There are a few more candidates, but these conceptually really
shouldn't be slots. getSurfacePressure() is an accessor and
loadFromDive() initializes the model with a dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive selection was initialized during data-reset. However,
this emitted a signal before all data-reset routines were run.
Ultimately, this led to access-after-free in the statistics code.
Instead, move the select_newest_visible_dive() signal from the
divelist-model to the process_loaded_dives() function. There
is no point in initializing the selection if the dive data
is cleared after all.
This change broke closing of the log, because the UI-selection
was not reset. Therefore, when clearing the data, clear the
selection before proceeding with clearing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to decoMode(). Thus, calls to in_planner() can be removed.
This is a more-or-less automated change. Ultimately it would
probably be better to pass the current deco-mode to the affected
functions instead of calling decoMode() with an in_planner
parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The icons shown in the dive list were rendered for every single
access. Render them only once. This supposes that the
defaultIconMetrics structure does not change once the icons are
rendered!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It simplifies reasoning about control flow a lot if it is known
that functions can't be invoked from a different part of the code
base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way the starting time of a new plan was set was bonkers:
1) PlannerWidgets::planDive() invokes DivePlannerPointsModel::
createSimpleDive().
2) createSimpleDive() calls DivePlannerPointsModel::
setupStartTime()
3) setupStartTime() emits a signal startTimeChanged()
4) startTimeChanged is caught by PlannerWidget and sets
the UI field
5) change of the UI field emits a timeChanged() signal which
is connected to DivePlannerPointsModel::setStartTime()
6) setStartTime() sets the time of the plan and displayed_dive
and emits dataChanged()
7) dataChanged() replots the dive()
8) Back in DivePlannerPointsModel::createSimpleDive() the diveplan
start time is overwritten with displayed_dive (the value are
equal owing to 6)
Wow!
But it gets worse:
9) The initial dive plan is set up in createSimpleDive().
Since the profile is drawn in 7) after clearing the displayed_dive
and before constructing the initial plan, the profile is shown
on a dive without samples. It therefore generates a dummy profile.
To make this somewhat less insane, remove the startTimeChanged()
signal in 3), explicitly set the start time of plan and dive to
the one calculated by setupStartTime() and explicitly set the UI
filed in the plannerWidget.
This still indirectly draws the profile via signals in a convoluted
way, but at it straightens out things somewhat. Most importantly,
the profile doesn't have to generate a fake DC.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are two sets of messages that tend to dominate the logs
- the RSSI updates from the Qt BLE stack
- the warnings about deprecated signal use in Kirigami
Neither of them provide any value to us when trying to find bugs; and
often they end up hiding the things that we really care about. So let's
just not log them - which is easy as we have our own message handler.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveHandler shows a context menu where a cylinder can be
chosen. This indirectly accesses the global displayed_dive
variable.
Remove this in a step to make the profile reentrant.
The code was quite ominous: instead of simply generating the
list of cylinders, a global model was reset and then accessed
with Qt's cumbersome model/view API. All this trampling over
global state can be removed by simply making the function
that generates the list globally accessible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of listening to the dive-data-model changed and
axis changed signals, update the profile items explicitly
once per plot() call. This avoids double replotting of the
dive items.
The old code had at least two replots per plot() call:
one after profileYAxis()->setMaximum() and one after
dataModel->emitDataChanged().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions return the maximum partial pressures in the
given dive. Obviously, being pure accessors, they should be
const.
This commit also replaces the macro generating these functions
by a call to a function taking a pointer-to-member. Arguably,
C++'s pointer-to-member syntax is just as horrible as macros,
but at least it doesn't mess with syntax highlighting of
my editor and should be better to debug.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveCalculatedCeiling profile-item has a recalc()
function, which calls "dataModel->calculateDecompression()".
This is a questionable reversal of control-flow: The
profile-item should paint the model-data not change it.
The code was supposed to be called under two conditions:
1) The value of the calcceiling3m preferences flag changed.
This code was buggy for two reasons: Firstly, the cached
value was always initialized to false, which means that
sometimes the first call was missed. Secondly, the
settingsChanged() functions was only called when closing
the preferences window, not when changing the flag in the
profile widgets.
