Since this is now in C++, we don't have to use our crazy
TABLE_* macros.
This contains a logic change: the dives associated to a
dive site are now unsorted.
The old code was subtly buggy: dives were added in a sorted
manner, but when the dive was edited the list was not
resorted. Very unlikely that this leads to a serious
problem, still not good.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the taxonomy is now a real C++ struct with constructor
and destructor, dive_site has to be converted to C++ as well.
A bit hairy for now, but will ultimately be distinctly simpler.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use std::vector<> instead of fixed size array.
Doesn't do any logic change, even though the back-translation
logic is ominous.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code was wild: For the yearly statistics it would allocate
one entry per dive in the log. Of course, it would also leak
C-style strings.
Convert the whole thing to somewhat idiomatic C++.
Somewhat wasted work, because I'd like to convert the whole thing
to the new statistics code. But let's finish the conversion to C++
first.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The roles DIVE_IDX and SELECTED_ROLE were used for the old selection
system and removed in b8e7a600d2.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- show the correct gasmix in the profile;
- make gases available for gas switches in the profile after they have
been added;
- persist gas changes;
- add air as a default gas when adding a dive.
This still has problems when undoing a gas switch - instead of
completely removing the gas switch it is just moved to the next point in the
profile.
Signed-off-by: Michael Keller <github@ike.ch>
- standardise the naming;
- use it consistently;
- apply the 'samples < 50' only when putting manually added dives into
edit mode - everywhere else manually added dives should be treated as
such;
- do not show a warning before editing a manually added dive in planner.
Signed-off-by: Michael Keller <github@ike.ch>
The lambda that created the list of gases took a copy not a
reference of the planned dive. Of course, that never had its
gases updated. Ultimately this would crash, because this sent
an index of "-1" on change.
Fix by
1) Using a reference to the dive, not the copy
2) Catch an invalid "-1" index (by Michael Keller <github@ike.ch>)
Fixes#4188
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently editing of planned dives that have been merged with actual
(logged) dives only works if the 'Planned dive' divecomputer is the
first divecomputer, and this divecomputer is selected when clicking
'Edit planned dive'. In other cases the profile of the first
divecomputer is overlaid with the profile of the planned dive, and the
first divecomputer's profile is overwritten when saving the dive plan.
Fix this problem.
Triggered by @SeppoTakalo's comment (https://github.com/subsurface/subsurface/issues/1913#issuecomment-2075562119): Users don't like that planned dives show up as their own entries in the dive list, so being able to merge them with the actual dive after it has been executed is a good feature - but this wasn't working well until now.
Signed-off-by: Michael Keller <github@ike.ch>
The old code was leaking memory. Use std::unique_ptr<> for
ownership management.
This is still very primitive and divetags are kept during
application lifetime. There should probably be some form
of reference counting. And the taglist should not be global,
but attached to the divelog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The deco timestep is a parameter to the plan() function. There
seems no need to define this as a global macro. Probably some
code reshuffeling artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The combo-boxes (cylinder type, weightsystem, etc.) were controlled
by global models. Keeping these models up-to-date was very combersome
and buggy.
Create a new model everytime a combobox is opened. Ultimately it
might even be better to create a copy of the strings and switch
to simple QStringListModel. Set data in the core directly and
don't do this via the models.
The result is much simpler and easier to handle.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Q_FOREACH and foreach are anachronisms.
Range based for may cause a performance regression: it can
lead to a copy of shared containers (one reason why Qt's
COW containers are broken). However, as long as there is no
user noticeable delay, there is no point in analyzing each case.
And also no point in slapping an 'asConst' on every container
that is looped over.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
qthelper.h is an absolute monstrosity and it is unclear what
report_info and SSRF_INFO have to do with Qt.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The automatic conversion from char * to QVariant failed to
compile for me. Let's hint that this should be interpreted
as a string. No idea, why this happens for me, but apparently
not on CI.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix the persisting and use of gradient factor preferences for dive
profiles in the mobile version.
Also rename the mobile backend gradient factor settings to make it
obvious that they are used by the (not currently enabled) planner.
Signed-off-by: Michael Keller <github@ike.ch>
Mostly irrelevant std::move() stuff of copy-on-write Qt objects,
a few real bugs, a timestamp_t downconversion and some codingsyle
adaptation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unfortunately Coverity doesn't understand that most Qt data
structures are copy-on-write. It's a mis-feature of Qt, but
it is the way it is. Thus, passing by value is not an issue.
