This function was just needlessly complicated. For one, it
considered the position of the line, but that is never changed
since redoing the positioning code. Moreover, it does in
lots of lines what is a very idiomatic operation: a
one-dimensional affine transformation. Let's shorten the
actual calculation to two lines.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This label is put to the right of the corresponding curve,
so it should arguably be centered vertically. At least to
me this looks more natural.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The time axis might need some space and the average depth item
puts a formatted depth at to right of the profile. Consider
these when calculating the right border.
Since I found no way to turn of the average depth, this creates
a permanent border, which might or might not be a good thing.
Contains some refactoring of the label-size functions provided
by DiveTextItem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The usual increments (leading 1, 2, 4 or 5) don't look
natural for the time axis. Therefore special case the
time axis and to increments in 1, 2, 3, 4, 5, 6 or 12
parts of a minute or second.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was used to check wether a screen-point
is located on the profile. Bizzarely, this was done by
transforming into local coordinates and checking
min/max value. Simply check the screen coordinates
directly. Moreover, make the function return whether
the point is inside the region, not outside the region,
to make logic more straight forward.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Hide thumbnails, which are out of the shown range. This became
necessary when converting to absolute scaling.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing from relative to absolute scaling of the char
elements, positioning of the picture thumbnails was broken.
To emulate the old behavior, add a function to DiveCartesianAxis,
that allows positioning with respect to the axis on the screen.
To simplify tuning of the poctuire positions, name a few
constants explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The picture thumbnails were recreated on every profile render,
even when zooming / scrolling. In that case, we should only change
the positions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a potentially expensive operation (e.g. interpolation of
pressure values), so don't recalculate the plot data for every
redraw.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Positional bool parameters to control the rendering of the plot
have been a pain. We are down to one parameter (instant),
but more will be readded, so let's use the opportunity to
control rendering with a flags parameter.
Sadly, C++ has no reasonable way of defining flags that I know
of. Either the identifiers leak (enum), or can't be trivially
ORed (enum class) or are weakly typed (int). Let's just use an
integer for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code used the maximum / minimum values of nine-minute
intervals to indicate maximum / minimum depths. This does not
work well when zooming, since the labels will get sparse.
Instead implement a primitive peak finding algorithm, that
searches for the deepest peak in the whole plot and then
repeats the procedure for the right and left sides, leaving
out a certain distance to the origninal peak. This is repeated
until there are no more peaks found.
Only peaks of a certain prominence are considered, which
conveniently gives us the valleys.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use variable intervals for printing temperature and heart
beat labels. Obviously, so that the labels don't become
sparse on zooming, but also to make them not too crowded
on mobile / small screens.
This doesn't work for depth labels, because these labels
use data provided from the profile.c core that doesn't
know about the size of the chart.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a bunch of conditionally compiled code on mobile
that had special hiding/unhiding rules.
Try to unify that with the desktop code by introducing a
"simplified" flag. This certainly breaks and will have to
be finetuned. In particular, I can't test CCR dives, which
are treated specially on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Avoid "overshooting" of the profile items by linearly clipping
the first and last segment to the boundaries of the time-axis.
Sadly, quite a lot of code, because every profile item is
slightly different.
In particular the pressure-segment handling was rewritten.
It now stores the begin and end of each segment to draw
the appropriate text items.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Due to bit-rot the gas pressure and gas type were displayed on top
of each other. I don't understand the meaning of the old code
[log10(log10(axisRange))] (!). Therefore let's just add the height
of the label to separate the labels.
Probably needs some fine-tuning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was a rather trivial change: simply pass in the first
and the last second to the plot function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
That variable was only used in a single function and
always reset at the beginning of the function. No point
in being a member variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Only plot the zoomed range. Currently this passes the sample
before and after the range, so it generally "overshoots" by
one sample in each direction. The plan is to do clipping
on the first and last polygon segment later on.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We were using the QGraphicsScene machinery to zoom into the
plot. This not only zoomed into the dive, but into the whole
thing. In general, one couldn't see the axes anymore.
Instead, adjust the range of the time-axis according to the
zoom-level and position.