2) The datetime of the dive changed. The whole control-flow is
pretty absurd (due to "bit rot"):
- The replan-dive command sends a date-time changed signal.
- The main tab changes the date-time and informs the profile.
- The profile sends a signal to the item.
- The item instructs the model to recalculate the
decompression.
- The model causes the profile to be redrawn.
In any case, the whole thing is moot, because the decompression
is recalculated for *every* profile plot in create_plot_info_new().
Let's remove the code from the DiveCalculatedCeiling profile-item
and the calculateDecompression() function, which is now not
used anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was not used anywhere. Moreover, remove a few
unused includes from qthelper.h. Surprisingly, a number of users
of qthelper.h depend on these, so readd them at the appropriate
places.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Arguably, the number of filtered dives is a matter of the divefilter.
Let's move it there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The shown_dives variable was reset by the dive_list code. Arguably,
the filter should keep track of the number of shown dives, so move
the resetting there. This means adding a new "reset()" member function
to the filter and call that instead of "updateAll()" when the core
data is reset.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing a dive, a DiveObjectHelper of the unmodified dive
was created to compare the edited with the old values. Since
the DiveObjectHelper is used here only as a pointless wrapper
around the formatting functions, call these functions directly.
However, note that the code is in principle wrong since the
change to the mobile-models, which do not use the DiveObjectHelper.
The real fix would be to reload the data from the model to prevent
going out-of-sync with respect to the formatting routines!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At this point (post grantlee), DiveObjectHelper is just pointless
glue code. Let's remove it from the printing code and call the
formatting functions directly. If necessary, move these functions
to core/string-format.cpp.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The mobile version of the list used string formatting functions
defined in DiveObjectHelper and declared in mobilelistmodels.h.
Very confusing. Move them to a separate source file where - in
the long run - all the string-formatting functions, which
are scattered all over the place, can be collected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The list of known tank types were kept in a fixed size table.
Instead, use a dynamic table with our horrendous table macros.
This is more flexible and sensible.
While doing this, clean up the TankInfoModel, which was leaking
memory.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far, the PreferencesDialog emitted a settingsChanged signal.
This meant that models that listened to that signal had to
conditionally compile out the code for mobile or the connection
had to be made in MainWindow.
Instead, introduce a global signal that does this and move
the connects to the listeners to remove inter-dependencies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We'll need this in order to be able to actually open dive files and
download things from a dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
in_planner() is problematic, since it is uses desktop-only
application state. Since the cylinder-model already has
an appropriate inPlanner flag, use this instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The in_planner() function is problematic, because it depends
on the application state that is only available on desktop.
If we ever want to port the planner to mobile, we have to get
rid of it. Luckily, the DivePlannerModel already has an
appropriate flag that can be used instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of programatically reload the completion models, listen
to the relevant signals in the models. To that goal, derive all
the models from a base class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were macros to auto-generate functions to reload the models.
One was only used once and therefore is pointless. The other can
be replaced by a function with a pointer-to-member-variable argument.
While doing this, adapt the coding style.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Qt's memory management scheme is completely broken and messes
with common expectations.
QObjects are organized as a tree. The children are destroyed
in the destructor of QObject. This means that they are destructed
after the destructor of the parent object has run and its
sub-object were destructed. Obviously, this makes no sense as
the child objects should be able to access their parent at
any time.
To restore the commonly expected deterministic order of
construction and destruction, one might simply do away with
Qt's silly object tree and organise things using classical
subobjects. However, that breaks with the Qt-generated UI
classes: The objects generated by these classes are *not*
destructed with the UI class. Instead, they are attached
to the widget's QObject tree. Thus these are again destructed
*after* the widget! Who comes up with such a scheme?
In our case this means that we cannot have models used for
TableViews as subobjects, because the TableView needs the
model to save the column widths in the destructor. Which,
as detailed above is called *after* the desctructor of the
widget! Thus, turn these models into heap-allocated objects
and add them to the QObject tree.
Funilly, this exposes another insanity of Qt's QObject tree:
Children are destructed in order of construction! One would
expect that if objects are constructed in the sequence
A, B, C one can expect that C can, at any time, access B and A.
