A not perfect improvement, but way better IMHO. Prevent the list of
downloaded dives to grow over the buttons at the bottom. Just a simple
change by adding a bottomMargin to the list.
Notice that there is still some overlap, but for now I consider this a
trade-off between the scarce screen real-estate and the wish to present
and much as possible dowloaded dives.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trip headers spanning more than one line where broken at incorrect
locations in the string. Not exactly sure, but I think this came with
the newest Kirigami SHA, and especially the Label change.
Carefully reading the code for the trip heading shows a "strange"
negative margin. So the margin is on the outside. This margin was
used to split the string, allowing for a small invisible part of
the string to present as trip header.
This is solved by this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This does two main things to the map widget:
- if there are no coordinates, do *not* zoom out to the whole-world
view. Just leave the map alone.
- when zooming out to move to a new dive site, zoom back in to the same
zoom level it was before.
These two changes make it much more pleasant to move between dives,
particularly as you move back-and-forth without losing the zoom level.
NOTE! The zoom level gets reset if you move dives _while_ zooming is
happening, and so moving quickly between dives will still end up losing
the original zoom level, replacing it with a bigger zoom-out that was
active _during_ a previous zoom.
That could be seen as a feature (moving incrementally to an "overview"
zoom when moving quickly between dive sites), but honestly it smells
more like a bug to me. But regardless of that feature/bug, this new
zoom behavior is more pleasant than our older "always reset when
moving".
But it might be a matter of taste, so people should try this out and
comment.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation,org>
Cc: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Again, mostly related to label change. First, the top button was "glued"
to the top of the screen, so added a little margin there. It
appeared that all the other items on the screen (progressbar,
2 button rows, and the downloaded dive list) where not moving down
due to the add of that little top margin. This was solved by
anchor-ing the items together. Finally, the text of a downloaded
dive was on the top of the delegate lines. Not sure where that came
from, but easily solved by centering it explicitly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As in a525fff112, also the dive details top data was not nicely positioned
any more due to the deprecated and removed Kirigami.Label.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The new SHA for Kirigami did all kinds of nasty things to our DiveList.
This commit tries to repair most of the damage. Nothing more than
some margins, anchors, and even a font that changed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commit 8f6827ab12 brought a new SHA for Kirigami, but that introduces
a very noisy logging of "Kirigami.Label is deprecated. Use
QtQuickControls2.Label instead".
So, thats what done here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
First, obviously, I could have squashed this small commit into
the previous one, but I explicly decided not to. It shows
the fragility of all this credential processing code, and
the complex flow control troughout the code.
Testing on a brand new install, and immediately going for
a no cloud setup, the PIN screen was shown, instead of an
empty divelist. Looking at this small code change shows why.
In case of a no cloud situation, there is no PIN to verify
(or email and passwd rules checked). So just do not force us
there.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Before this change, there was only one way to create the local
no cloud repo on the device. The user needed to add at least
one dive to the no cloud account (so that there is something
to save). While this worked in some scenarios, it could also
get things in an inconsistent state: credential status = CS_NOCLOUD
but no local repo. This was a dead end.
In this commit, the creation of the no cloud repo is made more
explicit. When asking for no cloud mode, just create an (empty)
repo for it when it does not yet exist, and otherwise, just
open the existing (possibly empty) repo.
Now, a user can have no cloud repo, next to (any number of)
cloud accounts.
This leaves one functional aspect left: how does a user abandon
the no cloud repo, by merging his data into a true cloud
account. This is code for this, that tries to do this merge in
a smart way. This seems to be broken (too). To be clear: this
is no part of this commit.
Fixes: #667
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It can be difficult to distinguish the new marker
which is added on the map and has to be dragged
when editing a new dive location.
By adding a new grayed-out marker it becomes
possible to gray out all other markers, while
the current marker which is being edited is still
bright red.
Suggested-by: Dietrich Meyer <dietrich@sunnynames.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML map uses MapItemView. MapItemView needs a delagate
in the form of a MapQuickItem. The MapQuickItem needs a
'sourceItem' which would be used as the visual (e.g. marker)
on the map.
If the root sourceItem is of type Item, the marker becomes
non-clickable. If the root sourceItem is an Image, the clicks
work.
This patch removes the root Item, which makes the code
less organized, but at the same time it fixes the bug.
Bug reproduced on the following Qt versions on Ubuntu:
5.5.x, 5.7.x
Bug cannot be reproduced on Qt 5.9.x on Windows.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This commit implements possible switching BT on and off during a session,
so not needing a restart of the app when the user forgot to switch
it on when starting the app.
For this, the following needed to be done: 1) create a handler that
reacts on local BT device status changes. 2) repopulate the connection
list in the download screen when a BT status change is detected.
Notice the subtile change of the Q_INVOKABLE btEnabled() function
to a Q_PROPERTY. This gives a nice dynamic behaviour when
switching BT on/off with the app open.
Fixes: #556
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In certain places the '(int)' cast is used, while in other the
llrint() or lrint() functions. Make the conversation from degrees
in the 'double' form to the 'int' degrees_t consistent using lrint().
lrint() is the function which should give the best results,
because it accepts a 'double' and results in a 'long'
even if degrees_t is 'int'. If the truncation from 'long' to 'int'
is discarding some of the precision then the next step
would be to turn degrees_t into a 64bit signed integer type.
Possible fix for #625.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Commit cf8e87545f implemented a way to cancel pin setup,
and this also has effects on an exit from the app after pressing
the android exit. The change button started with clearing the
email and passwd in order to get the credentail page(s) active
again. While this worked ok, it confuses users that exit the
app from the credential pages, resulting in the need to enter
the credentials again after a restart. It appears that clearing
the credential state is sufficient to get the pages active.
Notice that the android exit is still not working (it seems
a no-op), but the interaction with the buttons in the app
preserves the email/passwd.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The old credential status should only be set when changing the
actual credential status using the setCredentialStatus function.
Setting it here is just wrong. It sets the old status to the
current, and than adds the current to the prefences,
obviously, resulting in old = current, which can not be right
and results in a wrong flow of control in the credential state
processing.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
If the QML modules for QtLocation and QtPositioning are
missing the QML in mapwidget.cpp will fail to load,
which can lead to crashes.
To solve the issue check if the QML has loaded and set
a flag 'isReady' to true. If the loading has failed
load another QML which is for showing a red error text
in the lines of `MapWidget.qml failed to load!`.
If the map QML has failed, use a macro in all relevant
MapWidget members to turn them into a NOP. This approach
leaves the rest of the codebase intact - e.g. no checks
in classes which connect to the MapWidget class.
Fixes#596
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This commit is empty when shown with '-w' - it just updates the
indentation after commit c00804eff6 ("QML UI: always start edit at top
of page").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When starting to edit / add a dive, the Flickable needs to be positioned
at the top of the page, not the last position shown.
For clarity I'll do the re-indentation in the next commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hard switch was not ideal. This isn't perfect, yet, but a step in
the right direction. The 'transitions' to change the visibility
properties are a bit odd, but that's how it's done in the examples as
well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need a white path drawn on the dark action button, but a black path
drawn for the main menu.
(looks like a white space change snuck in here)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addresses some review comment on whitespace and translated
string formatting.
In the string formatting, a tiny additional change is made.
I wanted the email address in the explanation text in a bold
font. Using the HTML <b> for this, removed the /n newline
characters in the output. Apparantly, mixing these two
formatting styles does not work. No problem, replaced the
/n to HTML style too.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit tries to implement most of issue #515. It reworks the
one credential page, which its dynamic PIN part, into two pages.
Main driver of selecting one of the two pages is the showPin
boolean. Page 1 contains the email/passwd field (and the
option to use a no cloud setup). Page 2 only contains the PIN
part (and the option to cancel the process).
