Since the divelist is only visible if online/offline (CS_VERIFIED/CS_NOCLOUD),
there is no need to check that to enable "Add dive manually".
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Manual sync was enabled both for CS_VERIFIED (online) and CS_NOCLOUD (offline)
and then in the trigger CS_NOCLOUD lead to a login screen, potentially
confusing the user.
Only enable manual sync with verified cloud credentials.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The global drawer already has a name that can be referenced. This was adding
confusion as now both names were used in the menu structure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
rightPadding seems defined in Kirigami and the default value
causes a binding loop.
set rightPadding directly.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add "Dive planner" menu entry in GlobalDrawer/Developer
with 4 subitems one for each diveplanner pages.
Developer is chosen in order to allow interested access to
pages, without raising expectations for the normal user.
That allow a step-by-step implementation
Signed-off-by: Jan Iversen <jan@casacondor.com>
StartPage does not belong in divelist.
Remove startPage from diveList and anchor in main.
Make needed functional changes.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instanciate DiveList like all the other pages.
Move DiveList properties set in main to DiveList.qml
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
manager.finishSetup() have nothing to do with startpage/divelist,
but belong in main (seeing main as responsible for setup and window layout).
Move onCompleted functionality to main.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudUserName with PrefCloudStorage.cloud_storage_email in QML
Replace QMLPrefs.....cloudUserName with PrefCloudStorage::cloud_storage_email in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user asked to change credentials it is equivalent to a signout,
so no need to store old credentials. This simplification allows removal
of the temporary credentials in qmlPrefs.
this commits secures the user is locked in the login page, until one
of 3 things happen:
- enter verified credentials (divelist is loaded from cloud)
- select no-cloud mode (divelist is loaded from local)
- enter new credentials, PIN page shows, enter PIN or
cancel (back to enter credentials).
This is consistent even if the program is restarted.
Old version had a non consistent way:
A user enters new credentials,
sees the PIN screen,
but does not receive the email immediately,
so works with other applications (causing the mobile app to close)
Having received the email with the PiN,
the user starts mobile again,
BUT does not see the PIN screen, instead the old credentials are used.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove aliases for showPin/oldStatus and reference prefs.showPin/oldStatus directly.
showPin/oldStatus are "temporary" variables, that are not saved in settings,
so they easily be replaced
Signed-off-by: Jan Iversen <jani@apache.org>
default parameter values is not supported as this syntax was introduced
in ECMA-262 6th edition while QML only implements the fifth edition
(as of Qt 5.11).
remove default parameter and check for undefined instead.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is even easier and more obvious than copying the logs on the About page
and then manually creating an email and pasting those logs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Running Subsurface-mobile on iOS, the notification texts are sometimes very
hard to read, and in some situations the busy indicator isn't showing up at
all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the dive list is connected to the model while the model is updated
with the downloaded dives, sometimes the UI hangs completely.
Disconnecting the model and then reconnecting it does add a fairly
noticeable delay on longer dive lists, so there are tradeoffs here.
Of course the obvious solution is to make reconnecting the model
faster...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This helps tremendously when tracking down some problems. We should
never use console.log.
In the process this also updates a couple of the messages to be clearer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code was ill named - this way the busy spinner itself
becomes reusable with a reasonable set of function names.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way new fixes are actually shown when the user looks at the dive
list after applying the GPS fixes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML has ways to style icons - and we use that for the main theme color,
but it doesn't seem to work (anymore?) for the edit and save icons.
Instead of tracking down what changed there, simply switch between icons
with different foreground color, depending on theme.
All the other icons seem to work well in all three themes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching to the global tool bar this was lost, and then it turned
out to be broken and required more patches to fix.
Commented out because it doesn't work at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we'll get a working back icon on Android and also correct font
size for the (translated) Back text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML enums are a bit painful to use, so this uses poor man's emums
instead.
Basically what this changes is that a forced switch to the map doesn't
count as picking the map. That seems obviously correct, as otherwise you
could end up in a situation where a legitimate switch away from the map
is ignored.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes no sense and seems crazy. But it also seems to work,
For some reason with the current Kirigami version and Qt 5.13.1
selecting the map page makes the pageStack jump back to the previous
page right away. I cannot find what triggers this behavior.