Not so in Qt: The destruction order is likewise A, B, C!
Thus, take care to init the widgets before the model. Jeez.
Finally, print a warning in the column-saving code of
TableWidget, so that these kind of subtleties are caught
in the future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since dive.c is so huge, split out divecomputer-related functions
into divecomputer.[c|h], sample.[c|h] and extradata.[c|h].
This does not give huge compile time improvements, since
struct dive contains a struct divecomputer and therefore
dive.h has to include divecomputer.h. However, it make things
distinctly more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used by the DiveComputerDialog, which does not exist
anymore. The new tab uses the function in the corresponding
sorted model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of modifying the device table directly, call the undo
commands. Moreover, don't keep our own copy in the mode - show
the original version. Connect to the appropriate signals.
This means that the calls from the DiveComputerManagement
dialog have to be removed, since this mode of editing is
not supported. The whole dialog will be removed in a future
commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To implement undo-semantics, we want a longer-lived dive-computer-model
(currently, it is regenerated when the dialog is opened). Therefore, it
must be reloaded when the core data is reset. Do this like for other
models: listen to the dataReset() signal of DiveListNotifier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we want to include dive computer names in the undo system,
there should be visual feedback on undo/redo.
This would mean opening the divecomputer dialog, which would
appear quite strange. Therefore, add a tab. This is not ideal,
but consistent with the dive site tab, which probably shouldn't
be there either. In the future, the UI needs some rethinking.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Technically get_dive(i) could return a nullptr. But given the range for i that
can never happen. Still, the test is extremely cheap and doesn't hurt.
Fixes CID 354768
Fixes CID 354766
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In one weird case (suunto), the code in libdivecomputer.c
generates a device node directly instead of going the usual
way (setting the data in the dc-structure of the imported
dive). It is unclear to me whether that has to be that way,
as it depends on the chronological order of callbacks to
event_cb() and dive_cb().
Therefore add a device_table pointer to device_data_t
so that the downloader can add the device to this table. This
only adds the pointer, but does not yet use it in the
downloading code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a device_table parameters to Command::importTable() and
add_imported_dives(). The content of this table will be added
to the global device list (respectively removed on undo).
This is currently a no-op, as the parser doesn't yet fill
out the device table, but adds devices directly to the global
device table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we converted from QString to std::string, let's also use
std::vector instead of QVector. We don't need COW semantics
and all the rigmarole. Let's try to keep Qt data structures
out of the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
struct device is a core data structure and therefore shouldn't use QString.
QString stores as UTF-16 (which is a very questionable choice in itself).
However, the real problem is that this puts us in lifetime-management
hell when interfacing with C code: The UTF-16 has to be converted to
UTF-8, but when returning such a string, this puts burden on the caller
who has to free it. In fact, instead of looping over devices from C-code
we had a callback that sent down temporary C-strings with qPrintable.
In contrast, std::string is guaranteed to store its data as
contiguous null-terminated and C-compatible strings. Therefore,
replace the QString by std::string. Keep the QString just in
one place that formats a hexadecimal number to avoid any
potential change.
The disadvantage of using std::string is that it will crash
when constructed with a NULL argument, consistent with C-style
functions such as strcmp, etc. Arguably, NULL is different
from the empty string even though we treat both as the same.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a small proxy-model on top of DiveComputerModel so that clicking
on table headers makes the table sortable.
The UI feature here is not as important as the fact that the UI does
its own sorting and we can keep the device-table in the core sorted
differently.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We keep track of device, i.e. distinct dive computers with id in the core.
The corresponding code stuck out like a sore thumb. Firstly, because it
is C++. But more importantly, because it used inconsistent nameing conventions.
Notably it defined a "DiveComputerNode" when this is something very different
from "struct dive_computer", the latter being the dive-computer related
data of a single dive.
Since the whole thing is defined in "device.h" and the function to create
such an entry is called "create_device_node", call the structure "device".
Use snake_case for consistency with the other core structures.
Moreover, call the collection of devices "device_table" in analogy
with "dive_table", etc.