Of course, the code isn't adapted to that and the result
is comical. The chart features will have to be fixed
one-by-one. Oh joy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the zoomLevel is reset for every plotDive() call,
because the zooming is done via the QGraphicsScene. However,
this does not work well (e.g. axes are likewise zoomed) and
in the future a change of the zoom level will cause a replot.
Thus, remove the zoom-reset in plotDive() and do it explicitly
when switching dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a constant, no point in keeping it as a member variable.
Contains removal of a pointless #ifdef (guarding against mobile,
but code not compiled on mobile), a typo-fix in a comment and
replacement of Qt's idiosyncratic qreal by double.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two somewhat redundant flags for the axes: the position
(left, right, bottom) and the orientation (up-down, left-right, etc).
Replace the latter by an inverted flag: if true, the axis is
up-down or right-left, i.e. the opposite of what one would expect
for a normal graph.
Set the flag in the constructor and remove the setOrientation()
function.
Sadly, the code is a bit complex, because screen coordinates are
top-to-bottom. Who thought that would be a good idea?
Note: this also fixes the placement of the ticks of the time
axis.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were virtual functions to calculate the label colors
based on the value of the label. However, these functions
only returned constant values. Therefore, just set these
in the constructors.
Thuse, a few virtual functions and derived classes can be
removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was only used in the constructor to create the pen for
the grid lines. Not need to keep it around.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The visibility of axis text / lines is never changed, so set
in axis constructor.
Moreover, instead of rendering the lines/text and then setting
them invisible, do not render them if invisible.
The whole thing appears superfluous, since the proper way to
not show lines/text is to just not call updateTicks on the
axis. But in the future we might want to have axes with text
but no lines, so keep for now.
Since this means breaking out the text / line rendering
into their own function, we might rename some variables to
make them (at least somewhat) more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rounding the axes dimensions to "nice" number may have been a
good idea, but for the time-axis it feels weird.
Therefore revert the time axis to the previous behavior:
range is set according to the data. To differentiate between
time an other axes, use the position: the time axis is the
only axis at the bottom. Yes, that's ugly but pragmatic.
Since we have that flag also use it for the special casing
of the text-display. Spares us one virtual function dispatch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The integers were simply rounded to integers, which might give
ugly intervals (e.g. multiples of 3). Use the code of the
statistics tab, with one modification: take care not to
use intervals below the given precision. The statistics work
differently: there, the precision is adjusted according to
the interval size, not the other way around.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ticks were recalculated twice per plotDive() call:
1) When updating the position of the axes in updateChangeLine()
2) After setting the bounds in plotDive() via setBounds()
Remove the first instance. updateChangeLine() is called in
only one place [from plotDive()] and therefore, the recalculation
is always redundant. Moreover, rename the function to setPosition(),
since it doesn't do any animation at all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to animate the position of the dive event items
when the size of the axis changed. However, that doesn't work
since quite some time. The axes size are changed when
1) switching dives
2) resizing the drawing area
In the first case, the dive event items are fully recalculated.
In the second case, animation speed is set to instant, since
resizing of windows is done continuously on any reasonably
modern desktop anyway. It might make sense on mobile, where
size changes are discontinuous, but there we use static
profiles anyway. Moreover, I checked a few applications and
none of them had animations when switching orientation of
my tablet.
Let's just remove this disfunctional thing and replace it
later, should someone complain.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The partial-pressure-axis was the only DiveCartesianAxis
child that had its own code to set the bounds. The bounds
of all other axes were set in plotDive().
For consistency, do this here as well. Thus, the whole
class can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The number of ticks was generated for each axis with custom
code. This code was not aware of the size of the profile and
could result in overly dense or sparse ticks.
Generalize the generation of the ticks. For now, round tick
values to integers. In the future, try to use more "nice"
looking values as we do for the statistics tab.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of a host of virtual functions, let the base class
(DiveCartesianAxis) do the formatting of the axis labels.
To do so, it needs to know how to convert the internal
representation (e.g. mm) into the displayed value (e.g. feet).
Moreover, this transformation has to be adapted when changing
the locale-setting, therefore do it for every plot() call.
The transformation itself cannot be a simple linear translation,
because we have non-absolute display units, namely °C and °F.
Thankfully affine transformations are enough though.
