In order to replace DivelogsDeWebServices::prepare_dives_for_divelogs with
uploadDiveLogsDE::prepareDives, first step is to make the functions identical.
amount_selected is not maintained for mobile, add #ifdef SUBSURFACE_MOBILE
Add comment, to make code more readable
add white line to make code more readable
change to use variable ds (created a couple of lines earlier
Avoid "goto" by adding close code
Remove label and close code (it was only called in 1 place)
Signed-off-by: Jan Iversen <jan@casacondor.com>
use report_error directly, instead of making a QString first,
argument syntax are different (%s vs. %1)
Signed-off-by: Jan Iversen <jan@casacondor.com>
The implementation is based on class DivelogsDeWebServices in
desktop-widgets but without the UI entanglement
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add divelogsde_userid and divelogsde_password to
qPrefCloudStorage to be used in Export.qml
Extending qPrefCloudStorage is more logical than adding QSettings
(and securing the same behaviour) outside qPref.
Signed-off-by: Jan Iversen <jan@casacondor.com>
diveshareexport wants to show the HTML received
in a positive response, so signal cannot be
compatible with diveLogsDE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add DiveShareExportDialog::do_upload() to
uploadDiveShare::do_upload(), while cleaning it from
UI.
Add signal connections as used in uploadDiveLogsDE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add diveshare/uid and diveshare/private to qPrefCloudStorage
to be used in Export.qml as well as diveshareexportdialog
Extending qPrefCloudStorage is more logical than adding QSettings
(and securing the same behaviour) outside qPref.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is the framework that mobileExecutable needs, all
prepared to move functionality from desktop-widgets
(current implementation) into a shared version.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The old code called directly into the DiveListModel. Instead,
send a signal and hook into the signal from the model. This
will allow us to remove the DiveListModel::instance() function.
This, in turn, is a step towards supporting multiple models
at the same time. However, currently the model manually
sets the hidden_by_filter flag in the core and therefore
only one active model is supported at a time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, selecting a single dive or deselecting all dives was
quite awkward: One had to pass in a single-dive vector and the
dive itself (as current dive). Provide a convenience function
that selects a single dive or deselects all dives if null is
passed in.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Q_PROPERTY contains an internal ";", making clang produce a warning
when ending the line with a ;
Remove ; at the end of Q_PROPERTY lines.
Signed-off-by: Jan Iversen <jani@apache.org>
Currently, the caller is responsible for not reusing a freed
weightsystem / cylinder or resetting the description field to
null. This is very unfriendly. Set the description field to null,
because that allows us to call free_* repeatedly on the same
object. Use the new behavior to make the weightsystem model code
a bit cleaner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the EditWeight undo command. Since there is common code
(storage of the old weight), this creates a common base class for
RemoveWeight and EditWeight. The model calls directly into the undo
command, which is somewhat unfortunate as it feels like a layering
violation. It's the easy thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of freeing internal data of the weightsystem structure,
call the free_weightsystem function (which has to be made extern
at first). This makes things more future-proof, should the
weightsystem struct ever be extended.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make things more future-proof, introduce an empty_weightsystem
constant. Replace explicit aggragate initialization of empty
weightsystems by this constant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more complicated than weight adding, because the
multiple-dive case is not well defined. If multiple dives are selected,
this implementation will search for weights that are identical to the
weight deleted in the currently shown dive. The position of the weight
in the list is ignored.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce an AddWeight undo command. This is modelled after the
numerous dive-edit undo commands. The redo and undo actions are
connected to the WeightModel via two new signals, weightAdded
and weightRemoved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveFilter is not available in Mobile, so another solution
is needed.
Use "for_each_dive_site" to loop over dive sites instead.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The DiveListView has a function to select the first dive. Move
this to the core to be able to call it from all parts (not only
desktop) of the code.
Currently, this has a (small?) UI regression: when filtering dives
and no selected dive is visible anymore, the old code would select
the first dive in the list. The new code selects the newest dive,
which might not be the first if some sort-criterion is active.
To revert to the old behavior, it will be necessary to move the
sorting function likewise to the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The file command_private.cpp had functions concerning selections
only. To make these functions accessible from outside the undo
machinery, turn it into a part of the core-library. Currently,
only C++ functions are exported. We might think about also
exporting a C interface.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
desktop-widgets/divelogexportdialog.* contains both the desktop
dialog as well as the "real" export functions.
Create a class to be shared between desktop and mobile
Copy the export functions 1-1 from divelogexportdialog.* of course
changing class names.
saveProfile is highly dependent on the UI, so the implementaion will
be done in each UI directory (desktop-widgets, mobile-widgets).
Remark this commit just add the copied functions, in order to secure
nothing is broken.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add the export of environmental parameters in star widgets to .html format. The
dive rating is always shown both in the condensed as well as in the expanded
view. The other five environmental variables are only shown in the expanded
view. Only those star widgets with a rating are shown: if a star widget has not
been rated in the UI, then it is assumed unrated and is not indicated in the
expanded view.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Provide file I/O for those star widgets that are enabled. The values of the
widgets can be stored to and read from either xml or git.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connect the UI to the underlying dive structure. Enable proper initialisation
and management of star widgets while Information tab is active. Enable undo for
the addtional star widgets.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a preference setting on the General Settings page. The setting is saved
with the other preferences.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As per request from users on scubaforum.com, this adds
the current gradient factor to the deco information of
the infobox. Up to now, this information was only
graphically represented in the pressure bar graph
and the heatmap. This gives a numerical value.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add flag to subsurface_mobile (only when compiling for desktop)
to allow using qml files from disk instead of resources.
This allows testing qml changes with just restarting subsurface_mobile.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The code seemed to do something really reasonable by picking one of the
supported OSTC versions - except that the one it picked didn't support
BT/BLE and therefore our logic of recognizing dive computers on iOS
failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I was reminded to do this when a user in French speaking Switzerland reasonably
suggested that fr_FR would be a much better fallback than en_US in their
situation.
Fixes: #2388
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way this was accessed via Qt's model semantics was horrible.
This gives arguably more readable code, since we don't have to
shoehorn things through QVariants.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split out the actual filtering from the MultiFilterSortModel.
