We now never remove units or percentage signs, and always just compare
the string data, so we should remove the hacky arguments that are no
longer used.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This matches the pattern of unit conversion, and will allow us to remove
all the code that uses the old complex "CHANGED()" macro that tries to
remove units or percent signs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whittling down on the string parsing that doesn't check user-specified
units. Still need to handle temperatures (and will do percentages to
match the pattern too), but this is getting us closer to always honoring
user-specified units.
With this you can say that you have a "10l" cylinder at "3000psi", and
it will do the right thing (it's basically a 72 cuft cylinder in
imperial measurements).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just adds (and uses) a string_to_pressure() to parse pressure units
correctly when filling in cylinder pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's currently only used for the setting of the cylinder switching
depth, but now that one should work with user-specified units (so you
can set a max depth in feet even if you use metric, and vice versa).
In the future, if we also make the unit preferences something you can
pass in (with user preferences as a default argument value), we might
want to use this for parsing the XML too, so that we'd honor explicit
units in the XML strings. But the XML input unit preferences are not
necessarily at all the same as the user preferences, so that does
require us to extend the conversion functions to do possibly explicit
unit preference selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The C library doesn't use const char pointers for legacy reasons (and
because you *can* modify the string the end pointer points to), but
let's do it in our internal implementation just because it's a nice
guarantee to have.
We actually used to have a non-const end pointer and replace a decimal
comma with a decimal dot, but that was because we didn't have the fancy
"allow commas" flags. So by using our own strtod_flags() function, we
can now keep all the strings we parse read-only rather than modify them
as we parse them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make it use 'weight_t' and hide the "grams" part inside the type. That
was the whole point of the weight_t type, after all. Returning a
"double" was always bogus, since we internally always do integer grams
(and the function actually used "rint()" to get all the rounding right
anyway).
As a result, it's now called "string_to_weight()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit c3fe1a9e9f ("Get rid of pointers to dive structures in the
UI") I was a bit too aggressive moving away from pointers to dives.
This is only needed for pointers that are held across operations that
could change the dive_table. I figured that it wouldn't hurt to get rid of
some more pointers as well, but it turns out I was wrong. The current dive
that we store in the Cylinder and Weight models can be a dive that isn't
in the dive_table at all: the multiEditEquipmentPlaceholder. And when
using the diveId we end up finding the original dive in the dive_table and
therefore modify the wrong structure.
This undoes two thirds of the above mentioned commit.
Reported-and-analyzed-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out this function can be called when there is no valid dive - so
only protect those parts that dereference the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The assumption that the pointer will keep pointing to a valid structure is
fundamentally flawed. And even if that is true today, it might change in
the future - just don't do it. Use the diveId instead.
The exception is when you own the structure and use it within one UI
interaction during which any way to change the dive_table is disabled
(e.g., while adding / editing a dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have the wonderful Qt string functions. Let's use them to make the code
simpler and easier to read.
Suggested-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The imperial cylinder sizes are not just in cubic feet: they are in
cubic feet of gas at STP. So the imperial/metric difference is not
just about converting blindly from liters to cubic feet, you also have
to take the working pressure of the cylinder into account.
This was broken by commit f9b7c5dfe9 ("Make units in cells
consistant in CylindersModel"), because those poor sheltered Swedish
people have never had to work with the wondrous imperial cylinder
sizing, and think that units should make _sense_. Hah.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of always assuming that all numbers are in the users locale
weight units, allow the user to say "kg" or "lbs" explicitly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Note that this is IMHO the wrong fix. Because we shouldn't just ignore the
units, we should do correct conversions.
Before this patch, if the user is in metric mode and then types in 4.5kg
or 10lbs for a weight, Subsurface ignores the entry and throws it away.
Very much not the expected behavior.
With this patch Subsurface will take the value, but ignore the unit and
assume that the user meant kg (since it's in metric mode). Still not
really the expected behavior for 10lbs (which is now 10kg), but if the
user typed 4.5kg (which admittedly is much more likely), then with this
change Subsurface will do the right thing.
Fixes#395
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The css was done by me in the first days of subsurface for Qt, and it
was a code that I was never proud of. Mostly because I tougth at the
time that it was better to write it into CSS than to create a new class
just to take care of the size of the default cell height on a tree view.
Now I see that it was a biased approach since it created issues on
dark color schemes and it also didn't make a 'native' experience on
Gnome or OSX, only on KDE.
This fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows platform translation/ folder contains Qt translation
files as well. This results in extra languages in preferences.
From now we filter these translations and choose only those matching
^subsurface_*.qm$
Fixes#339
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show language instead of country, sort the list.