The Kirigami central button does not seem very handy here. We
need, for example, a cancel, sign-in and register, only register,
etc. buttons, which are not easy to handle in specific icons.
Therefore, normal pushbuttons are chosen to deal with user
interaction, and the Kirigami button is removed from these
pages.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Previously, we could edit the cloud credentials in basically two
places. At startup of the app from a fresh install (and no previous
data on the device), and from the settings. Issue #515 proposes
only one way.
However, we need a way to access the new credential UI pages, so
that the pages at a fresh install of the app can be reused,
for example for account switching.
This commit replaces the settings cloud credentials block by
a simple (not editable) display of the current credentials, and
a button to access the initial pages, for all management tasks
on the credentials.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit is just a precaution. It makes sure that the old
(aka previous) credential status is correctly set on all changes
of this status.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a very subtile bug. Testing/developing on the desktop for mobile,
with a normal logbook in a git repo, resulted in a surprising effect.
When swichting from a cloud account to a NOCLOUD situation, the no cloud
repo was (not always) reset to the NOCLOUD_LOCALSTORAGE, but to the
normal logbook. Resuling in commits in the wrong repo.
This can easily be solved by setting the filename to NOCLOUD_LOCALSTORAGE,
when switching to NOCLOUD mode.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In case the credential state is NOCLOUD, the saving of credentials
in the preferences was suppressed in case of invalid data in the
email/passwd fields.
There is no reason to check these fields for correct input, as they
are not used in case of NOCLOUD mode. A simple if statement is added.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As written in 8d9ad3cfea7e4c0875, the user needs to be able
to exit the PIN entry UI, in case no PIN can be received due
to a wrong email address.
The simplest way seems to just clear the cloud credential data,
and let the user try again. Obviously, we could argue if the
exact previous state of the 1st credentials screen could
be restored, but as it is only 2 simple fields, of which
it is higly likely that the email adress is misspelled (and
the password hidden), it seems overly complex to implement.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Makes sure that the CS_NEED_TO_VERIFY status is carried forward
and sets the showPin flag that triggers the 2 different states
in de QML UI.
The new credential UI will have one page for username/passwd,
used for setting up an account or switchting to a different
account, and a second page to enter a PIN only.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In case the credential status is UNKNOWN, and the cloud username
and password are empty, do not go automatically to NO_CLOUD status.
This is (again) preparation for future work on credential management.
For example, the user entered an email address with a spelling
error, so does not receive a PIN code email. This user needs a
way out, so there needs to be a <cancel> button on the PIN code
screen. And the most logic was of cancelling is emptying the
entered username/passwd and let the user try again.
Without this change, the user immediately gets into the (somewhat)
final NO_CLOUD state, which will result in (very) confused users.
With this change, there is exacly one way (left) to get into a
NO_CLOUD setup: hitting the proper button, so a deliberate user
action.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It appears that the onCompleted of the StartPage item is triggered
before the onCompleted of the rootItem. This is logical as the
Startpage is a child of the rootItem. And, yes, this does matter.
As the divelist also contains the logic for initial cloud
registration (and is the default page shown in a state where
the cloud credentials are valid (CS_VERIFIED state)), we need to
know the correct credential state at start of the app.
The move of this one line of code makes sure of that, in addition
to setting the credential state from the preferences. Now, the
setupActions function can reference correct credential data.
This is further preparation for a better cloud creation
process from mobile.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
MapWidgetHelper::calculateSmallCircleRadius() uses
the second argument (boolean) of QDeclarativeGeoMap::toCoordinate()
and QDeclarativeGeoMap::fromCoordinate(), which isn't supported
in Qt 5.5.x and errors will be thrown on runtime.
This argument usage is redundant for the calculateSmallCircleRadius()
use case.
If the argument is set to "false" it tells the map to avoid
clipping the viewport and always return a valid QPointF/QGeoCoordinate.
Given that calculateSmallCircleRadius() only works with the
map center - i.e it's called like so in MapWidget.qml:
onZoomLevelChanged: mapHelper.calculateSmallCircleRadius(map.center)
The only way for the radius estimation to fail is if the map widget
width is smaller than SMALL_CIRCLE_RADIUS_PX * 2 = 52px, which is not
possible as the MainWindow splitter prevents it.
If the map widget becomes that small it would be hardly usable,
yet no errors should be thrown related to this change.
Tested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Following on beb0d5703a, the context menu seems to work fine
with a much older QtQuick import - version 2.0.
The 2.7 import is technically a development leftover
and a minimal version should have been considered earlier.
On older Qt setups (e.g. 5.5.x) this might throw a:
'module "QtQuick" version 2.6 is not installed'
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Having two different enums around with more or less the same
definition has lead to unclear code. After removing two not needed
states on the mobile end, the remaining step to one enum for the
credential state becomes almost is simple rename operation.
Unfortunately, I do not know a way to embed a plain C enum
from pref.h into the QMLManager object. So after this, there
are still 2 enums around, but now identical.
This commit is not changing any functionality.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
And here, the removal of a second superfluous state from QMLManager.
This is true no-brainer. While this state was set once troughout the
entire mobile code, it was never tested for this state. Testing shows
that it is safe to change to the UNKNOWN state.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a no-brainer removal of the VALID_EMAIL state used in QMLManager.
All current usage of this state is "if state is VALID or VALID_EMAIL",
so there is no distinction between the two states.
It is even a little different. The comment suggests "when we can open
a local cloud storage, tied to a cloud account (so explicitly not
the no-cloud status), we have at least a valid email". While this
is formally true, this implies that there is also a cloud account
on the cloud server (ie. the cloud account is in a VERIFIED state).
In other words: currently, there can't exist a valid local storage
that is tied to a valid email adress, without valid cloud account
on the server.
Notice that this touches the discussion on GitHub for commit
e76f527fe5 (pull request #520). Can we implement the creation
of a valid cloud account without data link to the cloud server?
Currently, we need the server to confirm the email address (for
example for uniqueness reasons on server side). Obviously, we could
hack our way out of this, but we have a perfect solution already
in place. Create a no-cloud account, and transfer that later to
a true and valid cloud account.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When we want to go the NOCLOUD credential state, do not go the
incorrect INCOMPLETE state.
This is the first in a series of unraveling the preference parameter
prefs.cloud_verification_status and the data that is carried around
in the QMLManager::credentialStatus_t.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The default location which is used when the
PluginParemeter "googlemaps.cachefolder" is not specified
should be ~/.cache/googlemaps on Linux or
/user/<name>/appdata/local/cache/googlemaps on Windows.
This patch moves the cache to the default system location
where we store the printing templates, cloudstorage and the
default user XML file.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The googlemaps plugin is about to support tile language
via the PluginParameter 'googlemaps.maps.language'.
To be able to pass the subsurface UI language (obtained
from the uiLanguage() helper) the Plugin has to be created
dynamically, only *after* the MapWidgetHelper is created.
MapWidgetHelper::pluginObject() now provides a QString which
contains the Plugin object and also include the uiLanguage
ISO value.
This string is used in mapwidget.qml as:
map.plugin = Qt.createQmlObject(pluginObject, rootItem)
This creates the Plugin object dynamically with the proper
UI language string, but also requires a couple of small changes:
- move the declaration of map.mapType after the
Qt.createQmlObject() call
- assign map.activeMapType after map.mapType has a value
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Looking for already existing locations with
m_mapLocationModel->getMapLocationForUuid() will not cover dive
sites which are too close to each other and are skipped when
creating MapLocations. See reloadMapLocations() and the usage of
MIN_DISTANCE_BETWEEN_DIVE_SITES_M.
Constructing a new QGeoCoordinate for the already retrieved
dive site (ds) coordinates ensures that we are traversing
*all* dive sites at the backend and not only those visible on the map.