Create a DiveFilter class that does the actual filtering.
Currently, mobile and desktop have their own version of this
class, though ultimately we may want to merge them.
The idea here is that the trip-model and undo-commands have
direct access to the filter-function and thus can take care
of keeping track of the number of shown dives, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter-model was catching dives-added / dives-deleted signals
from the models to keep track of the number of shown dives.
To simplify the data flow, do this directly in the undo-command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We mark hidden/shown dives in the core but store the number
of shown dives in the MultiFilterSortModel. Move this datum
to the core for improved locality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
According to the man page, fopen and fclose return
the error number in the global variable errno.
Fixes CID 350115
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes another thing Coverty found. I am not 100% sure
I understand the semantics of cylinder_t.manually_added
but looking at other instance I guess true is the correct
value for a cylinder from a csv file for a Poseidon
rebreather.
Fixes CID 350734
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Coverty found that in the export functions, we initialize
the planner deco state with NULL and then possibly later
access its content. This makes sure, we don't do that.
Let's see if this makes Coverty happy or I missed somehting
else.
Fixes CID 350736
Fixes CID 350735
Signed-off-by: Robert C. Helling <helling@atdotde.de>
It makes no sense to have a non-NULL current_dive once all dives
have been deleted. Therefore, clear current_dive implicitly in
clear_dive_file_data() and don't depend on the caller performing
this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In get_gas_used() the use was left uninitialized if there are neither
user- nor computer-supplied values. This gives random SACs in the UI.
Initialize to 0.
Fixes#2376.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The determination of minimum pressure in calculate_max_limits_new()
in profile.c was wrong for a long time. Since the loop went over all
cylinders (even unused ones), the minimum pressure was always zero.
Since we loop only over used cylinders, the minimum pressure was
initialized to the lowest starting pressure of any cylinder.
If there were no events with pressure change, the minimum pressure
stayed unchanged, resulting in a funky scaling.
Instead, let's initialize the minimum pressure to the lowest ending
pressure.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When parsing of a timestamp failed (shouldn't happen) set the
timestamp to zero. This should give less unpredictable results
and silence a compiler warning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinderList() function collects all cylinder descriptions.
Instead of adding all cylinders, then sort, then removed duplicates,
keep a sorted list and only add non-existing elements. Find
existing elements by a binary search.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tab was crashing if there were no cylinders because
1) per_cylinder_mean_depth() would access non-existing cylinders.
2) TabDiveInformation::updateProfile() would access a non-existing
mean.
Fix both of these crash conditions by checking whether the dive
actually has cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In getFormattedWeight() and getFormattedCylinder(), the indexes
were passed as unsigned ints. This makes no sense as the only
callers were using signed ints. Change the parameters to signed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a convenience, return the cylinder from add_empty_cylinder()
to spare the caller from the nasty expression to fetch the
last cylinder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Most callers of this function accessed the newly generated cylinder
immediately after calling this function. Thus, for convenience,
return the added cylinder. This avoids a number of verbose expressions.
On the flip side, cylinder_start() now has to be cast to
function returning void in a the "nesting" function table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, future callers will not have to include the monster dive.h
include if they just want to copy cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the loop body of copy_cylinder_types() into its own function.
When using variable sized arrays, this loop will have to treat two
cases (overwrite cylinder and add new cylinder), so that makes things
more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
merge_cylinders() used three bitmaps to identify cylinders used in
the first and second dive and matched cylinders. Even though nobody
will use more than 32 (or 64!) cylinders, replace these with
dynamically allocated bool-arrays for consistency with the rest
of the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calculating per-cylinder mean depths, bitfields were used to
keep track of "used" and "known" cylinders. Even though no sane
person will use more than 32 cylinders, turn this into dynamically
allocated arrays of bool for consistency with the rest of the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To calculate sac rates, an array of used gases for every point on the
profile was used. This was implemented using unsigned int bitfields.
While nobody sane will ever use 32 or even 64 cylinders, for consistency
with the rest of the code, also change this to use dynamically
allocated arrays.
But allocate only once per shown profile, not once per sample.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All accesses to the pressure data were converted to use functions.
Therefore it is now rather trivial to dynamically allocate the
pressure array and just change the functions.
The only thing to take care of is the idiosyncratic memory
management. Make sure to free and copy the buffer in the
appropriate places.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The save_profiles_buffer() function was accessing the pressure
data directly. Instead, use the already existing funcions to
make transition to dynamically allocated pressure data more
seamless.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The pressure data was directly accessed in fill_missing_tank_pressures().
Use the already existing functions so that the structures can be adapted
easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only apparent reason that this was a macro is that it automatically
increased the "index" and "entry" counts. But incrementing these explicitly
seems reasonable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Continue with replacing pointers to struct plot_data entries
by indexes. Thus the pressure data can be kept in its own
array and can by dynamically sized.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The goal here is to make it possible to detach the pressure related
data from the plot_info structure. Thus, the pressure related data
can be allocated independently depending on the number of cylinders
per dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dynamically allocate cylinder arrays in C code. This is a tiny
step in removing the MAX_CYLINDERS limitation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_gas_used() returns the volume of used gases. Currently,
an array with MAX_CYLINDERS is passed in. If we want to make the
number of cylinders dynamic, the function must use an arbitrarilly
sized array.
Therefore, return a dynamically allocated array and free it
in the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Memory is cheap these days. Still, this was wasteful. On a 64 bit machine we
went from 1620 to 1592 bytes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When displaying segment or stop times in the planner notes, we always
round to the next full minute. This can mean for example that we
round down more often than rounding up with the result that the sum
of the segment times does not match the total runtime and can for example
lead to stops that are shown with 0min duration.
With this patch, we increase the reference time of the last display only
by the duration time actually shown. This way, the rounding errors don't
accumulate but having rounded down previously makes rounding up the next
time more propable.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When computing the best mix for a target depth, for helium, one
can either require that the partial pressure of N2 is the same
as at the target depth or the partial pressure of N2 plus O2.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We should call this function with two well defined dive_or_trip structures
which means that exactly one of the two values is set in each argument. But
in order to not have bugs elsewhere leed to crashes here, be more tolerant
of malformed argumnts.
