For reasons I still don't understand, sometimes (but not always) when
clicking on a trip header we appear to get a select notification for the
trip and at the same time deselect notifications for every dive in the
trip. This seems wrong but I can't seem to figure out why it happens -
and of course it causes us to have a mixed up interpretation of what is
selected in our internal selection tracking.
Simply acting on the new selection after the newly deselected items are
handled appears to fix the issue, but I do worry about this change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixed the show / hide dialog shortcuts to take the splitter into consideration,
So, here's the deal.
We have a few QSplitters that takes care of helping us with the
size of a few widgets, they are ok, and we should continue using them
to manage the visibility of them too. But the way that we did before was to
widget->hide(); something, and if you hided something using the splitter,
by holding it's handle and collapsing the widget, then you used the 'ctrl+number'
shortcut to show it, it whould only show a gray panel.
This patch makes everything behave using the splitters.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
For consistency I didn't change the meaning of Ctrl-1/2/3/4 and added
this as Ctrl-5 - but one could just as easily make the argument that
"ViewGlobe" should be Ctrl-4 and "ViewAll" should be Ctrl-5.
This ensures that only one of the four widgets is shown in the
individual modes, but it doesn't address the drawing issues with the
profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do a force-plot on showEvent because the user can
have asked to open a dive file via command line, so
the app needs to open already with a profile plotted.
if the user opens the program, loads a map, hides
the profile by hitting ctrl + 1, then shows the
profile again by hitting ctrl + 2, we do not want
to do all the math to show the profile again, because
we already have it in memory.
this also fixes dirk's strange behavior of funky profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Implements the divelist to behave like linus explained,
essentially, it filters the layoutChanges of the model,
greps for trips, and for each trip that it finds, it set
the 'firstColumnSpanned' property, to make the column
to have the size of the whole table. e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Showing all gases (except air) as (o2/he) feels a bit odd, most people
would only use the two gas notation if they are actually diving trimix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The title of the form to download dives from a computer was
simply "Form".
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Visibility is defined in meters in UDDF and we use scale up to 5 stars.
Thus the meters are scaled to our star rating using one-size-fits all
method.
< 1m => 1 star
<= 3m => 2 star
<= 5m => 3 star
<= 10m => 4 star
> 10m => 5 star
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a simple TextEditor in the graph for the 'Dive Plan' mode,
this text editor is very simple, so the user can double click on
'depth' or 'duration' to set the depth or duration of the dive.
Since this was a test, only 'duration' was done, and I'll add
duration on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'Plan' mode and a 'Dive' mode on the profile. Those modes
tell the application what can be done: Plan - the dive's dinamyc and
can be changed, 'Dive', the dive is fixed ( most probably downloaded
from a dive computer and it's readonly. ) - now I need to properly
populate stuff.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch adds a dive from the menu, it's the dive that will
be used to add a new dive plan. so, I also removed the option
'add imput plan' from the menu.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Reimplement the movement of the tooltip by hand,
we were adding / removing childs of the tooltip
quite often, wich broke the movement of the item
using the default behavior, aparently Qt uses
a cache of the transformation of the item, assuming
that the bounding box of it will not get modified
while dragging. wich in our particular case, is
a falacy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ticket 127 mention that context menu is fixed on imperial mode, which is
partial true. Context menu only not have the changes on header model updated
when preferences are chenges during execution. Hard to note because if
program is closed and opened again, the context is initialized properly.
Since actions aren't bound to the header model, we need iteract of current
items and change the title.
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
We need to close the dialog after applying what was downloaded, and we
should not try to delete the manager in case of cancel (as that reliably
causes the SIGSEGV.
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds information on cylinders and gas changes and some other basic
stuff like buddy, dive site, weights.
Visibility should probably be ignored as UDDF specifies it as meters and
we have a scale of 0-5. But currently it is copied as is to the
visibility field in Subsurface.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ok, so this sounds insane, but it fixes our currently broken sorting
of dive trips vs plain dives not in trips.
The reason for that is simple: the dive trips are sorted by date, but
that's column #0, and for plain dives is the dive number.