Overall, this should make the core code more consistent style-wise.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When moving dives between trips, the core moves the dives internally
and sends a signal to the model. The model adds and removes the dives
accordingly. However, when adding the new dive, the old trip hasn't
changed its position, so the ordering is wrong leading to an inconsistent
state.
Therefore, remove the dives first and then readd them. There could
still be pathological cases where this fails. However, in the short
term this is an improvement. Note that in similar cases, the dives were
indeed removed then added, so this case here seems to be an oversight.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
getDiveSelection() returns a vector of the selected dives.
Use that instead of looping over the dive table and checking
manually.
This removes a few lines of code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The get_trip_date_string() formatted, as the name implies, the date
of a trip. It was passed a number of parameters and had only one
caller, which would also add the location if it existed.
Therefore, move all that logic into the helper function and
name it get_trip_string().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing a divelog, import filter presets. If there are
equal names, import only if the presets differ. In that case,
disambiguate the name. This made things a bit more complicated,
as comparison of filter presets had to be implemented.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement a trivial model to provide the filter preset names
to the UI. Sadly, for now this features the QWidget/QML
column / name dichotomy. However, in this simple case that
shouldn't be too much of an issue.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a model that keeps track of a list of filter constraint and makes
them accessible from Qt. Sadly, this is mostly repetitive boiler-plate
code, but this is due to Qt's model/view-API, which is a perfect example
of how *not* to design a reasonable modern API.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder model is used both in the planner and the
equipment tab. We have three preferences for the pO2 that
is used to compute MOD: In the planner, there is one for
the bottom part of the dive and another one for deco.
Those are set in the planenr UI. There is another value,
controlled in the Tec Prefernces. That one should be
used in the equipment tab rather than the one from
the planner.
Fixes#2984
Signed-off-by: Robert C. Helling <helling@atdotde.de>
If the dive timestamp changes, the dive could move in the dive list. But the
current dive actually doesn't change (it's still the same dive, right?). Yet
we need to update the dive list as well as the shown dive (especially if this
is after adding a dive, which is first inserted with the current time and then
updated with whatever the user enters).
Fixes: #2971
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At some time, when introducing the global reset signal the filter
stopped being reloaded when loading a new log. This leads to very
strange UI behavior: dives disappear when editing fields unrelated
to the filter.
Therefore, when reloading the model, reset the filter. One might
argue whether this is the correct place. On the other hand, we
might even make the filter a sub-object of the dive-list model.
Let's think about this.
Partially solves #2961
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
core/device.h was declaring a number of functions that were related
to divecomputers (dcs): creating a fake dc for manually entered dives
and registering / accessing dc nicknames. On could argue whether
these should be lumped together, but it is what it is.
However, part of that was implemented in C++/Qt code in a separate
core/divecomputer.cpp file. Some function therein where only
accessible to C++ and declared in core/divecomputer.h.
All in all, a big mess. Let's simply combine the files and
conditionally compile the C++-only functions depending on
the __cplusplus define.
Yes, that means turning device.c into device.cpp. A brave soul
might turn the C++/Qt code into C code if they whish later on.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a previous commit, auto-filling of weight based on type was
changed to be only performed if the user hadn't already set a
weight, by testing for weight=0.
However, when the user edited the type and tabbed back and forth,
that counted as an edit and therefore the weight would not
change anymore.
To refine this, introduce an "auto_filled" flag to the weightsystem,
which is set if the weight is automatically filled and cleared if
the weight is edited. Update the weight if it was zero *or* auto-filled.
The flag is not saved to disk, but that should be acceptable. If the
user saves and reloads, we can assume that they meant the weight
to be set to the default value.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing from other software, it happens that weights are imported
without their type. When the user changes the type, the imported weight
is overwritten, which is not exactly a friendly behavior.
On the other hand, when changing the type after creation of a weight
entry, it is preferrable to set a default weight. This is convenient
for people who commonly use the same weight.
As a compromise, set the default weight only if it was unset. We
recognize this by a weight value of 0 g.