Fixes CID 350100
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should never happen based on the logic in the callers, but just
to be on the safe side.
Should fix CID 350128
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The native buffer of a membuffer is not NUL-terminated, so when you want
to detach it and use it as a C string, you had to first do
'mb_cstring()' that adds the proper termination/
This was all documented in the header files, and all but two users did
it correctly.
But there were those two users, and the exported interface was
unnecessarily hard to use. We do want the "just detach the raw buffer"
internally in the membuffer code, but let's not make the exported
interface be that hard to use.
So this switches the exported interface to be 'detach_cstring()', which
does that 'mb_cstring()' for you, and avoids the possibility that you'd
use a non-terminated memory buffer as a C string.
The old 'detach_buffer()' is now purely the internal membuffer
implementation, and not used by others.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This seems excessively unlikely to actually fail. SEEK_END works, but SEEK_SET
fails? Oh well. Belts and suspenders.
Found by Coverity. Fixes CID 45039
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents a resource leak.
Found by Coverity. Fixes CID 350080
The commit also includes some tiny whitespace/empty line fixes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed one file fixing this earlier.
Since we never did anything with the error string, why even ask for it.
And this way we don't have to deal with the memory returned, either.
Found by Coverity. Fixes CID 350082
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we never did anything with the error string, why even ask for it.
And this way we don't have to deal with the memory returned, either.
Found by Coverity. Fixes CIDs 350124, 350113, 350106, 350099, 350091
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Even if there is a valid trip, we should not add a structure that isn't
a dive to it.
Found by Coverity. Fixes CID #350073
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Free resources allocated by alloc_dive() with free_dive().
Don't allocate and re-allocate a fixed two byte buffer on the heap.
Indirectly this fixes CID 216616
Suggested-by; Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this is debatably correct, free will happily accept (and ignore
the NULL pointer), so let's just always call it and make Coverity happy.
Fixes CID 45163
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The divesEdited signal sends the changed field as a parameter.
Since some undo-commands change multiple fields, this led to
numerous signals for a single command. This in turn would lead
to multiple profile-reloads and statistic recalculations.
Therefore, turn the enum into a bitfield. For simplicity,
provide a constructor that takes classical flags and turns
them into the bitfield. This is necessary because C-style
named initialization is only supported on C++20 onward!
Is this somewhat overengineered? Yes, maybe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo system sets updates individual dive fields on
redo respectively undo. Make salinity such a field, since
it is changed on replanning a dive.
To do this, break out the "update salinity" functionality
into its own function, add an entry to the DiveField enum
and add the corresponding switch-case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-computer freeing code was local to dive.c. Implementing
the replan undo-command will need that functionality. Therefore,
export it as a global function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At least in one of the logs we saw there seemed to be trailing spaces.
It should be enough for the BT name to start with "Mares Genius" in
order to be recognized.
Suggested-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have the "show all dive computers" logic on mobile, so we need
something like this.
Possibly we should use the libdivecomputer matching code if it exists,
but that's a much bigger change, let's do this incremental one for now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We'll use them from the model in order to avoid creating this many
DiveObjectHelpers when showing a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is disabled by default - but when compiled in it makes it a lot
easier to pinpoint why we are creating so many DiveObjectHelpers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old server certificates where not recognized on some older platform,
so we hardcoded the hex digest of the valid certificate and ignored the
error.
Those certificates have been replaced last week, so there is no point to
this hack anymore - also, we should always show the SSL error, not just
in verbose mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit df4fbf7699 ("Android: force different font on OnePlus devices")
inadvertantly added this hunk - let's undo it again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The test if we have to create gas switches wasn't yet aware
of the bailout option.
Reported-by: Dennis Arreborg <dennis@arreborg.eu>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The DiveImportedModel and DownloadThread used the same table
of dives and dive sites. This made it very hard to keep the
model consistent: Every modification of the download thread
would make the model inconsistent and could lead to memory
corruption owing to dangling pointers.
Therefore, keep a copy in the model. When updating the model,
use move-semantics, i.e. move the data and reset the tables
of the thread to zero elements.
Since the DiveImportedModel and the DownloadThread are very
tightly integrated, remove the accessor-functions of the
dive and dive-site tables. They fulfilled no purpose
whatsoever as they gave the same access-rights as a public
field.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though the returned dive is not const, the table is not
changed, as it only contains pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow efficient moving of downloaded dives from the download
thread to the model, implement a general move function that
moves table data. Instantiate that function for the dive and
dive_site tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way we handle singletons in QML, QML insists on allocating the
objects. This leads to a very idiosyncratic way of handling
singletons: The global instance pointer is set in the constructor.
Unify all these by implementing a "SillySingleton" template. All
of the weird singleton-classes can derive from this template and
don't have to bother with reimplementing the instance() function
with all the safety-checks, etc.
This serves firstly as documentation but also improves debugging
as we will now see wanted and unwanted creation and destruction
of these weird singletons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make it easier to pass around trips through QML, give each trip
a unique id. The id is generated in alloc_trip() and uses the same
function to generate unique dive ids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When exporting dive sites, the dive sites to be selected were collected
in the C-core. But that doesn't have access to the selected dive sites
if in dive site mode. Therefore, collect the dive sites in C++ and
pass down to the core. Use a std::vector to avoid memory management
woes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
is_dive_site_used() had a "selected" parameter. If true it would
return whether the given dive site had a selected dive. Turns
out all callers had this parameter set to true. Therefore, replace
by a simplified function without the "selected" parameter and
give the function an appropriate name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is working around a Qt Bug https://bugreports.qt.io/browse/QTBUG-69494
which prevents correct rendering of the OnePlus fonts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylindersObject list was only used by grantlee but not by
the mobile code. Since it is quite heavy, split it out and thus
don't generate it for every dive on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of handing a reference-to-dive to QML, prerender all the needed
properties and store them as values in DiveObjectHelper. Exception:
- date(): generated from timestamp
- time(): generated from timestamp
- cylinderList(): does not depend on dive anyway and should be made
static.
This hopefully avoids the random mobile crashes that we are seeing.
