For historic reasons, there where three distinct signals concerning
dive-selection from the undo-machinery:
1) divesSelected: sent newly selected dives
2) currentDiveChanged: sent if the current dive changed
3) selectionChanged: sent at the end of a command if either the selection
or the current dive changed
Since now the undo-commands do a full reset of the selection, merge these
three signals into a single signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some commands tried to retain the current selection on undo/redo,
others set the selection to the modified dives.
The latter was introduced because it was easier in some cases, but
it is probably more user-friendly because the user gets feedback
on the change.
Therefore, unify to always select the affected dives on undo()/redo().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the default view is batched by trips, signals were sent trip-wise.
This seemed like a good idea at first, but when more and more parts used
these signals, it became a burden. Therefore push the batching to the
part of the code where it is needed: the trip view.
The divesAdded and divesDeleted are not yet converted, because these
are combined with trip addition/deletion. This should also be detangled,
but not now.
Since the dive-lists were sorted in the processByTrip function, the
dive-list model now does its own sorting. This will have to be
audited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In signals dives were sorted by date. This criterion is not be unique.
Therefore sort by the dive_less_than() function of the core to avoid
any inconsistencies between the Qt-models and the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a different field is edited, hide any old multi-dive-edit
warning message. The reason is that we might want to add an "undo"
button to the message. But this will undo the wrong command if
we don't hide the message.
Sadly, this means that we can't use animated show / hide, because
an animatedHide() followed immediately by an animatedShow() does
not necessarily show the message. In other words, and animatedShow()
does not interupt a started animatedHide()!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Information tab shows the atmospheric pressure. Make this value editable
and also ensure that changes to it are undo-able.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
This is copying the dive editing code. It uses an OO design with
virtual functions for getting and setting the values. It doesn't
use templates though, as both fields of strig type. This feels
a bit over-engineered, but it is 1) consistent with the dive edit
code and 2) the number / types of dive trip fields might increase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When pasting (or undoing paste) the cylinders or weights may change.
Send the appropriate signals and update the models accordingly.
Currently, this means copying from current dive to displayed dive,
but hopefully we can get rid of "displayed_dive" in the not so
distant future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive list was not updated automatically when an edit command was
executed. There was already a signal to do that, viz. divesChanged().
But that signal worked by-trip and didn't have a dive-field specifier.
The edit-commands used the divesEdited() signal that isn't by-trip
but has a dive-field specifier.
Unify these two signals to be by-trip and with dive-field specifier.
This needs common code to generate the by-trip list that is moved to
a command_private.h header.
Since there might now be multiple signals (one per trip) actually
check in the main-tab whether the current trip is affected to
avoid multiple update of fields. This has the positive(?) effect
of not doing any update if the current dive isn't changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was a bit different from the other editing commands:
1) Only the current dive is edited not all selected dives.
Therefore, create a function that turns the current dive
into a one-element list.
2) The profile has to be replot. Here, likewise, create a
function to do that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more tricky. There are two modes: set dive site
and set newly created dive site. This is realized using an OO model
with derived classed. Quite convoluted - but it seems to work.
Moreover, editing a dive site is not simply setting a value,
but the list of dives in a dive site has to be kept up to date.
Finally, we have to inform the dive site list of the changed
number of dives. Therefore add a new signal diveSiteDivesChanged.
To send only one signal per dive site, hook into the undo() and
redo() functions and call the functions of the base class there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To keep the UI in a consistent state, update the notes field if
it is changed by an undo command. To that purpose, add a new
signal to diveListNotifier with a list of dives and a field-id
as payload.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement an undo command that edits the name of a dive site.
Connect it to the dive site table, so that names can be edited
directly in the table.
Send signals on undo / redo so that the dive site table and
the dive site edit widget can be updated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce two DiveListNotifier signals which are sent by
the undo commands if dives are added to / removed from the
core.
The signal has the dive site and the index in the global
dive site table as payload. Thus, the model has only to
remove the appropriate rows.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new signal to DiveListNotifier. Send signal if dives are
added or removed and therefore the dive count of a dive site
changes. The dive sites are collected and the signal is sent
at the end of the command.
Add code to update the table view.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a dive site table to each dive site to keep track of dives
that have been added to a dive site. Add two functions to add
dives to / remove dives from dive sites.
Since dive sites now contain a dive table, the order of includes
had to be changed: "divesite.h" now includes "dive.h" and not
vice-versa. This caused some include churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
printGPSCoords() returned a newly allocated C-style string. Most
callers simply made a QString out of it and freed the C-style string.
This is paradoxical, as printGPSCoords internally works with QStrings
and converts them to C-style on return.
Therefore, let printGPSCoords() return a QString and create a
printGPSCoordsC() wrapper for the two C-callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The printGPSCoords() function returns a copied C-style string. Since
the owndership is transferred to the caller, the correct return type
is "char *" instead of "const char *".