Show country in brackets to avoid ambiguity for locales like
de_DE and de_CH.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt has a really strange API for directories. when you create a QDir
and set's the currentDir on *that* QDir you created, it's for the
whole application and not just for that variable. Then when the
variable is out of scope, the directory doesn't change back - ugh.
The solution is not to call setCurrentDir on the newly created QDir (which
was quite good since it's also a code cleanup. )
[Dirk Hohndel: modified to undo the far less elegant fix I had made in an
earlier commit]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These complete the ability to select languages from the preferences panel.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user first opens the application the default language is
selected; this can be changed to a hardcoded one by going to system
preferences and choosing the one you want.
Restart required.
Fixes#136
[Dirk Hohndel: whitespace fixes, removed qDebug() call, rephrased the
message displayed prompting the user to restart.]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do not support rows larger than a single page as the
PrintLayout algorithm will enter an infinite loop,
therefore we put a limit of 15 lines for the location text.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Removed the "Visible:" header on the column selector. It doesn't
have to be there, and it's not in the similar equipment column selector
- PO2 --> pO₂ (and others)
- Use same initial case in the units selector in preferences
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the names that we have in our "default set" we need to store the
English name so Subsurface will "do the right thing" when opening the file
in a different locale.
With manually entered names in a local language there's not much we can
do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still trying to fix the same issue that I already tried to address in
commit e0b70b82ca ("Fix translation of weightsystem names") and before
in commit dc03b7e7d6 ("We need the correct context to translate event
names").
I missed the WeightModel. Hopefully this was indeed the real fix.
Fixes#312
(I know, I keep saying that)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very much the same as in commit dc03b7e7d6 ("We need the correct
context to translate event names"). I didn't pay enough attention when
reading the bug report and missed that the weight system names were also
not correctly translated.
Fixes#312
(I hope this time for real)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface creates a lot of singleton instances on demand, but nothing
ever deleted them. Since they are singletons, these memory allocations
are technically not leaks. However, they clutter the output in valgrind
and other memory analysers, hiding the real issues.
The solution is to delete these items at exit. For the models and for
gettextFromC, the solution is to use a QScopedPointer, which will delete
its payload when it gets destroyed. For the dialogs and other widgets,
we can't do that: they need to be deleted before QApplication exits, so
we just set the parent in all of them to the main window.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there are no trips at all, we have to skip the Yearly statistics
alltogether, including the header line (that should display all the
dives added together).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now only use a slightly large font for the "Dive #" entry.
All other font sizes remain at 9px.
Another change is that we now attempt to use 11px for
individual row height. This makes the table at least 12px bigger
(n_rows * increment), but does not cut letters like 'g',
which go slightly bellow the font baseline.
Perhaps this can be improved later by adjusting the font
and row sizes again.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Use the same case for the first letter in the dive table column headers,
use '%' for both gases in the planner, and show "Start time" instead of
"Starttime".
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We update the values for divemaster, buddy and etc...
Rating and visibility are currently displayed as "x / 5"
values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Following the new layout for the profile print, we separate
the used gas like so:
AL80 / EAN33 / ...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
ProfilePrintPmode::truncateString() was not really needed,
because long text *should* be trunctated by the table itself.
Also we now are going to have multiple lines for notes,
so the auto-trim should work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Previous show and save code would have aborted at the first invalid
weight system. This makes sure we save and show all weight systems up
until and including the last valid.
If we had:
integrated: 1kg
belt: 2kg
ankle: 3kg
And changed belt to 0 kg, we would have only saved integrated 1kg, and
nothing about the belt or the ankle weights. This will save all of them,
and show all of them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code aborted at the first invalid cylinder. This instead finds
the last valid and prints all the ones up until that one.
Fixes#295
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds trip based statistics to the Yearly Statistics
view.
Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think we should actually fill the app with tooltips and
whatsthis hints. justsain ;p
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better positioning of the text on the table cells. On KDE systems the
text got too near the line that divided the cells, this way the text is
placed on the middle of the cell.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit hacky and simply adds the title to the message text when
compiling on a Mac, but hopefully this will be enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Two errors fixed.
- With no location set, the summary line would start with a ','.
- When auto creating a trip for a manually added dive or when editing the
dates of dives in a trip, the timestamp for the trip was not updated
after editing the dive.
Fixes#293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
O2 + He + N2 = 100%
(well, there are some other gases, but this is close enough)
Since N2 can't be negative that means we should refuse any change where
O2 + He > 100% (or o2.permille + he.permille > 1000).
Fixes#280
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The number 0 means "this dive has not been numbered". So manually
assigning this seems wrong.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user doubleclicks on the number of the dive in the dive list,
this will present to him a dialog to change that number. Pressing enter
will renumber the dive if there's no dive with the same number already.