Clearly, this code needs to be optimized, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were temporary functions as long as DiveObjectHelpers were
used to access dives. All users now access the core directly and
therefore don't have to test DiveObjectHelpers for validity.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't provide access to the raw dive in DiveObjectHelper. All users
now access the core directly. This is a step in making DiveObjectHelper
value-based.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of keeping track of a list of DiveObjectHelpers, generate
them on-the-fly in DiveListModel. Thus, there is less danger of
model and core getting out of sync. On the flip-side, now the
DiveListModel and the DiveListSortModel might get out of sync.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveObjectHelper is a tiny wrapper around dive * to allow access
to dive data from QML and grantlee. It doesn't have to be a
full-fledged QObject with support for signals, etc. Therefore,
turn it into a Q_GADGET based object. This allows us passing the
object around as object, not as pointer to DiveObjectHelper.
This makes memory-management distinctly easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We don't want to generate a DiveObjectHelper numerous times for
every item in the dive list. Therefore, return this datum directly
from the model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The canonical way of displaying lists in Qt is via models.
Thus, return the tripId directly from the DiveListModel instead
of going indirectly via a DiveObjectHelper. In the future, this
will allow us to make the DiveObjectHelper value-based, as it
is not generated numerous times for every list item.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These properties are not needed anymore, because the full text search
was decoupled from the DiveObjectHelper.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The full text search was looping over the DiveListModel when
it could simply loop over the core model. Do that instead.
2) Don't generate a DiveObjectHelper to do a full text search.
Currently this is harmless as the DiveObjectHelper is only
a disguised "dive *". But from a conceptual point of view,
it represents the full representation of a dive and we don't
want to generate that in a tight loop.
This will help in
1) Making the DiveObjectHelper a non-reference object.
2) Moving fulltext search to the core and thus making it available
to desktop and more performant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the previous commit, we just continued downloading dives when
download errors happened, but that also makes problems a lot easier to
miss because now they are possibly just transient reports in the
progress bar that get overwritten by the next dive being downloaded.
So this turns a number of these errors from using 'dev_info()' to use a
new 'download_error()' reporting model, which then uses the generic
subsurface error reporting functionality that is sticky and can handle
multiple errors.
It also adds a few 'dev_info()' calls for actual informational messages
about the state of downloading, although the new ones will probably
mainly end up happening before the progress bar is actually shown. But
it might improve on some of the progress messages.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Charbonnier reported a problem downloading the dives from his
OSTC2, and Jef debugged the libdivecomputer log and says:
"Your ostc has 75 dives, but subsurface downloaded only one, and then
stopped the download. That's because that first dive appears to be
corrupt and fails to parse:
ERROR: Buffer overflow detected! [in /win/subsurface/libdivecomputer/src/hw_ostc_parser.c:981 (hw_ostc_parser_samples_foreach)]
Subsurface (incorrectly) considers that a fatal error and stops the
entire download. From a user point of view, it would be much better to
ignore the problematic dive, and continue downloading the remaining"
Subsurface used to just stop downloading if there were parsing errors,
but Jef further says:
"How parser errors are handled is up to the application. Aborting the
download is probably the worst option here. If a dive fails to parse
(because the dive data is corrupt, the parser contains a bug, etc),
that does not necessary mean the remaining dives can't be downloaded"
so let's change the logic to just continue downloading, and hope other
dives work better.
We might want to do better error reporting, right now the errors tend to
just cause "dev_info()" reports, which just set the progress bar text.
So you'll see it in the progress bar as it happens, but it won't get
really ever noted as an error, and it's easy to miss.
But that error reporting is a separate issue, and this just does the
"continue to the next dive" part.
Reported-by: Eric Charbonnier <eric.charbonnier69@gmail.com>
Suggested-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This balances the tags to a equal amount of start and end tags in the
planner notes html.
This also breaks it up with new-lines, so its a bit easier on the eyes,
and gives a validator the chance to point out on which line a error is.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
The output it spits out can be copy-pasted into a html validator like:
https://validator.w3.org/nu/#textarea
Signed-off-by: Anton Lundin <glance@acc.umu.se>
When gas switching only on stops is selected, the notes
showed an extra line at the not realized stop depth. This
eliminates it. It also makes sure there are no 0 second
spurious entries. And gas switching takes more than zero
time (otherwise we would have to print a line of zero
duration for at the gas switch depth).
Reported-by: tormento <turment@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
That was used to store the disclaimer of the last plan. The
functionality was disfunctional for a long time, therefore
remove the variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The setting of the disclaimer variable was removed inadvertently
some time ago, which removed the disclaimer from the printed plan.
Instead, introduce a function that returns the disclaimer with
the current deco mode. Use that function to generate the dive
notes and for printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There used to be code to remove the old planner notes when replanning
a dive. It used a global variable and seemed rather brittle. Moreover,
the place that set the global variable was inadvertently removed.
Therefore has been effectively dead code.
Reimplement the functionality, but be more robust by considering
that the deco-type may have changed: Split the translated disclaimer
string in two parts, before and after the "%s" place-holder.
Search for these two parts. Remove the disclaimer and everything
after the disclaimer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replaces some enums with names that do not clash with windows #defines.
Specifically:
ERROR -> ERRORED, PASCAL->PASCALS, IGNORE->IGNORED,FLOAT->FLOATVAL
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
The create_plot_info_new() function releases old plot data. This
can only work if the plot_info structure was initialized previously.
The ProfileWidget2 did that by a memset, but other parts of the code
did not.
Therefore, introduce a init_plot_info() function and call that when
generating a plot_info struct. Constructors would make this so much
easier - but since this is called from C, we can't use them.
Fixes#2251
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I got confirmation from Tiago Thedim Dias that my libdivecomputer patch
makes BLE downloading work from the i200c, and already pushed out the
libdivecomputer changes earlier. This updates the subproject in
subsurface to have those changes.
This also adds the bluetooth name patterns for the i300c and a few other
Aqualung dive computers we hadn't added yet. That should make them show
up in the bleutooth device list even without having to check the "Show
all bluetooth devices" check-box.
Tiago claims he didn't need that, and I wonder if we have some overly
permissive match somewhere, but it's the right thing to do regardless.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of generating cylinder data in the form of
CylinderObjectHelper objects for every DiveObjectHelper,
generate it only if needed. DiveObjectHelper is used extensively
in the mobile interface, which doesn't use the cylinder data.
