These were used to remove warning-icons to mark tabs with user
changes. However these icons haven't been set since commit
a86aca0378.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to test whether the "really discard changes?"
message should be shown. However, we now edit weightsystems
directly with undo commands. Therefore, the check is unnecessary
and the whole function can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the show_unused_cylinders flag is not set, the cylinder tables
in the equipment tab and the planner should not show unused cylinders.
However, the code in CylindersModel is fundamentally broken if the
unused cylinders are not at the end of the list: The correct number
of cylinders is shown, but not the correct cylinders.
Therefore, add a higher-level CylindersModelFiltered model on top
of CylindersModel that does the actual filtering. Some calls are
routed through to the base model (notably those that take indexes,
as these have to be mapped), for some calls the caller has to get
access to the source model first. We might want to adjust this.
For filtering, reuse the already existing show_cylinder function
and export it via CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We tend to use lower-case filenames. Let's do it for these files
as well. Simple search & replace.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While technically the initial value of this variable makes no difference as
it is set when the first dive is displayed, technically Coverity is correct.
Fixes CID 353273
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were two cases that were handled incorrectly:
- if the user hasn't entered a salinity, obviously there shouldn't be a warning
- if this is a manually entered dive, there is no salinity downloaded from a
dive computer, so equally, no warning
Suggested-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to show this whenever the value in the dive (which could have been
entered by the user some other time) doesn't correspond to the value in the DC.
This, btw, will point out to the user if different DCs have different values.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were royally confused when we didn't know the salinity value (e.g., if the
dive computer didn't provide that information). We somehow treated this as the
same as wanting to use the salinity information in the dive computer. Which
makes no sense.
While cleaning this up, this also adds the textual representations of the water
types as a string list that corresponds to the enum values that we use - this
way it's easier to stay consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added code for string translation.
Added code to improve UI on Windows.
Added some comments to make the code more understandable.
Enable salinity combobox for manually entered dives
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user may modify the salinity by selecting a water type from the combobox.
The new datum does not replace the existing salinity value but is stored in a
separate variable within the dive structure. If the dc-based salinity is
overwritten, there is an exclamation mark next to the modified salinity value
to indicate that the salinity has been overwritten. The dc-derived salinity can
always be recovered by selecting the "use dc" option in the combobox.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since changes to the weight model are not modal anymore, nobody
queries the changed-flag. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the EditWeight undo command. Since there is common code
(storage of the old weight), this creates a common base class for
RemoveWeight and EditWeight. The model calls directly into the undo
command, which is somewhat unfortunate as it feels like a layering
violation. It's the easy thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more complicated than weight adding, because the
multiple-dive case is not well defined. If multiple dives are selected,
this implementation will search for weights that are identical to the
weight deleted in the currently shown dive. The position of the weight
in the list is ignored.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When connecting a model to the TableModel class, it would connect
clicking on an item to the remove() slot of the model.
This breaks the program flow implied by the undo code:
Ui --> Undo-Command --> Model --> UI
Moreover, the naming of the remove() slot is illogical, because
clicks can also have different effects, as for example in the
cylinder-table.
Therefore, move the connect() call from TableModel to the
callers. In the case of TabDiveSite, move the remove() function
from the model to the TabWidget, where it makes more sense.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce an AddWeight undo command. This is modelled after the
numerous dive-edit undo commands. The redo and undo actions are
connected to the WeightModel via two new signals, weightAdded
and weightRemoved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The WeightModel always acted on the displayed dive. To support undo
of weightsystem changes, operate on an arbitrary dive. This is
in line with other models, where the updateDive() function resets
the model to represent a certain dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When accepting changes, the main tab refreshes the display in
a remember/restoreSelection() pair. Since the display refresh
doesn't lose selection, these calls can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For deterministic construction/destruction (i.e. objects are
destructed in reverse order of construction) it is crucial that
constructor initializer lists follow the order of the class
definition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently, undo of dive-replanning was introduced. Therefore,
it appears logical to do the same thing for editing of the
profile of manually added dives.
For now, use the same undo-command, just change the displayed
text from "replan dive" to "edit profile". Move the fixup dive
call into the undo-command.
Eventually, every action on the profile should be made undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Connect the UI to the underlying dive structure. Enable proper initialisation
and management of star widgets while Information tab is active. Enable undo for
the addtional star widgets.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement the UI features related to the additonal star widgets.
Create the additonal star widgets and connect them to the preferences settings.
By default only the current and visibility widgets are shown. In this case the
current widget is on the left hand side of the tab. If the additional widgets
are enabled the horizontal order of the widegts are changed to reflect
attributes roughly from the start of the dive on the left to those towards the
end of the dive on the right.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Split out the actual filtering from the MultiFilterSortModel.
Create a DiveFilter class that does the actual filtering.
Currently, mobile and desktop have their own version of this
class, though ultimately we may want to merge them.
The idea here is that the trip-model and undo-commands have
direct access to the filter-function and thus can take care
of keeping track of the number of shown dives, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove modification of style sheet for "Dive mode" box in info tab.