Fixes the issue where not all dives in the DiveList are selected,
even if a dive clearly happened on a location currently visible in
the map viewport (map -> context menu -> select visible dive
locations).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML Map has a couple of methods - toCoordinate(someQPointF) and
fromCoordinate(someQGeoCoordinate). Ideally, if one passes a point to
toCoordinate() and then attempts to convert the resulted coordinates
back to the point, the same point in the Map view port with minimal error
should be retrieved. That's not always the case - e.g. near
47.400200 -123.142066, which means that the methods are not exactly
*reliable* and there might be Map class bugs at hand.
The new zoom-in and zoom-out improvements try to work around the above:
- for both centerOnRectangle() and centerOnCoordinate(), if no good
zoom-out level is found (newZoomOut), the zoom-out is set to the default
value of defaultZoomOut. In practice, this prevents the case where the map
does not zoom-out at all when going from one place to another
- centerOnRectangle() now uses rectangle diagonals to estimate a fit,
instead of checking if 2 points (top-left and bottom-right) are visible
in the viewport. The usage of fromCoordinate() was giving bad results
in this case and comparing distances (diagonals) is more reliable
but more expensive on the CPU.
Due to the inconsistencies of toCoordinate() and fromCoordinate()
the dynamic zoom-in and zoom-out are still not ideal, but the current
implementation is somewhat usable with decent accuracy.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This appears to fix the mystery crashes that can occur when deleting a dive
from the dive list.
Fixes: #497
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
This gets rid of TypeError messages, but does not appear to affect behaviour
qrc:///qml/DiveDetailsEdit.qml:254: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:228: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:216: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:204: TypeError: Cannot read property 'dive' of null
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
MapWidgetContextMenu now has a new action (SELECT_VISIBLE_LOCATIONS),
that will invoke the MapWidgetHelper method selectVisibleLocations().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The new method selectVisibleLocations() contains a routine
to find all visible MapLocation objects in the Map viewport and
select the dives associated to said MapLocation objects.
This method is to be invoked from the QML context menu.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
First, this function calculates the zoom out effect until both the
current Map center and the target rectangle are visible - see the
"calculate zoom out" part.
Then it calculates a zoom level, so that the target rectangle
fits the viewport, but also so that the zoom is not too much (clamped).
see the "calculate zoom in" part.
NOTE: "centerStored" (the variable used to store the current map center)
is created using QtPositioning.coordinate(), because the code needs a new
object and not a reference of the map.center QGeoCoordinate object.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add stopZoomAnimations(), which is really just a precaution
function to make sure we have stopped all animation of the
map before doing calculations! Since the animation *should*
be running in a separate thread, this would make sure the Map "center"
and "zoomLevel" properties do not change.
Add pointIsVisible(), which is a helper to determine
if a point created by map.fromCoordinate() method is inside
the viewport. fromCoordinate() has to be called without the
"false" (clip) flag for this to work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
MapWidgetHelper::centerOnDiveSite() now checks if more than
one dive sites are selected and finds the most top-left and
bottom-right ones in the coordinate system to form
a rectangle.
It also supports the special cases where a selected dive site
does not have coordinates or the case where only a single dive site
with GPS coordinates are selected.
TODO: implement mapwidget.qml::centerOnRectangle()
This QML function will receive a QGeoCoordinate based rectangle which
has to be centered in the viewport with animation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
For instance, if the 'googlemaps' geoservices plugin is missing
a new message is now shown:
"qml: MapWidget.qml: cannot find a plugin with the name 'googlemaps'"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Do so until the following issue is resolved:
https://github.com/vladest/googlemaps/issues/9
With the satellite map ([1]), the black tiles at relatively high
zoom levels over the Red Sea cannot be seen. Instead it shows white
tiles at the ultra-maximum zoom level at places.
As a side note, the "satellite" map does not have the country labels
which the "hybrid" map has.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
No idea why this was restricted to be so narrow. Also, making
the font of the label smaller and lighter seems visually more
pleasing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes sure that the autocompleting comboboxes never displays the scroll list where the user can pick an entry, and as such forces the view of a autocompleting textfield from the users point of view. The reasoning is that when scrolling in the drop down list it it possible to scroll to far and thus abort the ongoing edit by flicking away the edit page.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Mobile devices hare rather limited when it comes to screen size,
there is no point in reducing the availabel space more than neccecary.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This handles a cornercase where a user starts editing and then cances the divedit followed by a return to edit mode. The previously acive textfield would then be active again even though all changes are lost.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
For some reason the textfields on dive edit page did not loose focus when editing ended by press on the return key.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When the user makes a selection using the autocomplete function while editing a dive the keyboard should close and the selection list should disappear.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add star icons from the material repository.
https://material.io/icons/
The icons are under Apache License Version 2.0
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This patch makes use of the geolocation plugin "googlemaps"
for Qt Location with source code from here:
https://github.com/vladest/googlemaps
The change from the ESRI plugin is that it requires new indexes
for the Hybrid ([3]) and Street ([0]) map types.
There are more zoom levels in this plugins, but our default zoom-in
settings seem to transition well to it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
In commit e76f527fe5, the scenario of switching between 2 already
VERIFIED cloud accounts was identified, which was working poorly. It
needed a restart of the app to get the new account visible.
Reason for this, was the setting of the credentialStatus to the value
of an undefined (never set) old credentialStatus. This commit makes
sure we have a defined credentialStatus, just before changing it to
the new one.
A really mini step forward, as the behavior is still not perfect. Now,
the user has to select the dive list manually, after entering
credentials of the new clould account.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The PIN (and cloud account creation) is not limited to the
desktop (any more). Correct the string accordingly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
I thought we had this automated, but Lubomirs commits introduced a few
files with dos line endings. This is purely a change of line endings, no
other changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The C++ side for the desktop version already does that. Add a slot
for that in QML, for later use in the mobile version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The editing support is added via dragging. It is handled via the
MouseArea's drag.target of the MapQuickItem. The drag target changes
with the model selectedUuid.
"mapAnimationZoomIn" now also does an initial zoom-out before moving
to a new location.
centerOnCoordinate() now pefroms calculations to determine how much
the animation needs to zoom out. What it does is it reduces the Map
zoomLevel util both the current and the new target coordinates are visible.
It then restores the zoomLevel and performs animation based on newZoomOut.
animateMapZoomIn() is now obsolete.
The patch also includes the following smaller changes:
- remove the setSelectedUuid() call in deselectMapLocation()
This is now handled in C++
- sets "defaultZoomIn" to 12.0
- use ">=" when determining if a mapItem text should be visible
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapWidgetHelper QML instance now has the slot onEditModeChanged()
which toggles the visiblity of a newly added message box that
notifies the user if editing mode is enabled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
updateCurrentDiveSiteCoordinates() should be called from
QML when a marker changed it's location. it emits the coordinatesChanged()
signal, which should be tracked in the MapWidget class. The MapWidget
class should emit the same signal to the MainWindow (Marble does that).
editMode is now a boolean property, which should put the QML map into
editing mode.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The marble globe tracks dive sites with the same name and discards
such that are less than 50 meters apart.
We already store names in MapLocation objects, but using a
QMap<QString, MapLocation *> to check the names is probably faster
with the expense of using more memory.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Call setSelectedUuid() from C++ also center on coodinates instead
on a MapLocation, as there is no point to pass the MapLocation object
back to QML.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapItemView delegate now includes a white Text element.
It uses the MapLocation "name" property as text.
This text is only visible if the map zoom is above "textVisibleZoom".
For hundreds of dives, using the DropShadow effect for the text
makes it laggy. Instead, using a fake drop shadow (duplicate black
Text under the default text) makes it much better.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapLocation QObject now has a QString property "name", which is
translating the dive_site->name member.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The buttons are positioned bellow the "toggle map type" button
and increment / decrement the zoom by "zoomStep" (2 for now).