Only one custom formatter remains: the time axis. It might
be a good idea to remove the virtual function and do this
via a flag.
This is all done not so much for code simplification, but
because for a general layout of the axis labels, the
axis has to understand the values of the labels and not
only handle them as opaque texts.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of calculating the label sizes of the axes when
relayouting the chart, calculate them at construction time.
To do so, pass the digits before and after the decimal comma
to the constructor.
This is not so much an optimization thing, but rather an
first stab at more general label rendering. Time, of course,
will always be an exception. But hopefully the remaining
values can be done more generally.
Note that currently this code is a total mess. For example,
the labels for the temperature axes are not converted to
F if needed. And therefore also not shown. This will need
some major rethinking.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All this did was setting changed to true. Obviously an
artifact, since that is done in the constructor of the
base class anyway. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is bike-shedding: Instead of two setMinimum()/setMaximum()
calls, use a single setBounds() call. A few axes (notably depth
and time) always have a 0 as lower bound. However, this will
change once there is a proper zooming functionality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The placement of the axes was done independently of the
plotting, e.g. when settings changed. Presumably,
for performance reasons. However, since the axes may
depend on whether a dive has heart-rate data or not,
this simply is not viable. To make this work, one
would have to remember whether the previous dive
showed the heart-rate, etc. Not worth it - always
reposition the axes. It should not matte performance-
wise.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I doubt that this is necessary, but since most of the rest
of the profile code passes "isGrayscale" to "getColor()",
do the same here for consistency.
To avoid storing the isGrayscale flag, just create the pens
at construction time and store those.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no more reason to render the profile in printMode.
DPR is also supported in normal mode.
Moreover, don't scale the DPR down by fontScale. If we
have to scale down the fonts, we'll have to do this
differently without squeezing the rest of the profile
features.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The event-icons are positioned according to the top-left
corner (as is usual in computer circles). For the flag
icon it seems more natural to use the bottom of the pole.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePlotDataModel was saved with every event to access the
depth. However, since the depth never changes, we can simply
save the depth instead.
Also, since we only need the model to access the plot_info,
pass the plot_info directly. As noted in a previous commit
message, I believe that Qt models are a very bad choice
for intra-application data transfer. They should only ever
be used to interface with Qt.
And since touching this code, pass duration_t instead of int
to depthAtTime() to make the callers less cluttered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of looping over the whole data via the Qt model,
do a simple binary search. Yes, this is premature optimization,
but I had to.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When placing the event icons, the timestamp is looked up and
then, the depth is checked which repeats this operation.
Remove the first instance of this lookup, as it is completely
redundant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is code to dynamically show/hide event icons of a certain
type. The same code is used to hide generally non-interesting/
redundant items.
Instead, don't even create these items. Yes, this is idle
premature optimization.
A loop over all created event icons to hide them can be
removed, because the icon is hidden anyway on construction
time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no user of this left, because the device-pixel-ratio
is now passed directly to the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On iOS there was special code to scale event icons with DPR
(device pixel ratio). However, that became redundant, when
printing started to also use DPR to scale the icons. Now,
on iOS icon sizes where multiplied twice with DPR.
Let's remove that and, if it is broken, try to fix it
at the correct place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This looks much better on print-outs. The remaining event icons
still need to be converted to SVG.
SVG created by Lubomir I. Ivanov <neolit123@gmail.com> and
made compatible with the Qt SVG renderer by BS.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For better scalability, we might replace the dive event icons
by SVGs. Since rendering SVGs is potentially very slow, cache
the pixmaps when the scene is generated.
Note: this does not yet do any SVG rendering, only the caching
of pixmaps.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tissue percentages were realized as 16 independent polygons.
That didn't work at all with the new absolute scaling.
Reimplement the item and blast it onto a pixmap. Not only is
this artifact-free, it also should (hopefully) be quite a bit
more efficient than painting numerous lines.
In contrast to the old code, this does access the plot_info
structure directly instead of using the model. Not so much
for performance reason, but rather to make things more robust:
We have a strongly typed language. Why would we shoehorn data
through the weakly typed QVariant and mess with wierd
index-arithmetics. Makes no sense to me. Qt-model have to
be used for interfacing with Qt. They are terrible for
intra-application data transfer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rendering resets the size, which now recalculates the axes.
