Edit will always fire,
Filtering only if the dive site already exists.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And not when we are adding a new dive site.
Also, remove hide button call.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not sure if this is the right approach, but it seems to work: when we
reset the state of the widget, we try to get the current dive site from
the current dive, and set it.
This way it will work for the globe later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we start the dive site edit dialog, either for add or for edit, we
don't save the state, so the reject state didn't know what to do with the
dive site.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All those calls are unnecessary:
The first will be called when the QComboBox in the MainTab changes
its index, and the other two calls shouldn't be called: the only thing
that should change a dive site inside the LocationManagement is the
LocationManagement.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'll connect this in the future with a few methods that will try to
maintain state between dive changes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can only enter in editing state by opening the editing dialog, so the
mainwindow check is now invalid. and also we shouldn't set the editingmode
to false, since we will edit until the user clicks close.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we didn't have a proper dive_site_table, the dive sites where
scattered across all dives and so we looped over all dives to find the
dive sites and add them to the tree. Now this is a bit cleaner, a bit
faster.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The globe used to allow the user to pick a dive site if the dive didn't
have coordinates, but this is now wrong since when in dive site editing
mode we can select multiple times new coordinates for it, and it should
only be marked as finished when the user actually finishes it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When setting a dive, we fire the dive site change a few times after the
index of the QComboBox is changed; we don't need that - fire just once.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clear was the right method to call when we used a line edit, and the line
edit didn't had a model to provide data. Calling clear() on a QComboBox
will delete all itens inside of it, and what we wanted was to choose an
invalid index - and that's -1
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code was commented out when I started to port the locations to new
code, and it's harmless to remove it now.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we are modifying the dive site inside of the dive, we can't ask the
dive for the new one, and we also can't use the name of the dive site, as
there's the possibility that two or more could have the same name, so rely
only on the index of it to get the uuid. The index is variable since we
will sort the dive_site_table alphabetically, but this doesn't matter
since we are using it only temporarely to get the uuid, and this one never
changes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The KMessageWidget that we used was from an ancient version of KDE4, KF5
is out for quite a while, so it's good that we also update our software
that uses parts of KDE.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, there's only one crash left (that I put a big TODO: on the maintab.cpp
about) and I'll fix it tomorrow as it's quite late here and I'm almost
sleeping at the keyboard.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I tought about it a bit, and the combobox of the location management was a
bit overkill - we already have another combobox to select the divesite and
also the plus button to add one.
If the user wanna edit the current divesite, he can go to menu and edit it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We are not going to use the add, edit, remove buttons. Removing will be
automatical, addition will be triggered when clicking on the plus on the
dive site. edit is automatically enabled as soon as you try to edit
anything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correctly change and update the dive_site, updating the name on the
combobox or other attached views.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also reorganized a bit of the code, and renamed a few misleading methods.
[Dirk Hohndel: remove some C++11 code]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trigger the ManageDiveSite from the MainMenu.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The credential callback doesn't appear to work (at least not the way I
implemented it) with v0.22 and earlier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far there is no mechanism to actually create a repository on the
server, so this only works with the two test repositories.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cloud storage makes more sense that remote storage - at least I assume
that more people are used to thinking about "storing things in the cloud".
Don't use PIN or passphrase, call it a password everywhere.
Don't use copy_string() to copy the password - the git credentials routine
asserts that password is not NULL, so make sure we at least have a pointer
to an empty string here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should be asked when we are in dive_site_edit mode.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
run std::sort on the dive_site list inside of the model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only happens if you dont't have any divesites in your list, but either
way, it could happen.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing the index of the combobox we were discarting the
dive_site_id. This fixes it.
Now I need to understand what's happening to the globe.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The LocationEdit now correctly connects to the QComboBox signals, not the
QLineEdit signals.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch updates the DiveLocationModel when the
GeoLoockupInformationThread finishes, and also selects
the correct index for the displayed dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I forgot about this one, and we are going to use it
in the mobile version too.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class will surely be used on the mobile version, and it was very
tangled inside divepicturewidget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Models.h now is quite minimal, I'll keep it like that for now, until it
grows huge again. I've also cleaned a bit the headers that are using it so
only the ones that actually need the stuff that I've left behind will
actually include this file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another attempt to make it easyer to create the mobile version of
Subsurface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another attempt to make it easyer to create the mobile version.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
One more step to make it easyer to port the app to Mobile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is another effort to make it easyer for the mobile
interface of Subsurface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another change to make it easier to program the mobile ui. This was a
fairly easy patch: just moved the contents of the file and fixed the
includes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still trying to make it easier for the Mobile Port:
This patch is a bit bigger than I hopped, but it was the smallest that I
could get.
