1) Put table of contents as a column on the left-hand side of the page
instead of as part of the user manual text.
2) Correct a some typoss.
3) Add three sentences to the Bluetooth download section to deal with
Bluetooth Pass Codes.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a list, not a string. Treating it as a string creates all kinds of
exciting weird errors that make no sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we ship it all in one piece there is no reason to use a static
libdivecomputer (like there is on Linux). This allows us to give the user
a different libdivecomputer.dll for testing when tracking down a bug.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to fix our issues with being able to create zip files on the
fly (needed for the divelogs.de access).
Fixes#955
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We may want to hide the error text in a release build and replace it with
something more user friendly but then again, the next time this fails on
us at least our users can report more than "doesn't work"...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When downloading from libdivecomputer, we used to initialize the depth
of a sample to the previous depth. However, at least for the Suunto EON
Steel, you can get sample times without any actual depth reading - the
time might be associated with some ranbdom event rather than a new depth
sample.
Rather than initialize these samples to have the same depth as the
previous one (and then perhaps getting a very sudden jump when the
*real* depth event comes in a second later), initialize the depth
samples to -1, and if that sample doesn't get a real depth, we'll create
an interpolated depth.
It is possible that we should just carry the sample around as not
actually having a depth, and instead just interpolate in the plot_info
generation, but at least right now we have a ton of code that "knows"
that every sample has a depth. Not the least of which is our own save
format.
So generating an interpolated depth seems the path of least resistance,
and at least makes the graph look correct - no odd staircase effect from
other events that happen in between depth samples.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 31d1d1f421 ("Don't change pen color when for zero SAC") Robert
continues to use the last SAC color (which certainly was better than
switching to dark green for "extremely low SAC rate"). But I think it
makes even more sense to mark it as neutral - so I picked a gray.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the Mac doesn't create an "activated" signal when hitting
enter/return on the drop down. So we simply manually send this and now you can
select the site with enter/return just like on Linux or Windows.
Fixes#953
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As we join LOCATION with SITE on divelogs.de import using slash (/) as a
separator, we might as well split on last slash on export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When for individual plot entries the SAC is zero this comes
from gas changes and the SAC calculation needing a bit more
pressure data and not from the diver switching to freediving
mode. So we shold not change the pen color on the pressure
line for that but pretend we are still breathing at the
previous SAC.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
There was tons wrong with the code. You can't just average the SAC rate
over different plot entries, since they may not be the same duration.
And it got the beginning and end conditions wrong etc etc.
This should at least get much closer. And it's structured to be a lot
more understandable, I hope, even if the math is a bit more involved (ie
doing the proper time-pressure integration etc). It may still have
bugs, but at least it now gets the right coloration at the beginning of
a dive, and just eye-balling the slope vs color it seems to do the right
thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
One specific string did not translate. First, Dirk and I (via IRC)
suspected a leading space was the issue (see commit eccac1321f).
However, I found out that the problem was still there. A non translated
string "%1 shown", when applying a filter on the divelist, and looking at
a trip line. It shows always untranslated "%1 shown". Extracting
to-be-translated strings from the code, I found 2 errors: Class
<classname> lacks Q_OBJECT macro.
This patch adds a missing tr() definition and implementation to 2 structs.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes a broken translation in the divelist introduced in commit 45b1d0d73d.
Now, the (.. dives) string on a trip line in de divelist is translated (again).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently, it can happen that the default cylinder is not set
even though same_string(prefs.default_cylinder, "") is false.
Then we fall back to the 11.1l air cylinder.
This should silence a warnign about "Too many gases".
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Admittedly, imperial tank sizes are a bit weird.
But it must have taken some effort to break things as creatievly as Suunto did.
The UI allows only multiples of 100psi and multiples of 10cuft. Which shows
that the developers have no idea what typical imperial tanks look like. AL72?
AL63? HP tanks at 3440psi? LP+ at 2640psi?
Yeah, I get it - you had no idea, someone showed you an AL80 and you made silly
assumptions.
But even then, what the heck are you storing in your data, dear Suunto? The
pressures are off by the very logical factor of 1.00069182389937. And then
regardless whether I use the wrong pressure or the corrected pressure, the wet
sizes are too small by a non-constant factor.
So this code takes the junk that libdivecomputer truthfully passes through from
the Suunto parser and tries to convert it into something that matches what the
user most likely entered in the EON Steel UI. Ugly. Stupid. But it seems to
work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding { } to if clause to avoid dangling warning
/Users/guidolerch/src/subsurface/qt-models/cylindermodel.cpp:117:
warning: add explicit braces to avoid dangling else [-Wdangling-else]
[Dirk Hohndel: combined two of Guido's patches to one that is simpler]
Signed-off-by: Guido Lerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just fixes an annoying warning that freediving wasn't covered in the
switch statement.
Signed-off-by: Guido Lerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixing a bug preventing to download files on Ubuntu.
On Ubuntu some files are recognized as DIR and not as regular files.
This is a fix that works but most lilely does not address
the root cause which would need an expert to look at..
Signed-off-by: Guido Lerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Updated packages required to build on Fedora
[Dirk Hohndel: dropped part already fixed earler]
Signed-off-by: Steve Williams <stevewilliams@internode.on.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
void DivePlannerPointsModel::setupCylinders() in diveplannermodel.cpp
handles setting up cylinders for the planner. If there is a current
dive, cylinders form that dive are copied. Otherwise the default
cylinder is added and lacking that a standard size cylinder.
If the current dive does not have any cylinders, we could end up
without cylinders. This patch adds a test for this case and delegates
to the other two sources of a cylinder in that case.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there is only one gasmix in the list we should show the icon that tells the
user that they can't remove the last gasmix from the list.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Delete duplicate or unused images in Documentation/images directory
2) Add text to describe user manual viewer functionality
3) Add image to explain 2) above
4) Add text to explanation of TTS toolbar button (Thank you very much, Davide!)
5) Update image showing display of TTS toolbar button
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
whitespace.pl can now do a better job (although surely
still not 100% perfect job) of formatting constructor
member initialization lists according to the rules
described in the current CodingStyle file.
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The use of ForEachMacros is working as expected when
used with clang-format version 3.5.0-10.
Also add ConstructorInitializerIndentWidth: 8, which
slightly helps with ctor style, but still does not
enforce the full subsurface ctor guidelines.
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No changes were made to the values of the entries.
Sorting makes it easier for a clang-format n00b to
compare each setting to its documentation on the
http://clang.llvm.org/docs/ClangFormatStyleOptions.html
web page.
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This includes my attempts to address the issues raised by the translation
checker script.
It also fixes the crash with the planner on Windows which was caused by
a faulty translation that replaced a '%' with a '$' in the format string.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This script can be called on translations files, e.g.
> scripts/checktranslation.pl translations/*ts
and will report if the number of % signs in source and translation
differ.
It finds quite a few issues that need to be investigated.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Many time stats in maintab display also seconds in short freediving
Signed-off-by: Giorgio Marzano <marzano.giorgio@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
![](https://secure.gravatar.com/avatar/e81491093d5916411bcadfadabe61852?d=identicon&s=56 "K. \\"pestophagous\\" Heller"){kind=small}