Fixes#2938
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
You cannot be at two depths at the same time (and it confuses
the planner). So give yourself at least 10 seconds.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When setting up a dive for replanning, we ignored zero length segments as those
tend to be generated by gas changes. But it is possible to enter those in the
planner and the replanning should not ignore those. So be
more clever about gas changes. Let's add 10 seconds so we are not at two depths
at the same time and help since add_stop also does not like zero length
segments (it thinks we are trying to replace a waypoint).
Fixes#2901
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
get_cylinder(d, i) is more readable than d->cylinders.cylinders[i].
Moreover, it does bound checking and is more flexible with respect to
changing the core data structures. Most places already used this accessor,
but some still accessed the cylinders directly.
This patch unifies the accesses by consistently switching to get_cylinder().
The affected code is in C++ and accesses the cylinder as reference or
object, whereas the get_cylinder() function is C and returns a pointer.
This results in funky looking "*get_cylinder(d, i)" expressions.
Arguably still better than the original.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A while ago, we introduced a preference whether O2 should
be considered narcotic. We used this when computing
best mix or when entering the He content via MND. But
we forgot to make the displayed MND depend on this
preference. This patch add this.
Fixes#2895
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In analogy to the timestamp -> QDateTime conversion, create a
common function.
1) For symmetry with the opposite conversion.
2) To remove numerous inconsistencies.
3) To remove use of the deprecated QDateTime::toTime_t() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move this function from maintab.cpp to qthelper.cpp. Since the
functionality was used in numerous places, use the helper function
there as well. This removes a number of inconsistencies. For example,
sometime setTimeSpec(Qt::UTC) was called, even though the
QDateTime object was already created with that time spec.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The divetripmodel.cpp, models.cpp and tankinfomodel.cpp source
files as well as the corresponding headers were listed as "general"
and as "desktop" models, i.e. twice. Remove the redundant entries in
the desktop list. This should have no consequence whatsoever.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The weightsystem- and cylinder-model headers were including "dive.h".
Inclusion of "equipment.h" is sufficient though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We already allow filtering by tags, but don't even show them on mobile.
That seems rather inconsistent.
First step is to make the tags available to the QML layer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The goal here is to remove a dependency on displayed_dive.
While doing so, make the model more general and display any dc.
Pass in the dc of the current dive instead of displayed dive,
since all other tabs are already converted to show data of
the current dive. The QStrings are cached since we generate
them anyway, so we may just keep them. Thus, there is no
danger of the dc becoming invalid.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of assigning to a ret variable and returning at the
end of the function, return directly from the various switch
branches. This is more idiomatic and consistent with the other
models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As we do in most other models, use begin/endResetModel() to
reset the model. This is distinctly less errorprone than
the add/removeRows() version as we don't have to check for
empty ranges, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To reset the core data structures, the mobile and desktop UIs
were calling into the dive-list models, which then reset the
core data structures, themselves and the unrelated
locationinformation model. The UI code then reset various other
things, such as the TankInformation model or the map. . This was
unsatisfying from a control-flow perspective, as the models should
display the core data, not act on it. Moreover, this meant lots
of intricate intermodule-dependencies.
Thus, straighten up the control flow: give the C core the
possibility to send a "all data reset" event. And do that
in those functions that reset the core data structures.
Let each module react to this event by itself. This removes
inter-module dependencies. For example, the MainWindow now
doesn't have to reset the TankInfoModel or the MapWidget.
Then, to reset the core data structures, let the UI code
simply directly call the respective core functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We show an icon whether there are pictures and whether they are
before or after the dive. Thus, the list models must emit the
proper signals when the pictures of a dive change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code is rather complex. Firstly, we have different representations
of pictures throughout the code. Secondly, this tries to do add the
pictures in batches to the divepicture model and that is always rather
tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QVector doesn't have a function to insert a range of pictures,
which we will need for undo of image adding/deletion.
Moreover, std::vector gives us stronger guarantees. For example,
if capacity is large enough, it guarantees that there will be
no reallocation and thus iterators stay valid. I have not found
such a guarantee in the Qt docs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive-pointers are stable and the dive picture model is reset
if a selected dive is removed, so there is no risk in keeping
pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though the functionality is seemingly trivial, this is a bit
invasive, as the code has to be split into two distinct parts:
1) Post undo command
2) React to changes to the divelist
Don't compile that code on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with equipment, use our table macros for pictures.