Also clamp the zoom-in level to "map.maximumZoomLevel".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Double clicking a marker or the newly added MouseArea now performs
a +2 zoom-in over a period of 500ms and centers on that clicked
coordinate.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Different actions might be performed depending on the count of selected
dives - e.g. deep zoom only for a single selected dive.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The signal emits a QList<int> filled with dive idexes from the
main backend dive table.
The MapWidgetHelper QML instance handles that in onSelectedDivesChanged().
This will only be needed for the mobile version, as the desktop version
should connect it's own slot in MapWidget.cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Based on a current location (MapLocation), iterate the dive list
and add nearby dives (distance smaller than m_smallCircleRadius) to
a local QList property (m_selectedDiveIds).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea of this flag is to be able to only to emit the
selectedLocationChanged() signal when the user clicked on the map
(fromClick == true).
MapWidgetHelper::selectedLocationChanged() listens for this signal
and only then it will select nearby dives based on a "small-cicle".
If "fromClick" is false, it's the backend or the dive list that
updated the selection and MapWidgetHelper::selectedLocationChanged()
should no be called.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Each time the zoom changes MapWidgetHelper::calculateSmallCircleRadius()
is called, and the "small circle" radius is stored in both C++ and QML.
On the C++ side this radius will be used to select multiple nearby
dives.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Based on a QGeoCoordinate, calculateSmallCircleRadius() calls
some QML Map methods to obtain how big a circle is in meters if
a circle is drawn over the Map widget with radius SMALL_CIRCLE_RADIUS_PX
pixels.
This is called a "small circle" of a sphere:
https://en.wikipedia.org/wiki/Circle_of_a_sphere
This "small circle" radius becomes huge if the map is zoomed out, while
quite small if the map is really zoomed in.
The idea behind this circle is to be able to select multiple nearby dives,
when clicking on the map (TODO).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Use QGeoCoordinate::distanceTo() to skip dive sites
which are too close (50m) to dives sites which are already added
as MapLocations.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This method uses the helper printGPSCoords() to format the
coordinates of a location into either decimal or sexagesimal.
The selection is handled by the boolean flag "formatTraditional"
and the user preferences flag - prefs.coordinates_traditional.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
openLocationInGoogleMaps() now can be used to open a URL in an
external browser, triggered by the context menu. Use the same
Google Maps URL formating as in main.qml showMap().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The actionSelected() signal is now dispatched when the user selects
an action from the menu (see the "actions" object). Then the declaration
of the MapWidgetContextMenu object in mapwidget.qml can catch that
signal in the onActionSelected() slot and obtain the action via
switch() branching.
The actions enumeration is kept in QML for now, with the idea that
specific C++ methods from the mapwidgethelper class will be called
directly (if marked as Q_INVOCABLE), instead of a generic
onMapAction(action) C++ method in the helper. But if the actions
are possible from QML (like copying to clipboard) and are also
small and non-expensive, it might be better to keep them
in mapwidget.qml.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- move the readonly properties near the top of the root Item
- move the rest of the properties bellow the readonly properties
- make the ListView Timer as a child of the ListView
- slight rename of the timer ID
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
NOTES:
- the ListView object uses lsitItemDelagate to display all elements from
the model listModel
- onCountChanged() is used to adjust the x position based on the
maxItemWidth property which is calculated when the items are populated
with text
- onVisibleChanged() is used to deselect the last selected item by
calling listModel.selectedIdx = -1
- onOpacityChanged() i sued to make sure that the View is hidden if the
opacity becomes 0.0
- inside the View there is a MouseAre which obtains the selected item via
indexAt(x,y)
- there is a Timer with id listViewVisibleTimer, which is called each
time the user selects an item from the list and the timer performs a
"delayed hide"
- a couple of State and a Transition objects are used to preform smooth
fade-in / out animation when the ListView is hidden or becomes visible
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This property would act like a state flag. If -1 (default) no QML State
animation will be pefromed, otherwise the ListView will either fade in
(1), or fade out (0) when the user clicks the context menu button
(Image) or selects an item from the list.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The ListView delegate is a simple Component with a parent Rectangle.
It contains a text field with the ListView action.
This patch also defines some properties for the delegate animations
and looks. The property maxItemWidth tracks the width of all item
text, and makes the width of all items be of that value.
The above prevents potential issues when a fixed width item is used
and some translated language string cannot be fit inside of it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Menu item indexes are enumerated in the object menuItemIndex, while
menuItemData, holds an array of objects which will define the number
of items, with indexes (idx) and text (itemText).
When the ListModel is created, it's dynamically populated from
from menuItemData.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The anchor of the menu itself will be positioned near the edge of the
map widget, while the menu contents will have negative coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This QML component will be used to provide a context menu for the
QML map widget. Include the file in QRC and test it's creation
in MapWidget.qml.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Make the "enumeration" local to the Map object for now.
This will possibly break if another plugin is used in place of the
ESRI plugin, but it will simplify the map toggle button which is about
to be implemented next.
If support for multiple plugins is added on runtime a simple
helper function will be needed that will check the current plugin "name".
And return the appropriate supportedMapTypes[X] for e.g. STREET of that
plugin.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML based map will have a toggle in the top left corner to toggle
between the satellite and steet tiles.
The images are created specifically for use in this Qt Location widget
and are free for use in Subsurface.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The animation sequence when deselecting a zoomed in map location, should
be:
- zoom out completely
- pan to center
To achieve that a new animation object is created - "mapAnimationZoomOut"
The previous zoom in animation is renamed to "mapAnimationZoomIn".
The map functions centerOnMapLocation() and deselectMapLocation()
now call the helper functions animateMapZoomIn() and animateMapZoomOut().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
If a divesite doesn't have a GPS location we want to deselect
the currently selected markers and zoom out the map. In the Map
QML object the function deselectMapLocation will handle that.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
It's best to only animate the flags when clicked, thus play the animation
in the onClicked() slot from the MouseArea.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
To be used to center the map on a dive location or reset the map
if a dive from the dive list doesn't have GPS coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When centering on a map location, use the predefined zoom
map.defaultZoomIn.
Later the map should be able to center on (0, 0) and zoom-out
if a dive doesn't have GPS data.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The rest of the QML code in subsurface doesn't use the ';' to
end a line of code or a declaration. Remove all the redundant ';'.
Also clean extra blank lines.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
If a marker is clicked it's source image changes, which will
call the onSourceChanged() slot. If a marker is selected
play the newly added sourceItemAnimation which is a short scale
animation for the image.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
These properties will be used when zooming-in on a map location
or when zooming out if no map location is selected.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The function in QML centerOnCoordinate() is now renamed
centerOnMapLocation() and accepts a MapLocation object, so that
a marker is selected (based on UUID).
In MapWidgetHelper::centerOnDiveSite(), the pointer to a MapLocation
is retrieved via MapLocationModel::getMapLocationForUuid(). Added in the
previous commit.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When MapLocationModel updates the selected marker, MapWidgetHelper now
receives a signal. The slot is named selectedLocationChanged().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add a MouseArea to the MapItemView delagate and onClick set
the "mapHelper.model.selectedUuid" to the uuid of the clicked marker.
This updates the "selectedUuid" property inside MapLocationModel.
Based on "mapHelper.model.selectedUuid" it is now possible to
show two seprate images for selected / deselected markers.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The "uuid" property will be the one from the dive_site. At first it
will also be used to track the active marker/flag selection.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The image for the unselected marker is now a slightly darker flag.
Same behaviour as the current Marble implementation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Rename the QML function "centerOnCoordinates" to "centerOnCoordinate"
and pass a QGeoCoordinate to it in ::centerOnDiveSite().