Therefore, plotDive() must be called. The callers were doing
the opposite: call plotDive() first, then draw().
To make it easier for the callers, present a single interface
that handles these subtleties.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The chart items were laid out in relative terms with respect
to a fixed scene size (100.0, 100.0). This simply does not
cut it when resizing the chart. Why should the axes always
occupy the same fraction of the chart independent of the size.
Moreover, this led to basically unmaintainable code.
Resize the scene according to the viewport and do
absolute placement of the items. This breaks the layout,
but at least now we have a chance to fix things
somewhat reasonably.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile would reload for many settings-changed signals.
It didn't listen to the deco-info-changed signal, because
that had no effect (which seems to be a bug).
Since this flag should indicate whether the deco-info is
shown and therefore a change should replot the profile,
let's listen to the corresponding signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The grid color is saved on construction, no need to pass a parameter.
Note that this fixes a bug where the color was passed as animation
speed. Ooops. That's what you get from weak typing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is less hassle, than passing these around as parameters.
Note: The values are stored but not yet used ("position" has
not use yet and gridColor is still passed as parameter).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To properly layout the axes, it is necessary to specify on
which side of the chart they are located.
There is already an "Orientation" enum. However, that gives
the direction (top-to-bottom, etc.), but not the position.
It might become obsolete in the future, since the direction
can also be expressed by setting min and max accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveTextItems were redrawn on every paint() call. This was
a prohibitively expensive operation (converting the text into
a path, drawing an outline, etc.), which was called numerous
times.
Instead, render the text only when changing into a QPixmap
and blit that pixmap in the paint() call.
This will make it possible to do absolutely positioned
DiveTextItems. So far they were placed relatively in
scene coordinates ranging from 0-100(!).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The text and the brush are the two properties of text items
that change dynamically. To avoid complexities concerning
redrawing, set them concurrently instead of in two separate
calls.
Since setting one of the properties requires a full redraw,
there is no performance advantage in setting them individually.
This fixes a theoretical bug: the colors of axis labels were not
updated appropriately. However, it seems like value-dependent
labels weren't used anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Alignment and scale of DiveTextItems are never changed. Therefore,
pass them at construction time. This makes things much easier
if we want to cache the rendered text [currently the text is
rerendered at every paint() event].
This also removes the "parent=0" default parameter of the
constructor, because inadvertently leaving out the last argument
led to a subtle bug.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To layout the profile we need to determine the height
of texts. Add versions for a DiveTextItem and a static
function, which is passed the scale and dpr. The latter
is used to setup items, where we do not necessarily
have a text at creation time (e.g. the tankbar).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To properly layout the profile we need to know the expected space
required by the vertical axes. In the general case, format the
the text "999". For the partial-pressure-axis, use "0.99".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The printFontScale is used to scale up fonts (and icons) when
rendering to high-DPI devices. With absolute scaling, this
will also be used to scale the size of different chart
regions, line thickness, etc. Therefore, give it an more
appropriate name. "Device pixel ratio", which is a well
established term, seems to appropriately describe the
concept.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since there (currently) is no interactive widget on mobile, there
is no point in compiling it. This was a bit more complicated than
expected, since there were other source files (divehandler.cpp
and ruleritem.cpp) which reference ProfileWidget2 and therefore
need to be removed. Otherwise, the dreadful MOC produces unresolved
references.
We could now remove all the conditional compiles in
profilewidget2.cpp, but let's keep them for now. We might have
to readd a number of them later, when making the mobile-profile
interactive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The print mode is passed on construction, not retroactively.
This function thus became unused.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the interactive ProfileWidget2, just
use the ProfileScene to render the profile for printing,
export and mobile. One layer (QWidget) less.
This removes all the kludges for handling DPR on mobile.
Thus, the rendering will now be off and have to be fixed
by redoing the scaling code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Setting the profile and grayscale mode of the profile via
functions is from a time when the same profile widget was
used for printing and the UI. It is simpler to set the mode
when constructing the object and not deal with changes.
To prepare for this scenario, take the flag at construction
time. This still keeps the callers as-is. These will be
adapted later.