Generally tables (arrays) are preferred over linked lists, because
they allow random access.
This is mostly copy & paste of the equipment code.
Sadly, our table macros are quite messy and need some revamping.
Therefore, the resulting code is likewise somewhat messy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For undo of picture manipulation, it will be crucial that the
model and the core have the same order of pictures. The first
sort criterion will be time, the second filename in the case
that two pictures have, for whatever reason, the same timestamp.
However in the core we us C-strings and thus sort byte-wise
using strcmp. In the Qt-part we use QStrings, which sort according
to unicode encoding. To enable consistent sorting, change the
Qt-part to std::string, which uses a C-style 0-terminated string
as its backing store.
One might argue that in general filenames should use system-encoding
and therefore use std::string instead of QString. However, a
broader conversion to std::string turned out to be very painful,
since Qt is (deliberately?) difficult to use with std::string.
Notable all the file-manipulation functions don't take std::string
by default. Thus, this commit only converts the internal data
of DivePictureModel, but continues to use QString for the Qt-facing
interface.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To display changed SAC values it is necessary that the models
emit changed signals when cylinders are edited. An alternative
might be that the undo commands emit dive-changed signals themselves.
Fixes#2814.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the planner the undo commands for adding / editing dives were
only called if not on mobile. This is from days were mobile didn't
have undo commands. We can remove these now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was only one caller of MainWindow::setupForAddAndPlan() left
and that caller immediately called DivePlannerPointsModel::createSimpleDive().
Thus, we might just as fold the former in the latter and thus
concentrate all the prepare-dive-for-plan business in one place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, the MainWindow doesn't have to extract the plan from
displayed_dive. This is a tiny step in an attempt to detangle
the interfaces. The bigger goal will be to make displayed_dive
local to the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calculating variations, they were sent to the mainwindow,
which updated displayed_dive accordingly. Do this directly
in the planner-model.
The idea is to detangle interdependencies and to make the
code reusable (planner on mobile?).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be temporarilly used by the planner to mark consumption of
air at the surface. Do this by creating a new function add_cylinder,
which replaces add_to_cylinder_table() and takes care of always adding
a dummy cylinder at the end of the table. Make the original
add_to_cylinder_table() local, so that it cannot be accessed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It appears that some misguided compiler / library combinations crash
on &vector[0] for empty vectors. Even though very unfriendly, they are
technically correct, so let's remove these constructs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I would have bet money that Android used to send stderr to the logcat
log, but apparently it doesn't (anymore?). So in order to be able to
have a chance to debug weird cloud storage issues on Android, let's do
some wholesale replacement of fprintf(stderr,...) with our own version
of the INFO macro that we long ago borrowed from libdivecomputer (and
rename it to ensure we don't have a conflict there).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In 9310d72943, resetting of the dive
sites was moved to DiveTripModelBase::reset(). This seemed like a
good idea, because it means that the location list is reloaded
every time the dive list is reset.
Unfortunately that function is only used on mobile, thus on desktop
the dive site model is not updated. Do that in
MultiFilterSortModel::resetModel(), because this is always called
when the dive list is reset. Desktop differs from mobile in that
two different models are used depending on whether we are in list
or in tree mode.
Fixes#2749
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When initializing the fulltext-cache and the dive-list, every
100 dives a notification was shown. I had a feeling that this
made startup significantly slower, but that could have been
purely psychological.
Therefore I measured and indeed, removing the fine-grained
notification, it becomes *significantly* faster. For a 3500
dives test log with mobile-on-desktop:
Initialization of the fulltext: 1350 ms -> 730 ms (-46%)
Initialization of the divelistmodel: 689 ms -> 113 ms (-83%)
Let's remove the fine-grained notification. There *is* a visual
indication of work-in-progress anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The planner does not know about events except gas
changes. But if the dive comes from the log, we
should preserve the dive computer events. At least
those that happend before we started to delete
waypoints to let the planner take over.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The DivePictureModel kept a pointer to picture for each entry.
