If we accept a change on the dive site management screen, it needs to be
reflected on the Dive notes tab right away.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems to make sense to only have them on the dive site screen. For the
main UI they were redundant (we have the map) and not all that useful. The
only time people would want them is if they wanted to manually add GPS
coordinates for a dive, but that should now be done via the dive site UI.
There are a couple of FIXMEs in the code and a few code blocks that have
been commented out as they will be needed in one form or another once this
GPS handling is done on the dive site UI, which right now it is NOT.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the start of the preparations to edit the dive site,
passing a uuid so we can retrieve it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clicking on the 'Manage' button now brings you to the widget to manage it.
Nothing has been added on it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will be used to set the 'default' state. The other
two possible states right now are plan and add; those will
be created right next.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing to a CCR dive, add a setpoint change to the default setpoint
at the beginning of the dive. Otherwise add an explicit setpoint change to 0
.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu 14.04 the edit mode does not exit successfully when applying
the changes. It instead jumps back to edit mode (even though hiding the
option to apply/discard changes again). So let's just have a flag to
prevent faulty behavior.
Fixes#786
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way any extra data probided by the dive computer is visible to the
user (without other processing). This data cannot be edited by the user as
it reflects the information given by the dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While in a multi dive edit we want to apply our usual semantics (only edit
things that are the same as in the current dive), when doing an explicit
copy and paste that doesn't seem to make sense. So we manually override
that behavior.
Fixes#753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pre-existing tissue load going into a dive can change if the start
time of a dive changes. Therefore we need to recalculate the ceiling when
editing start time (or date) of a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should correctly set all the values and puts us in edit mode.
Testing so far looks good for both single dive and multiple dives selected
(i.e., you can paste into multiple dives).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Select the picture, press delete, profit.
[Dirk Hohndel: removed the stray hunk that snuck into this patch]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reusing the displayed_dive for this caused all kind of odd problems that
were hard to reproduce, because the behavior depended on what was in the
corresponding fields of the current_dive. Worse: the GPS location handling
prevented us from reliably removing the location of a trip.
The solution isn't ideal and certainly isn't elegant. Maybe we simply
shouldn't reuse the widget here. But I think what I have now works - I
tried hard to make it break again and couldn't.
Fixes#659
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Introduce on_location_editingFinished() and move the GPS coordinates
completion logic there. This simplifies acceptChanges(), but replaces
the clever code for multidive completion by something a little more
straightforward.
Note the call to on_location_editingFinished() from acceptChanges();
without it, completion only happens *after* the dive has been saved.
[Dirk Hohndel: trivial merge, minor changes for consistency]
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Very good patch, lots of removed lines. :)
Only try to add the tags when user accepts, discards the
test to see if the tags were changed or not, delete the
old list and copy the new one always.
only bug that's appearing now: taglist is still empty after save
we need to reselect the dive to make it appear, fixing that
on the next patch.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this patch a simple click into the main tab does not start editing
mode. Only once a value is modified do we show the message box and disable
the other widgets.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of comparing the dive structures (which doesn't work since the
strings are actually copies), track if the user made changes.
Cylinders and weights still need to be compared as they are handled in
different widgets.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of passing in a divenr of -1 to make it clear things this changes
things to use an options "clear" flag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is massive confusion about what we display when and where and which
dive structure (or pointer to a dive structure) contains which information
at which stage. This is the first step towards restructuring all of this.
This creates a global variable displayed_dive which at any point in time
should be what is displayed on screen (both in the profile and in the
maintab). It removes the editedDive concept from MainTab.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The maintab was connecting with an invalid slot on the
new date widget, QDateTime instead of QDate
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Too much noise on the headers, this commit remove uneeded
headers when they are uneeded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the new date widget still needs a bit of work, but the
design is working already.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also seems intuitive. What's odd is that in the Planner you get a
confirmation dialog while here you don't. We should be consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Small changes in the model to display the pictures of the dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code took an odd approach. It tried to change all selected
dives whenever the user edited a field, and kept all this backup data in
case the user rejected the edits.
This code takes the opposite approach. Only edit a copy of the selected
dive and then when the user accepts it, edit all the dives and when the
user rejects the edit simply redraw the screen (as all the "real" data is
still unchanged).
This not only saves quite a bit of code, it should be much easier to get
correct.
Admitedly this code will need quite a bit more testing to make sure it
works as intended, but as far as I can tell it already gets more scenarios
right than the previous implementation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a signal to MainTab, that should be removed from there
when we finish the rework on the edit part, to go to the edit classes,
but in the meantime, let's keep it there.
The signal is connected to the ProfileWidget in a way that the end of the
edit will also trigger the profile to go back to ProfileState (show the
dive, if there's any) or empty Profile (if there's none).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the last key that went in ended a tag and the next key is a tab -
deliver that to the TabWidget instead so we can navigate between input
fields.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Last time I touched this I got a scream from dirk, but then I
looked at the code again and the problem that I faced was that
I broke translations in a sad way, well, now I broke it again.
However, this method shouldn't belong to MainTab ( because of
that thingy that I said before and also many others: Separate
the logic of your application from the UI specific code )
This generates a string that's going to be used on the Interface,
it doesn't display it on the interface. Move it down below makes
it easier to test ( I don't need to create an Widget and worry
about the parent-relationship with the mainwindow just to test
this function, for instance. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I cannot figure out how to get the hemisphere letters translated correctly
in qthelper.cpp. Short term hack for now - someone who understands how
this is supposed to work really needs to take a look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As a warining for the user mark the field red.
If the user inputs invalid input that will be ignored
while parsing.
But with adding a one character error margin to prevent it from toggling
between Red and Yellow while editing existing values, for example "After
Deleting unit and last number after '.'"
Signed-off-by: Yousef Hamza <jo.adam.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently the feature to show temperature units while adding dive is
provided through checkbox in preferences->units section. This patch
disables this checkbox and always enables this feature.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently when user wants to add a new dive information,
the ways to know what unit system is being used are
- Through preferences panel.
- Save the dive information, which displays units in
the text field.
This patch provides an option to the user to show current
unit system by displaying the unit on the side of the label
when the user is editing the fields.
This feature can be enabled or disabled by using the new
checkbox option i.e. `Show units in text labels` included
in `preferences->units` section.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* ensure include guard to every header
* comment endif guard block
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This doesn't change storage format. Instead it parses buddy strings and
converts them to string list which is supplied to tags widget.
This feature was requested in ticket #311
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
An addition to the "Move dive notes edit message above the
scrollable widget" commit: Make sure the save/cancel message is
always displayed on top, regardless of which tab is selected.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes it possible to hide some columns on the Cylinders
Equipment pane. The 'remove' and 'type' are impossible to hide,
since they are the most important ones for a non-tech diver.
Fixes#281
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we are editing or adding a dive, the globe widget needs to act
differently. Instead of directly changing the lat/lon of selected dives,
it needs populate the coordinate text field as if this information was
entered by the user (effectively all it is is a way to more conveniently
enter coordinates).
As a side effect, this also allows us to change the location once it has
been added (you just need to go into dive edit mode to do so).
There is one weird issue that occasionally (and I can't quite reproduce
this) I get lat/lon very close to 0/0 (as if the globe widget was centered
on 0/0 and not on whatever it is actually showing). That still needs to be
addressed.
Fixes#239Fixes#131
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