A lot of TODO items where added where I broke the code because the current
implementation would break the QML implementtion on the designer. I'll
most probably fix those myself when I finish the transition to the models
to the new folder.
I only moved both models at once because there's an interdependency
between them (seems inevitable, tough, but I'll take a better look at it
later).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an attempt to help share code between the desktop version of
Subsurface and the mobile version.
More code will be moved around and the models will be split in a way that
will help recompile times and also creation of different interfaces for
different form-factors.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Corrects typo in ebaa7d1fd which impeded that changes in dive rating
were saved after editing.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows entering / storing the PIN (aka passphrase) for the ssh key.
The email isn't used, yet - this will be used by the automated backend to
create a unique git repository that will turn into the remote storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While we don't expose it as this to the user, we'll need an ssh key and
potentially a passphrase in order to communicate with the git server in
our infrastructure. This simply sets up a way to store the passphrase.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This copies peaces from the downloadfromdivecomputer dialog into the
configuredivecomputerdialog and connects them to be able to create a
logfile form the configuration of the divecomputer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the file selection dialog box now always adds a default
suffix to the file name we pick - which results in our test for git
storage to fail.
So if the filename looks like "<path>[branch].ssrf" then remove the suffix
that was added.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Emitting the stopFilterDiveSite signal caused us to clean up the UI which
reset currentDs to NULL if this was a new dive site...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It doesn't matter if we first enter coordinates, name, description or
notes. If there is no currentDs we need to handle that gracefully.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When double clicking on the globe on a dive with no dive site we did
almost the right thing - except that we didn't create a dive site.
Not 100% sure this is the right place to do this, but it seems to work and
prevents the crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While filtering we would have trips that were collapsed, but this doesn't
really make much sense while managing dive_sites.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Untested code to filter out dives that are not at the active dive_site.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive site management requires that we filter all the dives that are on
the current dive_site, this is the preparatory work for that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old way we set the location and *then* updated the model, so the very
first location that we tried to show was empty.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When triggering the dive_site management, we need to get the uuid that was
send to us and set it as the current dive_site on the combobox, the dialog
can fill all required info for us.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We will however create a new dive site when the user clicks on the add
button - creating it here would led to strange behavior.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setLocationId will filter the dives, so ignore the visual changes when
accepting / rejecting, it will only be triggered again when we are showing
this dialog again.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should only set the dive_site on the dive site management widget when
we are going to use that information, this is because the dive_site
management widget will filter all dives on the dive list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The suit field should take up all the remaining space and the stars should
be vertically centered with the text.
This looks much better
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The parent here should have been the mainwindow, but we create this dialog
on the stack instead of the heap and because of that we don't set the
parent to prevent a double free.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the export dialog more consistent with the rest of
Subsurface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the single filter dialog - the spacing is much better, but when
activated it seems cluttered, this is because the outer layout (the one
that encapsulates everything) has the wrong layouting - I need to find and
fix that. I'll actually change that to a splitter, it will provide a more
flexible resize of the widgets.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also, added tooltips to the Tab Texts.
I need to fix the layout issues of the Equipments, but that's not inside
the UI. Things are much more sane now.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I seem to have found a sane way to create layouts:
If it's the 'outer' layout, the one that encapsulates everything:
- Horizontal Spacing: 5
- Vertical Spacing: 5
If it's a vertical inner layout that is grouping items like label +
control:
- Spacing: 0
This way the label will be 'touching' the item, without empty space, so
you know that the label refers to that widget.
If it's an horizontal inner layout:
- Spacing: 5
Different from the Vertical Layout, we don't want to make horizontal items
touch each other, a bit of space is fundamental to the eyes.
If it's a Grid Layout:
- Vertical Space: 0
- Horizontal Space: 5
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this worked for a bit, it was very error prone as it relied in
layout having specific names, and layouts in the .ui files are treated as
substandard items. Every time a 'break layout' command is issues (and it's
issued quite a lot when trying to reorganize the items on the widget) all
layout items are removed and new ones are added later, without any of the
names.
Since the new layout can be different the old names are not usefull
anymore - and a clean compilation won't trigger a single warning either:
the name resolution is done at runtime and not at compile time, so it
would just fail silently.