Firstly, this is dangerous from a data-consistency point of view.
Secondly, the entry wasn't even used anywhere. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of assigning to a QVariant ret and returning at the end,
return directly in the various switch-cases. This makes the code
more readable, and is more idiomatic C++, as it avoids unnecessary
copies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Parts of the code were not compiled on mobile, because they used
the undo-command infrastructure. However, since mobile now also
compiles that, we might as well remove the conditional compilation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing cylinders or weights directly in the table widgets,
no warning was shown if multiple dives were affected. To solve this,
emit signals from the respective models and catch them in dive
equipment tab. Not very nice, but it works for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't overwrite the full cylinder when editing a single field.
Implement three "modes": editing of type, pressure and gasmix.
Don't consider individual fields, because some of them are
related. E.g. you can change the gasmix by setting the MOD.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On desktop, we have two CylindersModel concurrently: One in the
planner and one on the equipment-tab. They act differently, because
the former modifies displayed_dive directly, the latter issues
undo commands.
To differentiate, we used the in_planner() function. However, that
appears extremely brittle, especially when combined with undo-commands.
Therefore when generating the model, pass in a parameter that says
whether this is for the planner or the equipment tab and use
that flag to decide how to act.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Call an undo command when editing cylinders, but only if on
the EquipmentTab.
To keep code changes small, make a copy of the cylinder first,
then edit the cylinder as before and then either call an undo
command (EquipmentTab) or overwrite the old cylinder (Planner).
The memory management here is a bit strange: Since the undo-command
itself makes a deep-copy of the passed in cylinder, we only do
a shallow copy. If we have to change the type, we allocate the
string with an std::string, so that the memory is automatically
freed at the end of the function. However, this means that in
the planner we have to make a deep copy first, swap old and
new cylinder and finally release the old cylinder. Certainly
not ideal, but for now the pragmatic thing to do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is tricky, as when browsing through the types-combobox,
the user is presented with presets without actually changing the
dive. We do not want an undo-command for every change-event in
the combo-box.
Therefore, implement a scheme analoguous to the weight-editing:
A temporary row can be set / committed or reset. Sadly, the
code is more complex because we have to consider the planner,
which is not included in the undo system.
Firstly, the planner uses a different model, therefore all
interactions are channeled through setData() with special roles.
Secondly, in the planner we shouldn't place an undo command,
but simply overwrite the dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
add() and remove() are not used anymore since this is done using
undo commands. The planner uses CylindersModel instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The CHANGED macro was defined in the cleanerTableModel header.
Since it had only one user, expand it there. The macro was very
questionably anyway, as it would set the local "vString" variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A small code consolidation:
With one exception, all targets of the switch statement would
test for CHANGED(). Instead do the test once and exit early.
This changes the behavior of the function: if not changed, there
will be no more dataChanged-signal. However, this appears to be
the correct thing to do anyway. And it is easily changed if
it matters after all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Cylinder-editing is controlled by undo (either by saving a planned
dive or by using the equipment tab). There is no point in setting
the dive_list_changed flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinders in the events must be reordered if we remove
a cylinder. To avoid duplication of code, move the reordering
function into qthelper.cpp, though it might not be ideal
there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The CylinderModel always accessed the global "displayed_dive" and in
some special cases also "current_dive". To implement cylinder undo,
the model should work on an arbitrary dive. Therefore, in analogy
to the weight model, make the dive dynamic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Turn the code in CylindersModel that creates a new cylinder for
addition into its own function to avoid code duplication. This
will be used from the undo commands.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To mark invalid dives, we use a struck-out font, which was a static
variable at translation unit scope, i.e. initialized at application
startup. Sadly, this crashes on iOS.
It is unclear when we can initialize fonts. Try to move initialization
to the constructore of DiveTripModelBase and make the font a member
of that class. For consistency, also make the invalidBrush a member
of this class.
This now means that the diveData function cannot be static anymore,
since it needs access to the font and brush. But OK.
