To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only remaining use of the tripflag was to mark dives that
were removed explicitly from a trip, i.e. shouldn't be autogrouped.
Therefore replace the enum by a simple boolean.
Currently, there is no way of unsetting the notrip flag. But this
shouldn't result in a user-visible change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The when field gives the time of the first dive. Instead of keeping
this field in sync, replace it by a function that determines the time
of the first dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes more of the dive-site interface to return pointers
instead of UUIDs. Currently, most call sites directly extract
UUIDs afterwards. Ultimately, the UUIDs will be generally replaced
by pointers, which will then simplify these callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a first step in removing dive-site uuids, change the interface
of the get_dive_site_*() functions to return pointers instead
of uuids. This makes code a bit more complicated in places where
the uuid is extracted afterwards (needed NULL check). Nevertheless,
these places should disappear once pointers instead of uuids are
stored in the dive-structures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce a parser_state structure, which describes (most) of the
global parser state. Create such a structure in the entry routines
to the parser and pass it down to the individual functions. The
parser state is initialized and freed with the init_parser_state()
and free_parser_state() functions.
The main benefits are:
1) Isolation of parser state.
2) Keeping the global name space tidy.
3) Prevent memory leaks which could happen in truncated files by
freeing all the parser state after parse.
A somewhat controversial point might be that the individual
parsing functions are split in those that need parser-state and
those that don't. This means that there are now two versions of
the MATCH macro, viz. one for the former and one for the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently, the subsurface webservice was removed. Remove the corresponding
code in the parser. This removes a static variable, which was used
to generate unique dive-site ids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The variables country and city used in divinglog_place()
were never freed. Free them when the pointers are reset.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On parsing of dive computer extra data, key/value pairs are stored
in global state. They are added to the dive computer with
add_extra_data(), which makes a copy of the string. The local
copies of the strings are never freed.
free() the strings after storing them. The data still leaks in case
of unfinished parsing of extra_data tags, but this will be
taken care of in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
xml_parsing_units stores the units of the currently parsed XML
file. It is not used outside of parse-xml.c. Therefore, make
it of static linkage and remove the declaration from dive.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We traditionally only allow samples to have a time format of 'mm:ss', so
if you have a dive over an hour, you would just have a minutes field
larger than 60 minutes.
But Matthew Critchley is trying to import some dives from his VMS
Redbare CCR, and the sample timestamp format he has is of the type
'hh:mm:ss'.
That could be fixed by a xslt translation, but there's no real reason
why we couldn't just support that format too.
Reported-by: Matthew Critchley <matthew.s.critchley@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In visit_on_node() in core/parse-xml.c the name is extracted into
a static buffer. There seems to be no need for this being static,
as the name is only passed to the entry() function which (hopefully)
does not store a reference to the name anywhere.
If it does, this would need a *big* *fat* comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This the first of a set of cleanups related to the removal of 2
preferences: save_userid_local and userid. The commits are
ordered so that a sane running state remains, should a
bisect ever lands here.
Here, just read a git or XML logbook including the to be removed
preferences, as existing users can have this data sitting around.
The only thing done here is not to store the possibly read data
for the mentioned preferences.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
These are Deco N2 Low/High and Deco He Low/High events. They all appear
to be recorded at the same time, different events at same second.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Measured He is documented (in comment). Will need information if all
measurements are needed or just start/end. First case would be added to
dive prifle, possibly cluttering it, second would be extra data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This will record the ending battery status to extra data. Would need
info from CCR divers whether this suffices or if we should record also
the starting volatage or even every single reading.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
The match() function in parse-xml.c calls a very specific callback,
which doesn't take a context-parameter. To be able to call other
callbacks, split out the actual name-comparison.
Moreover, remove the "plen" parameter, as this was called with
strlen(pattern) in all cases anyway. Replace the old logic which
potentially accessed a byte beyond the end of name with a simply
classical C-style loop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The match() function compares a pattern with a name with
a twist: The name may either end in '\0' or '.'. If pattern
and name match, a parsing function is called on a buffer and
a destination value. The result of the parsing is not checked.