Instead of brute-forcing each layout to have 0,0 or 5,5 margins, we should
put the correct values on the .ui files.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I`m now clearing the code for all use of Qt < 5, since Qt 5 was released
for quite a while and making two versions of Qt to work together is a bit
painfull.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit aggressive as it changes the globe with every single
character that's entered, but it's better than what we had before.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We still don't respond correctly to a user changing them (i.e., the map
doesn't change), but at least once they change the dive to a different
dive and back to this one things get done correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a field to the units preferences to have GPS coordinates
show as decimals (as for example Google maps does it).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
so it affect no longer the previous leg but all the following ones
with the same gas (i.e. until the next gaschange).
This makes the add dive/planner behaviour more consistent
with the rest of the program regarding gas changes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We shouldn't allow the user to change the location when we are probing
the web for the correct places if we are updating an old file from
Subsurface. This makes use of a pleasant spinner that works beautifully.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
'enable' and 'disable' is too generic, and we are only
blocking the geolocation edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Open dive file. Click Location-manage. Pick a site. Click close. Click
Location-manage again. BOOM.
This seems to make sense, but since not a lot of the code is hooked up
yet, I'm not sure this is what we want in the end. But for now it prevents
an easily reproduced crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The SimpleWidgets file was getting too big, and location information will
also need a new model - a good way to do not mix everything is to put
things in a new file.
[Dirk Hohndel: added missing include of stdint.h]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a few interface items to handle location editiing, a combobox to show
everything, and three buttons: add, edit, delete.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The layout was just plain ugly; this fixes that and also adds the
possibility to insert new controls that will be userfull for managing the
Locations.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The maintab should be disabled when the geolocation thread is
running - but if you changed the dive, it would reenabled it.
(actually this should be only on the location widget, I'll send
another path later)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know what happened to me, I connected to some signals that didn't
exist at all.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For free dives (corresponding to dive mode or duration shorter than
15min), the display format for duration is changed to display minutes
and seconds.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this worked on Linux, on the Mac we didn't have an input field to
enter the file name. With this we explicitly declare that this is a file
save dialog and that the user can specify a non-existing file name.
Fixes#872
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So just like tags do "differential editing". Figure out what (or in this
case, who) was added / removed from the displayed dive and do the same for
all other selected dives.
This does seem a bit over top for divemaster, but this is more consistent
and therefore should make more sense to the user - assuming we ever have
one who runs into this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As a side effect this changes the signature of plan(): Before it
returned an int that was supposed to be possibly an error but
we never bothered to check it. So now it's bool indicating if the
planner did add stops.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial selection change signal seems to potentially be sent
before the listview is even visible when we do the first "scrollTo()"
to the currently selected dive.
That, in turn, seems to result in that when the listview is actually
shown, it will be scroll the trip description off the visible area,
and force the current dive to be shown at the very top of the
divelist. Which is not very nice: we do want to scroll to the current
dive, but we don't want to hide the current trip in the process.
Ignoring the selection change if the listview isn't even visible seems
to fix things for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes Collapse All only visible when its needed, and it
also fixes a crash when invocking collapse all when there was
nothing to collapse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch unclutter the menu by hidding collapse all
when all dives are collapsed, and expand all when all
dives are expanded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes Subsurface usable faster for those without a good internet
connection when they are opening an older data file.
While parsing, we are only feeding an vector of locations, after the
parsing is done, we traverse the vector searching for the information on
the web.
I need to also add a way to stop if there`s no internet connection - but
this will be another patch.
Also, fixed two small memory leaks from the old imp.
[Dirk Hohndel: cleaned up the whitespace mess]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... but discard an old disclaimer and runtime table if present.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to avoid visual clutter when replanning logged dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there are more than 100 samples, average some of them so we end up with no more than 100.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old behavior was kind of crude. Just smack the tags that were on the
displayed dive on all selected dives.
This seems to make more sense. We figure out which tags were added to the
displayed dive and add them to all selected dives. And we remove all tags
that were removed from the displayed dive from all selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old behavior was kind of crude. Just smack the tags that were on the
displayed dive on all selected dives.
This seems to make more sense. We figure out which tags were added to the
displayed dive and add them to all selected dives. And we remove all tags
that were removed from the displayed dive from all selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, we left the (UEMISSDA) in the path. This can never have worked
without the user manually correcting it to just show the drive letter.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we run out of space in the Uemis filesystem we return an error. The
user could reasonably unplug the SDA, insert it again and then retry to
continue the download (that's what we tell them to do). In that case we
need to make sure we start at the correct dive otherwise the same dives
keep getting downloaded over and over again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog didn't accept "OK" and store the dives downloaded / selected so
far if there had been an error. Especially with partial downloads from the
Uemis SDA this is something that is quite reasonable to want to do, so
allow exiting the dialog with OK even after an error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of writing each dive out to a file and reading that file back in,
let's just use the internal helper function that places the dive as XML
into a membuffer.
