The progress bar shows the progress of both the rendering part and the
templating part, unfortunately we can't check the progress of Grantlee
templating engine so the progess bar doesn't have a constant pace it
stops a little around 20%.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the main function that prints dive lists.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move print_options struct to printoptions.h, its more relevant to be
placed here.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code can be removed as we don't need QT printing code anymore.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove obsolete code and add new customizable print code to the options
dialog.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't need any further calls to printLayout as it will be replaced by
Printer class that handles the new custom printing capability.
Also fix one coding style issue.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connect the signals and slots so we can use the stuff I programmed.
Sorry for the noise on the patch - most of this is whitespace
fixes done by the QtCreator.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method was written a long time ago, now we need to use the new
versions of it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't save the uuid of the newly created dive site on the affected
dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reject changes was correct only for Edit, but not for Add. When in add
mode we need to retrieve the old dive site, and when in edit mode we
should do nothing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Edit will always fire,
Filtering only if the dive site already exists.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And not when we are adding a new dive site.
Also, remove hide button call.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not sure if this is the right approach, but it seems to work: when we
reset the state of the widget, we try to get the current dive site from
the current dive, and set it.
This way it will work for the globe later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we start the dive site edit dialog, either for add or for edit, we
don't save the state, so the reject state didn't know what to do with the
dive site.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All those calls are unnecessary:
The first will be called when the QComboBox in the MainTab changes
its index, and the other two calls shouldn't be called: the only thing
that should change a dive site inside the LocationManagement is the
LocationManagement.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'll connect this in the future with a few methods that will try to
maintain state between dive changes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can only enter in editing state by opening the editing dialog, so the
mainwindow check is now invalid. and also we shouldn't set the editingmode
to false, since we will edit until the user clicks close.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we didn't have a proper dive_site_table, the dive sites where
scattered across all dives and so we looped over all dives to find the
dive sites and add them to the tree. Now this is a bit cleaner, a bit
faster.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The globe used to allow the user to pick a dive site if the dive didn't
have coordinates, but this is now wrong since when in dive site editing
mode we can select multiple times new coordinates for it, and it should
only be marked as finished when the user actually finishes it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When setting a dive, we fire the dive site change a few times after the
index of the QComboBox is changed; we don't need that - fire just once.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clear was the right method to call when we used a line edit, and the line
edit didn't had a model to provide data. Calling clear() on a QComboBox
will delete all itens inside of it, and what we wanted was to choose an
invalid index - and that's -1
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code was commented out when I started to port the locations to new
code, and it's harmless to remove it now.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we are modifying the dive site inside of the dive, we can't ask the
dive for the new one, and we also can't use the name of the dive site, as
there's the possibility that two or more could have the same name, so rely
only on the index of it to get the uuid. The index is variable since we
will sort the dive_site_table alphabetically, but this doesn't matter
since we are using it only temporarely to get the uuid, and this one never
changes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The KMessageWidget that we used was from an ancient version of KDE4, KF5
is out for quite a while, so it's good that we also update our software
that uses parts of KDE.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, there's only one crash left (that I put a big TODO: on the maintab.cpp
about) and I'll fix it tomorrow as it's quite late here and I'm almost
sleeping at the keyboard.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I tought about it a bit, and the combobox of the location management was a
bit overkill - we already have another combobox to select the divesite and
also the plus button to add one.
If the user wanna edit the current divesite, he can go to menu and edit it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We are not going to use the add, edit, remove buttons. Removing will be
automatical, addition will be triggered when clicking on the plus on the
dive site. edit is automatically enabled as soon as you try to edit
anything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correctly change and update the dive_site, updating the name on the
combobox or other attached views.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also reorganized a bit of the code, and renamed a few misleading methods.
[Dirk Hohndel: remove some C++11 code]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trigger the ManageDiveSite from the MainMenu.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The credential callback doesn't appear to work (at least not the way I
implemented it) with v0.22 and earlier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far there is no mechanism to actually create a repository on the
server, so this only works with the two test repositories.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cloud storage makes more sense that remote storage - at least I assume
that more people are used to thinking about "storing things in the cloud".
