In planner or profile-edit mode, the plotDive() function takes
the current plan and turns it into a dive profile. Not only
is this a layering violation (the display layer modifying the
dive), it is also fundamentally flawed. The control-flow is
out of control, if you wish. There are numerous reasons why
the profile needs to be replot, many of which do not need
a recalculated dive profile.
Move the code that updates the dive-profile to the
DivePlannerPointsModel. Thus, the profile recalculations
and replots can be pooled. This will break the planner, since
there now might be missing calls to the profile recalculation.
But it already has some positive effects: when removing
multiple points, the profile is only recalculated once.
This will need much more work, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePlannerPointsModel::addStop() function is called by
the profile to add a planner-stop. It is also used internally
to create profiles.
If we ever want to include this in the undo system, we have
to split these into to versions. One will ultimately place
an undo command and update the profile, the other one doesn't.
For now, this makes the external interface simpler, as some
parameters are redundant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive handlers are only updated by signals. This means that
switching into edit-mode has to be done in steps:
1) initialize the DivePointsPlannerModel
2) switch profile mode
3) load dive into DivePointsPlannerModel
2) and 3) cannot be exchanged, or the dive handlers are not
initialized.
To avoid this sandwitching of profile- and model-initialization,
populate the dive handlers when switching the profile mode.
Thus, the profile can be switched into edit/plan mode when
the DivePointsPlannerModel is fully initialized.
This will be important in upcoming commits, when the initialization
of the dive is moved from the profile to the DivePointsPlannerModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePlannerPointsModel::createTemporaryPlan() function had
two distinct and independent parts:
1) create the data points.
2) create the dive sample and calculate variations.
The second part was only exectuted if the recalc flag was set.
Out of the two callers, one was explicitly disabling and setting
the recalc flag to avoid the second part.
The much more logical thing is to simply split the function in
two and only call the first part.
To avoid any functional change, the second caller (the profile)
still tests for the recalc flag. However, if it shouldn't replot
a new plan, why calculate it in the first place!? And why does
the display function change the plan at all? This appears all
very ill-thought out and should be changed in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way the blocks in DivePlannerPointsModel::setData()'s
switch statement were demarked messed with my mind.
There were at least three variants. Let's try to be consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only external user of setRecalc() was turning recalculation
on. In fact, this happened when constructing the planner-widget.
However, for example editing of the profile only works when
the recalc flag is on.
This is all very confusing, let's just turn the flag on by
default and remove the accessor. Internally, the planner can
simply use the std::exchange function to set and reset the
recalc flag.
Perhaps the setting/resetting can be replaced by simple
recalc = true;
...
recalc = false;
pairs. It is unclear whether there is need for recursion.
Something to be investigated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When moving "dive handlers" with the cursor keys, the
profile was replot twice:
- First the recalculation of the planner model was suspended.
- The "stop" was moved.
- This led to a replot by a signal from the planner model.
However, the old profile was shown, since the recalculation
was suspended.
- The recalculation was reenabled.
- The profile war replot, resulting now in the correct profile.
A classical case of bit rot.
Instead, don't suspend calculation in the first place. This
shows the correct profile on the first replot and the second
replot can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ItemPos structure describes the position of various chart
elements on the scene. It had two problems:
- The identifiers were starting with an underscore followed
by a capital letter. This is reserved to the compiler.
- The global object was initialized in the ProfileWidget's
constructor. This means that if there are multiple
ProfileWidgets, the structure is reinitialized even though
it is constant.
Remove the underscores (what was the point anyway?) and
initialize the structure in its own constructor. Moreover,
make the object const to drive the point home.
If this ever needs to be variable, each ProfileWidget
should get its own copy of the object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MainTab::updateDiveInfo() is not executed when in the planner.
To decide whether the application is in the planner state,
it queried the profile. Instead, query the DivePlannerPointsModel.
Currently, there is no autoritative carrier of that flag.
However, the MainTab has a dependency on DivePlannerPointsModel
anyway, and therefore this removes a dependency on the
profile. This brings us closer to a state where we can have
multiple profiles.
Ultimately, it is hoped that the whole check can be removed
at this place, making the point moot.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove mainwindow-access from the planner, by setting
the profile to planner state in the owner of the profile,
viz. the MainWindow.
The MainWindow sets the application state to planner, so
it seems legit that it also sets the profile state.
This removes a further interdependency.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The accept / reject message is only shown in edit-mode, no
need to check it. This is a step in simplification / removal
of the edit mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far the profile operated on the global displayed_dive. Instead,
take the dive to be displayed as a parameter to the plotDive()
functions.
This is necessary if we want to have multiple concurrent
profile objects. Think for example for printing or for mobile
where multiple dive objects are active at the same time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When moving a planner point with the cursor, nothing
is wrong with extending the dive time by stepping
beyond the current maximum. Same for depth.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code took care to not delete planner-points when no
points are selected. However, it assumed that all selected
objects are planner-points. But then it checked whether
the selected object actually is a planner-point. So which
is it?
Remove the outter check for an empty selection. This makes
things more logical and more robust, should there ever
be other objects that can be selected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove global state, make the dive that DivePlannerModel
works on a member variable. Pass the dive in createSimpleDive()
and loadFromDive(). Moreover, this should pave the way to more
fine-grained undo in the planner. Ultimately, the planner
should not be modal.
