We need to execute the same sequence of steps both when starting the app
and when switching cloud credentials. This way things will work correctly
when the device is offline and the user wants to switch accounts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Even setting things up in the first row isn't enough. Every field in the
grid needs an explicit width. How dumb is that.
To make this more manageable calculate the correct widths at the beginning
and then just reference those properties.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order for wrapping to work, the Text and TextEdit elements need to have
a defined width. Normally the GridLayout is supposed to be able to figure
out optimal widths for the different colums if you tell it which ones
should stretch, but that has repeatedly caused infinite loops and crashes
in the layout engine.
For now, in order to get both wrapping (and therefore no clipping of the
content) and avoid crashes, we hard code the width of the four columns by
setting Layout.maxWidth for each element in the first row of the grid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's put the three likely rather narrow items above each other in the
right column and the others (especially the three that could run long:
suit, buddy, dive master) in the left one.
Also, make the individual entries more consistent in which attributes are
set in which order - easier to read.
Finally, make sure that all grid elements enable wrapping.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since this variable is specific to the cloud credentials in use, we need
to reset it when we change credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It makes no sense to only do this the very first time we connect to a
cloud storage account. The existing code only happened to work because we
incorrectly tried to maintain the loadFromCloud status across restarts of
the application. So one bug hid another bug.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What matters is that the cloud storage for a specific email address has
successfully been synced - and we need to remember this across restarts of
the app. This way Subsurface-mobile can work with different accounts, even
if offline.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This requires mobile components that include commit 03c868fc57e5 from
earlier today. With this a single press on the back key cancels the edit
and a second press on the back key brings you up one level in the page
stack (usually back to the dive list).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we currently only have preferences that affect the GPS
functionality, it might be more logical to have the preferences under
GPS menu.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Warning M126: == and != may perform type coercion, use === or !== to avoid it
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds a back button in edit mode, and an edit button for view mode.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I finally was able to reproduce the crashes with the infinite recursion when
computing a GridLayout.
This seems to be triggered by competing Layout.fillWidth settings that the
layout engine couldn't figure out how to accomodate.
I did three things to make this work better:
- explicitly grab the columnWidth for the width of the DiveDetailsView.
- split the GridLayout in two so the area above and below the profile are no
longer forced to fit in the same column widths.
- remove most of the Layout.fillWidth settings and only leave a couple that
seem sufficient to get reasonable on screen layout in my experiments.
Here's hoping that this one is finally resolved.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were creating a couple dozen objects that we never needed and because
of that triggered several dozen callbacks whenever the model data changed.
All for UI elements of the profile that are either not used in the mobile
app (like the calculated ceiling or the partial pressure / tissue
saturation graphs), or are only useful when using the profile
interactively (which we also don't do on mobile).
I don't know if this will make a significant impact on performance, but it
seems like the right thing to do either way.
A positive side effect is that the odd blue line on top of the rendered
profile is gone as well.
Fixes#1007
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should fix the problem when using the back key to exit the edit page.
Requires a patch to the mobile components that isn't upstream, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do not not want to do decompress model calculations in the mobile app
(see 130f4cd7ac), but we do want to see the divecomputer reported
ceiling (in red). The latter is fixed here.
Ticket #1006
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But only if there is only one weight system defined in the dive. Otherwise
display a read only text that explains that this cannot be edited.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Create space for sillybutton at bottom of screen
2) Reformat columns in tableview
3) General cleanup and simplification of code.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we detect a redundant DC we free the memory reserved for the model.
Thus we need to malloc that memory here.
Fixes#1002
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently, when running the packaging/android/build.sh from a source
tree that has been used for desktop builds, libdivecomputer wants a
make distclean. This is inconvinient, and is caused by building
libdivecomputer in source. Now, configure and build libdivecomputer
in a new subdirectory, allowing to run the android build script
from the same source tree as the desktop (both desktop and mobile)
builds.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No reasons not to upgrade to the latest OpenSSL lib. The currently used
1.0.1 branch is ending end of 2016, so a switch to 1.0.2 is useful
anyway.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 1030cb265a 'QML UI DiveDetailsView: shift
dive number to right of top row' was reverted because it caused mysterious
crashes for some testers, inferred to be related to sizing items in a
gridLayout.
This patch brings the dive number back up to the right of the top row, so the
page width doesn't exceed the screen width. Using text wrapping should prevent
the date text and dive number items from increasing in width, and hopefully
avoids the mysterious crashes.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to mark CCR dives by having "SP change" event at time 0:00.
As we nowadays mark CCR dives by setting dc->divemode appropriately,
better to convert the old dives to this format as well. This way we do
not have to take the special old format into account on multiple places
in the source.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This attempts to detect the time format when initially importing a CSV
file. Well, only the minutes:seconds notation is detected currently.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to detect the date format when initially reading a CSV file
for importing.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's possible that this will create an out of order dive list, but it
seems the most consistent way to do things and to avoid more than one dive
with the same dive number (which could have happened if you add several
dives manually that are not the newest dives in the dive list).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding a dive is just like editing it, except that canceling the operation
has different consequences. Instead of trying to figure this out by some
inference on other state, let's just make it explicit and then clean up
after ourselves if the user canceled a manual dive add.
This also switches to use the properties that we defined in order for the
main menu to be able to setup these values. Makes the code easier to read
and is more consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I tried various things to do this from QML but it just doesn't seem to
work at all. So I gave up and instead added a trivial helper function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I couldn't make sense of either the code nor the comment, so I tried what
broke when I removed it. Nothing that I could find. So maybe we don't need
this after all?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of passing magic values around, calculate the columnWidth as part
of the SubsurfaceTheme object.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By giving them a fake profile we can actually edit the dive profile in the
desktop app.
Fixes#998Fixes#1000
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