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mark invalid dives in the dive list by striking them out
and rendering them with a grey color. The color-change is
not sufficient, because the default model delegate ignores
color hints if the item is selected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive list is cleared or updated, the entries in the
divesite-model become stale and therefore the divesite-model
(with the actual name LocationInformationModel) also must be
updated. This was done manually in some parts of the code and
forgotten in others. Therefore, do it directly in the clear()
and reset() function of the dive list-model.
This might be a bit of a layering violation: why should one
model call into another if they are not in parent/child
relationship? However, this seems easier than introducing
a global "reset dives" function that coordinates the models.
Moreover, it does not appear 100% safe: if the clearing of
the divesite model causes accesses to the divelist-model,
they happen in the midst of a model reset and we had horrible
bugs with that kind of things. However, I don't think that
should happen.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The setData() function was used to edit the number of a dive.
However, that doesn't appear to be functional. Therefore, remove
the code. There is a context-menu entry "renumber dives" for that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The diveListNotifier.divesSelected() signal is used to inform the
models of a selection change. It sent the current dive as a second
parameter. This is redundant, because the only sender of the signal
sets current_dive just before sending the signal. Remove the
parameter, which appears to be an artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveTripModelTree::divesSelected() returned early if
no dives were selected. Thus, the current dive was not
updated. Remove the check for no dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is only used in the mobile UI where the sort direction is fixed and we
refer to dives based on the tree model. So the terms used and the concepts
that these rely on should be guaranteed to be valid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MobileSwipeModel is probably not an ideal name, but all I could come up with.
One of the main complications here is that our list is reversed with respect to
the source model. We should change that one day. Probably by moving the
sorting down to the core-model.
Since looking up the source row is somewhat expensive, the lookup is cached for
a single entry because accesses come in bursts for a single dive. This should
be a good compromise and avoids keeping track of a full row-to-dive array.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In analogy to the DiveTripModel split, derive MobileListModel from a base
model that exports the roles, etc. This will allow us to create a second model,
which nevertheless possesses the same roles and all that without too much code
duplication.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we want to add a second model, but not have to manage two models
everywhere, create a class MobileModels that contains both of the models. When
calling reset() on that class, it will reset both of the models, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the undo-command for importing dives also on mobile. This should make the
whole disconnect-model shenigans unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive data is cleared, all pointers in the undo-stack become stale.
Desktop explicitly called Command::clear() in that case, but mobile doesn't.
Thus, move the clear() call into DiveTripModelBase::clear()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The weight-undo commands need this. Therefore, we have to compile the
WSInfoModel if we want to access the undo commands from mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To act as a drop-in replacement (at least as much as possible),
move the roles from the old DiveListModel to the common base
model of mobile and desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a model which represents all top-level items and, potentially, one
expanded trip as a flat list.
Pass down roles to the source model and let the source model handle that. We'll
have to do some ifdef-ery, but so be it.
Additionally, compile the base model on mobile as well.
This contains a couple of hacks to make things compile at all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once the the mobile app uses the new models, this will be necessary
to get the correct number of filtered dives after startup.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is an idle "optimization": The compiler may now not need
to access the vtable when calling virtual functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If compiled on mobile, on change of the current dive, don't send
a signal, but send changed-event with the CURRENT_ROLE for both
dives that changed status (previously selected and newly selected).
Mobile does not use this yet, but will do so with the new flattened
models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This role returns true if the given trip contains the current
dive. This will be needed by the mobile list model to decide
if a newly added trip should be expanded right away.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use this role to test whether a dive is the currently displayed dive.
This will be needed to transport changes of the current dive to
the mobile list models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The number of dives was updated when the model of the list was
changed. Since we removed the multi-threading, the model is
not disconnected/connected anymore and therefore we don't get
the appropriate signal. Instead of introducing a different
signal, make the shown-value a Q_PROPERTY. Thus, we can easily
send a changed signal if we have to.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a combo-box where the user can switch between "fulltext",
"people" and "tags" filtering. Connect the combobox to the
already existing filter-code.
Dirk: make combo-box smaller by using a smaller font and restricting
the width. Setting both maximum and preferred widths gives more
consistent results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the DiveFilter class on mobile to update the filter. This
is mostly for convergence of the mobile and desktop models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