This fixes a broken UI layout under Windows.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Three minor changes in tab widget UI layout and txt:
- Remove leading space in string "Gas name"
- Remove duplicate <item> entry
- Correct "leftMargin" and "rightMargin" to 0 everywhere
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the future we might want to use undo-commands for mobile as
well (even if not implementing undo).
Therefore, move the undo-command source from desktop-widgets
to their own commands top-level folder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the information tab, presenting atmospheric pressure is a bit
unintuitive because the diver cannot easily relate that to altitude.
For the Atm. Pressure widget in the Information tab this code does:
If the atmospheric pressure for a dive exists and the user selects
the 'm' or 'ft' option from the combobox, then the estimated altitude
is shown in the text box.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Currently the top righthand part of the notes tab is used for
showing and editing air teperature and water temperature. But
these fields were moved over to the Information tab and are not
required in the Notes tab any more. Rather use this space for the
depth and duration data for manually-entered dives. Currently
extra vertical space is created in the Notes tab for showing this
field, resulting in inefficient use of screen space and
inelegant layout. This code moves the Duration and Depth fields
into the top righthand of the Notes tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The undo stack is preserved.
This is in preparation of removing temperatures from the Notes tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
1) Reorganise the existing widgets in the Information tab
2) Move divemode widget and visibility widget from Notes tab to
Information tab
3) Translate water density to a word indicating water type
4) Reorganise the Notes tab to compensate for the moving the
divemode and visibility widgets to the Information tab
5) Remove the problems in showing a QGroupBox in Qt Windows. I do
this by removing the CSS specifying border characteristics
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tab was crashing if there were no cylinders because
1) per_cylinder_mean_depth() would access non-existing cylinders.
2) TabDiveInformation::updateProfile() would access a non-existing
mean.
Fix both of these crash conditions by checking whether the dive
actually has cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When keeping track of cylinder related data, the code was using
static arrays of MAX_CYLINDERS length. If we want to use dynamically
sized cylinder arrays, these have to be dynamically allocated.
In C++ code, this is trivial: simply replace the C-style arrays
by std::vector<>. Don't use QVector, as no reference counting or
COW semantics are needed here. These are purely local and unshared
arrays.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_gas_used() returns the volume of used gases. Currently,
an array with MAX_CYLINDERS is passed in. If we want to make the
number of cylinders dynamic, the function must use an arbitrarilly
sized array.
Therefore, return a dynamically allocated array and free it
in the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ProfileWidget2::recalcCeiling() function is used in one place,
namely when an undo-command changes the mode. It recalculates
decompression data and repaints the ceilings and thus avoids a
full profile-redraw.
This is smart, but it becomes problematic when the dive is changed
and the ceiling is recalculated before the profile is redrawn.
The DivePlotDataModel then still has data from the previous dive
but cylinders of the new dive are accessed.
This kind of situation may arise if multiple dive fields are
updated, as for example when replanning a dive.
Currently, this only causes a temporary mis-calculation. When
removing MAX_CYLINDERS this will lead to crashes.
One might attempt to fix the whole data-dependency mess. This
commit goes the cheap route and simply redraws the profile when
the mode is changed. Yes, it is in a way ineffective, but we
do worse things. The ProfileWidget2::recalcCeiling() thus becomes
unused and is removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The native buffer of a membuffer is not NUL-terminated, so when you want
to detach it and use it as a C string, you had to first do
'mb_cstring()' that adds the proper termination/
This was all documented in the header files, and all but two users did
it correctly.
But there were those two users, and the exported interface was
unnecessarily hard to use. We do want the "just detach the raw buffer"
internally in the membuffer code, but let's not make the exported
interface be that hard to use.
So this switches the exported interface to be 'detach_cstring()', which
does that 'mb_cstring()' for you, and avoids the possibility that you'd
use a non-terminated memory buffer as a C string.
The old 'detach_buffer()' is now purely the internal membuffer
implementation, and not used by others.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The profile repainting code that was called when a dive changed was
located in a separate function. Not only did it take a redundant
parameter, it also performed very weird stuff like entering and
exiting plan state. That did not work at all. Replace by a simple
call to plotDive() and things work much better.
There was a comment about DivePlannerPointsModel and profile
getting out of sync. So let's keep an eye out for that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The divesEdited signal sends the changed field as a parameter.
Since some undo-commands change multiple fields, this led to
numerous signals for a single command. This in turn would lead
to multiple profile-reloads and statistic recalculations.
Therefore, turn the enum into a bitfield. For simplicity,
provide a constructor that takes classical flags and turns
them into the bitfield. This is necessary because C-style
named initialization is only supported on C++20 onward!
Is this somewhat overengineered? Yes, maybe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On undo/redo, the dive statistics tab was not updated even
if a selected dive was changed. Fix that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo system sets updates individual dive fields on
redo respectively undo. Make salinity such a field, since
it is changed on replanning a dive.
To do this, break out the "update salinity" functionality
into its own function, add an entry to the DiveField enum
and add the corresponding switch-case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