Thus a number of casts when calling free can be removed.
Moreover a number of callers didn't free the string and thus were
leaking memory. Fix them. Ultimately we might want two versions
of the function: one for QString, one for C-style strings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
EMPTY_DIVE_STRING used to be a string-literal representing missing
information ("--"). In 6985c123d4 it
was replaced by the actual empty string. Using a literal to represent
the empty string seems a bit pointless, therefore remove it completely.
Notably:
QString(EMPTY_DIVE_STRING) -> QString()
if (temp.isEmpty()) temp = EMPTY_DIVE_STRING; -> noop
if (s == EMPTY_DIVE_STRING) -> if (s.isEmpty())
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QML's ListView uses the "section" property to test if items belong to the
same section. Apparently, this must be a string and therefore we can't
pass e.g. a dive-trip object. Therefore a specially formatted string
was passed in, which was guaranteed to be unique (contained the dive-trip
pointer value) and the fully formatted trip-title and short-date.
The disadvantage of that approach is that the formatting is performed for
every dive and not every trip. Perhaps not a problem now, but it makes
it for example necessary to cache the number of filtered dives.
To be more flexible, pass in only the pointer value formatted as
hexadecimal string and provide a function to convert that string
back to a trip-pointer (in the form of a QVariant, so that it can
be passed to QML). Moreover provide two functions for formatting the
title and the short-date.
The three new functions are members of DiveListSortModel. This might not
be the perfect place, but it is easy to reach from the DiveListView.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveObjectHelper::trip() function was
1) Misnamed: it returned the *location* of the trip
2) Not used outside of DiveObjectHelper
Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The when field gives the time of the first dive. Instead of keeping
this field in sync, replace it by a function that determines the time
of the first dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dives of each trip were kept in a list. Replace this by a
struct dive_table. This will make it significantly easier to
keep the dives of a trip in sorted state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a stray semi-colon on the beginning of a line in
DiveObjectHelper.cpp. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Now that struct dive_site * is a proper Q_METATYPE it is not
necessary anymore to pass dive-sites as opaque uintptr_t types.
Simply pass a QVariants or directly via dive_site *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MapWidgetHelper::reloadMapLocations() used an array of uuids to
add dive sites to the map only once. Replace this by an array
of pointers. This is a small piece of a larger effort to remove
dive site UUIDs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace UUIDs by pointers to dive-site in mobile code. In both
cases, the value is transported via a QVariant. The function
getCoordinatesForUUID(), which was only used from mobile, can
be replaced by a getCoordinatesFor() function taking a variant
supposed to contain a dive-site pointer. Likewise, the variant
of the centerOnDiveSite function is now supposed to wrap a
pointer-to-divesite.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When creating a trip header (as it is used in the mobile app right now), we need
to show the number of dives shown, not the total number of dives in that trip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This feels a bit like cheating, but if we need to be able to make modifications
to the underlying dive and only have the helper object (for example inside of a
view model), doing everything through the helper object can turn into a real
performance issue.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise we could match the end of one string and the beginning of the next,
so having a buddy name Linus and a dive master named Alvin would be matched
by USA.
Also add Notes to the full text search (I had forgotten those earlier).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Select the proper dives after the add, remove, split and merge
dives commands on undo *and* redo. Generally, select the added
dives. For undo of add, remember the pre-addition selection.
For redo of remove, select the closest dive to the first removed
dive.
The biggest part of the commit is the signal-interface between
the dive commands and the dive-list model and dive-list view.
This is done in two steps:
1) To the DiveTripModel in batches of trips. The dive trip model
transforms the dives into indices.
2) To the DiveListView. The DiveListView has to translate the
DiveTripModel indexes to actual indexes via its QSortFilterProxy-
model.
For code-reuse, derive all divelist-changing commands from a new base-class,
which has a flag that describes whether the divelist changed. The helper
functions which add and remove dives are made members of the base class and
set the flag is a selected dive is added or removed.
To properly detect when the current dive was deleted it
became necessary to turn the current dive from an index
to a pointer, because indices are not stable.
Unfortunately, in some cases an index was expected and these
places now have to transform the dive into an index. These
should be converted in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DiveListView, we have a very fundamental problem: When
On the one hand, we get informed of user-selection in the
DiveListView::selectionChanged() slot. This has to set the
correct flags in the C-backend.
On the other hand, sometimes we have to set the selection
programatically, e.g. when selecting a trip. This is done
by calling QItemSelectionModel::select().
But: this will *also* call into the above slot, in which
we can't tell whether it was a user interaction or an
internal call. This can lead to either infinite loops or
very inefficient behavior, because the current dive
is set numerous times.