Out of ca. 25 warnings only two were legit. Let's silence
the others by either std::move()ing or passing by reference,
as would be idiomatic C++, which Qt is not.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Include unused tanks in merges of multiple logs into a single dive if
the 'Show unused cylinders' preference is enabled.
Also rename the preference (in code) to `include_unused_tanks` to
reflect the fact that it is already used in more places than just the
display (exporting, cloning dives).
Simplified the cylinder model to make forced inclusion of unused tanks
dependent on use of the model in planner.
Leaving the persisted name of the preference as `display_unused_tanks`
to avoid resetting this for all users - is there a good way to migrate
preference names?
Signed-off-by: Michael Keller <github@ike.ch>
There was this completely weird loop that the planner-widget would
call the planner-model to get the current rebreather mode, which
would then access the dive in the planner widget. Just keep those
things in the planner widgets.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only user of the DivePlannerPointsModel and the
GasSelectionModel is the planner. Let's keep these models
there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The gas and dive-type models were repopulated in the
diveplanner model. The former are used in the planner.
However, the latter is also used outside of the planner,
when editing non-planned dives. Thus the former shouldn't
be repopulated by the latter, but by the code that needs
it.
Side note: repopulating the dive-type model seems to
make no sense whatsoever since the values never change,
but let's keep it for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The mode was accessed via the global `displayed_dive`. In an effort
to remove globals, access it via the DivePlannerPointsModel instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The current dc global makes no sense on mobile. Therefore,
move the logic of the currently displayed dive computer
to the profile widget and remove the dc_number global
variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The signals/slot names for dive selection changes were a mess.
Unify on divesSelected(). Firstly, selectionChanged() is a Qt
thing. Secondly, it is consistent with tripSelected().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The trip selection code was an awkward layering violation.
Whereas dive selections due to dive undo-commands trickled
down via DiveTripModel-->MultiFilterSortModel-->DiveListView,
for trip editing, the DiveListView directly intercepted the
TripEdited signal.
Instead, mimic the dive-selection code. This is a bit longer
but more consistent and logical. The undo/redo of trip changes
is now also a "programmatical" change of the selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After sending a selection-change signal, there follows a current
dive changed signal. Combine these two into a single signal, since
usually the current dive is changed when the selection is changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the global dc_number from the
DivePlannerPointsModel and the CylinderModel, pass them
in the respective initialization functions.
The dc_number global might not make sense on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This tries to encapsulate the management of the current dive and
divecomputer in the selection code. The current dive is alreay
set by setSelection(). Add a new parameter to also set the
current divecomputer. If -1 is passed, then the current
computer number is remained. This will allow us to audit the code.
Because for now, the whole "current dive computer" thing seems
to be ill-defined.
This fixes a bug: the dive-computer number wasn't validated
when making a new dive the current dive. The new code has some
drawbacks though: when selecting a whole trip, the validation
will be called for all dives in the trip and thus the dive computer
number will depend on the dive with the lowest amount of dive
computers in the trip. This will need to be fixed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parser API was very annoying, as a number of tables
to-be-filled were passed in as pointers. The goal of this
commit is to collect all these tables in a single struct.
This should make it (more or less) clear what is actually
written into the divelog files.
Moreover, it should now be rather easy to search for
instances, where the global logfile is accessed (and it
turns out that there are many!).
The divelog struct does not contain the tables as substructs,
but only collects pointers. The idea is that the "divelog.h"
file can be included without all the other files describing
the numerous tables.
To make it easier to use from C++ parts of the code, the
struct implements a constructor and a destructor. Sadly,
we can't use smart pointers, since the pointers are accessed
from C code. Therfore the constructor and destructor are
quite complex.
The whole commit is large, but was mostly an automatic
conversion.
One oddity of note: the divelog structure also contains
the "autogroup" flag, since that is saved in the divelog.
This actually fixes a bug: Before, when importing dives
from a different log, the autogroup flag was overwritten.
This was probably not intended and does not happen anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the only caller was C++ code, this can be done in
C++ code, which removes memory-management headaches.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix a bug that results in dive plans outside of the configured risk
profile being produced when planning a CCR dive with the first segment
set to open circuit.
`d->dc.divemode` is already set in `setRebreatherMode`, which is
sufficient, and congruent with the setting of other dive parameters,
like `diveplan.gflow`.
Signed-off-by: Michael Keller <github@ike.ch>