Let's not generate unnecessary CylinderObjectHelpers in this
case!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CylinderObjectHelper is used for structured formatting of cylinder
values in grantlee types. Instead of keeping a reference to a
cylinder, turn it into a value type containing the formatted strings.
This should be distinctly safer, as we don't risk having stale
references flying around. Moreover, we don't have to use pointers
but can use containers containing plain CylinderObjectHelper. Thus,
no explicit memory management is needed, making the code distinctly
easier to understand.
Sadly, currently grantlee does not support Q_GADGET based Q_PROPERTY.
Therefore a GRANTLEE_*_LOOKUP block has to be added. This can be
removed in due course, as a patch to remedy this issue is in current
grantlee master.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We used a table lookup for CNS equivalent times. Turns
out the log of this table falls pretty much on a straight
line for po2 <= 1.5bar. We now fit this tabel two two
lines, one for <= 1.5 bar and one above. This four
parameter fit has half the sum of errors squared
than the five parameter fit using a fourth order
polynomial.
Fitting the log has the advantage that this never
crosses 0, which would have the bad effect of
resulting in negative CNS values as we divide
by the table value.
We don't adopt a maximum pO2 cut-off for the CNS calculation
but rather live with the large values that the interpolation
formula produces when extrapolating.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
It turns out that the dive site saving was subtly but horribly buggy.
To save the value of the dive site, it did
show_utf8_blanked(b, t->value, " value='", "'/>\n", 1, anonymize);
which looks sane on the face of it, but the problem is that it puts the
final closing xml marker in the 'append this at the end' case.
That means that if the value is empty, the value won't be saved, but
neither will the closing tag. Resulting in an xml line that looks like
this:
<geo cat='3' origin='0' <geo cat='5' origin='0' value='Other name'/>
where the first geo tag was saved without the ending marker.
That then makes all the xml nesting entirely wrong, and the whole file
fails to save.
Now, the code around it does check that 't->value' is not NULL, but it
doesn't check for a value that is empty or all spaces (which also will
make 'show_utf8()' just skip it.
Fix it by saving the end marker separately:
show_utf8_blanked(b, t->value, " value='", "'", 1, anonymize);
put_format(b, "/>\n");
so that the xml is valid even if the goe marker value wasn'r.
Reported-by: Bob Barker <barkerb1965@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It needs a newer version of libdivecomputer to actually download, but
early very experimental code exists in the Subsurface-NG branch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't support null-dives in DiveObjectHelper. Defaulting the
dive parameter to NULL seems to send the wrong message.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When removing the max-weightsystem restriction, the semantics of
the DiveObjectHelper::singleWeightSystem() function changed:
it now returned false for "no weightsystem". Change it back,
to 0 or 1 weightsystems, because the mobile frontend uses this
to check whether it can edit dive systems.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I'm not sure about this one, as we test name at the start of the
function and event->name shouldn't be NULL, but hey, we have the safe
compare function, so let's use it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Header files should compile regardless of order of inclusion.
Since libdivecomputer.h uses FILE unconditional include of
stdio.h is the correct thing to do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Enough gas was checking the currently displayed dive instead of the
dive to be planned. Not good in a multi-threaded context. Pass the
actual dive instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Pass the dive to be planned to track_ascent_gas and don't use
the displayed_dive. For convenience, pass the cylinder-id, since
the function can now access the cylinder of the dive by itself.
This makes the callers less verbose.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function comment talks about overwriting displayed_dive, when
in reality the function overwrites a passed in dive.
Also fix a debug-call which dumped the displayed_dive, not the
actual dive to stdout.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The fill_default_cylinder() function calculated the MOD based
on the currently displayed dive. This does not seem to make sense:
- When importing dives, why would we care about the altitude and
salinity of the currently displayed dive, possibly from a different
trip.
- The planner is supposed to be thread-safe and should not touch
global variables.
Of course this means that the importing-functions have to fill
out altitude and salinity before creating the default cylinder,
but this is their problem. For a freshly created dive they will
get the default values, which still seems less random than the
values from the displayed dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing the global displayed_dive to
calc_crushing_pressure(), use the dive the planner is working on.
A small step in making the planner thread-safe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parser had global state in the form of a linear regression
and the "plot_depth" variable. Collect that in the deco_state struct and
pass it down the call-chain. Move out the code to update the
regression data to not bother other callers of tissue_tolerance_calc().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
A number of architecture-dependent functions were declared in
dive.h. Move them to file.h so that not all file-manipulating
translation units have to include dive.h. This is a small step
in avoiding mass-recompilation on every change to dive.h
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace a macro calculating a degree-three polynomial by an
inline function.
Moreover, calculate the powers 1, 2 and 3 of the pressure inside
the function. The compiler will be smart enough to optimize this
to the same code. The only important thing is to write "x*x*x*coeff"
instead of "coeff*x*x*x". The compiler can't optimize the latter
because ... wonderful floating point semantics.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The planner can produce negative cylinder pressures when
more gas is used than available. Let's color the pressure
graph in a highly visible color to alert the user of the
fact that current gas planning is insufficient.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The curve fitting for our gas compressibility was only done in the sane
range of 0-500 bar, which is what a scuba cylinder can reasonably be
expected to perhaps have.
But the planner ends up happily using negative cylinder pressures when
you run out of gas, and then the compressibility gives nonsensical
results.
That's clearly a planner bug, but the nonsensical gas compressibility
values made it harder to see what could be wrong.
So we just clamp the inpot range to the range we have verified against
experimental data. If you try to get compressibility for negative
pressures, you get the compressibility for an ideal and imaginary gas.
And if you try to get compressibility for pressures over 500 bar, we'll
just assume that it's 500 bar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For better encapsulation, use clear_git_id() in clear_dive_file_data()
instead of setting saved_git_id directly.
Thus, memory management of the saved_git_id value is encapsulated
and can be modified more easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The git parser was using a number of global static variables. Remove
them by introducing a parser state, which is passed down to the
call hierarchy.
Advantages:
1) Removes global variables and makes the parser (mostly) reentrant.
2) More flexible - e.g. when parsing samples, the parser can now
access the dive to check if the cylinder number is valid.