The current code is aware of that and disconnects the
corresponding signal. This is scary, as these signals are
set internally by the model and view. Replace this
by a global "command executing" flag in DiveListNotifier.
The flag is set using a "marker" class, which resets the flag
once it goes out of scope (cf. RAII pattern).
In DiveListView, only process a selection if the flag is not
set. Otherwise simply call the QTreeView base class, to reflect
the new selection in the UI.
To have a common point for notifications of selection changes,
add such a signal to DiveListNotifier. This signal will be
used by the DiveListView as well as the Command-objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Previously, each dive-list modifying function would lead to a
full model reset. Instead, implement proper Qt-model semantics
using beginInsertRows()/endInsertRows(), beginRemoveRows()/
endRemoveRows(), dataChange().
To do so, a DiveListNotifer singleton is generatated, which
broadcasts all changes to the dive-list. Signals are sent by
the commands and received by the DiveTripModel. Signals are
batched by dive-trip. This seems to be an adequate compromise
for the two kinds of list-views (tree and list). In the common
usecase mostly dives of a single trip are affected.
Thus, batching of dives is performed in two positions:
- At command-level to batch by trip
- In DiveTripModel to feed batches of contiguous elements
to Qt's begin*/end*-functions.
This is conceptually simple, but rather complex code. To avoid
repetition of complex loops, the batching is implemented in
templated-functions, which are passed lambda-functions, which
are called for each batch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove General from SettingsObjectWrapper and reference qPrefGeneral
update files using SettingsObjectWrapper/General to use qPrefGeneral
this activated qPrefGeneral and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove PartialPressureGas from SettingsObjectWrapper and reference qPrefPartialPressureGas
update files using SettingsObjectWrapper/PartialPressureGas to use qPrefPartialPressureGas
this activated qPrefPartialPressureGas and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Geocoding from SettingsObjectWrapper and reference qPrefFacebook
update files using SettingsObjectWrapper/Geocoding to use qPrefFacebook
this activated qPrefGeocoding and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Language from SettingsObjectWrapper and reference qPrefLanguage
update files using SettingsObjectWrapper/Language to use qPrefLanguage
this activated qPrefLanguage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove LocationService from SettingsObjectWrapper and reference qPrefLocationService
update files using SettingsObjectWrapper/LocationService to use qPrefLocationService
this activated qPrefLocationService and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove TechnicalDetails from SettingsObjectWrapper and reference qPrefTechnicalDetails
update files using SettingsObjectWrapper/TechnicalDetails to use qPrefTechnicalDetails
this activated qPrefTechnicalDetails and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove buehlmann(), setBuehlmann(bool)
buehlmann() is really planner_deco_mode == BUEHLMANN, so no need for a function
setBuehlmann is dangerous, because buehlmann is saved on disk, but not in prefs.* and thus can lead to inconsistency between bool buehlmann and planner_deco_moce.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove individual store to disk for divePlanner in SettingsObjectWrapper
The save was double effect, qPrefDivePlanner::instance()->sync(), which
was preciding already do this.
Signed-off-by: Jan Iversen <jani@apache.org>
remove UpdateManager from SettingsObjectWrapper and reference qPrefUpdateManager
update files using SettingsObjectWrapper/UpdateManager to use qPrefUpdateManager
this activated qPrefUpdateManager and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove DivePlanner from SettingsObjectWrapper and reference qPrefDivePlanner
update files using SettingsObjectWrapper/DivePlanner to use qPrefDivePlanner
this activated qPrefDivePlanner and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Units from SettingsObjectWrapper and reference qPrefUnits
update files using SettingsObjectWrapper/Units to use qPrefUnits
this activated qPrefUnits and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Proxy from SettingsObjectWrapper and reference qPrefProxy
update files using SettingsObjectWrapper/Proxy to use qPrefProxy
this activated qPrefProxy and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Extract thumbnails using ffmpeg.
Behavior is controlled by three new preferences fields:
- extract_video_thumbnails (bool): if true, thumbnails are calculated.
- extract_video_thumbnail_position (int 0..100): position in video
where thumbnail is fetched.
- ffmpeg_executable (string): path of ffmpeg executable.
If ffmpeg refuses to start, extract_video_thumbnails is set to false
to avoid unnecessary churn.
Video thumbnails are marked by an overlay.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove Facebook from SettingsObjectWrapper and reference qPrefFacebook
update files using SettingsObjectWrapper/Facebook to use qPrefFacebook
this activated qPrefFacebook and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove DiveComputer from SettingsObjectWrapper and reference qPrefDiveComputer
update files using SettingsObjectWrapper/DiveComputer to use qPrefDiveComputer
this activated qPrefDiveComputer and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove CloudStorage from SettingsObjectWrapper and reference qPrefCloudStorage
update files using SettingsObjectWrapper/CloudStorage to use qPrefCloudStorage
this activated qPrefCloudStorage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Animations from SettingsObjectWrapper and reference qPrefAnimations
update files using SettingsObjectWrapper/Animations to user qPrefAnimations
this activated qPrefAnimations
Signed-off-by: Jan Iversen <jani@apache.org>
ensure SettingsObjectWrapper load() loads all display variables.