So much simpler, so much faster.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we simply failed silently without showing the user any
indication that something went wrong. That seems wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This disables planner UI elements in recreational mode that have no function
in that mode.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dive context menu:
After the addition of the item "Add image(s) from web" the item
immediately above is "Add images". It is proper to specify now:
"Add image(s) from file(s)" to make the distinction clear. I also
change "Shift times" to "Shift dive times".
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a new divelist context menu entry which asks for a URL. The file
is retrieved and if it is an image it is added to the cache and the url
is associated to dives as with local files.
NB this currently only works with URLs pointing directly to images. But it
should not be too hard to add the possibility to add a direction via an html
file and its image tags.
To test: open dives/test43.xml and delete the image and then add the URL
http://euve10195.vserver.de/~robert/wreck.jpg
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use more explicit variabel names and make the get timestamp function actually
return the timestamp rather than getting a pointer argument
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we delete a cylinder the gas changes in that dive may have to be
adjusted. We didn't do this at all in the past. With this commit we should
be doing this right for a single dive that is being edited.
This does NOT handle multiple dives being edited at the same time (or more
specifically - if you have multiple dives selected and delete a cylinder,
the dives that had the same set of cylinders (other than the displayed
dive) will get that particular cylinder deleted, but won't have their gas
change events (and sensor data in the samples) adapted.
Possibly we should simply prohibit deleting cylinders when more than one
dive are selected.
See #834
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the way to edit the profile of a manually added dive is really
counterintuitive: you have to first make some random change to the dive
information, then the profile switches in to editing mode.
This commit adds a simple context menu entry on the profile that is only
shown when the a manually added dive is displayed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XSLT conversions create V2 XML files, but we shouldn't abort when we parse
those without having the user informed about the potential slowness - all
XSLT based imports are slow, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, that was embarrassing. Just setting it on displayed_dive doesn't
gain us anything if it isn't transferred to the selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We assumed that a trip was selected when all of its dives were selected
instead of just remembering if the trip itself was selected. I'm sure
there was a reason for that but I cannot think of any. But a side effect
is that if you have a trip with only one dive in it and have that one dive
selected and edit it, after saving your changes you end up on the trip
(which is now also selected) and are no longer on the dive. And that seems
quite wrong.
The new code simply remembers that the trip was selected. And selects it
again if it was.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we run out of space in the Uemis filesystem we return an error. The
user could reasonably unplug the SDA, insert it again and then retry to
continue the download (that's what we tell them to do). In that case we
need to make sure we start at the correct dive otherwise the same dives
keep getting downloaded over and over again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog didn't accept "OK" and store the dives downloaded / selected so
far if there had been an error. Especially with partial downloads from the
Uemis SDA this is something that is quite reasonable to want to do, so
allow exiting the dialog with OK even after an error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the functionality to undo/redo removing of dives from trips. The
code calling remove_dive_from_trip has moved to the UndoCommands class.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Planned dives must be replanned while manually added dives must be edited.
Show error messages to handle wrong user input.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since most regulators have an intermediate pressure of 10bar
the minimum value is 10 while the max is 99.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the addition of gas reserves in recreational mode
we need to make sure that the first leg is short enough
that we have more gas left than the specified reserve
even when using small cylinders like LP72.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
OSTCTools is a windows based software by Robert Angeymar which performs
configuration upgrade, memory analysis and download tasks for H&W OSTC
devices.
Downloaded dives are stored in files (one archive each) with the raw
binary data heavily padded at the begining of the file, and some other
data not included in H&W dive header protocol as the device's serial
number.
The import function simply takes the raw data part of the file and lets
libdivecomputer do the parseing.
Then adds some additional info as OSTC reported dive number and serial
device number.
Please note that OSTCTools is *not* a real logging software, it simply
gets the DC raw data, so there isn't any information about dive site,
equipment and so.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adopts the planner to the needs of the recreational diver. Rather than immediately
starting to ascent doing deco stops this mode, this mode stays at the last manually
entered depth for the maximal time before mandantory stops appear (NDL). It does not
change gas but keeps using the last used cylinder.
TODO: * Grey out unused UI elements of the planner in this mode
* Start ascent before gas runs out (or into reserve)
* Do a 3min @ 5m safety stop.
Fixes#840
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