Attention: for now, the dive must still be displayed_dive,
because of the convoluted way in which the profile and the
planner work on the same dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Both loadFromDive() callers were clearing the model before
calling loadFromDive(). Move the clearing into that function
since it makes no sense to load into a non-cleared model.
Apparently this changes the way that no-cylinder dives are
treated and the code in ProfileWidget2::repositionDiveHandlers()
must now explicitly check for that condition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DivePlannerPointsModel::clear(), the cylinder model is
updated before it is cleared. This must be an artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There must not be two dive planner points at the same time
stamp, as this violates the laws of physics (and internal
assumptions).
The corresponding test was done in the profile code at
two different places with floating point arithmetics.
This is a bad idea, because
1) code duplication
2) danger of rounding issues
Instead, do this in one central point in the planner model
and use integer arithmetics. Simply add a few seconds until
a unique timestamp is obtained.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When moving the handle with the mouse, the old code tried
to be smart about changing the active handle when crossing
handles.
To me this always felt weird and it was inconsistent with
mouse-move. Theregore, simply do nothing special at all. The
user should hopefully get an intiutive grasp of what's going
on when moving one handler across another.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This model is only needed when in plan mode. To enable multiple
profilewidgets at the same time (e.g. for the mobile app or
for printing), make the pointer to DivePlannerPointsModel a
member variable that is initialized at construction time.
Moreover, allow passing null as the DivePlannerPointsModel,
in which case planning will be disabled. This will be useful
for simple printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The connection to the DivePointsPlannerModel was done in two
distinct functions: setAddState() and setPlanState(), which
means that these could easily get out-of-sync. Factor this out
into a single function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When reordering the points, the DivePlannerPointsModel would
not emit the appropriate move signals, but simply a data-changed
signal over all elements. This obviously violates Qt's
model/view API, though it is probably harmless. Let's do
the right thing so that the frontend knows that the selected
item changed place.
Also, emit dataChanged only on the actually changed element,
not all elements.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ProfileWidget2 slots, which reacted to model changes were
broken. They did not add / remove items at the changed positions,
but arbitrarily at the end. Moreover, they assumed that only
a single item was added / removed and thus violated the model/view
API.
This worked because the handles are completely reset after each
operation and the model only ever touched single items.
Nevertheless, this has to be fixed if we ever want finer grained
undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of manually deleting them (and the gases). Currently
there is only one point where these are deleted, but if
we implement proper Qt model/view semantics, this makes things
less headachy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The beginRemoveRows() function was fed erroneous values. It
is a mystery why this didn't crash. In any case, deletion
of multiple points did not work properly. Instead of trying
to be fancy, remove each point one-by-one.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of inserting the point at the calculated
position, the DivePlannerPointsModel would append it
at the end and then resort the vector. That's just
silly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clearing the model, use "beginResetModel/endResetModel"
instead of "beginRemoveRows/endRemoveRows".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking on "+" in the planner, a default stop point was
added using a signal/slot connection. This used the archaic
string-based connect syntax, because it was realized with
default parameters passed to "addStop()". Instead, add a
"addDefaultStop()" slot, which passes the default parameters.
Since all other callers do not use callbacks, unslotify
"addStop()". The slot was the only user of the default parameters,
so they can be removed alltogether.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are a few more candidates, but these conceptually really
shouldn't be slots. getSurfacePressure() is an accessor and
loadFromDive() initializes the model with a dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The font-size in printed profiles is based on the size of the profile
in the main window. This makes no sense. Why should changing the
window size change the font-size on printouts?
Matter of fact, when making shrinking the height of the window to
its minimum, comical printouts are obtained (font way too big).
Therefore use an arbitrary rule: Say that profiles 600 pixels high
look reasonable and then scale up to the actual size on the printout.
This may need some tweaking for high-DPI mode. But that seems not
to be supported on desktop anyway?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Update README and ReleaseNotes.
Also remove outdated workflow badge, add a couple new one, and hack around a
rendering issue where the last character of longer workflow names gets
overwritten by the status - which resulted in the arguably most important info
(which Qt version) being hidden.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "in_planner" condition was inadvertently inverted in
c6d78bc134 and therefore the wrong data was used to draw
the line (density instead of SAC). Revert to original.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a bit lacking sophistication (you need to remember to make clean
before rebuilding when changing this option, etc), but it works well
enough for my purpuses.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive selection was initialized during data-reset. However,
this emitted a signal before all data-reset routines were run.
Ultimately, this led to access-after-free in the statistics code.
Instead, move the select_newest_visible_dive() signal from the
divelist-model to the process_loaded_dives() function. There
is no point in initializing the selection if the dive data
is cleared after all.
This change broke closing of the log, because the UI-selection
was not reset. Therefore, when clearing the data, clear the
selection before proceeding with clearing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Apparently, the visibility flag of the view is not inherited
from the statistics widget. Therefore, the statistics is
redrawn on every action even if not visible.
Set the visibility explicitly in the show- and hide-events.
This is crazy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For some reason, this test seems not to run effectively, at least
locally, I had to update the reference file.
Added a check that indeed the file to be compared was
successfully opened.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In 9bfc6d252, testing of the planner was changed to use the
planner_ds parameter instead of a global variable.
Unfortunately, two conditionals were inverted, leading to
an erroneous ceiling calculation when in the planner.
Restore the proper conditions. Moreover, instead of testing
the planner_ds parameter, use the already existing in_planner
flag, which is derived from said parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds text and 5 images, detailing how to create a new cylinder type.
This appears to be a perrenial problem, often appearing on the mail
list.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
