(planning is excluded, due to not finished UI).
Connect all spinboxes with plannerShared.
This change allows live testing and compare with the desktop version.
Signed-off-by: Jan Iversen <jan@casacondor.com>
(planning is excluded, due to not finished UI).
Connect all checkboxes with plannerShared.
This change allows live testing and compare with the desktop version.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The getter returns alwayes in m/1000, making the calculations
identical, independent if the system is in Metric or Imperial units.
Correct getter test cases.
Signed-off-by: Jan Iversen <jan@casacondor.com>
When unit system Imperial is properly activated, these test cases
have wrong values, and thus fail.
Use correct values.
Signed-off-by: Jan Iversen <jan@casacondor.com>
reactivate deco2 test case, after problem is solved in plannerShared.
Also add a commit on bottompo2/decopo2 in imperial mode, that do not
use PSI as expected.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The default behavior of parse_file() is different between a desktop build
and a mobile build. This makes parse_file() always assume that it's ok to
connect to the cloud.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
PSI is not implemented for diveplanner
Bestmixend in feet is not implemented for diveplanner
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 5.13 (and maybe 5.12) introduced new macros for QUICK_TEST_MAIN_WITH_SETUP
and as testQML is loosely based on this macro it needs to be redesigned.
Before Qt 5.11 it was not possible to do QML testing that depended on
classes being registred with the macro QUICK_TEST_MAIN_WITH_SETUP,
therefore it was nessecary to make an independent implementation of
main().
For now, let the main do a "return 0", to keep the test in the loop.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Font size are never stored on disk for the mobile version,
so testing load/save does not make sense.
add #ifndef SUBSURFACE_MOBILE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were several issues with these tests, including checking
the value argument against bool values even if the underlying
preference isn't bool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switch oldStatus from qmlprefs to qmlmanager
This is the last use of QMLPrefs, which can later be safely removed.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
oldStatus() is kept in qmlPrefs during the login process to allow
for a couple of special cases:
- if a user have added dives in NO_CLOUD mode and changes to use the
cloud these dives are copied to the Cloud, instead of being lost.
- if a user does a bailout from the login process (this should not
happen anymore) the old status is restored.
The pure solution would be to have oldStatus at the top level (e.g.
a property in qml) and only change it when actually being in the
login process, however due to way the qmlmanager is written it proved
very difficult and not worth the effort.
In order to be able to remove qmlPrefs, oldStatus are moved to
qmlManager.
This commit only contain the creation of the variable and the supporting
code.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs.showpin is the same as
PrefCloudStorage.cloud_verification_status === CloudStatus.CS_NEED_TO_VERIFY
but is actually implemented as a separate variable.
Removing showPin in order to limit use of QMLPrefs, which is the overall goal.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove no longer used function setCredentialStatus() from qmlprefs.
This is done to secure there are no missing setCredentialStatus calls
in the code.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
call setOldStatus() and set_filename().
saveCredentials() will adjust email and password.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This setCredentialStatus() will never do anything, because qPrefCloudStorage
is identical to prefs.cloud_verification_status, and can thus be
safely removed.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Revert to the divelist by setting oldStatus() directly to
set_cloud_verification_status()
This is done to further limit the use of setCredentialStatus() and
prepare to remove qmlPrefs.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update revertToNoCloudIfNeeded() to not use setCredentialStatus() by adding an
extra call to setOldStatus()
setOldStatus() is called in setCredentialStatus together with
set_cloud_verification_status() therefore these 2 calls need to added when
removing setCredentialStatus().
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qmlprefs::setCredentialStatus() basically only does something when called with
CS_NOCLOUD.
A number of setCredentialStatus() calls happen where status cannot be
CS_NOCLOUD, and therefore setCredentialStatus() can be safely replaced with
set_cloud_verification_status()
This limits the use of qmlprefs::setCredentialStatus(), but there are still a
couple of more complicated calls.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace all credentialStatus() with cloud_verification_status()
Where both prefs.credentialStatus and
PrefCloudStorage.cloud_verification_status are being set, remove
prefs.credentialStatus.
These replacements are valid since credentialStatus() is a simple
envelope over cloud_verification_status().
Also remove qmlPrefs::credentialStatus() from qmlPrefs (mostly to ensure no
replacements was forgotten).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove m_credentialStatus in qmlpref, but let the setter/getter
stay, using qPrefCloudStorage::cloud_verification_status()
instead.
This change ensures that qmlPrefs:credentialStatus() returns the
same as qPrefCloudStorage::cloud_verification_status(), and the
setter/getter of credentialStatus can later be removed safely.
This is a "checkpoint" to ensure everything works without a temporary
credentialStatus. No code part depend on the difference between
qmlPrefs::credentialStatus() and
qPrefCloudStorage::cloud_verification_status(), but the code reference
both.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove use of prefs. (apart from instanciating the object) in
main.qml
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the divelist is only visible if online/offline (CS_VERIFIED/CS_NOCLOUD),
there is no need to check that to enable "Add dive manually".
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Manual sync was enabled both for CS_VERIFIED (online) and CS_NOCLOUD (offline)
and then in the trigger CS_NOCLOUD lead to a login screen, potentially
confusing the user.
Only enable manual sync with verified cloud credentials.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs. is only important during the signin process, so use the standard
PrefCloudStorage variable
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin does only have the values "" and NULL, so replace cloudPin()
with "" in csa->backend() call
remove setting of cloudPin to ""
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin is only set to "" and NULL, therefore and "if" checking if
cloudPin is not empty will never have affect.
Remove else part.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move verifyCredentials() from public slots to private, eliminating
the need to MOC and making the C++/QML interface on function less
complicated.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add pin parameter to saveCredentials() thereby having all info about
credentials in one function call.
Add "" as pin in saveCredentials() - main.qml, when verifying
credentials.
replace verifyCredentials() with saveCredentials() in the register
button on the pin page.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clearCredentials() was only called from one place (in the same file), copy
functionality and remove function.
It was declared as a public slot, so this saves a little bit of overhead too.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cancelCredentialsPinSetup() is no longer used, so remove it.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Copy functionality from cancelCredentialsPinSetup() into Cancel in
CloudCredentials.qml, this is part of the general qmlprefs cleanup.
Remove rootItem.returnTopPage() since the user stays on this page
(sees credentials again).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now just copy the functionality into Settings.qml, this is part
of the qmlprefs cleanup.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
