It appears to send a first sample with a water temperature of 0 C. If the next
sample contains a more likely water temperature, overwrite the first one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer tries to be super careful in what it tells us. It only offers a
density value if that is something that the dive computer explicitly supports,
otherwise it just offers back a flag. We need to then update the density value
ourselves.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The undo stack is only relevant to the dives that were loaded at the
time the command was executed. If a file is closed, by specifically
closing it or opening another file, then the undo commands will
reference dives that aren't available anymore. Clearing the undo stack
ensures that we don't crash or accidentally do some undefined
modifications to the currently open file.
Signed-off-by: Michael Andreen <michael@andreen.dev>
To import media files from the web, increas the size of the
dialog box and allow several URLs separated by newlines.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
I forgot to clean up the CHANGELOG file for the previous release, and some of
the commits in this release were missing CHANGELOG entries.
This should make sense now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tweak the Lat/Long coordinate parser to allow coordinates of the form:
12.1049° N, 68.2296° W
The coordinate parser works by tokenizing coordinates one at a time.
Consequently it is invoked twice on user input to get latitude and then
longitude. Normally, after parsing the first coordinate, intervening
characters such as , or ; and any whitespace would be discarded from the
input before parsing the second coordinate. Prior to this patch, if the
coordinate format was in degrees followed by a sign (N is a sign in this
example), the parser would skip the bit of code that fast forwards past
any intervening separators and whitespace (, in this example). This
resulted in coordinates of this form not being accepted, because the
second parse would start with , 68.2296° W and reject this as an invalid
coordinate.
To rectify this, the bit of code that fast forwards past separators and
whitespace has been broken out from the tokenization loop and performed
as a final step after a single coordinate has been completely parsed and
validated. Doing it this way makes it independent of the state of the
tokenizer, so that the fast-forward code will always execute once a
coordinate has been successfully parsed.
I've also centralized the list of allowed separators into its own static
string; this is necessary as part of the patch but should also make
allowing additional separator characters between coordinates trivial in
the future, if needed.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
When changing the theme to a dark theme, also change the
statistics theme. The code is a mess, because it crashes
when setting the theme right at the beginning. Therefore,
there is a "theme has been set" flag. Also, this directly
accesses the ThemeInterface singleton object. I have no
time to fight QML, sorry.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This way they are available in both mobile and desktop version.
Without this, the icons weren't shown on iOS and Android.
Fixes#3214
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For reasons I don't understand, the device pixel ratio was taken into account
twice. And as a result the transformation applied to the profile made us show
only the top left part of it - but enlarged (depending on the DPR).
This code fixes that problem by simply forcing the transformation used by the
painter to be the identity matrix. I worry that this could be wrong in some
situations, but for now it seems to fix the problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can have attachment of fairly arbitrary size (which should
be extremely useful for long libdivecomputer logs). This isn't quite as
intuitive as what we did before - the user needs to pick an email app to
share with), but that doesn't seem too bad - and also... this way they
can share logfiles via Dropbox or analyze them in other apps).
If the file share fails for some reason, we fall back to the old method
with passing the combined logs as body to the support message.
As an implementation detail this keeps the correct path for the app log file around
(this was stupidly overwritten before).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a merge mishap creates inconsistent data for a dive in git storage,
where the dive references a dive site that no longer exists, the app
would crash when trying to open the cloud storage.
I don't think a NULL dive could ever happen, but this seems fairly cheap
insurance.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When in the planner, ESC should cancel the plan.
However, when the user manipulates the dive-handles in the
profile and presses ESC, first nothing happens, then an obscure
message appears.
The reason is that ESC "shortcuts" are introduced in two places.
To fix this, remove the ESC shortcut in the profile (the planner
widget cancels the plan anyway) and replace all the shortcuts in
the profile with a simple override of the keyPressEvent().
The latter is not strictly necessary, but hopefully avoids further
complications with multiple shortcuts. And the code is easier
to follow too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
User report: when switching focus between windows, the
cursor position gets lost. This is due to a note-edit
command being fired, which then overwrites the notes tab.
To prevent this, don't update the notes field when placing
a command. Moreover, generally don't update the dive
selection when placing a command as that also rewrites all
the values.
Should this be extended to other fields?
Fixes#3365
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the file system of the Zurich gets full, the only way to continue to
download from it, is to disconnect and reconnect the dive computer (which
resets the FAT file system that it emulates to 'empty').
This solution is rather hacky and weird because it does a hard count down in a
busy loop, but given the narrow use case, this may be acceptable.
This also adds support for the UEMIS_DIVE_OFFSET environment variable that
allows the user to skip dives on the device.
[refactored by Dirk Hohndel]
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was a user request: Sort bar charts by height of the bars.
Obviously, this can only work for categorical charts, not for
histograms.
The UI is a break from the old concept: the sorting is chosen
based on the chart, whereas for the rest of the features, the
viable charts are presented based on the binning, etc.
I found it confusing to have the possible charts be selected
based on sorting. I.e. if a non-bin sort mode is selected,
the histogram charts disappear. On the flip side, this would
be more consistent. We can change it later.