Don't use PIN or passphrase, call it a password everywhere.
Don't use copy_string() to copy the password - the git credentials routine
asserts that password is not NULL, so make sure we at least have a pointer
to an empty string here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should be asked when we are in dive_site_edit mode.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
run std::sort on the dive_site list inside of the model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only happens if you dont't have any divesites in your list, but either
way, it could happen.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing the index of the combobox we were discarting the
dive_site_id. This fixes it.
Now I need to understand what's happening to the globe.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The LocationEdit now correctly connects to the QComboBox signals, not the
QLineEdit signals.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch updates the DiveLocationModel when the
GeoLoockupInformationThread finishes, and also selects
the correct index for the displayed dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I forgot about this one, and we are going to use it
in the mobile version too.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class will surely be used on the mobile version, and it was very
tangled inside divepicturewidget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Models.h now is quite minimal, I'll keep it like that for now, until it
grows huge again. I've also cleaned a bit the headers that are using it so
only the ones that actually need the stuff that I've left behind will
actually include this file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another attempt to make it easyer to create the mobile version of
Subsurface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another attempt to make it easyer to create the mobile version.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
One more step to make it easyer to port the app to Mobile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is another effort to make it easyer for the mobile
interface of Subsurface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another change to make it easier to program the mobile ui. This was a
fairly easy patch: just moved the contents of the file and fixed the
includes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still trying to make it easier for the Mobile Port:
This patch is a bit bigger than I hopped, but it was the smallest that I
could get.
A lot of TODO items where added where I broke the code because the current
implementation would break the QML implementtion on the designer. I'll
most probably fix those myself when I finish the transition to the models
to the new folder.
I only moved both models at once because there's an interdependency
between them (seems inevitable, tough, but I'll take a better look at it
later).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an attempt to help share code between the desktop version of
Subsurface and the mobile version.
More code will be moved around and the models will be split in a way that
will help recompile times and also creation of different interfaces for
different form-factors.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Corrects typo in ebaa7d1fd which impeded that changes in dive rating
were saved after editing.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows entering / storing the PIN (aka passphrase) for the ssh key.
The email isn't used, yet - this will be used by the automated backend to
create a unique git repository that will turn into the remote storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While we don't expose it as this to the user, we'll need an ssh key and
potentially a passphrase in order to communicate with the git server in
our infrastructure. This simply sets up a way to store the passphrase.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This copies peaces from the downloadfromdivecomputer dialog into the
configuredivecomputerdialog and connects them to be able to create a
logfile form the configuration of the divecomputer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the file selection dialog box now always adds a default
suffix to the file name we pick - which results in our test for git
storage to fail.
So if the filename looks like "<path>[branch].ssrf" then remove the suffix
that was added.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Emitting the stopFilterDiveSite signal caused us to clean up the UI which
reset currentDs to NULL if this was a new dive site...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It doesn't matter if we first enter coordinates, name, description or
notes. If there is no currentDs we need to handle that gracefully.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When double clicking on the globe on a dive with no dive site we did
almost the right thing - except that we didn't create a dive site.
Not 100% sure this is the right place to do this, but it seems to work and
prevents the crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While filtering we would have trips that were collapsed, but this doesn't
really make much sense while managing dive_sites.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Untested code to filter out dives that are not at the active dive_site.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive site management requires that we filter all the dives that are on
the current dive_site, this is the preparatory work for that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old way we set the location and *then* updated the model, so the very
first location that we tried to show was empty.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When triggering the dive_site management, we need to get the uuid that was
send to us and set it as the current dive_site on the combobox, the dialog
can fill all required info for us.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We will however create a new dive site when the user clicks on the add
button - creating it here would led to strange behavior.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setLocationId will filter the dives, so ignore the visual changes when
accepting / rejecting, it will only be triggered again when we are showing
this dialog again.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should only set the dive_site on the dive site management widget when
we are going to use that information, this is because the dive_site
management widget will filter all dives on the dive list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The suit field should take up all the remaining space and the stars should
be vertically centered with the text.