Fixes#288
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just reverts some wrong changes that I'v done on a
past commit ( sorry ) and correctly handles the selectDive,
by using a IDX instead of the dive pointer, as dirk told me
it's extremely error-prone since the pointer can change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's very important when programming via Model/View, in gtk or qt,
to not mess with the model data outside of the model. We were
deleting stuff that the model controlled outside of the model, so
it thought that there was still data there. This fixes the deletion
part, but there are also lots of other parts that I'll tackle in
the next commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The air types model had a font bigger than the
other models, this patch creates a data() method
that correctly delivers the correct font.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What happened before was that the AirTypes model was only being updated
when the user requested to change the air by clicking directly
on the Air, in the planner ( but not on the Air Table. ).
This fixes it by calling 'repopulate' whenever the cylinder model
changes ( by adding, removing and changing something.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the edition of alphanumeric input,
columns like depth accepted '23ft', '20m' or '30', with
an inplicit conversion to the unit. But the code ignored
that the input could have a 'ft' or 'm' ( ot anything else
for that matter.
Signed-off-by: Taiane Ramos <exhora.tat@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- you can no longer delete a tank when its gas is in use
- therefore you can no longer delete the last tank
- when you change the gas mix of a tank, the corresponding segments in the
dive change as well
- when changing gas for a segment the correct available gases are offered
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make the planner work this adds a new column to the Cylinder widget
(depth - for the depth at which we want to change to a certain gas
during deco).
This also tries to hide that column in the equipment view and hide the
start/end pressure columns in the planner view. Oddly that fails :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelist.c:
get_dive_date_string()
get_short_dive_date_string()
get_trip_date_string()
MinGW support for *printf and parameter positions (e.g. %1$d)
is horribly broken. Instead of implementing *proper* support
for this feature Microsoft decide to ignore the standard (again)
and they implement new functions with the '_p' suffix,
such as 'sprintf_p', which seem to be available from a 2003 runtime.
To top that 'sprintf_p' is not really a 'sprintf' but rather
a 'snprintf'.
It seems that the MinGW people ignore the issue and do not provide
wrappers of any sort, or at least for the current recommended compiler
for Qt 4.8.5 on Windows - which is a 4.4.0. A note of warning;
inspecting how MinGW does certain things in headers such as stdio.h,
can ensue bad dreams or other negative effects on to the viewer.
This forces us to move the following functions from the 'back-end'
(divelist.c) to the 'front-end' (qt-gui.cpp) and use QString.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add units to the SAC in the print-out, reduce max depth in metric to one
decimal place, and leave some more characters of the notes to be printed..
Signed-off-by: Robert C. Helling <helling@atdotde.de
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of varying font (screen) DPI we use pixel sized fonts
when printing. Apparently 8px does not look that good on Windows
default fonts, but kinda OK on Linux. We compensate by
increasing the font size and table rows to 9px.
Also decrease the padding between the table and profile to 5px.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
CylinderModels::setDive() and WeightModel::setDive() have
potential to pass the 'last' argument to beginInsertRows() as
a negative number which triggers an assert that 'last' cannot
be smaller than 'first'.
Patch attempts to fix that by only calling beginInsertRows()
when there is at least one row to insert.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The end pressure was appearing in the column headed "O2"
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are other models ( Tree Models and Model Items
) that are not affected by this commits, this is
already a good cleanup but it can be extended
to also fix those two other possibilities.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Second model converted to be less boilerplated,
there are right now 7 models that will need to
be ported. each model can remove around 30 to 40
LOC, so this is not such a bigger improvement,
but it's an 'keeping an eye on the future'.
Also fixed a bug where the returned value was dummy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Model View system in Qt is *very* verbose, this is the
beginning of a series of patches that will concentrate
the boilerplate somewhere and reduce the amount of lines
and will also try to make the code cleaner and easyer to
understand,
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Add a helper function to unify the calculation of the
weight display string, instead of having the same calculation
in two places in the code.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface stores weight values in grams. When displaying lbs,
the dive list was not rounding the converted weights up, but
rather truncating the value at the decimal place. The equipment
list was rounding the converted weights up. This gave two
different displayed values for the same weight value.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a couple of classes and some other modifications
in PrintLayout that handle the printing of tables under a profile.
models.h : ProfilePrintModel
The class uses a 'struct *dive' to output all required data
for a certain dive at specific rows and columns. It also handles
font formatting and text alignment.
modeldelagatates.h : ProfilePrintDelegate
The class is used only for drawing a custom grid for profile tables.