Copy font setting code from SettingsObjectWrapper to qPrefDisplay
Signed-off-by: Jan Iversen <jani@apache.org>
Add qPrefDisplay sync to sync in SettingsObjectWrapper.
If a program part change display variables in struct preferences, they would
not be saved on disk.
Signed-off-by: Jan Iversen <jani@apache.org>
add the prepared class qPrefDisplay to SettingsObjectWrapper and thereby making it active.
As a consequence of the uniform naming standard desktop-widgets/preferences_defaults.cpp and
tests/testpreferences.cpp have been updated.
Signed-off-by: Jan Iversen <jani@apache.org>
There were two catch-all classes for translations outside of class
context. gettextFromC was used exclusively from C, but C++ used
both, gettextFromC and QObject. Some of the string were even present
in both. Therefore, unify to gettextFromC throughout the code base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
move #include prefs-macros from SettingsObjectWrapper.h to SettingsObjectWrapper.cpp
include dive.h directly (only part of prefs-macros.h used) in preference classes
Signed-off-by: Jan Iversen <jani@apache.org>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If a thumbnail and the original picture can be accessed and the
modification date of the thumbnail is before the modification date
of the picture, recalculate the thumbnail.
This causes more disk access and might give strange effects for
picture files with messed up file timestamps (i.e. lying in the
future) or messed up computer clocks (i.e. running in the past).
Therefore, add a preference option to disable the new behavior.
Default is set to enabled.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Previous taglist_get_tagstring signature/implementation did not allow
handling of cases where inputted buffer could not contain all tags.
New implementation allocates buffer based on pre-computed size allowing to
insert all tags in the returned string.
Added get_taglist_string in qthelper to handle conversion to QString
Added TestTagList with tests for taglist_get_tagstring
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The map widget on the mobile version requires that
a dive object from a model has a dive_site uuid.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Mostly replace "return (expression);" by "return expression;" and one
case of "function((parameter))" by "function(parameter)".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See e6e1473e6. Exact same commit but here for the
list of divemaster. The careful reader will spot a
small addition to the clearDetailsEdit() QML function.
Two more field are cleared.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The preferences flag cloud_background_sync used to be used heavily in
the mobile code, but is not used there anymore. Now, it is accessed
only in one place, but does not do what it actually says: If it is off,
the remote storage is not synced on save (but will be synced on next
load).
Syncing on save can also be prevented by unchecking the "Cloud online"
menu checkbox. Since the latter seems more logical and general
(support for non-cloud remote git repositories), remove the cloud_background_sync
option.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add the capability to select the location name from a list, constructed
from the known dive sites in the logbook.
Fixes: #546
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Bool is the correct choice for this option.
int was used before because it was not clear to me how and if I can use
bool in this C file.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In general, the C++-side of the preferences code consistently uses
the bool data type for boolean settings. There are five exceptions,
which use short instead:
showPo2
showPn2
showPhe
saveUserIdLocal
displayInvalidDives
This patch attempts to make the code more consistent by turning
these into bools as well.
Tests showed that writing as short and reading as bool is handled
gracefully by the Qt variant code. Therefore, an upgrade should not
cause user-visible changes to their settings.
As a bonus, two extern declarations of the set_save_userid_local()
function, which is not defined anywhere, were removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make all char * pointers in pref.h const to make it clear that these
strings are not mutable. This meant adding a number of (void *) casts
in calls to free(). Apart from being the right thing to do, this commit
makes the code more consistent, as many of the strings in pref.h were
already const.
While touching core/qthelper.cpp turn three instances of (void*) into
(void *).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Free a bunch of C-style strings before assigning newly copied strings.
One case was particularly buggy:
prefs.locale.use_system_language = copy_string(qPrintable(value));
Note that prefs.locale.use_system_language is a bool, which of course
always evaluates to true! Probably nobody noticed because a restart
is required when changing locale.
Moreover remove a few double-semicolons.
Currently, on Linux, after selecting a Bluetooth device the name of the
device is shown. On reopening the download dialog, on the other hand,
the address is shown. In the device selection dialog both are shown.
This patch changes the download dialog such that both, name and address,
are shown. The bulk of the patch introduces the name of the device in
the preferences and DCDeviceData. It has to be noted that DCDeviceData
is an encapsulation of the libdivecomputer device_data_t. Nevertheless,
the new Bluetooth-name field is, at the moment, not passed through to
libdivecomputer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
