This makes no sense and seems crazy. But it also seems to work,
For some reason with the current Kirigami version and Qt 5.13.1
selecting the map page makes the pageStack jump back to the previous
page right away. I cannot find what triggers this behavior.
Since I cannot fix the root cause, I am working around the bug. When we
select the map page we remember that fact and when a different page is
picked with the mapPage being the last page on the stack, we force the
page selection back to the map page. I can imagine countless ways in
which this could go horribly wrong - but right now I can't figure out a
better solution.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There doesn't appear to be a reason to pop all of the existing pages from the stack.
Just on principle, only close the drawer if it was open.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had very strange results with the current Kirigami.
Instead set the width of those pages based on our overall column width.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old calculation was clearly bogus, we'd also get zero columns here.
Instead do a correct calculation of the number of columns and make the
resulting column width a property of the rootItem so we can refer to it
elsewhere.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We get incorrect changes to a new screen width that causes us to try
draw to a much larger screen than we actually have. Ignore those
changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Different Android devices seem to have different patterns of throwing
incorrect width information at us. This seems like a really bad hack,
but for the ones I've seen so far this should give us the right width
information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the default font size is big enough to leave us fewer than 21 grid
units per row, shrink the grid unit.
In order for this to create consistent results, we need to reduce the
default column width to 21 grid units as well. And with that change, the
columnWidth property becomes obsolete.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's important to disconnect the model from the ListView, otherwise the update in a
different thread will fail.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this is the starting point of my following commits, I decided to
leave it in place to give Jan credit for the work he did on
figuring out some of the plumbing needed to get things to work]
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is no reason (any more?) to have a property defined
that basically renames the global pageStack into a local
pageView. Just cleanup.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
After the previous commits, we now have a preference that nicely
preserves the state of the UI, and we have the well known git_local_only
global, that is used to denote whether we want to use to local repo
only, or we want to interact with the online cloud as well.
This commit gets rid of the now superfluous syncToCloud logic. Instead
we simply set the git_local_only directly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Hook up the new preference to the UI. So now, an earlier choice
if automatic or manual download to the cloud is preserved in
between sessions. Strictly speaking this fixes issue 1725.
Notice that there is also a higly related syncToCloud thing
present. As factoring out that seemingly duplicate piece
of code is non-trivial, this will be done in a seperate
commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
We disabled the drawer menu button to switch between auto/manual
sync when in no cloud mode. Unfortunately, disabeling does not
give a visual cue to the user (like greyed out). Instead, just
make this button invisable in no cloud mode.
In conjunction a question. The manual sync to cloud menu item
takes you to the Cloud Credetials page in case pressed in
no cloud mode. While valid, this seems strange. This is not
changed in this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A relatively big change for such a simple page. Most relevant
changes are:
1) Do not use Kirigami.Header anymore. It appears that this header
has word wrapping on (and we cannot override that). This is
annoying on this page, as headings seems randomly be split over
2 lines, even in cases where there is more than enhough room to
display it on one line. And as the Kirigami.Header is just a
trivial wrapper of a Text field, we can simple replace it.
2) A lot of the toplevel GridLayouts had width properties set. These
are not needed (and confused my debugging code), so they are removed
withput any visual change. As a general rule, do not try to set
properties that are not needed. In general, it can only lead to
binding loops or undefined behavior.
3) Add a font size to our Theme. The step from regular to title size
was a little too big.
4) And, obviously, numerous font.pointSize lines are added to actually
resize the font.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
By manipulation the used font pointSize property, we can dynamically
scale fonts and derived UI objects. At the same time, we have
some logic to determine the default font, its size, etc, for example
depending on screen properties. The scaling of the UI (and its font)
does not need to interfere with those defaults.
However, when we want to reset the pointSize, we alter the default, so
a backup of the default is needed. Ok, not al full backup, as the only
thing we like to manipulate is the pointSize, to which we want to be
able to return.
All this leads to this commit. A basePointSize property is added, that
is initialized from the default. Due to the binding logic of the QML
engine, it is not a classic initialization, but a binding between the
2 properties. We need to break that binding explicitly, so that
the original PointSize is always preserved.
In addition, a display of the new font property is added to the
developers theme test.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It seems the documentation is incorrect - unless you explicitly set the
ApplicationWindow font to the the Application Font (just writing this
down sounds so silly...), it doesn't actually work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove developer from qmlprefs and use qPref instead
Update qml
show_developer is saved on disk, and thus remembered between starts.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to address the C++ object directy in qml, a different
registration is needed.
qmlRegisterType, registers the C++ class, allowing qml code to inherit
from it and make qml objects. This is needed for graphical elemnets
like profile and map
setContentProperty, registers the C++ object, thus allowing signals to be
catched.
Signed-off-by: Jan Iversen <jani@apache.org>
This is the first commit related to the removal of the GPS
webservice. It is nothing more then removing 2 buttons from the
menu to upload and download from the server, so technically
a trivial change.
As with the desktop application: Be very careful here as this
forces our users to use Subsurface-mobile, and a online cloud
account as that is the way to transfer GPS data from a mobile
device to the desktop.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add the UI components to let the user set the default cylinder and select
the chosen cylinder when adding a new dive.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This only works if the USB device contains enough information to do so.
We need to collect more information to understand what information we
get if those get plugged in. Maybe we'll get only the vendor and need to
leave it to the user to set the product (which we can do by passing an
index of -1 for product).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unless, of course, the user was editing or adding a dive - that would
be annoying to have interrupted (even though, of course, it's the user
plugging in the device which would trigger this in the first place).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user plugs in a device on Android we get a device string that
should allow us to figure out which dive computer was plugged in. Make
that string available to the QML UI.
Right now all we do is log it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add enum to qPref and remove elsewhere
update source core to reference qPref.
the enum cannot be in pref.h because it is to be used in qml and Q_ENUM
need the enum to be defined as part of the class
Signed-off-by: Jan Iversen <jani@apache.org>
The asynchronous load seemed to be (at least one of) the culprit(s) of
the banner occasionally not showing up.
Making the font for the cloud ID smaller looks better (and works much
better for long email addresses).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Kirigami appears to have a bug that makes it fail to show our icon.
With this we can be much more flexible in what we show in the top area
of the global drawer.
Fixes#1331
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add settings variables/functions to qmlprefs
remove settings variables/functions from qmlmanager
change manager. to prefs. in qml files for setting variables/functions
Signed-off-by: Jan Iversen <jani@apache.org>
This way the menu items describe what happens when you tap on that menu
item. That seems more consistent and intuitive.
See #1204
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