This will prevent the creation of a QGeoCoordinate object on the
QML side and instead it will be created in C++.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This method should be used if many markers are added at once.
It's main purpose is to reduces the number of beingInsertRows()
calls.
Make MapWidgetHelper::reloadMapLocations() use it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
reloadMapLocations() is the method which is called when the list
of markers (model) should be cleared and re-populated with new MapLocation
objects.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Instead of maintaining a seperate latitude/longitude values
in C++ and passing them to QML separatelly, pass them as a QGeoCoordinate.
This reduces the number of model "roles" and also prevents the creations
of extra objects in QML (e.g. via QtPositioning.coordinate(..)).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
MapItemView is the QML class that handles the "create map markers based
on a model". In this case the model is created as part of the
MapWidgetHelper, so here passing "mapHelper.model" to the "model"
property is enough.
The delegate receives coordinates from the model as "model.latitude",
"model.logitude" and converts them to QGeoCoordinate.
The "sourceItem" image for the delagete is just an image ATM and is
fetched from QRC.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea here is that the QML code should be able to fetch a model
from the MapWidgetHelper instance which is instantiated inside the
QML code; fetch it in the lines of "mapHelper.model".
This way, updates at the backend would be reflected on the Map QML widget.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When calling centerOnCoordinates() the map will now animate over a
period of 3 seconds the zoom level and over 2 seconds the center
of the map.
Can be tweaked and improved later on.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This function can be called to center the map on a specific coordinates.
For the C++ version call it via QMetaObject::invokeMethod() in
centerOnDiveSite().
TODO: add QML property animations.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
MapWidget sould not handle any of the map backend.
Instead it should just pass calls to MapWidgetHelper.
Do that for centerOnDiveSite().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea here is that the Map object can be controlled from C++ via
the "m_map" private member. Also, for the mobile version, QML code can
call the same C++ methods (if marked as Q_INVOCABLE).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This instance in the QML code itself will be accessed by both the
mobile and desktop version. That way, the map code between
the two Subsurface versions will be shared.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea with this class is that it should be used by both the mobile
and desktop version.
TODO STEPS:
1) the class should be registered in both the mobile and desktop version
with qmlRegisterType<MapWidgetHelper>...
2) the MapWidget.qml should create an instance of this class.
3) this way the helper will be part of the QML and both the desktop and
mobile version can have access to it.
4) the desktop version as a first implementation can just use findChild()
in desktop-widgets/mapwidget.cpp.
5) desktop-widgets/mapwidget.cpp on the desktop should just translate
calls from the rest of the desktop-widgets to this helper class.
6) the mobile version access to this object would be easy but is off the
scope for now.
7) the idea, when implementing the desktop support is to make it so
that when implementing the mobile version later, no or only minimal
changes would be required to the MapWidgetHelper class.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add a local "enumeration" (object) for the two possibly map types
of interest: SATELLITE and STREET.
Use SATELLITE by default.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The root element is now an Item and also doesn't have explicit
anchors and dimensions as these will be handled by the parent:
- on desktop: a QQuickWidget
- on mobile: any QML based QQuickItem
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Like the subject says. We do not want the password to be made
visible, so a switch to show it, is useless and is therefore
removed. Futher, the entry mode is set to PasswordEchoOnEdit,
which causes the passwd to be visible (for easy entry), but
can't be made visible again after save/end edit.
Fixes: #512
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Kirigami prevents us from altering the color of the gps icon in the action menu. So let's display an gps fix icon in the lower left corner of the drawer when the location services is running, colored to match the themes primary accent color.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Independ of the settings, the threshold to reset the GPS data was
hard coded to 5 minutes. Now, honour the entered (and updated during
a session) time to refresh the GPS data in the location service.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Not the lsit is much more compact and shows a lot more dives even on
smaller screens. And it's similar in style to the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace the theme checkboxes on the settings page
so that we get a unified UI.
These switches are linked and as such can only be activated
deactivation occurs when the user selects another theme.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Move the location services switch to the GPS menu, indicate both with icon and text if the service is active or not.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Strangely, a click/tap anywhere else worked as expected, but if you hit
exactly on the checkbox, the status change wasn't propagated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In stead of using the fixed 4 column code introduced in f2fcad89b0db9b164d8fd3f89218ad27ca362bd3 use percentages of page width to allow for a more flexible layout since no block really has 4 columns.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Automatically save changes made on the settings page on completion of text fields or theme checkboxes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Put all GPS settings in one block and revert to a 2 column layout while maintaing the 4 column widh.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Addresses: #492
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Had a bit of rebase issue with this one.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
New icons for the dive management sub-menu
ttps://material.io/icons/
The icons are under Apache License Version 2.0
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add a couple of icons from the material repository.
https://material.io/icons/
The icons are under Apache License Version 2.0
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add a checkbox to the preferences page to facilitate selective visibility of the developer menu. With the coresponding function in qmlmanager.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Fixes: #490 items 1) and 2).
1) Reference to isBluetooth.leftPadding is removed as the isBooltooth
checkbox is gone.
2) Do not set background color of downloaded dives. The checkbox is used
to denote "selected or not".
In addition, incorrect references to subsurfaceTheme.PrimaryColor (which
does not exist) are replaced by the correct subsurfaceTheme.primaryColor.
Finally, an obvious copy/paste error width: childrenRect.height. that
is supposed to be width: childrenRect.width.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit adds the capability to cancel a running download from DC.
The actual cancel is fully handled in the underlying libdivecomputer
code. As the user may be interested in the dives downloaded up to
the moment of cancel, do not just close the download screen (as
it was before this commit). Now, the <quit> button changes to
<cancel> when the download is started, and pressing cancel, only
cancels the download and does not close the download screen, but
presents the so far downloaded data. When no download is running,
the <quit> button just quits the screen as before.
Fixes: #485
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trucate the logfile on open to remove any data from previous sessions.
This confused me very much, as the new logfile started from the
top, leaving old data on the bottom.
Also added system date for easy reference.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The connection already clearly defines whether this is Bluetooth or not.
No reason for the separate checkbox.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I wonder if we even need this anymore at all as the connection
clearly determines whether this is a BT download or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we can't find a match, just leave it unchanged. This way, if we
mis-recognize a device, the user can correct the product (or even
vendor) without losing the correct connection.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add styling to the GPS fixes page.
The background color of the swipe list objects is wrong and also the icon overlay. This is a Kirigami issue.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The built in theme in Kirigami has special variables for sertain objects, this sets the correct color for each object to match our themes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
THe editable textboxes rely on the material theme to set the correct colors. This sets the appropriate colors for each theme.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Email addresses are checked for a someone useful pattern, passwords are
letters, numbers, and +-_. only. Reject anything else.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This hides the text for the map it button if ther are no coordinates for a dive. Needed as for the dark theme the map it text was still visible.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This adds the right handle icon that is needed for the swipe list items not to report an error when activated.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Right now we need to restart Subsurface-mobile in order to detect
Bluetooth devices - so simply turning on BT after Subsurface-mobile was
started is not sufficient.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit only has the actual changes, the next commit will clean up
the white space in order to make it more obvious what was done.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The trick is to pick a path that is accessible from other applications.
In theory QStandardPaths::GenericDataLocation should provide that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These buttons only work when we successfully downloaded a dive. Also, don't
show a list of dives when there are no dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To be shared between C/C++ and QML code in order to show the updates
and potential error messages from libdivecomputer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Latest Kirigami master allows us to turn off reachability mode. In
general this had been rather confusing to our users and it seems to
somewhat conflict with the pull down to refresh of the dive list.
Latest Kirigami also changes the behavior of refresh slightly, you now
need to pull "down" for at least 500ms before it triggers. So, with this
change and the latest Kirigami, hopefully the user experience for
refresh is good enough that we can consider keeping it enabled and use
it as an equivalent to manual sync (even in offline mode).
