There are a few more candidates, but these conceptually really
shouldn't be slots. getSurfacePressure() is an accessor and
loadFromDive() initializes the model with a dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The font-size in printed profiles is based on the size of the profile
in the main window. This makes no sense. Why should changing the
window size change the font-size on printouts?
Matter of fact, when making shrinking the height of the window to
its minimum, comical printouts are obtained (font way too big).
Therefore use an arbitrary rule: Say that profiles 600 pixels high
look reasonable and then scale up to the actual size on the printout.
This may need some tweaking for high-DPI mode. But that seems not
to be supported on desktop anyway?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Update README and ReleaseNotes.
Also remove outdated workflow badge, add a couple new one, and hack around a
rendering issue where the last character of longer workflow names gets
overwritten by the status - which resulted in the arguably most important info
(which Qt version) being hidden.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "in_planner" condition was inadvertently inverted in
c6d78bc134 and therefore the wrong data was used to draw
the line (density instead of SAC). Revert to original.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a bit lacking sophistication (you need to remember to make clean
before rebuilding when changing this option, etc), but it works well
enough for my purpuses.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive selection was initialized during data-reset. However,
this emitted a signal before all data-reset routines were run.
Ultimately, this led to access-after-free in the statistics code.
Instead, move the select_newest_visible_dive() signal from the
divelist-model to the process_loaded_dives() function. There
is no point in initializing the selection if the dive data
is cleared after all.
This change broke closing of the log, because the UI-selection
was not reset. Therefore, when clearing the data, clear the
selection before proceeding with clearing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Apparently, the visibility flag of the view is not inherited
from the statistics widget. Therefore, the statistics is
redrawn on every action even if not visible.
Set the visibility explicitly in the show- and hide-events.
This is crazy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For some reason, this test seems not to run effectively, at least
locally, I had to update the reference file.
Added a check that indeed the file to be compared was
successfully opened.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In 9bfc6d252, testing of the planner was changed to use the
planner_ds parameter instead of a global variable.
Unfortunately, two conditionals were inverted, leading to
an erroneous ceiling calculation when in the planner.
Restore the proper conditions. Moreover, instead of testing
the planner_ds parameter, use the already existing in_planner
flag, which is derived from said parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds text and 5 images, detailing how to create a new cylinder type.
This appears to be a perrenial problem, often appearing on the mail
list.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Both the calculations for CNS and OTU did not take
into account the pO2 drop when using a PSCR. Furthermore,
there was some unit confusion due to not using internal
units.
Reported-by: arosl
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Just changing the two user manuals. This also includes a couple other spell
fixes as well as one small adjustment regardinf IrDA support on Linux (which
has been gone for a while now).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add section dealing with statistics restricted graphing.
Add section dealing with lack of IrDA support on new OSs
Do spell check of complete text.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
When parsing "event 123" (?) a picture is added, without
initializing the picture structure. Thus, a picture with a
random gps location is added.
Use the "empty_picture" initializer to avoid that. Fixes a
Coverity warning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This silences a Coverity warning. In principle, this should
never happen, since there are no slices if totalCount is 0.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This silences a Coverity warning. That what harmless, but
it's probably good practice to initialize all members.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We used to round the ceilings for the individual tissues with
%.1f but the maximal (and thus effective) ceiling only with
%.0f. This makes no sense or be rounded up (to the conservative
side).
This commit shows also the maximal ceiling with higher accuracy.
Reported-by: Peter Hübner
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When doing OC bailout from a CCR dive, there could still
be pO2 sensor readings but those are not valid.
This fixes a problem noticed by Justin Ashworth.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Even when diving a CCR, the pO2 cannot exceed ambient
pressure. This only makes a difference at shallow depths.
Fix this in the calculation of OTUs and CNS.
This affects some tests that now have slightly different CNS and OTU values.
Suggested-by: Justin Ashworth
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We had a user request to allow for setpoint changes
at certain depths for CCR deco.
You can now enter a cylinder with name like
"SP 1.4" ('S' and 'P' and ' ' and a float) with
a switch depth and that cylinder is interpreted as
a depth dependent setpoint switch.
This user interface is a hack. But I believe that such
setpoint changes are similar enough to gas switches during
deco and should thus be handled in a simiar manner.
I would be happy to hear ideas how this could be made
less easter eggish.
Suggested-by: Justin Ashworth
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We already had the script to post-process the HTML files in the repo,
but we didn't automate use of that script in the Makefile. The .wp
suffix is misleading and historical (we no longer us WordPress), but
it's what I am used to and I didn't come up with something more obvious
or better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better image placement, other small changes.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes all the font sizes relative and avoids odd effects on some browsers.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way they don't exceed the page size.
This also removes execute bits from a couple of pictures. That's just wrong...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The application state is a desktop-only thing. The mobile UI
also has its application state, but that is something completely
different.
The last remaining user of the application state was to flag
whether the planner is active. Since this has all been
unglobalized, the ApplicationState structure can be moved
from core to the desktop UI. And there it can be made local
to the MainWindow class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is not needed anymore, since the planner passes down the
in_planner flag to the appropriate functions. The planner state
is not queried via a global anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TemplateLayout prints different dives depending on
whether the planner is active. Instead of accessing a
global variable, pass the status down from the MainWindow.
That's all quite convoluted, since there are multiple
layers involved.
On the positive side, the in_planner() function has now
no users an can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to AbstractProfilePolygonItem::replot(). Thus, calls to in_planner()
can be removed.
This is a bit sad, since the in_planner argument is now passed
to numerous replot() reimplementations of classes derived
from AbstractProfilePolygonItem. However, it is only needed
for one, viz. DiveGasPressureItem. Well, perhaps in the future
more features will depend on the planner mode...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
AbstractProfilePolygonItem::shouldCalculateStuff()'s definition
has been removed some time ago. Therefore, remove its declaration.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to decoMode(). Thus, calls to in_planner() can be removed.
This is a more-or-less automated change. Ultimately it would
probably be better to pass the current deco-mode to the affected
functions instead of calling decoMode() with an in_planner
parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to clear_deco(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to vpmb_next_gradient(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to add_segment(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
