We can argue about any of the changes here, but they are the result of our
whitespace.pl script - so if any of this is offensive to you, part of the
resolution will be fixing the script...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
userid was saved outside all groups, even though it belongs to cloudStorage
Add code to save in new location and read from new/old location
Signed-off-by: Jan Iversen <jani@apache.org>
remove DiveComputer from SettingsObjectWrapper and reference qPrefDiveComputer
update files using SettingsObjectWrapper/DiveComputer to use qPrefDiveComputer
this activated qPrefDiveComputer and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Expand SET_, DISK_ and HANDLE_ macros with field for substructure
Structure prefs contains e.g. prefs.dive_computer.vendor an extra field
are added to the macros to allow this.
Signed-off-by: Jan Iversen <jani@apache.org>
expend LOADSYNC* into DISK_* macros
remove LOADSYNC* from qPrefPrivate.h
update qPrefDisplay to not use LOADSYNC*
Signed-off-by: Jan Iversen <jani@apache.org>
Add static and inline to getter in all qPref header files
Remove call to GET_PREFERENCE_* in qPrefDisplay.cpp
Remove GET_PREFERENCE_* from qPrefPrivate.h
static inline is slightly faster than a function call, but it saves
a lot of coding lines (no lines in qPref*.cpp). Getters are a direct
reference to struct preferences, so they will normally only be used
from QML.
Signed-off-by: Jan Iversen <jani@apache.org>
Add static and inline to getter in all qPref header files
Remove call to GET_PREFERENCE_* in qPrefDisplay.cpp
static inline is slightly faster than a function call, but it saves
a lot of coding lines (no lines in qPref*.cpp). Getters are a direct
reference to struct preferences, so they will normally only be used
from QML.
Signed-off-by: Jan Iversen <jani@apache.org>
Add copy_txt function to qPrefPrivate class
Remove macro COPY_TXT from qPrefPrivate.h
Replace use of COPY_TXT with copy_txt in qPref classes
copy_txt is only once, COPY_TXT was expanded approx. 160 times, so
this commit saves space (and removes a macro).
Signed-off-by: Jan Iversen <jani@apache.org>
Paint a rectangle on top of thumbnails indicating the run-time
of the video.
Use the z=100.0-101.0 range for painting the thumbnails, whereby
the z-value increases uniformly from first to last thumbnail
(sorted by timestamp). The duration-bars are placed at z-values
midway between those of the thumbnails.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Video thumbnails are more complex than simple picture thumbnails.
We store a duration and might want to store multiple images.
Therefore, refactor the thumbnailing in imagedownloader.cpp. Move
the thumbnail-writing down in the call chain to where the thumbnails
are created, since we have more information there (i.e. whether we
could parse the file but not extract an image, etc.).
Split the write-to-cache function into three versions:
- pictures
- videos
- unknown
Define the video-thumbnail on-disk format as
- uint32 MEDIATYPE_VIDEO
- uint32 duration of video in seconds
- uint32 number of pictures
for each picture:
- uint32 offset in msec from begining of video
- QImage frame
Currently, we write 0 pictures. This will be filled in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Each DiveItem (which is a wrapper around diveId with some virtual
functions), had a member icon_names, which is an array of
four QStrings. These were not used anywhere and must be an obscure
oversight and was probably planned as a static cons array?.
In any case, remove it.
There *was* a function-local analogous icon_names array in
DiveItem::data() though. This array would initialize four
QStrings from C-string literals on every invocation. Make
this array static, local to the translation unit and use
the QStringLiteral macro to construct the QString object at
compile-time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove CloudStorage from SettingsObjectWrapper and reference qPrefCloudStorage
update files using SettingsObjectWrapper/CloudStorage to use qPrefCloudStorage
this activated qPrefCloudStorage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name> (from struct preferences>)
- signal function have <name>_changed (from struct preferences>)
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way SettingsObjectWrapper
handles it) secures the same storage name is used. Having the set/get/load/sync
functions grouped together makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
There were numerous inlined functions in dive.h. For many of them
inlining is dubious. Let's uninline most of them, with the exception
of trivial accessors and interpolate().
On current master, this gave a size reduction of 5 pages:
-rwxrwxr-x 1 bs bs 5863656 Jul 18 20:57 subsurface-inline
-rwxrwxr-x 1 bs bs 5843176 Jul 18 20:48 subsurface-noinline
-----------------------------------------------------------
20480
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a context-menu entry to TabDivePhotos which opens the folder(s)
of all selected files.
Fixes#1514.
Suggested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the last dive of a trip is removed, the trip is deleted.
On redo the dive is added to a non existing trip, leading to a
segfault.
Therefore, keep a copy of the trip to reinstate it on redo.
Note: this cannot work for a sequence of multiple commands.
One would have to rewrite the whole undo-history. Nevertheless,
let's do this as a stop-gap measure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
UndoDeleteDive::tripList kept track of the trips to be recreated on
undo. But the list wasn't cleared on undo, thus on subsequent redo
the same trip was readded to the list, leading to double-free.