See #454
See #456
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fast flicking to the top of the divelist triggers almost certainly a
pull down sync, as the default boundBehavior is DragAndOvershootBounds.
Despite being the default QML action, this leads to unwanted pull
down syncs (even in offline mode).
Setting the boundBehavior to DragOverBounds solves this issue. Now,
the user has to explicitly drag the top down to force a pull down
sync, and a accidental fast flick is stopped at the upper bound.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Now that we support this for many dive computers, that seem reasonable.
I'm not happy with the icon, but couldn't figure out a better one in the
breeze icon set.
See #426
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now just do an indeterminate busy indicator - we can get more fancy
and use the libdivecomputer progress event, later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Restyle construction of toast message and enable translation for it.
Further, removed newline characters as they break the lines at
non-logical positions.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Let's have names for the colors in each theme and assign those
named values to the theme colors when switching themes. This
way other pages can access the colors that are not in the current
theme (for example for a theme switcher).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is based on code from Marco Martin from the Kirigami Android
sample app. In order to simplify the QML code the QMLManager function is
there for all OSs, but it's a no-op on anything but Android.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the user can scroll up the page to see all of the notes without
having them covered by the action button.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Occasionally I see errors in the log where we would access modelData.dive
with modelData = null. This patch addresses a couple of the spaces where
this happens, but also simplifies the code by using the existing alias.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't great, yet, but a first step to show that this is possible
(and in doing so I found quite a few spots where the colors weren't
correctly propagating, yet).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By making the assignments to the Kirigami Theme colors Qt bindings
things get correctly updated when switching.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we have distinct colors for trip header and selected dive, this
is actually counter productive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the accent color much lighter, don't have a solid bar on the left
for dives that are part of a trip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implementing another suggestion from Davide. A button to get the map
(as well as just tapping on the location name).
Fixes#431
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the grid layout and replace it with code that is derived from the delegate
that we use in the dive list. In order to look proportional I ended up using a
larger font for the location and therefore decided to allow that text to wrap
instead of forcing single line.
This implements a good chunk of another one of Davide's great
suggestions.
See #431
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes fairly redundant text (yes, we know those are the Dive Details) and
makes the label for the Notes consistent with all the other labels.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Davide points out that this is not a commonly understood way in an app
to indicate that a text is also a link. So let's just remove that (but
tapping on the location will still work to get you to the map if there
is GPS information available).
See #431
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows that we are, indeed, using Roboto on Android. Which means I
can close the first of Davide's design issues:
Fixes#427
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to make it easier to see the changes, the code hasn't been re-indented.
This will be in the next commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way it will render in the same font as the location of a dive.
This will look like crap until the next commit adds a rectangle with
color around it, but this way it's much easier to see the individual
changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Based on Davide's ideas, but with a few tweaks:
I really like the dive number on the far right; that gives a clean
consistent look. I tried it with date on the left and depth/duration in
the middle and liked the result.
This doesn't change the font, just addresses the layout and bold heading
vs smaller sub-heading.
See #427
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Translate all of them, but also remove some redundant or possibly
misleading messages. These are now seen by users, not just developers
trying to debug the code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have unified the debug output to the console and to the App Log, let's
use it consistently everywhere.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old system of cloud access updates with fake percentages just wasn't
helpful. Even worse, it hid a lot important information from the user.
This should be more useful (but it will require that we localize the
messages sent from the git progress notifications and make them more
'user ready').
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you start a new session with Download from DC, clear out the table
from the last attempt before adding the page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Major functional change in this commit is the addition of found static BT devices
to the internal administration (on Android), in a way that is equivalent to
mobile-on-desktop. So, in both cases, the list of devices in the app are
as in the list of devices on the host OS (Linux or Android). To minimize code
duplication, the btDeviceDiscovered slot is split in two parts, the part to
act as slot for the Qt BT discovery agent (Linux, so mobile-on-desktop), and
the part only needed for Android.
Remaining to be fixed: the correct handling of the QML UI selection of
vendor/product. The first default dive computer is correctly detected,
all paired devices from the virtual vendow can be selected, but clicking
through vendors results in non logical selections. It is obvious why
this is, but a fix is not straigforward at this point.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a central function to convert a BT name to a vendor/product pair
known to Subsurface. This allows interfacing from a paired BT dive
computer, without actively selecting its type, but by selecting it
from the list of paired BT devices. So, after this, downloading from
multiple (paired) DCs is also possible.
And not the niced piece of code ...
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a list of paired BT devices for the "Paired BT Devices" vendor. The
devices under this vendor represent all BT devces that can be found
from the local BT interface. Some special processing is required, as
the BT provided data is (obviously) missing the specific data needed
to open a BT device using libdc code. This processing is not in
this commit, but will follow. This commit is preparation for that.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
One Andorid JNI include was missing. And removed the unused ones
from QMLManager.
[Dirk Hohndel: I had added the missing include elsewhere, so this commit
now only has the removal of the unused includes]
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the recent refactoring of QMLManager to btdiscovery, the
manager.getBtAddress() got superseeded by
downloadThread.data().getDetectedDeviceAddress(). Corrected this
here.
Futher some debug output is modified, so that it report the proper
function names.
This corrects the download from an automatically detected OSTC 3.
Manul selection of the same device from the fake vendor "Paired
BT Devices" does not work, however. Still work to be done in
that area.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons unknown to me, the DCDeviceData instance was freed way too early,
and used afterwards, obviously resulting in a SIGSEGV. This commit creates
the DCDeviceData as a direct child of the QMLManager instance, ensuring
it does not get freed prematurely.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't be part of the UI (qmlmanager), but part of our
overall handling of dive computers and BT devices.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
appendTextToLog prepends the elapsed time which can be useful, so let's
not remove that but instead have it log to qDebug() instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
all qDebug / qCDebug and friends now will be properly
logged into developer -> log, on QML.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML and C++ model don't interact too much, a new Rule
should be created and used on the QML
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a list of paired BT devices to the QMLManager class. In addition,
a very simple implementation is made of getting the paired BT devices on
Linux, so that we can test further processing of selecting the proper
devices, in a mobile-on-desktop situation.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It is very impolite to force BT on at start of the mobile app. We cannot
know if the user is going to import dives over BT.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As Qt is not able to pull the pairing data from a device, a lengthy
discovery process is needed to see what devices are paired. On
https://forum.qt.io/topic/46075/solved-bluetooth-list-paired-devices
user s.frings74 does, however, present a solution to this using JNI.
Currently, this code is taken "as is".
Currently, only for Android (so not mobile-on-desktop, or even desktop).
And only generating logging data in the logcat.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The naming scheme of OSTC dive computers doesn't match their product names,
but they all behave the same from a download perspective, so we assume that
any BT device that has a name starting with OSTC is an OSTC 3.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We remember the offered service uuids as we detect the device and then
try the first one - likely this needs to be fixed / tuned to pick the
right one if multiple uuids are offered.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we detected a BT dive computer, we can already set up the vendor and
product for it (as well as the new BT checkbox).
Oddly, in my tests this doesn't set up the product correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we find something that looks like a known BT dive computer, set
things up so that we can use it later. If multiple dive computers are
found, simply use the first.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A delegate to display the dives in a better way,
based on the code from DiveList.qml
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far all this does is list all the BT devices that it finds
(and I worry if this will have negative battery implications
on a mobile device), but this should allow us to connect to
a standard BT dive computer (but that will of course require
more code to pick the right device).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This already takes into account which of those dives were selected.