Since I cannot fix the root cause, I am working around the bug. When we
select the map page we remember that fact and when a different page is
picked with the mapPage being the last page on the stack, we force the
page selection back to the map page. I can imagine countless ways in
which this could go horribly wrong - but right now I can't figure out a
better solution.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There doesn't appear to be a reason to pop all of the existing pages from the stack.
Just on principle, only close the drawer if it was open.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had very strange results with the current Kirigami.
Instead set the width of those pages based on our overall column width.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old calculation was clearly bogus, we'd also get zero columns here.
Instead do a correct calculation of the number of columns and make the
resulting column width a property of the rootItem so we can refer to it
elsewhere.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We get incorrect changes to a new screen width that causes us to try
draw to a much larger screen than we actually have. Ignore those
changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Different Android devices seem to have different patterns of throwing
incorrect width information at us. This seems like a really bad hack,
but for the ones I've seen so far this should give us the right width
information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the default font size is big enough to leave us fewer than 21 grid
units per row, shrink the grid unit.
In order for this to create consistent results, we need to reduce the
default column width to 21 grid units as well. And with that change, the
columnWidth property becomes obsolete.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's important to disconnect the model from the ListView, otherwise the update in a
different thread will fail.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this is the starting point of my following commits, I decided to
leave it in place to give Jan credit for the work he did on
figuring out some of the plumbing needed to get things to work]
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is no reason (any more?) to have a property defined
that basically renames the global pageStack into a local
pageView. Just cleanup.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
After the previous commits, we now have a preference that nicely
preserves the state of the UI, and we have the well known git_local_only
global, that is used to denote whether we want to use to local repo
only, or we want to interact with the online cloud as well.
This commit gets rid of the now superfluous syncToCloud logic. Instead
we simply set the git_local_only directly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Hook up the new preference to the UI. So now, an earlier choice
if automatic or manual download to the cloud is preserved in
between sessions. Strictly speaking this fixes issue 1725.
Notice that there is also a higly related syncToCloud thing
present. As factoring out that seemingly duplicate piece
of code is non-trivial, this will be done in a seperate
commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
We disabled the drawer menu button to switch between auto/manual
sync when in no cloud mode. Unfortunately, disabeling does not
give a visual cue to the user (like greyed out). Instead, just
make this button invisable in no cloud mode.
In conjunction a question. The manual sync to cloud menu item
takes you to the Cloud Credetials page in case pressed in
no cloud mode. While valid, this seems strange. This is not
changed in this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A relatively big change for such a simple page. Most relevant
changes are:
1) Do not use Kirigami.Header anymore. It appears that this header
has word wrapping on (and we cannot override that). This is
annoying on this page, as headings seems randomly be split over
2 lines, even in cases where there is more than enhough room to
display it on one line. And as the Kirigami.Header is just a
trivial wrapper of a Text field, we can simple replace it.
2) A lot of the toplevel GridLayouts had width properties set. These
are not needed (and confused my debugging code), so they are removed
withput any visual change. As a general rule, do not try to set
properties that are not needed. In general, it can only lead to
binding loops or undefined behavior.
3) Add a font size to our Theme. The step from regular to title size
was a little too big.
4) And, obviously, numerous font.pointSize lines are added to actually
resize the font.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
By manipulation the used font pointSize property, we can dynamically
scale fonts and derived UI objects. At the same time, we have
some logic to determine the default font, its size, etc, for example
depending on screen properties. The scaling of the UI (and its font)
does not need to interfere with those defaults.
However, when we want to reset the pointSize, we alter the default, so
a backup of the default is needed. Ok, not al full backup, as the only
thing we like to manipulate is the pointSize, to which we want to be
able to return.
All this leads to this commit. A basePointSize property is added, that
is initialized from the default. Due to the binding logic of the QML
engine, it is not a classic initialization, but a binding between the
2 properties. We need to break that binding explicitly, so that
the original PointSize is always preserved.
In addition, a display of the new font property is added to the
developers theme test.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It seems the documentation is incorrect - unless you explicitly set the
ApplicationWindow font to the the Application Font (just writing this
down sounds so silly...), it doesn't actually work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove developer from qmlprefs and use qPref instead
Update qml
show_developer is saved on disk, and thus remembered between starts.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to address the C++ object directy in qml, a different
registration is needed.
qmlRegisterType, registers the C++ class, allowing qml code to inherit
from it and make qml objects. This is needed for graphical elemnets
like profile and map
setContentProperty, registers the C++ object, thus allowing signals to be
catched.