Logically, then the printFlag also has to be set in
DiveCartesianAxis at construction time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cartesian axes use animSpeed to animate changes. Instead
of passing down the value to the respective functions, the
speed was stored in the ProfileScene and the axes would
access it there. Very messy. Let's just pass down the speed.
There still are back-references from the axes to the scene,
notably to place labels "outside" of the scene. Let's try
to remove them later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This finalizes the split between interactive (ProfileWidget2)
and non-interactive (ProfileScene) parts of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the ProfileScene does the actual rendering, it needs
access to the "printMode", "isGrayScale" and "fontPrintScale"
variables. Move them down from ProfileView to ProfileScene.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was moved to the desktop version. Enter the profile in
the constructor. Somewhat surprisingly, this seems to work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since using separate profile-instances for print/export,
we never exit print mode. Therefore, the mode parameter
can be removed. This is a preparatory commit for passing
the printMode at construction time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Part of separating the static (for printing, export) and
dynamic (UI) parts of the profile. This is still quite messy
with many direct accesses from the ProfileWidget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This simply subclasses QGraphicsScene and is used as
a drop-in replacement. The plan is to step-by-step
move rendering functions there until the non-interactive
code can only use the scene and doesn't have to use
the QGraphicsView. This will hopefully remove quite
some conditional code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The usage of the DiveProfileItems has changed (axes, etc. are passed
at construction time). Update a comment accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The font print scale is now set once on construction and this
function can therefore be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of intializing the text fields and then changing the
font scale via signal-rigmarole, pass down the font-scale
at construction time.
Since the fontPrintScale is only set in print mode, we also
can access it directly instead of testing for printMode.
Since the DiveTextItem is not updated using signals anymore,
the connected flag can be removed.
The commit is larger than I had hoped for, but this makes
things ultimately less brittle.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The constructors of Time- and TemperatureAxis don't do anything.
In reasonable modern C++ we can simply reuse the constructor
of the base class with a "using" directive.
The point here is to simplify followup commits that will
add additional parameters to the constructors of the axes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was only used internally - there is no point in an
accessor function. It only makes grepping more complicated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Not having to readjust the scale on-demand will make the
code distinctly simpler. Let's just pass it once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, we can keep the scale factor constant during existence
of the view. For now, this is simpler than adapting existing
text elements. We might want to make this more flexible later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The current way of handling the "print scale factor" is
complex: The text fields are added and later resized via
signals. Things could be simplified by just redoing the
chart when changing the scale factor.
Moreover, in the future we will want to adapt the size of the
axes depending on the size of the texts.
As a first step, factor out the creation of the profile-widget.
This can then be used to recreate the profile when changing
the scale factor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The alternative spelling "visibile" made searching for this
function very annoying. That makes removing it even more
satisfying.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Very annoyingly, to render the profile for printing / export,
the profile still had to be show()n, thus requiring a parent
window.
Analysis of qmlprofile.c showed that this was due to the
transformation matrix not being properly set up on non-show()n
scenes.
Instead, we can simply render via the QGraphicsScene
(circumventing the QGraphicsView).
The code was factored out into the ProfileWidget2::draw()
function. This will hopefully make it easier to change
the size-code of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was just a stub to make the setVisible() function a "slot".
Since there are no more signals using it, remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The visibility of the gas lines is updated on every profile-redraw,
which is performed when the preferences changes. No need to have
these signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The visibility is set on every redraw, which is called when
the preferences change. No need for these signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is rich: when changing to profile-mode, the calculated
tissues are set according to the prefs.calcalltissues flag.
The DiveCalculatedTissue::setVisible() function ignores the
parameter and insteads sets the visibility according to the
expression "prefs.calcalltissues && prefs.calcceiling".
This is because the function is also called by signals,
which provide the wrong parameter.
Pass the correct parameter in the first place. Remove the
crazy signals and the overridden setVisible() function,
which ignores its parameter, later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, setting the visibility of chart features is a mess. It
is done when switching to the profile state and then via signals,
when the preferences are changed.
However, when the preferences are changed the chart is replot anyway.
So let us simply set the visibility on chart replot. Then in
a follow-up commit, the signals can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