3) Less weak typing through "void *".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function get_divemode() and git_tree_entry_blob() were not used
outside of load-git.c. Make them of static linkage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
copy_cylinders() copied the cylinders of one dive onto another dive
and then reset to the original gas values. Presumably, when copy and
pasting cylinders from one dive to another, only the types should
be copied, not the gases.
Moreover, the function could either copy all or only the used cylinders.
Firstly, the code was bogus: when restoring the pressures the indices
were mixed up: the old indices were used. Thus, when there where
uncopied cylinders, not all pressure values were restored.
Secondly, it is not clear that all callers actually want to restore
the pressure data. It rather appears the two (out of three) callers
actually just want to copy the cylinders.
Therefore, split the function in
1) copy_cylinders(): copy the cylinders with pressure data
2) copy_cylinder_types(): copy only the cylinder information
Since there is only one caller of copy_cylinder_types(), the "used_only"
argument can be removed. Since all cylinders are copied there is
no point in storing the pressure data. Don't overwrite it in
the first place.
The resulting two functions should be distinctly easier to understand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parsers / downloaders parse into a separate table and do
not directly change the divelist. Therefore, they shouldn't
call mark_divelist_changed().
Likewise split_dive_at() doesn't modify the dive list and
therefore shouldn't call this function.
Calling the function has the unwanted side-effect that undoing
the change will not clear the *-symbol in the title of the
main window.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was used to count the number of weightsystems
used in a dive. Since the weightsysems are now collected
in a dynamic table it became unused. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be used later when joining and editing dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sadly, this doesn't give any type safety. But at least it documents
the function arguments.
Make the last item in the enum as a number-of-pressure-entries
sentinel. Use that to size the pressure-values array.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of assigning the the lvalue of the SENSOR_PRESSURE
macro, introduce a general function to set pressure values.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The comment to populate_pressure_information() was mentioning
gas pressures that didn't exist. Remove these parts.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the INTERPOLATED_PRESSURE and SENSOR_PRESSURE macros by
inline functions. Generate a common inline function that reads
a pressure value for a dynamic sensor.
Not all SENSOR_PRESSURE macros can be replaced, because the
macro is also used to set the value and C sadly doesn't know
the concept of "return reference from a function".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is absolutely no reason to use a macro here.
The only argument that can be made is consistency with
the other pressure-macros, but those too are questionable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DILUENT_PRESSURE and INTERPOLATED_DILUENT_PRESSURE do not exist
anymore. No point in trying to output them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Another tiny step in making dive.h smaller: move function
declarations to deco.h if these functions are defined in deco.c
and don't directly concern dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The string_to_*() functions were declared in dive.h and qthelper.h.
Moreover in one file they were declared with C in the other with
C++ linkage. This only works because qthelper.h includes dive.h
first.
Fix this anomaly by declaring the functions only in qthelper.h,
but moving them from the C++ to the C part.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this function doesn't act on a dive and is only related
to cylinders, move it to equipment.c and equipment.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While testing the cylinder type saving fix, I noticed that the RBT
saving was broken. Instead of saving RBT whenever it changed, we'd save
it when it was non-zero. Which doesn't match the git save format, and
also doesn't match what we do when loading an xml file (where we default
to the previous RBT value, and a sample RBT will modify it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steve Williams reported a crash when saving a previously loaded dive as
xml, and gave a gdb backtrace.
It turns out that if we can't parse the cylinder use type (OC, diluent,
oxygen, unused) we initialize the cylinder use to an invalid type, and
then when we save it, we mess up.
Fix it up by doing proper limit checking before accessing the
"cylinderuse_text[]" array when saving.
Reported-by: Steve <stevewilliams@internode.on.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the error messages shown when failing to start ffmpeg, instruct
the user to set the correct executable in the preferences.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the git parser happily trashes memory if a git repository
contains too many weightsystems or cylinders. This should only happen
in testing, but nevertheless try to handle it gracefully and ignore
excess cylinders / weightsystems.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All callers of create_plot_info_new() called calculate_max_limits_new()
a line before. Thus, simply call the latter in the former.
This allows us to automatically free the plot data in create_plot_info_new().
The old code overwrote the corresponding field with NULL.
As a side-effect, this removes a bogus static variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a global variable last_pi_entry_new, which stored the
recently allocated plot data. This was freed when new plot data
was generated.
A very scary proposition: You can never have two plot datas at
the same time! But exactly that happens when you export for
example subtitles.
The only reason why this didn't lead to very crazy behavior
is that at least on my Linux machine, the calloc() call would
just return the previously freed memory.
Fix this mess by removing the global variable and freeing the
data in the callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Bailing out does not happen instantly. Rather wait for
the minimum stop switch duration before ascending.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In "core/save-html.h", the "core/dive.h" header was included in the
extern "C" block. This is invalid, because "core/dive.h" included
from C++ code contains Qt macros that expand to C++ templates. These
in turn must not have extern "C" linkage, since a plain C-linker
cannot handle such things.
The only reason this worked is that in all cases "core/save-html.h"
was included after "core/dive.h". The include of the latter in the
former had therefore not effect.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When checking for trip-overlap on import, only really overlapping trips
have been considered, i.e. when dives had overlapping times.
Instead use the TRIP_THRESHOLD so that on download dives are added to
the same trip if in a two-days time frame.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For historic reasons, there where three distinct signals concerning
dive-selection from the undo-machinery:
1) divesSelected: sent newly selected dives
2) currentDiveChanged: sent if the current dive changed
3) selectionChanged: sent at the end of a command if either the selection
or the current dive changed
Since now the undo-commands do a full reset of the selection, merge these
three signals into a single signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some commands tried to retain the current selection on undo/redo,
others set the selection to the modified dives.
The latter was introduced because it was easier in some cases, but
it is probably more user-friendly because the user gets feedback
on the change.
Therefore, unify to always select the affected dives on undo()/redo().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the default view is batched by trips, signals were sent trip-wise.
This seemed like a good idea at first, but when more and more parts used
these signals, it became a burden. Therefore push the batching to the
part of the code where it is needed: the trip view.
The divesAdded and divesDeleted are not yet converted, because these
are combined with trip addition/deletion. This should also be detangled,
but not now.