Signed-off-by: Jan Iversen <jani@apache.org>
This is the first commit related to the removal of the GPS
webservice. It is nothing more then removing 2 buttons from the
menu to upload and download from the server, so technically
a trivial change.
As with the desktop application: Be very careful here as this
forces our users to use Subsurface-mobile, and a online cloud
account as that is the way to transfer GPS data from a mobile
device to the desktop.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add the UI components to let the user set the default cylinder and select
the chosen cylinder when adding a new dive.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This only works if the USB device contains enough information to do so.
We need to collect more information to understand what information we
get if those get plugged in. Maybe we'll get only the vendor and need to
leave it to the user to set the product (which we can do by passing an
index of -1 for product).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unless, of course, the user was editing or adding a dive - that would
be annoying to have interrupted (even though, of course, it's the user
plugging in the device which would trigger this in the first place).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user plugs in a device on Android we get a device string that
should allow us to figure out which dive computer was plugged in. Make
that string available to the QML UI.
Right now all we do is log it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add enum to qPref and remove elsewhere
update source core to reference qPref.
the enum cannot be in pref.h because it is to be used in qml and Q_ENUM
need the enum to be defined as part of the class
Signed-off-by: Jan Iversen <jani@apache.org>
The asynchronous load seemed to be (at least one of) the culprit(s) of
the banner occasionally not showing up.
Making the font for the cloud ID smaller looks better (and works much
better for long email addresses).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Kirigami appears to have a bug that makes it fail to show our icon.
With this we can be much more flexible in what we show in the top area
of the global drawer.
Fixes#1331
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add settings variables/functions to qmlprefs
remove settings variables/functions from qmlmanager
change manager. to prefs. in qml files for setting variables/functions
Signed-off-by: Jan Iversen <jani@apache.org>
This way the menu items describe what happens when you tap on that menu
item. That seems more consistent and intuitive.
See #1204
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the slot pageStack.onCurrentItemChanged() is reached
make sure that the stackView becomes non-interactive.
This prevents swiping left on the map to "go back".
Also, always reload the map markers when the map becomes visible.
This is not optimal and instead something in the lines of:
DiveList.model.onChanged()
is a much better solution.
Ideally the map reload should happen on dive removal, dive addition,
dive edits and sync from cloud.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
showMap() uses a location to open Google Maps in a browser.
Make showMap() a generic function to push the mapPage on the view
stack.
Update the calls to this function from child widgets and pages.
Also either call mapPage.centerOnLocation()
or mapPage.centerOnDiveSiteUUID() depending if the caller
wants the map to center on a dive site or on map coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
See also 15cdcdbc6. There, we introduced the wideScreen (set to true)
to evade a (cosmetic) bug in (most likely) Kirigami. The top dive
was partially obscured on the start of the app. And by setting the
wideScreen to true, the application header became of a fixed height.
Numerous changes further in Kirigami, we can now set this property to
false. This results in a correctly displayed divelist at the start of
the app, and *also* an application header that correcly hides itself
when scrolling up, and displays itself again when scrolling down. So,
a behavior that is common to, for example, mobile brouwsers.
This all said. I still believe this is a workround for strange behavior.
In fact, we should not need to set this wideScreen property at all,
and Kirigami should behave correct in all cases (true, false, unset
at our end). It behaves correctly when set to true or false, but
still displays a partially hidden top item in the dive list when
unset.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Also, this got broken after the Kirigami to verion 2.2 in main.qml.
So, set the header background color according to our theme setting.
Notice, that there is a remaining issue here. We could color the
text color in the header, but now, this seems impossible (or I
do not understand how and where to set this).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a long standing issue. I wish to keep up with Kirigami developments
including new versions of their controls, but this is not always easy.
While we upgraded to Kirigmi 2.2 for most of our QML earlier, using this
new version of main.qml breaks numerous stuff. In fact, so much that
we just needed to wait.
With the progress in Kirigmi, it is now possible to upgrade, with still
some issues on our side to be fixed, but this is manageble now.
The main show-stopper was a construct to set our theme colors, for example:
Kirigami.Theme.highlightColor = Qt.binding(...)
This is not posssible any more, as the Kirigami.Theme has made these
readonly on their end.
This commit just removes the assignments to the now readonly theme
items. And the setting of a correct theme color for the action button.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See e6e1473e6. Exact same commit but here for the
list of divemaster. The careful reader will spot a
small addition to the clearDetailsEdit() QML function.
Two more field are cleared.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