This could trivially be reproduced by repeated CTRL-Z, CTRL-SHIFT-Z
pairs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove include of QtTest in header, becaue it is not needed,
add include of QObject in header, so moc can generate code.
add QTest in cpp file, which replaces QtTest
Signed-off-by: Jan Iversen <jani@apache.org>
remove include of QtTest in header, becaue it is not needed,
add include of QObject in header, so moc can generate code.
add QTest in cpp file, which replaces QtTest
Change content of strings to test divelist_font to a not normal
font name, to ensure less confusion by readers. Remark the old
surrounding code accept illegal font names, but correcting this
is not covered in this commit.
Signed-off-by: Jan Iversen <jani@apache.org>
Add qPrefPrivate class which contains one QSettings variable,
delete QSettings from qPref* class definitions
this secures there are only instance of QSettings
(QSettings needs to be in a QObject class to work)
Signed-off-by: Jan Iversen <jani@apache.org>
remove QSettings header file from qPref.h (which is included in many files)
to isolate the use of QSettings in the total system.
Signed-off-by: Jan Iversen <jani@apache.org>
Files are listed in 2 places in CMakeLists.txt, update file to
secure qPrefAnimations and qPrefDisplay are listed correctly
Signed-off-by: Jan Iversen <jani@apache.org>
9efb56e2d4 introduced rather complex
logic for picture drag'n'drop events onto the profile. Among other
things, the code had to check whether the picture actually belongs
to the displayed dive.
This can be simplified by transporting the dive-id in the drag'n'drop
event structure. The flow goes like this:
DivePictureModel--(1)-->DivePictureWidget--(2)-->ProfileWidget
For (1), we can use the Qt::UserRole role. This was used to transport
the picture-offset, but this is not needed anymore since ProfileWidget
was decoupled from DivePictureModel.
For (2), we simply replace the "position" value, which was never used.
Why would the receiver care which pixel was pressed in the media-tab?
This commit also contains a minor cleanup in DivePictureWidget:
QListView::mousePressEvent(event) was called in both branches of an
if and can therefore be removed from the if. This is so trivial,
that it doesn't warrant its own commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The index-field was misused by the IO routines to mark which dives
had been saved. Somewhat questionable, but let's at least name the
field accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
find_trip_by_idx() and find_matching_trip() weren't used anywhere.
The trip index actually is only misused as a "trip saved"-flag.
trip_has_selected_dives() only existed as a comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the remoteDeviceScanFinished slot, the old code called into
the deviceDiscoveryError() in case the device discovery agent
had the error flag set. This is not necessary, since the agent
will send an error signal in such a case.
For Qt's device discovery agent, the whole check-for-error is
unnecessary, as the documentation states:
"The signal is not going to be emitted if the device discovery
finishes with an error."
But for the homebrew WinBluetoothDeviceDiscoveryAgent, which
derives from QThread, both an error() *and* a finished()
signal will be sent. Therefore keep the test, but don't call
into the slot twice.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A number of small cleanups to the color-table:
1) Make the profile_color map of static linkage - it is not
used outside of this file.
2) Remove the third color, which originally was planned for
printing. It was not accessed anywhere.
3) Replace QVector<QColor> by std::array<QColor, 2>. Using a
reference-counted, copy-on-write, dynamic container for static
data seems like overkill. std::array<QColor, 2> has exactly the
same run-time impact as QColor[2], but allows for assignment.
4) Use brace-initialization and remove the unneeded COLOR macro.
5) Remove the fill_profile_color function. Simply use static
initialization.
6) Move #includes from .h to .cpp file.
7) Remove text_render_options(_t), which were not used anywhere.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive_getUniqID() is used to create unique dive ids, which are
stable during application lifetime. It was passed a dive, checked
that the id was not set (if it was that it is know to the application)
and set a new id (in contradiction to its name!) if it hadn't any.
There were three callers:
alloc_dive(): called the function on a zeroed dive struct.
fixup_dive(): called the function only if the dive had a 0 id.
MainWindow::setupForAddAndPlan(): called the function on a zeroed dive
struct.
Thus, in all three callers the id is guaranteed to be zero and
the whole keeping-track-of-ids logic is moot. Remove the logic,
don't pass a dive struct to dive_getUniqID() and move the function
to the C-backend.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
9efb56e2d4 added code to rearrange
pictures on drag'n'drop. To keep the correct repainting order (i.e.
later thumbnails are painted on top of previous thumbnails), the
z-value was set accordingly. In principle a sound idea, but it did
not work out, because on hoverEnter and hoverExit events, the z-values
were modified, thus restoring the wrong drawing order.
Instead, use the QGraphicsItem::packBefore() function. Experimentation
showed that this only works if stacking is done from the back
of the list.
Silence an erroneous compiler warning by initializing a variable to 0.0.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On top of the file filter for all media files add a file filter
for images only, one for videos only and one for all files.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