So currently the trip-vs-dive sorting looks at the date of the trip,
and compares that to the number of the dive. Since the date of the
trip is expressed as seconds-since-1970-in-UTC, unsurprisingly the
dive number is generally much smaller (even for some very avid divers
;), and so the plain dives end up sorting way at the bottom (or at the
top, if you do "oldest trips first"
Since the dive number *should* sort as the date, this stupid attached
patch just makes us return the dive date instead.
Now, there are other possible solutions to this:
- make the date of the dive be column 0, and make the dive number be column 1.
Quite frankly, while more logical for this particular problem, it
probably sucks as a solution. We do want to have a column we can sort
dives by that is date-based, but doesn't include trips. And while the
dive number *should* sort identically to the date one, the fact is
that you can have dives without any numbering, so it doesn't.
In contrast, all dives have dates, and sorting numbered dives by
date should still result in sane behavior (and if it doesn't, then the
insanity comes from the dive numbering, and odd sorting is the fault
of the user and indicative of a problem)
- We could possibly do something magical like sorting dives by number
when they are inside trips, or when no trips exist at all. But then
we'd sort by date when there are trips and the dive is outside the
trip. But quite frankly, that just sounds insane.
So on the whole, I don't love this patch, but it seems to be the least
confusing of the possibilities.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a typedef to the QFlags<QItemSelectionModel::SelectionFlag>.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit c4f06dc536 introduced Document
Mode on the MainTab QTabWidget. This doesn't look good on MacOSX.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This implements limited support for importing dives from a Palm divelog
software called aquadivelog. Basic depth graph is imported but most of
the metadata is currently discarded.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the map selection works like normal selections do. Except we
don't do "ranged" selections (shift-click) for fairly obvious reasons.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Proper hide/show tooltip under ProfileGraphicsView. Events are not
properly handled and no custom tolltip status was stored.
Text are properly hidden now when tooltip is collapsed.
Reported-by: Tomaz Canabrava
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Last open dives directory is stored in settings, so no need to walk through all
subdirectories all the time.
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
This code removes the dive computer clicking on the trash icon,
the result is not saved on the XML, this will need a bit of
hacking from some of the older guys. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The GTK version seems to be bugged on this, since the dialog
doesn't save the dive computer nickname that I setted, but
the Qt version shows less dive-computers than the GTK one on the
same dive. I want somebody to do a quick review of my code too. :)
I also plan to remove the 'OK' and 'Cancel' buttom, they seem to
be overrated on this dialog - fairly uneeded.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a new dialog, Edit Divecomputer, it will currently only lists
the divecomputers that are used on the xml file. I used the same method
that the gtk version used, but only 2 divecomputers got visualized in the
dirk dive data. I'll assume that it's correct and will fix it in the next
couple of commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I guess we should support de-selecting dives this way too, but right now
the interfaces only do selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 4b405caa2c ("Clean up divelist dive selection") made the sort
model variable in headerClicked unused, so get rid of it. Fix a speling
eror closeby while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hoocked up the apply button - Didn't tested ( as I frankly don't know
what the expected result should be. ). but the app is not crashing, yey.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The XML is now being correctly parsed, Clicking on Help
will open the browser pointing to the api site, and clicking
on cancel will cancel the download.
Clicking on Apply still doesn't apply, but that's next. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added initial support for download dive info from subsurface web service,
the current code only downloads and output the xml downloaded in the debug
area. Now I need to parse things up and plug the unplugged stuff.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Don't call refreshDisplay() after preferences change. This strangely
somehow leads to a situation where I need to move the mouse over the dive
list before changes to the units are reflected.
When calling reload() do not force layout change / resort unless that is
the intention.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Getting closer to the way this should work. Adjusted the call to reload
to not switch back to tree view and resort (oops).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems that this is the way this is supposed to be done - instead of
manually looking at what kind of click we get, Qt decides when to create
a context menu for us - this way things like the Windows Menu button
will work automagically.
As an example I also implemented the "remove dive from trip"
functionality, which exposes some other bugs (like the fact that the
dive that isn't part of a trip ends up being sorted at the very end of
the dive list).
This commit contains a "testSlot" implementation to remind me how to
figure out which dive / trip we are on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some users might want to really see nothing but trips, others might want
to be able to keep the trip with the selected dive open.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
