move initialWidth/initialHeight out of subsurfaceTheme to placeHolder,
this secures no change in behaviour.
Signed-off-by: jan Iversen <jan@casacondor.com>
Show all colors in a theme, allowing user to change theme.
This is preparation for allowing users to click on the individual
colors and change them.
Signed-off-by: jan Iversen <jan@casacondor.com>
Make variables and functions static where possible, this is done
to prevent different versions of theme with different values.
Signed-off-by: jan Iversen <jan@casacondor.com>
Use the TemplatePage and TemplateButton in the converted pages.
In order to avoid a bigger search/replace all other pages are left
untouched (for now).
Signed-off-by: jan Iversen <jan@casacondor.com>
Do "git mv SsrfButton TemplateButton", and search/replace
all uses.
The general idea of the templates are to secure common layout,
but also to isolate the Kirigami parts (slowly) in the templates.
Signed-off-by: Jan Iversen <jani@apache.org>
When editing a dive site, the user can search for close dive sites
to merge duplicates. Dive sites without location are treated as
being located at 0N0E. This makes no sense, because:
When selecting a dive site without location, we shouldn't list
dive sites close to 0N0E.
Likewise when having a dive site close to 0N0E, we shouldn't list
dive sites that have no location.
Therefore, ignore these cases.
This also means that now dive sites without location are not
considered as close to other dive sites without location. That
might be a debatable point.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After selecting dives, the selected dive sites are collected.
This was done using the selectionModel()->selection().indexes(),
which is wrong, because it gives one index per row *and* column.
Accordingly, every dive site was added numerous times to the
array of dive sites to be selected. Change this to
selectionModel()->selectedRows(), which gives one entry per row.
Moreover, if multiple dives with the same site were selected,
this site was also added to the array multiple times. Therefore,
check the array before adding sites.
Note that all this should not change the user experience in
any way, it is only a code-hygiene thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Usually, we use PascalCase (i.e. camelCase with a capital
letter at the start) for class names. For consistency, let's
do it here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When starting / changing the dive-site filter, inform the map of
the changed dive site selection by calling
MapWidget::instance()->selectionChanged();
This fixes a bug, where on clicking dive sites in the dive site
tab the dive sites from the *previous* click were highlighted.
Perhaps the selectionChanged() call should be put into the
setSelected() call. But the data flow between the different
parts of the dive-site and map code are so convoluted that I
don't want to risk anything!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We tend to use lower-case filenames. Let's do it for these files
as well. Simple search & replace.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Something is seriously wrong with the default Ubuntu 18.04 environment
on GitHub Actions. C++ builds fail with very confusing messages about
C++11 support.
Switching to building in a Ubuntu 18.04 based container - that seems
redundant, but it fixes the problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A recent merge upstream causes build faiilures because the
PROJECT_VERSION variiable isn't defined. I can't figure out how to make
sure that it is defined correctly, so hack around that by using the
version prior to that merge.
See https://github.com/LaurentGomila/qt-android-cmake/issues/33
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class contains only static functions (i.e. it does not contain
any state). There does not seem to be a reason to have an instance
of that class. Therefore, remove the instance() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QMLInterface::instance() is only used in one single place. This
makes the whole notion of having a global instance of the object
moot, isn't it?
Simply make the object static to the function that uses it, which
guarantees that the object will be created when the function is
called. I.e. the same behavior is retained with less complexity.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It appears weird to connect the QMLInterface signal/slot combination
in a static helper function. This generates a bunch of lambdas that
call the instance() function.
Instead, simply do the connections in the constructor as we do it
in numerous other places.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When either length or volume unit is changed, the text needs to be
changed.
Let signal lengthChanged and volumeChanged cause a recalcation and therefore
new text.
Signed-off-by: jan Iversen <jan@casacondor.com>
In order to be able to roll out new betas, we need to first increment the
version number. Given the magnitude of the changes, incrementing the minor
version (not that we have ever been really consistent with how we do the
numbering in the first place).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gas change context menu was filled from the CylindersModel.
This means that even before saving new cylinders, the user could
add a gas change event to these cylinders.
Instead, fill from the current dive.
Fixes#2552.
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding a gas change event via a context menu, the gas-id and
timestamp were passed in two distinct ways.
1) The gas id was extracted from the text of the action. This meant
doing rather complicated parsing.
2) The timestamp was passed via the "user data" of the action, which
means transporting via "QVariant".
There is a much simpler way to pass arbitrary data, that is strongly
typed: lambdas. Instead of shoehorning the data onto the action in
an archaic way, we can simply connect to a stateful lambda. That's
what they're for after all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It shouldn't happen, but currently we overwrite the displayed_dive
without updating the CylindersModel. Thus, CylindersModel may now
crash when the new displayed_dive has less cylinders than the old
one.
