When clicking a dive site on the map, the QML code would set
the selected dive site, but then all dives of dive sites in
the vicinity were set. But still only the clicked-on dive site
was shown.
Therefore, don't set the list of selected dive sites in QML,
but later in DiveListView::selectDives(), where we know all
the dives that were selected.
This, again, gives nasty entanglement of diverse widgets and
models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the selection the MapLocationModel was reset.
This lead to crashes on Qt-5.9 which are due to QML accessing
data that was freed during model reset. This putative Qt bug
doesn't happen on newer Qt versions. At least Qt-5.12 is known
to work.
Instead of fighting the bug, let's simply not reset the model
but send a dataChanged() for every element of the MapLocationModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Experimentation has shown that the image of a flag will
only be changed after dataChanged() if it is a simple
property. The old code had a complex QML expression and
then - for some reason - it didn't work.
To give us better control over the flags and avoid full
reloads of the map therefore introduce a model-property
pixmap name. The name depends on whether the site is
selected and if not, whether we are in divesite-edit mode.
This makes the code rather convoluted. Firstly, we have
to save whether the site is selected in the map-item.
Secondly we have to access the global map-widget, which
in turn has to go to the map-widget helper (layering
violation!).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking on a flag
1) The QML would call MapLocationModel::setSelected() with
fromClick = true
2) MapLocationModel::setSelected() would emit a signal
selectedLocationChanged()
3) MapWidgetHelper would catch that signal and do the actual
processing.
Other functions would call MapLocationModel::setSelected() with
fromClick = false, which would not emit the selectedLocationChanged()
signal.
Detangle this a bit by calling the selectedLocationChanged() function
directly from QML and remove the fromClick parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, dive site names are only updated on full reload.
Instead hook directly into the corresponding signal in the
MapLocationModel to set the name. Also to the coordinates
directly there instead of going via the MapWidgetHelper.
In the MapWidgetHelper, just center on the changed dive site.
Hook into the signal directly there and remove the slot
from the MapWidget. This makes the whole call-chain at least
one call shorter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the code to add the first selected dive site from
MapWidgetHelper::enterEditMode() to MapLocationModel::reload().
Thus, the list of sites is built only at one place. For this
it is necessary to pass a pointer to the map, so that new
dive sites can be added at the center of the map.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the dive-site-filter is active either on the dive-site-edit
page or the dive-site-list page, use that as the flag for dive-site-edit
mode. Moreover, when the filter is reset, the
MapWidgetHelper::reloadMapLocations() function is called, so we
can use that place to enter/exit edit mode.
This makes it easier to keep everything consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If multiple dives are selected, highlight all corresponding sites.
For that, replace the MapLocationModel::m_selectedDs pointer by
a QVector<>. Fill the vector in MapLocationModel::reload() and
add a isSelected() member function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The map model keeps track of the dive site positions on the
map. Therefore, it seems more logical to have the code calculating
the map position in the model, not in the helper-class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Now that struct dive_site * is a proper Q_METATYPE it is not
necessary anymore to pass dive-sites as opaque uintptr_t types.
Simply pass a QVariants or directly via dive_site *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This reverts commit 1c4a859c8d,
where the override modifiers were removed owing to the noisy
"inconsistent override modifiers" which is default-on in clang.
This warning was disabled in 77577f717f,
so we can reinstate the overrides.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit df156a56c0 replaced "virtual"
by "override" where appropriate. Unfortunately, this had the
unintended consequence of producing numerous clang warnings. If
clang finds a override-modified function in a class definition,
it warns for *all* overriden virtual functions without the override
modifier.
To solve this, go the easy route and remove all overrides. At least
it is consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This patch allows updating the location of map markers
while editing a dive site and updating the text in the
LocationInformationWidget in real-time.
Currently it is only possible to see the marker changes by
clicking 'Apply'.
The modification required the following changes:
- add the MapWidget::updateCurrentDiveSiteCoordinatesToMap() slot
and call it each time the GPS text updates
- separate the updateCurrentDiveSiteCoordinates(FromMap/ToMap) logic
by having the FromMap/ToMap suffix to method names
- make MapWidgetHelper::updateCurrentDiveSiteCoordinatesToMap()
call a new MapLocationModel::updateMapLocationCoordinates()
method, which updates selected location coordinates and the model
- add MapLocation::setCoordinateNoEmit() that does not emit
a signal when updating a coordinate
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
getRole() returns a QVariant and the cast is a small overhead.
Using these helpers will reduce the overhead.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapLocation QObject now has a QString property "name", which is
translating the dive_site->name member.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea of this flag is to be able to only to emit the
selectedLocationChanged() signal when the user clicked on the map
(fromClick == true).
MapWidgetHelper::selectedLocationChanged() listens for this signal
and only then it will select nearby dives based on a "small-cicle".
If "fromClick" is false, it's the backend or the dive list that
updated the selection and MapWidgetHelper::selectedLocationChanged()
should no be called.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
getMapLocationForUuid() accepts a UUID, searches the MapLocation table
and returns a pointer.
Make use of the new method in setSelectedUuid().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Inside the QML Map class there is a MapItemView item.
This item uses a delegate that receive a "model" property from
the MapLocationModel, but infact that's a QObject with the MapLocation
defined properties. That's how MapItemView works.
The problem here is that "model" QObject cannot be cast back
to a MapLocation as the meta data in there does not include
a MapLocation sub-class, for some reason.
Even if using propery() on that QObject to fetch data like coordinates
works, instead of storing this strange object pointer, store the
MapLocation UUID (from dive_site) which is a uint32_t.
setSelectedUuid() deals with this oddity and finds the correct
MapLocation pointer in the table and dispatches a selectedLocationChanged()
signal for it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The "uuid" property will be the one from the dive_site. At first it
will also be used to track the active marker/flag selection.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This method should be used if many markers are added at once.
It's main purpose is to reduces the number of beingInsertRows()
calls.
Make MapWidgetHelper::reloadMapLocations() use it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Instead of maintaining a seperate latitude/longitude values
in C++ and passing them to QML separatelly, pass them as a QGeoCoordinate.
This reduces the number of model "roles" and also prevents the creations
of extra objects in QML (e.g. via QtPositioning.coordinate(..)).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- add() will be used to add a MapLocation to the model with
beginInsertRows()...endInsertRows()
- clear() will be used to clear the model with beginRemoveRows()...
endRemoveRows()
NOTE: emiting dataChanged() does not seem to update the QML view for
this model so calling being<..>Rows() seems to be the "correct Qt
approach" to do this.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML Map widget requires a QAbstractListModel based model to operate
with good performance. Technically gpslistmodel.cpp can be used for that
same purpose (e.g. has GPS coordinates), but the way it updates
may complicate the Map widget integration.
Thus, a new model is created - MapLocationModel, with items of type
MapLocation, for an attempt for a clean project structure on the C++ side.
For now it only handles latitude and longitude.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