Since the dive-lists were sorted in the processByTrip function, the
dive-list model now does its own sorting. This will have to be
audited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In signals dives were sorted by date. This criterion is not be unique.
Therefore sort by the dive_less_than() function of the core to avoid
any inconsistencies between the Qt-models and the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The last direct user of the used parameter was removed in
16276faa45, the last actual user in
e2bbd0ceec.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was reimplementing functionality that was already there.
Simply call the already existing function.
Thus, we don't have to export the grow_dive_table function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cns_table was only used in divelist.c. Make it of static
linkage accordingly.
The cns_table_headers enum is likewise only used in divelist.c.
Therefore move it from the header to the .c file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function declarations of regressiona(), regressionb() and
reset_regression() were given in an independent translation unit.
Move them into the proper header file. To ensure consistent function
signatures is the whole point of header files, after all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The lookup tables decostoplevels_metric and decostoplevels_imperial
in planner.c were not used outside the translation unit. Make them
static.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
gaspressure.h had definitions of non-exported structs, but did
not declare the only function exported by gaspressure.c.
Therefore, move the struct definitions into gaspressure.c and
the declarations of the populate_pressure_information() function
from profile.c to gaspressures.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
But only functions that operate only on gases. Functions concerning
cylinders or dives remain in dive.c or are moved to equipment.c
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
gas_density() was declared extern in the header and defined inline
in the translation unit. I didn't even realize that this oxymoron
is valid. Remove inline and an Java-style function definition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is an equipment.c file, but no corresponding header. Move the
corresponding functions into a newly created header. This does not
improve compile time since, at least for now, equipment.h is included
in dive.h. But it makes things more consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The comment said "Clear everything but the first element" but
actually the macro freed the whole list including the first element.
For dive computers it was explicitly called on the second element.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make dive.h a bit slimmer. It's only a drop in the bucket - but at
least when modifying tag functions not the *whole* application is
rebuilt anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Headers should not have to be included in a certain order.
Therefore include stdarg.h and stdio.h in membuffer.h, since
the latter uses FILE and va_list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a function for copying tag-lists, use that instead of the
raw STRUCTURED_LIST_COPY macro-invocation. This will help in moving
tag functions into their own translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was probably used for debugging but has no callers anymore.
Let's remove it. If needed, it can be trivially readded.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a different field is edited, hide any old multi-dive-edit
warning message. The reason is that we might want to add an "undo"
button to the message. But this will undo the wrong command if
we don't hide the message.
Sadly, this means that we can't use animated show / hide, because
an animatedHide() followed immediately by an animatedShow() does
not necessarily show the message. In other words, and animatedShow()
does not interupt a started animatedHide()!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add display of the difference between pO2 in rebreather loop and the
equivalent OC pO2: this is the oxygen drop over the mouthpiece for
SCR dives. Obviously this is only displayed for SCR dives.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Note that we don't really have libdivecomputer support for it yet, only
newly added model numbers etc. But the name detection should make it
easier for people to at least download a memory dump.
In addition to the libdivecomputer model number updates, this also has a
merge of Jef's upstram libdivecomputer changes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, count_divecomputers only works on the current_dive.
Instead, let it take a pointer to an arbitrary dive. This is
in preparation for being smarter in the undo code concerning
which dive computer to show on deletion.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function clones a dive and clear out the old dive. This
corresponds to move semantics. Name the function accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of the elegant solution that just modifies the dive,
keep two copies and add either the old or the new copy. This
is primitive, but it trivially keeps the dives in the right order.
The order might change on renumbering the dive computers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When splitting out dive computers, the dives were sorted in
an arbitrary way (according to an internal id), since all
data are identical.
Therefore, consider the dive-computer model names when sorting
dives. Equal dives are now sorted alphabetically by model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The units.h file has two functions to convert atm pressure to mbar
and also to convert mbar to atm pressure. Implement these two
functions in the planner.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
This is just a trivial update to recognize the BT name, and a
libdivecomputer submodule update to get the updates to libdivecomputer
to recognize the new USB IDs etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Information tab shows the atmospheric pressure. Make this value editable
and also ensure that changes to it are undo-able.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The application state was encoded in a QByteArray. Thus, there was
no compile-time checking. Typos would lead to silent failures.
Turn the application state into an enum. Use the enum-class construct,
so that the values don't polute the global namespace. Moreover,
this makes them strongly typed, i.e. they don't auto-convert to
integers.
A disadvantage is that the enums now have to be cast to int
explicitly when used to index an array.
Replace two hash-maps in MainWindow to arrays of fixed sizes.
Move the application-state details into their own files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A user reports a problem when dives have the same time but different
numbers. The dives appear sorted randomly (effectively they are sorted
by an internal unique-id).
Try to sort by number for dives at the same date in this case.
Fixes#2086
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At some places we use UTF8 string literals. Therefore, we effectively
only support UTF8 build systems. We might just as well remove all
the other UTF_* macros and use direct string literals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some dive computers save GPS data. Currently, this is stored
by libdivecomputer in an "extra field". When generating a
new dive site for a dive try to use this data to place the
dive site.
To do so, create a "dive_get_gps_location()" function. This
function can be extended later to use e.g. event. When creating
a dive site, use the result of this function over a potential
pre-existing dive site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parse_location() function was used in three places. In two
of them, the declaration was in the translation unit. Instead,
move the declaration into a header file, to avoid duplication
and the possibility of inconsistencies.
The "units.h" header was chosen as this is where location_t
is defined.
Moreover, make the string argument to parse_location() "const
char *", so that it can be used on non-owned buffers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This has been a feature people have asked for quite frequently. It is
taking up some valuable screen real estate - so the question could
become if there should be a switch to enable / disable it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds "Import->Import dive sites" menu to mainwindow.cpp and adds the
on_actionImportDiveSites_triggered() method to prompt for the filename
to import from. The files are parsed and then any dive and trip data is
cleared before opening a dialog box to select which sites are to be
imported.
Signed-off-by: Doug Junkins <junkins@foghead.com>
Fixed bug in the Haversine function in get_distance() based on algorithm
at https://www.movable-type.co.uk/scripts/latlong.html and added bounds
to the 'a' term to avoid floating point errors for antipodal points.