For now, catch this condition. Treat the root cause later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Emit signals for each standard color when theme changes.
The iconStyle property was changed from being a constant, because it can
change, and thus a signal was added.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove extra empty lines in themeinterface.cpp just a cleanup, no functionality
change.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
fontMetrics is no longer used in production code, but still in the theme test
page.
Isolate fontMetrics in ThemeTest page.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to remove fontMetrics from QML, replace references (height)
in DownloadFromDiveComputer and Settings
Add include kirigami as needed
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move setting of font properties used throughout to themeInterface.
Add new settings "currentScale".
The properties are kept in main (subsurfaceTheme) in order not to do
a big search/replace.
Update settings to use currectScale and signal changes in themeinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Check defaultfont and calculate basepointsize in themeinterface instead
of in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were quite a few issues with the code - clearly a complete failure of
code review.
- all values were '??' if a period contained no dives
- imperial units were not calculated at all
- significant truncation and data loss in the way totals were added as meters
and minutes instead of the higher precision data that is available
- several issues in striing conversion methodology, e.g. missing zero padding
for minutes
- missing maxSac
- incorrectly calculated avgSac
- incorrectly claculated number of EANx dives
- hard to read code with most variables named 'temp'
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Solve kirigami error:
INFO: qrc:/org/kde/kirigami/ScrollablePage.qml:187: TypeError: Cannot assign to read-only property "parent".
Kirigami.scrollPage does not allow a ListModel be defined, even though it is allowed in QtQuick.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add dive_move variable to qmlinterface, to make it aviable to QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We never noticed this before, but during the build of the Trusty Qt5.12
container itself we create libdivecomputer include files and we ship them with
the container. And as the recent build failures after an incompatible API
change in libdivecomputer show, those include files are apparently used in this
build, not the ones that are newly created during the build.
Obviously the build container needs to be fixed, but as a quick workaround,
this should do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace subsurfaceTheme with ThemeNew, since there are still 2 objects
subsurfaceTheme in main.qml and ThemeNew in themeinterface.*
Replace theme color references with ThemeNew, as they are no longer available
in main.qml (subsurfaceTheme).
Signed-off-by: jan Iversen <jan@casacondor.com>
Move setup call and registration from subsurface-helper
to themeInterface, in order to keep the registration where the code
are.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add DivePlannerSummary, a page to show in dive centers.
Allow user to select period for the 2 colums in DiveSummary.
Default is "Total" and "3 month", but allowing the user to change
these, make it a very simple tool to view how the user progresses.
Variables are taken from Backend.
[Dirk Hohndel: adjusted text strings as these aren't really months]
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create DiveSummary class in backend-shared and make the DiveSummary calculation
results available to QML.
This adds a loop over all dives (could have been done with a model, but the
models available to mobile are very limited, so use the basic way).
[Dirk Hohndel: renamed the results variable and combined a couple of commits]
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add property "colorBackground" to allow instances of templateLabel to have
background color overwritten.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Windows had it's own direct socket implementation for rfcomm (ie legacy
BT), while all the other platforms used QtBluetooth.
This makes Windows do the same thing. Hopefully modern Qt libraries now
work well enough on the Windows platform for this to work, but I can't
test it.
We can make a test build that Windows people can try, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jef has changed the libdivecomputer iostream layer and extended it in
two different ways:
- iostram's now have a 'poll()' method, which does what the name
implies: waits for data to be available with a timeout.
- iostreams now have a 'ioctl()' method, which can be used to implement
miscellaneous operations. Right now the two ones that you can do are
"set latency" (this replaces the old 'set_latency()' method) and "get
BLE name" (this replaces our 'get_name()' method that was never part
of the upstream libdivecomputer interfaces)
Neither of these is all that complicated, and the transition is fairly
obvious.
HOWEVER.
I have absolutely no idea how to do 'poll()' on Windows sockets, and I
have no intention of figuring it out. We use a direct socket interface
to implement the (non-BLE) RFCOMM bluetooth serial protocol, and I'm not
sure why Windows is so special here. I suspect - but cannot test - that
we should just switch the Windows RFCOMM implementation over to the use
the same QtBluetooth code that we use on other platforms.
I assume that the Windows Bluetooth support was originally not
sufficiently good for that, but these days we depend on Qt doing BLE for
us even on Windows, so presumably FRCOMM works too.
That would be a nice cleanup, and would make 'poll()' work on RFCOMM
under Windows too. However, since I can't test it, I've not done that,
but instead just made the Windows RFCOMM 'poll()' method always return
success. That may or may not get the thing limping along.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A lot of whitespace issues have snuck in recently, this just cleans those up so
that I don't need to hand-edit patches every time I touch this file (since
QtCreator automatically fixes whitespace when I make changes).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply replace it with QLatin1String. There is a tiny performance penalty,
but none of that code would care.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