Right now all we have is select all or none - this needs actual support
in the UI, but once that's there, it will just work (famous last words).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still to do:
- select the dives to save
- record the downloaded dives
but download is already working. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For this I had to also make the DCDeviceData accessible,
and for that it needed to be a pointer.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a new action on the drawer to display the
Download from Dive Computer options. Nothing works yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once we re-inserted the dive in the list we aren't done, quite the
contrary - we now need to make sure that we handle any other changes
and mark the dive list as updated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to set the timeSpec after the QDateTime was parsed,
otherwise it gets converted to localtime again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trying to close the non-existing context drawer caused the function
to abort (and consequently not to delete the dive).
Fixes#309
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was an extra BasicListItem inside the SwipeListItem.
This commit just removes 5 lines, the rest is indentation change.
Fixes#312
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already have that for the other three fields where we offer auto
completion (buddy, divemaster, suit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Prior to Qt Quick Components 2.1 there was no onPressed signal for a
TextField; in order to be able to build against Qt 5.7 (which comes with
Qt Quick Components 2.0) we need to work around the lack of this signal.
This code seems to do a pretty good job at simulating it.
My attempt in commit 73c66e1d7d ("QML UI: make run with Qt 5.7 again")
didn't work so well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Assigning actions in an imperative way on component complete,
seems to cause a crash on some devices, assign declaratively
the whole list instead, hiding the gps related actions on
iOS as they are not supported on that platform.
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a different take that seems to deal much better with different
width and font size combinations.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The editText property is not there anymore, we need text
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to make sure we don't render the initial profiles with the
wrong scale on devices, we need to seed the device pixel ratio with the
device default and then update it once the window has been created.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the device pixel ratio can be a fraction we should interpolate the
values. I still don't really understand why this is necessary, so this is
a hack on top of a hack - but for most values I tried this does seem to
give us a reasonably well placed (and well scaled) profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes scrolling of the cloud credentials and simplifies code
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Completely adapt to the api changes of OverlaySheet in Kirigami2
in order to achieve the same look and behavior for the dive
edits that had with kirigami1
Port most components to QtQuickContrls2, except comboboxes
in the dive edit sheet that will need a new control type
Signed-off-by: Marco Martin <notmart@gmail.com>
For CCR dives we want to display the setpoint and pO2 information,
due to the limited screensize we have to remove the temperature graph or
the view will be to cluttered.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Sending nicely readable formatted coordinates to Google Maps does not
result in a correctly positioned map. Google likes unreadable
decimal format.
Little hacky solution. Added a gps_decimal attribute, populate that
with the standard function for format a coordinate to string, but
reset the preferences value temporarly so that it always converts it
to decimal style.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This fix seems to fix the enumerate problem: the problem that on a
seemingly non-determinstic way, all the profiles get enumerated
and rendered, causing freeze of the app, or even crash due
to out of memory.
Only 3 lines of code change, but this fix did not come easy. The
enumerate problem seems some kind of race condition between QML,
Kiragami and most definitely, the Subsurface QML code itself.
The breakthrough in my debugging was the setting of
highlightRangeMode: ListView.StrictlyEnforceRange based on
the QML documentation on snapMode: enumeration.
This fix deserves proper testing in multiple environments. As
could be seen on the developpers mailing list, I was (easily)
able to reproduce the enumerate problem, but Rick was not. So
I definitely do not claim to understand why this fix solves
the issue for me.
And as a sidenote: fixes#263 for me as well.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It's unclear why this code was added in the first place - removing it
makes the highlight of the selected dive in the dive list work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were doing the right thing switching from metric to imperial, but in
order to swtich back you had to restart. Now it works both ways.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
There is no need to have two variables for the same purpose.
[Dirk Hohndel: changed to keep the two separate functions as otherwise
we no longer parse existing repos successfully]
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows the user to enter multiple buddies as a comma separated list,
the "Multiple Buddies" entry is still a special case as we can only populate
the combobox with a single name for each entry.
fixes#168
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The JS string function search returns the position of the string you
search for and -1 if that string isn't found. Also, search allows
regular expression, indexOf does just a string match. So let's use
that as it is much faster.
See issue #168
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"Multiple Buddies" is magic in that it means "do not change the buddies
set for this dive". Allowing the user to edit that magic phrase defeats
the purpose.
This deals with part of issue #168 - but of course that magic phrase
shouldn't be fixed as English text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing adive in Subsurface-mobile we can only handle one buddy
due to the limitations of the combobox. To prevent loss of data when editing
a dive with more than one buddy we display "Multiple Buddies" in the buddy
field. This creates a special case where no changes are written to the buddy field
unless the user changes buddy for that dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the option to select a cylinder when adding or editing a dive.
Due to limited screen size we restrict the editing to the first cylinder only.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now kirigami needs to be built with a C++ plugin.
In cases of mobile operating systems such as iOS (and in a lesser measuse,
Android) having a proper plugin loaded at runtime may be difficult, so
statically link it together with all of its qml files compiled as a
qresource inside the static library.
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface uses "local time" which in particular means we never
display time zone information to the user. The user (and our file
format) only sees times like 5pm or 17:00. A better name than
local time (which could mean "local at the dive spot) would
be "watch time", the time displayed by the diver's watch when
she entered the water.
Internally, we store times as time_t, seconds since Jan 1 1970 0:00
UTC. Our convention for conversion between 5pm and time_t as always
been to treat 5pm as if it were UTC.
Then confusion arose since Qt's QDateTime (which is tied to UI elements
like QTimeEdit and similar) is time zone aware and by default assumes
the system time zone. So when we set a QDateTime to 5pm and then later
convert it to time_t we have to take care about the difference between
UTC and the system time zone.
This patch unifies our solution to this problem: With it, we set all
QDateTime's time zone to UTC. This means we don't have to correct for
a time zone anymore when converting to time_t (note, however, the
signedness issue: Qt's idea of time_t is broken since it assumes it
to be unsigned thus not allowing for dates before 1970. Better use the
millisecont variants).
We only need to be careful about time zones when using the current time.
With this convention, when assigning the current time to a QDateTime, we
need to shift for the time zone since its value in UTC should actually be
the watch time of the user who is most likely used to the system time zone.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
since the contentItem is the default property of
ScrollablePage, putting another Item after it will change
contentItem with that one, in this case the Label
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we run the backend to verify credentials without waiting for it to
finish, the redirect might happen before we know if the credentials are
invalid, unverified or verified - which will cause us to give the wrong
information to the user.
Yes, this additional wait is annoying, but I can't come up with a better
way to do this and avoid incorrect information. At least the UI isn't hung
while we wait.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a column of whitespace in the divelist that looked strange.
It was there so a trash can icon can appear. Now the trashcan overlaps
with the item.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sets the list models for autocompleting suit, buddy and
divemaster.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to get autocomplete to work on manual dive add
we apparently need a separate init function.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hide the handles for the comboboxes, making the text input fields
look like the normal text fields.
This is left as a separate patch as there currently seems to be issues with autocomplete
on Android.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds autocompleting text input fields for suit, buddy and
divemaster.
[Dirk Hohndel: some whitespace cleanup]
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Splitting the bottomlayout in two leads to columns in the grid not lining up.
It was a workaround that hopefully isn't needed any longer.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QML manual advises against setting width property of gridLayout children
directly, and recommends setting preferred, min and/or max width instead,
letting QML do the work to determine the optimum width. But we've found
letting QML determine gridLayout widths leads to infinite loops in too many
situations, so we're forcing a width. It's better to force a width by setting
it directly, rather than setting minimum = maximum.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I did this semi-automatically: I used the script from
the previous patch and then did some manual corrections.