Signed-off-by: Doug Junkins <junkins@foghead.com>
This didn't use to matter, because none of the BLE-using backends did
retry on timeout until recently.
But Jef started doing packet sending retry for the Mares Icon backend,
and now we should make sure to distinguish the "IO failed" from "IO
timed out" cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit adds an entry to the dive media context
menu which offers to write a subtitle file. This
creates an .ass file for the selected videos.
In an attempt to to clutter the screen too much, don't
show irrelevant entries (zero temperature or
NDL and show TTS only for dives with stops).
VLC is able to show these subtitles directly, they
can be integrated into the video file with ffmpeg.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Commit c69ca4df80 removed the roleNames
function, which is not needed according to the docs, as a default function
is provided. For unknown reasons this broke the QML combo box.
Reinstate the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Skip gas use calculation for the gas that was used in
the surface segment added by the planner in the end.
Reported-by: philippe@philmassart.net
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The dive splitting code returns an error code when splitting fails, but
it turns out that the C++ UI code doesn't actually look at the error
code, and instead expected the resulting dives to be NULL if an error
happened and the split didn't succeed for whatever reason.
Which is kind of lazy of it, but we might as well clear the resulting
dives and make the UI code happy. This should fix the problem that
Celia Marlowe reported on the Subsurface google groups forum.
Reported-by: Celia Marlowe
Acked-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fixes: 145f70aab5 ("Undo: implement split-out of dive computer")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only external caller of add_single_dive() used it to append a
dive to the global dive list. Rename the function accordingly and
remove the index parameter.
The internal caller can use the local insert_dive() function, which
doesn't consider selection. That shouldn't be a problem, as the
caller is doing import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Trips and dive sites were changed to use dive tables instead
of linked lists. But the memory used for the tables wasn't freed.
Do this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Selecting "Selected dives" exports the dive sites for the selected
dives. Selecting "All dives" exports all dive sites.
XML format is the subsection of the divelog XML that describes the
sites headed with a <divesites> section like:
<divesites program='subsurface' version='3'>
</divesites>
Signed-off-by: Doug Junkins <junkins@foghead.com>
Instead of using a random UUID, use an SHA1 hash of name, description
and notes (if defined). This is necessary for testing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive_site_has_gps_location() function already checks for the null
dive site. Remove redundant checks.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Properly implement the unsaved-changes flag(s). Since we currently have
two kinds of changes, there are two flags:
1) dive_list_changed in divelist.c marks non-undoable changes. This flag
is only cleared on save or load.
2) QUndoStack::isClean() is used to determine the state of undoable
changes. Every time the user returns to the state where they saved,
this flag is cleared.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is copying the dive editing code. It uses an OO design with
virtual functions for getting and setting the values. It doesn't
use templates though, as both fields of strig type. This feels
a bit over-engineered, but it is 1) consistent with the dive edit
code and 2) the number / types of dive trip fields might increase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When pasting (or undoing paste) the cylinders or weights may change.
Send the appropriate signals and update the models accordingly.
Currently, this means copying from current dive to displayed dive,
but hopefully we can get rid of "displayed_dive" in the not so
distant future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove a few cases of
void fun() {
...
}
While touching these functions, fix a few other whitespace
coding style violations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Taglists were only copied in dive.c using the STRUCTURED_LIST_COPY
macro. Export that functionality in a function. This will be
needed for undo of dive-pasting.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive list was not updated automatically when an edit command was
executed. There was already a signal to do that, viz. divesChanged().
But that signal worked by-trip and didn't have a dive-field specifier.
The edit-commands used the divesEdited() signal that isn't by-trip
but has a dive-field specifier.
Unify these two signals to be by-trip and with dive-field specifier.
This needs common code to generate the by-trip list that is moved to
a command_private.h header.
Since there might now be multiple signals (one per trip) actually
check in the main-tab whether the current trip is affected to
avoid multiple update of fields. This has the positive(?) effect
of not doing any update if the current dive isn't changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was a bit different from the other editing commands:
1) Only the current dive is edited not all selected dives.
Therefore, create a function that turns the current dive
into a one-element list.
2) The profile has to be replot. Here, likewise, create a
function to do that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more tricky. There are two modes: set dive site
and set newly created dive site. This is realized using an OO model
with derived classed. Quite convoluted - but it seems to work.
Moreover, editing a dive site is not simply setting a value,
but the list of dives in a dive site has to be kept up to date.
Finally, we have to inform the dive site list of the changed
number of dives. Therefore add a new signal diveSiteDivesChanged.
To send only one signal per dive site, hook into the undo() and
redo() functions and call the functions of the base class there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To keep the UI in a consistent state, update the notes field if
it is changed by an undo command. To that purpose, add a new
signal to diveListNotifier with a list of dives and a field-id
as payload.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one was rather trivial, as there is no actual merging
done. Quite simply, a number of dive sites are removed and
their dive added to a different dive site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement an undo command that edits the name of a dive site.
Connect it to the dive site table, so that names can be edited
directly in the table.
Send signals on undo / redo so that the dive site table and
the dive site edit widget can be updated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce two DiveListNotifier signals which are sent by
the undo commands if dives are added to / removed from the
core.
The signal has the dive site and the index in the global
dive site table as payload. Thus, the model has only to
remove the appropriate rows.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Turn the table functions of the dive site handling into macros
as was already used for dives and dive trips. This has the effect
that the table is kept sorted by UUID.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive- and trip-table functions are generated in dive.c by macros.
Move this macros to a new "core/table.h" header file.
Thus, these functions can be used for other tables (e.g. dive site)
and the trip function can be moved to a separate translation unit
(divelist.c being quite large already).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The other dive- and trip-table functions were already autogenerated.
Let's do the same for these two.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with remove_dive(). Moreover, swap parameter order
in remove_dive() so that both functions use the same parameter order.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new signal to DiveListNotifier. Send signal if dives are
added or removed and therefore the dive count of a dive site
changes. The dive sites are collected and the signal is sent
at the end of the command.
Add code to update the table view.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The second parameter (selected_only) was always false. Therefore,
remove it.
2) Simplify the function by simply returning the reference count.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
