geo-lookup, but a single object for all geo-lookups.
By making the object function-local it is only initiaized
on first use. Morover this limits the amount of concurrent
geo lookups.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fetching the taxonomy from GPS coordinates was implemented in
a QThread. But the only access to the main function was a
direct call to run(). Thus, the thread was *never* started.
The function call was always asynchronous [it was using an
event loop though, so the UI doesn't hang]. Notably this
means that the signals connected to the thread would never
fire. And the spinner would never be activated.
Thus:
1) Turn the thread into a simple function.
2) Remove the spinner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Ultimately, we want to use a single dive-list and not replicate
it in the Qt-model code. To this goal, let's start with using
the same sort function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For undo, it is crucial that commands don't modify existing dives.
Unfortunately, dive merging would write into the data-structures
of the to-be-merged dives. To prevent it from doing so, make the
input dives const-pointers.
This led to a whole cascade of functions that had to take const
and significant churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Select the proper dives after the add, remove, split and merge
dives commands on undo *and* redo. Generally, select the added
dives. For undo of add, remember the pre-addition selection.
For redo of remove, select the closest dive to the first removed
dive.
The biggest part of the commit is the signal-interface between
the dive commands and the dive-list model and dive-list view.
This is done in two steps:
1) To the DiveTripModel in batches of trips. The dive trip model
transforms the dives into indices.
2) To the DiveListView. The DiveListView has to translate the
DiveTripModel indexes to actual indexes via its QSortFilterProxy-
model.
For code-reuse, derive all divelist-changing commands from a new base-class,
which has a flag that describes whether the divelist changed. The helper
functions which add and remove dives are made members of the base class and
set the flag is a selected dive is added or removed.
To properly detect when the current dive was deleted it
became necessary to turn the current dive from an index
to a pointer, because indices are not stable.
Unfortunately, in some cases an index was expected and these
places now have to transform the dive into an index. These
should be converted in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DiveListView, we have a very fundamental problem: When
On the one hand, we get informed of user-selection in the
DiveListView::selectionChanged() slot. This has to set the
correct flags in the C-backend.
On the other hand, sometimes we have to set the selection
programatically, e.g. when selecting a trip. This is done
by calling QItemSelectionModel::select().
But: this will *also* call into the above slot, in which
we can't tell whether it was a user interaction or an
internal call. This can lead to either infinite loops or
very inefficient behavior, because the current dive
is set numerous times.
The current code is aware of that and disconnects the
corresponding signal. This is scary, as these signals are
set internally by the model and view. Replace this
by a global "command executing" flag in DiveListNotifier.
The flag is set using a "marker" class, which resets the flag
once it goes out of scope (cf. RAII pattern).
In DiveListView, only process a selection if the flag is not
set. Otherwise simply call the QTreeView base class, to reflect
the new selection in the UI.
To have a common point for notifications of selection changes,
add such a signal to DiveListNotifier. This signal will be
used by the DiveListView as well as the Command-objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