For value-based bar charts, there are three sort modes: by
bin, by count (i.e. number of dives in that bar) and by
value (i.e. length of the bar). This hopefully satisfies all
needs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo commands for depth and duration editing cleared
the samples of the dive computer. They relied on the profile
automatically creating a fake profile. However, at some point
that code got removed. Therefore, do it explicitly in the undo
command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CCRs are different. It does not make sense to compute
a depth dependent SAC. You could compute the rate of O2
consumption but even that is likely wrong (as O2 in the
diluent would enter that as well), so simply don't attempt
it.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Air is a special gas that does not contain oxygen according
to gasmix.o2.fraction. If you want to use the fo2, you
need to use get_o2() to treat this special case correctly.
This fixes a bug when setting the MND of a gas containing
21% oxygen when o2 is considered not narcotic.
Reported-by: Christoph Gruen <gruen.christoph@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
For dives with mixed divemode, one needs to check sample.setpoint
to figure out if the segment is an OC segment and the po2 needs
to be computed from the gasmix and ambient pressure.
This fixes#3310
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We already showed the tags, but we didn't allow the user to edit them.
This tries hard not to create inconsistent or illogical tags by trimming
white space and being careful with how the tags are added.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the last displayed dive had events, those DiveEventItems had slots connected
that would update those icons if things changed. When closing the dive log and
switching to a different one, those slots were still called and would then access
freed memory (the event structure from that old dive that is long gone by then).
This code explicitly deletes those DiveEventItems which also removes those signal
slot connections.
Fixes#3305
Sugested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we download a first dive computer and add a dive site to the dive (by
setting a location name for example), and then download from another
dive computer that provides us with GPS data, we should keep the
existing dive site information, but add the GPS data from the freshly
downloaded dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The changes in commit 4daf687876 ("profile: remove [disable|enable]Shortcuts()
signals") resulted in us no longer enabling the shortcuts on the desktop (at
least on macOS where I debugged this). This placement of the call feels like a
bit of overkill, but at least it shouldn't be wrong.
Fixes#3293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveEventItem had an internal copy of the event. It passed
that copy to the undo-machinery, which of course didn't work.
Simply keep a pointer to the event. All changes to a dive no
pass via the undo-machinery, which causes a reload of the profile,
so this should be safe.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
the last manually entered waypoint but consider the
possibility that it should first top where we are
before the next stop depth has cleared.
Reported-by: David Carron
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The TeX exports may hang the UI for a long time.
Show a progress-dialog that is updated after every exported dive
and allows the user to cancel the export.
This is pretty lame, because it is synchronous (export still runs
in UI thread) and therefore the UI still is sluggish. But it
is an improvement.
Since the TeX-exporting code is in a shared directory (desktop and
mobile), this uses a slim interface class. Mobile does not
yet use TeX export, but you never know. Better than #ifdefs
sprinkled all around, I reckon.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The font-size in printed profiles is based on the size of the profile
in the main window. This makes no sense. Why should changing the
window size change the font-size on printouts?
Matter of fact, when making shrinking the height of the window to
its minimum, comical printouts are obtained (font way too big).
Therefore use an arbitrary rule: Say that profiles 600 pixels high
look reasonable and then scale up to the actual size on the printout.
This may need some tweaking for high-DPI mode. But that seems not
to be supported on desktop anyway?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Both the calculations for CNS and OTU did not take
into account the pO2 drop when using a PSCR. Furthermore,
there was some unit confusion due to not using internal
units.
Reported-by: arosl
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This feels much more responsive to various screen widths to me.
Instead of a fixed grid this is now a Flow that is tries to make much
better use of the space available on the user's device. It's not always
perfect, but to me at least a massive improvement.
The commit is almost unreadable because of the re-indentation and the
move of a block of fields to earlier in the form (as that made it much
easier to flow everything). But with show -w you can get a better idea.
We have a Flow around all the fields, we pair each label with the
corresponding input field, and then have a few additional Flows to
ensure that the cylinders always start in the first column.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds fields to the advanced preferences page to modify GFLow and GFHigh for
the Buhlmann decompression model for calculating ceilings. Updated preferences
code to set the Buhlmann parameters in core/deco.c when the GF prefs are
updated.
Signed-off-by: Doug Junkins <douglas.junkins@gmail.com>
First, the time zone adjustment was wrong - this as written could only
ever have worked in UTC or by pure chance.
Second, the order of alerting the UI of the availability of a GPS fix
was also incorrect creating a race between the UI and our data
structures.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When setting a CCR setpoint, the profile code(!) would turn
the dive into a CCR dive. Not only should the display layer
not alter dives, this also means that the action is not
undoable.
Move that to the appropriate undo command, where it makes
more sense, but obviously also makes things more complicated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The AddWeight, RemoveWeight, EditWeight and ReplanDive
commands were missing invalidate_dive_cache() calls.
Add them to ensure that the dives are written to git
logs on save.
Fixes#3150
Reported-by: Peter Zaal <peter.zaal@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This also includes the already merged statistics for mobile.
All of this still needs to be added to the user manual.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