This seems awfully XML-specific and therefore move the function
from the general parse.c to the specialized parse-xml.c unit
and make it of local linkage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of divelog-importing it is crucial that parse_file()
can parse into arbitrary dive tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the last commits, the canonical-to-local filename map was made
independent from the image hashes and the location of moved images
was based on filename not hashes. The hashes are now in principle
unused (except for conversion of old-style local filename lookups).
Therefore, remove the hashes in this commit. This makes addition
of images distinctly faster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
...as the usuage is not anymore about a computer but
a momentary dive mode. Rename the end indicator as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This provides for reading of divemode change events from dive logs
and for writing them to dive logs. This applies to xml and git
divelogs. Divemode change events have the following structure:
event->name = "modechange"
event->value = integer corresponding to enum dive_comp_type (dive.c),
reflecting the type of divemode change (OC, CCR, PSCR, etc).
In the dive log file, the event value is written as a string that
corresponds to each of the enum values, e.g.
<event name='modechange' divemode='OC' />
This xml is also read from the dive log file and translated to an
appropriate value of event->value.
The file diveeventitem.cpp was udated to reflect this new way of
dealing with divemode change events.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
The hash field in the picture-structure was in principle non-operational.
It was set on loading, but never actually changed. The authoritative
hash comes from the filename->hash map.
Therefore, make this explicit by removing the hash field from the
picture structure.
Instead of filling the picture structure on loading, add the
hash directly to the filename->hash map. This is done in the
register_hash() function, which does not overwrite old entries.
I.e. the local hash has priority over the save-file. This
policy might be refined in the future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since all qt-helpers are defined in qthelper.cpp, there seems to be
no reason to have two include files. By unifying the two files,
duplication and inconsistencies are removed. The C++-only part is
simply compiled away with #ifdefs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This patch allows the planner to save the last manually-entered
dive planner point of a dive plan. When the plan has been saved
and re-opened for edit, the time of the last-entered dive planner
point is used to ensure that dive planning continues from the same
point in the profile as was when the original dive plan was saved.
Mechanism:
1) In dive.h, create a new dc attribute dc->last_manual_time
with data type of duration_t.
2) In diveplanner.c, ensure that the last manually-entered
dive planner point is saved in dc->last_manual_time.
3) In save-xml.c, create a new XML attribute for the <divecomputer>
element, named last-manual-time. For dive plans, the element would
now look like:
<divecomputer model='planned dive' last-manual-time='31:17 min'>
4) In parse-xml.c, insert code that recognises the last-manual-time
XML attribute, reads the time value and assigns this time to
dc->last_manual_time.
5) In diveplannermodel.cpp, method DiveplannerPointModel::loadfromdive,
insert code that sets the appropriate boolean value to dp->entered
by comparing newtime (i.e. time of dp) with dc->last_manual_time.
6) Diveplannermodel.cpp also accepts profile data from normal dives in
the dive log, whether hand-entered or loaded from dive computer. It
looks like the reduction of dive points for dives with >100 points
continues to work ok.
The result is that when a dive plan is saved with manually entered
points up to e.g. 10 minutes into the dive, it can be re-opened for edit
in the dive planner and the planner re-creates the plan with manually
entered points up to 10 minutes. The rest of the points are "soft"
points, shaped by the deco calculations of the planner.
Improvements: Improve code for profile display in dive planner
This responds to #1052.
Change load-git.c and save-git.c so that the last-manual-time is
also saved in the git-format dive log.
Several stylistic changes in text for consistent C source code.
Improvement of dive planner profile display:
Do some simplification of my alterations to diveplannermodel.cpp
Two small style changes in planner.c and diveplannermodel.cpp
as requested ny @neolit123
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Make functions in core/file.c, core/parse.c and core/import-csv.c
that were not used outside their translation unit of static linkage.
parse_date is moved from core/file.c to core/import-csv.c, since it
is used only there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The boolean "autogroup" was parsed as an integer. In principle OK, but
let's make the type more explicit by introducing a get_bool() function.
Suggested-by: "Lubomir I. Ivanov" <neolit123@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This should help us to move parsing that is not XML related to other
files, hopefully making the code cleaner.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