This marks only title: and text: tags, there might be others
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The ApplicationWindow has the backRequested signal and if we don't accept
that event, Kirigami will exit the app which is never what we want.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this seemed to work fine on iOS and when compiling the QML UI on
a desktop, on Android the nocloud button wasn't shown at app start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The grid layout had each column fixed to a width
taken as a portion of the grid width, but since
the grid has a columnSpacing defined as well,
the computation doesn't add up, helping in causing
an infinite recursion problem in the attempt of
sizing and positioning all the children of the layout
[Dirk Hohndel: heavily modified, but the basic idea remains]
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
if the text in every column can wrap anywhre,
we don't have a stable way to know how large the columns
themselves may be. This can cause an infinite recursion
while trying to figure out the width of the items, as
the sizeHint(Qt::ImplicitSize) of those labels
(Buddy, Cylinder etc) will not be stable as it will once
return the size of the text wrapped and once the size of
the text not wrapped.
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the big layout causes an infinite recursion in the Qt/QML layout
engine.
Also remove a no longer accurate comment.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With offline the default now, we need to force a connection at least once
so that the repos are in sync. And then of course we need to return to the
correct state, regardless on whether this connection succeeded or failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since saving checks if there are changes, we have to always mark the dive
list as changed before asking for the changes to be saved.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is rather simplistic, it just imports the local data into the remote
repository and therefore loses the git history of the local data - but I
wasn't able to make the git merge without shared base commit work, so I
went this much easier to implement route instead.
One thing we need to be careful about is that contacting the remote server
could fail. If we don't manage to merge the dives from cloud server and
local storage, we need to revery to no cloud status in order not to lose
the local data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* add new file AbstractApplicationHeader.qml to the qrc
* add new file AbstractApplicationWindow.qml to the qrc
* use new api for custom ApplicationHeader
header: Kirigami.ApplicationHeader {
minimumHeight: 0
preferredHeight: Kirigami.Units.gridUnit * (Qt.platform.os == "ios" ? 2 : 1)
maximumHeight: Kirigami.Units.gridUnit * 2
}
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we are in no cloud mode
- allow adding dives via the menu
- enabling / disabling automatic sync makes no sense.
- if the user wants to manually sync the cloud, they need to first enter
credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Given that currently we don't deal well with not having a git repository
that is linked to cloud storage, don't allow people to add dives unless
there are verified cloud credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to a change in Kirigami on most tablets even in landscape mode we are
only showing one column. Because of this I missed the fact that I had
broken multi column support by mistake. Without setting the width of the
dive list it expands all the way and prevents the showing of two pages
next to each other.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
put the margins only around the fullscreen delegate of the listview,
making the listview go all trough the screen edges.
This because the cutted effect when the list view is half scrolled
looks quite ugly. Making the ListView reach the borders
also moves the scroll indicator at the screen edge
where it conventionally is.
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes sure that if the user switches to offline mode they don't get
incorrect notifications that tell them that they are accessing cloud
storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you switch back to the dive list by swiping horizontally you stay in
edit/add mode and then can't select a dive on the dive list. This way you
have to discard or save the edit, first.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The TextButton was what we used for actions very early on, and the TopBar
has now been replaced by the Kirigami header bar.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 50ebdd020e3c of the Kirigami project the syntax with which
actions are added to pages has changed. This commit tracks that, adds the
new file that was added in Kirigami and also removes the now obsolete
context menus (since we have a working back button on iOS now)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there is no GPS source or if permission to use it was denied, don't
offer to run the GPS service or to detect the current location when
adding or editing dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This exposes a locationServiceAvailable property to QML and keeps it in
sync with the corresponding state in the GpsLocation widget.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I couldn't figure out how to break this down into small, useful commits.
Part of the problem is that I kept going while working on this and as you
can see from looking at the commit, diff tries so hard to find small code
fragments that moved around, that the diff overall becomes quite
unreadable and it seemed impossible to recreate the sequence of steps
after the fact.
It all started with adding the parsing for the GPS coordinates. But while
testing that code I found several issues with the rest of the function.
Most importantly it seemed ridiculous that we carefully tried to match the
texts that the DiveObjectHelper would create for the various fields,
instead of just using the DiveObjectHelper to do just that. And once I had
converted that I once again realized just how long and hard to understand
that function was getting and decided to break out some of the more
complex parts into their own helper functions.
But of course all this didn't happen in this logical, structured, ordered
way. Instead I did all of these things at the same time, testing,
rearranging, etc.
So in the end I went with one BIG commit that does all of this in one fell
swoop.
This adds four helper functions to deal with start time/date, duration,
location and gps coordinates, and depth of the dive.
To avoid mistakes when dealing with the GPS coordinates, there's another
helper to encapsulate the creation of the dive site and we switched to a
current GPS location.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were several logical flaws here. Ugh.
Don't save things if there are no unsaved changes, if we haven't
initialized this repository from the cloud or if we are already saving
things.
Then, once we decide that we should save, first always save to the local
cache and then check if we should save to the cloud and do so if
requested.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's not discard our GPS location when editing site name on mobile.
Fixes#1051
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 339411cca69b in Kirigami master tries to reparent the OverlaySheet
to the page that it is related to. Unfortunately the heuristic used there
to find the right object assumes that every page has a contentItem
property, which our DiveDetails page doesn't have.
As a hack to work around this issue (until this is fixed upstream in
Kirigami) we simply create such a property. This commit should be
reverted once Kirigami upstream has been fixed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The manager can now directly update the index of the selected dive, and
the UI tells the manager the timestamp of the currently selected dive.
This allows the manager to pick the best possible dive as selected dive
if things change (for example if the dive list gets reloaded because it
changed in cloud storage).
Fixes#1009
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the automatic sync is turned off we could be stuck in a state where we
always thought that we were already in the middle of a save.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before it had the next dive still selected.
Fixes#1053
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Android we can save locally right away, but we don't want to make the user
wait for a network sync. Sadly, on Android currently the saving in the
background doesn't work and the save will run when the user comes back.
Definitely not ideal.
On iOS the situation is different - a save to the local git cache takes
surprisingly long. Must be the shitty file system they use or something.
Because of that we only mark the dive list changed and instead save the next
time the app is not in the foreground (which works on iOS but not on Android -
go figure).
On all the other OSs (I guess that would be desktop builds of
Subsurface-mobile? But there may be other mobile OSs that people might want to
build it on) we save both locally and to the cloud right away.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So when the user taps on the manual cloud sync, we always force access to
the cloud server. Otherwise we only access the cloud server if
git_local_only isn't set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the border and make them look more like labels. This adds a
StyledTextField for that purpose. And while we are at it, we can make that
StyledTextField a little prettier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the code much cleaner and easier to understand and should allow
us to then switch back to doing at least the local save right after we make
any changes to the data.
This commit also tries to make sure that the accessingCloud status stays
correct and consistent throughout all the various success and error paths.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user is on the credentials page, doesn't change the credentials
but simply taps on save, they now get back to the dive list.
Fixes#1047
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We first check the sha to see if we want to load at all. But at that
point we already have the repository and the branch and we have synced
with the remote. So when we decide that we need to reload from storage,
we don't need to repeat those steps, instead we can go directly to the
git load.
For that to work we need to pass the repository pointer and the branch
name back to the caller so that we can directly call git_load_dives().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We first want to save any exiting unsaved changes to the local repository
(and ONLY to the local repository). After that we want to make sure that
we are syncing remotely, fetch the remote and then (possibly after a
merge) push the changes to the remote. In the end we reset the previous
"local git only" preference which we overwrote for this manual forced
sync.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had a redundant check of the server reply hidden in there, and the
logic which values were set where didn't really make much sense. This
seems clearer to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of the time we are adding all the dives, so do this in a single model
operation. This makes the case when adding a single dive (in the undo delete
function) slightly more complicated, but that seems totally worth it for the
speedup in the common case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fonts on my Nexus 6p are way too big (especially when compared
to the fonts of the same build on an iPhone 6plus that has very
similar screen size). Simply trying to get more data...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface-mobile is the name of the app, but not a good title for
the Dive list / Cloud credential page
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>