This patch implements a separation of the code for gas pressure
calculations from the rest of the code in profile.c. The latter
file is now split into: profile.c and gaspressures.c. The
details of the transferred functions is given at the top of
gaspressures.c. The following chnages were made:
1) dive.h: The function types of calculate_depth_to_mbar
and depth_to_mbar were made non-static in order to make them
available within gaspressures.c.
2) profile.c: Prototypes for the functions in gaspressures.c
were inserted at the top of profile. Ten functions were
transferred from profile.c to gaspressures.c
3) gaspressures.c as well as a short header, gaspressures.h
were created.
For the gas pressure calculations for CCR dives, gaspressures.c
forms the immediate basis for further code development.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we can't edit the trip date, we need to remember to
re-enable it after we disable it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using QToolBar I was able to remove much of the dead code
from the mainwindow.ui xml file by transforming the QToolButtons
into actions and loading them dynamically in the .cpp code.
I couldn't use the designer for this ( as I wanted ) because
Qt has no notion of ToolBars outside of the areas where the
MainWindow should have one, and we use it in a very different
area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just added the missing files to the CMakesList.txt
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Basically we could end up in a situation where the plotInfo is no longer
valid, yet the model changes and triggers a redraw before the new data is
passed into the TankBar.
Instead of chasing that race condition it seemed much easier to just copy
the plot_data entries and the gas information in the dive.
Fixes#716
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And move the units there.
This is a long going back and forth. What we want is narrow columns. But
what we need is something that's easy to understand for our users.
I'm open to other suggestions, but I think this moves us in the right
direction.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was an interesting bug. When adding a dive that would end up in the
middle of the dive list, the newest dive in the dive list would end up
marked in the dive structure as selected - even though it wasn't
visualized as selected by Qt. Bad things happen if the user then made
changes to that dive without selecting something else first, for example
by either editing the dive or doing things to it like removing it from or
adding it to a trip. The same operation would also be applied to the
newest dive in the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to offer a simple way to remove a calculated deco, if Control is pressed
while clicking on the trash can in the dive plan, that point and all following are
removed. This way the user can Ctrl-click on the first calculated waypoint.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user right clicks the globe, we should only present the menu action
if there's a current dive, if not, we disable it.
Signed-off-by: Karina Mochetti <karina.mochetti@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code seemed way complicated, made way too many assumptions
and apparently was broken in certain cases.
This code seems very simple, looks correct and should fail gracefully
(i.e. simply do nothing) if things get confused.
Fixes#706
(I hope)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When backing up dive computer settings to XML, the confirmation
dialog shows the default file path. This patch fixes that by
displaying the correct file if the user changes the backup location.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This worked flawlessly on Mac and Linux, but on Windows I needed to add
the explicit setVisible here - not quite sure why.
Fixes#710
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was stupid on my part - I didn't look closely enough at the offending
commit the first time I tried to fix it. And didn't have access to a
working Mac with working Qt4 to test (still don't).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a keywords entry and some keywords in the .desktop file.
They are (should?) be used to improve application search in DEs.
http://standards.freedesktop.org/desktop-entry-spec/latest/ar01s05.html
Signed-off-by: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only plan OC dives, so let's not confuse things by showing the
set point for the tank.
Fixes#261
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the fix in commit f7119bdccf ("Planner: make sure no old
handles are around when entering Add/Plan") was incorrect. We ONLY want to
remove the existing handlers when we re-plan a dive, NOT when we call add
or plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. The modifications to the selection cause a redraw of the
profile. So we need to make sure that we leave the plan state and return
to profile state BEFORE we do this, otherwise we'll call into
createTemporaryPlan() with invalid data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this information, when we re-plan a dive we can bring the user right
back to the point where they ended - they have the waypoints in the dive
pointes table and handles are shown on the right points in the profile -
and the rest of the dive is once again calculated by the planning
algorithm.
For now this state is lost when saving the dive file as we don't add this
flag in the sample to our saved files. So if we don't find any samples
marked as manually added we add ALL of the samples as way points on the
diveplan and the user has to manually remove the ones that were
calculated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some cases we don't appear to remove all of the old handles from the
scene and end up showing a handle from a previous instance of the planner
in the upper right corner of the profile.
This patch makes sure that we remove any stray handles that might still be
around before entereing plan or add mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While planning we might have made changes to the displayed_dive. So we
need to make sure that the profile is redrawn after we cancel a plan (or a
re-plan).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When doing this, all waypoints of the calculated ascent are now waypoints
in the plan - so the user has to remove the ascent part of the dive in
order to really replan the dive. That's a pain, but we don't keep the data
around that would tell us which waypoints are user input and which ones
were calculated.
Fixes#527
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's silly to carefully calculate our ascent for each new waypoint that we
add to the plan. Let's get them all in and THEN calculate an ascent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply setting the pointer to NULL leaks memory.
And that C++ recursive two function implementation... oh boy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old implementation was... let's call it creative.
This tries to actually get things right instead of using magic.
Don't pretend that double values are ints.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same logic as we do for newly added dives.
As a side effect this patch appears to fix the issues with getting the
newly planned dive selected.
Fixes#692
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some circumstances Qt will draw a really thick border around
rectangles. This explicitly makes the border of the tank bar thin.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
<QPrinter> is in QtPrintSupport, so we need to declare we want to use
it.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we can easily decode the start time of the dive that is currently being
parsed (i.e., if the information doesn't happen to straddle a block
boundary) then show that in the dialog's progress bar.
Make the explanatory text before it shorter so there's enough space.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This change changes the way we present the OSTC 3 firmware version to a
correct value, showing the major and minor version number.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
-Change column name to 'Gas' as changed in Subsurface.
-Replace '--' with 'Air' to empty tanks.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Buttons and fields colors must be consistent in different themes.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also change the separator to a colon which is more readable.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