PrintLayout::createProfileTable()
The function is used to create and setup the profile table object
PrintLayout::printProfileDives()
The function now has correct padding of dive profiles on a page
and also the printing of actual tables below them.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code marked the dive list as changed on any
of the changes in the model, this was incorrect since
the user could just cancel the edition, wich means
that the divelist shouldn't be marked as changed at all.
when the user clicks on'accept', and the item is indeed
changed on the dive list, then we mark_divelist_changed
to TRUE
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'changed' member on Cylinders and weigth models to mark when
one was changed or not. Only the changed data should be inserted on
the selected dives, so if the user changes the cylinders on a multi
edit, there's no need ( and it will actually break things if we did that )
set the weigths too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
When updating the weight system model we have to remove the old ones and
then correctly count the new ones.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is correct C. But debuggers in C++ mode are broken and can't display
the global variables. While I hate having to do this change, I hate not
being able to debug my software because of broken tools even more.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code to initialize the weight systems from the last datafile loaded
had not been brought over from the Gtk version.
We now correctly update the data structure when loading file (but not yet
when editing values).
Most likely the same needs to be done for the tanks as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current QTextDocument implementation is slow due to
HTML parsing. By using QTableView with QAbstractTableModel
we boost the performance of the table print drastically.
This patch completely replaces the old solution.
There is a hidden QTableView widget which is populated
with all data and rendered using a QPainter attached to
the printer device.
A couple of new classes are added in models.h/cpp
that handle the table print model and these are then used
in printlayout.h/cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Working Press didn't correctly updated when there was a 'bar'
or 'psi' in the string ( and that was defalt behaviour );
The o2 didn't correctly updated when there was a '%' on the string
(and that was default behaviour ),
The He didn't correctly updated when there was a '%' on the string,
and that was also default behavior.
Now all of them correctly updates.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a follow up commit to the previous one that
enabled cancel for cylinders, everything in the commit
log for the cylinders also applyes here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the default 'Cancel' action correctly cancel
the cylinder edition. This is needed only because
we bypassed the default behavior on Qt that took
care of this, because we wanted to have more control
on how the view would update the items accordingly
with wich one of the cylinders were selected
on the edition pane - the pressure and size of the
cylinders needed to have it's data set, but the Qt
Model/View system *thinks* that cancel-edition is
simply 'do not commit the edition data, then.' wich
would not work with us, because we passed the strange
data already. So, I created a backup data that serves
us very well. When the user cancels, this backup data
is added back on the cylinder, making everything as
it was before.
[Dirk Hohndel: removed the inadvertendly added boost header]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the combobox behavior on the inline edit
to what it was ( well, similar to ) the GTK version,
up and arrow keys will walk you to the list of choices,
and it will update the other data as soon as you walks over it
one drawback is that you cant ( for now, since I do have a
very big headache at the moment ) cancel, since the cancel
will just forgets the item and do not call 'setData' on the
model, but we already called it while walking on the list.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Add this helper so that we can easily wrap the required
memory release after calling get_dive_date_string()
(fixes a small memory leak).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
So during my Maui trip, I had a short hiatus in diving, causing
subsurface to start a new trip for the last day of diving. I could have
just started the old gtk branch to fix it up, but decided that I might
as well try to implement the "merge trip" logic in the Qt branch instead.
This is the end result of that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we don't have any manually set pressure data, show the data from the
samples instead. It uses an italic font for this case, mainly because I
couldn't figure out how to gray things out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's just distracting. Leave it empty. No helium should be visually
very different from actual trimix, and for oxygen, zero means something
different anyway (it's air). In neither case is '0.0%' a good string to
show, just show it as empty.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes us use the same linear calculations as we did in the Gtk
branch. We don't take compressibility into account, since tank
manufacturers don't seem to either. A Luxfer AL80 is 11.1 liters, and
with the standard (non-compressibility) calculations, 80 cuft of air at
3000 psi is 11.094 liter, so that is the right model to use.
Also, stop with the horrible "units in edited numbers" stuff. It uses
up precious space, and doesn't look any better. If the user asked for
cuft, give him cuft without making a big deal about it.
Oh, and if the working pressure doesn't exist, sizes are always in
liters. That's what we did in the Gtk branch, that's what we do here.
Again, no reason to even bother stating units, it's not helping.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do gas mixes in permille, not in percent. Some people really like
using the value they got from the analyzer, which is generally something
like 29.4% or whatever. So don't truncate percentages to integers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since no one else approximates gas volumes at higher pressures, we
shouldn't do that either when converting imperial tank names (cuft @
working pressure) into wet volumes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't even begin to explain what got me to write this in the first
place. It makes no sense from any angle I look at it...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the entries for years bold, keep the months non-bold.
It's still a sea of data, but this is an improvement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