This looks much better
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The parent here should have been the mainwindow, but we create this dialog
on the stack instead of the heap and because of that we don't set the
parent to prevent a double free.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the export dialog more consistent with the rest of
Subsurface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the single filter dialog - the spacing is much better, but when
activated it seems cluttered, this is because the outer layout (the one
that encapsulates everything) has the wrong layouting - I need to find and
fix that. I'll actually change that to a splitter, it will provide a more
flexible resize of the widgets.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also, added tooltips to the Tab Texts.
I need to fix the layout issues of the Equipments, but that's not inside
the UI. Things are much more sane now.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I seem to have found a sane way to create layouts:
If it's the 'outer' layout, the one that encapsulates everything:
- Horizontal Spacing: 5
- Vertical Spacing: 5
If it's a vertical inner layout that is grouping items like label +
control:
- Spacing: 0
This way the label will be 'touching' the item, without empty space, so
you know that the label refers to that widget.
If it's an horizontal inner layout:
- Spacing: 5
Different from the Vertical Layout, we don't want to make horizontal items
touch each other, a bit of space is fundamental to the eyes.
If it's a Grid Layout:
- Vertical Space: 0
- Horizontal Space: 5
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this worked for a bit, it was very error prone as it relied in
layout having specific names, and layouts in the .ui files are treated as
substandard items. Every time a 'break layout' command is issues (and it's
issued quite a lot when trying to reorganize the items on the widget) all
layout items are removed and new ones are added later, without any of the
names.
Since the new layout can be different the old names are not usefull
anymore - and a clean compilation won't trigger a single warning either:
the name resolution is done at runtime and not at compile time, so it
would just fail silently.
Instead of brute-forcing each layout to have 0,0 or 5,5 margins, we should
put the correct values on the .ui files.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I`m now clearing the code for all use of Qt < 5, since Qt 5 was released
for quite a while and making two versions of Qt to work together is a bit
painfull.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit aggressive as it changes the globe with every single
character that's entered, but it's better than what we had before.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We still don't respond correctly to a user changing them (i.e., the map
doesn't change), but at least once they change the dive to a different
dive and back to this one things get done correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a field to the units preferences to have GPS coordinates
show as decimals (as for example Google maps does it).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
so it affect no longer the previous leg but all the following ones
with the same gas (i.e. until the next gaschange).
This makes the add dive/planner behaviour more consistent
with the rest of the program regarding gas changes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We shouldn't allow the user to change the location when we are probing
the web for the correct places if we are updating an old file from
Subsurface. This makes use of a pleasant spinner that works beautifully.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
'enable' and 'disable' is too generic, and we are only
blocking the geolocation edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Open dive file. Click Location-manage. Pick a site. Click close. Click
Location-manage again. BOOM.
This seems to make sense, but since not a lot of the code is hooked up
yet, I'm not sure this is what we want in the end. But for now it prevents
an easily reproduced crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The SimpleWidgets file was getting too big, and location information will
also need a new model - a good way to do not mix everything is to put
things in a new file.
[Dirk Hohndel: added missing include of stdint.h]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a few interface items to handle location editiing, a combobox to show
everything, and three buttons: add, edit, delete.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The layout was just plain ugly; this fixes that and also adds the
possibility to insert new controls that will be userfull for managing the
Locations.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The maintab should be disabled when the geolocation thread is
running - but if you changed the dive, it would reenabled it.
(actually this should be only on the location widget, I'll send
another path later)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know what happened to me, I connected to some signals that didn't
exist at all.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For free dives (corresponding to dive mode or duration shorter than
15min), the display format for duration is changed to display minutes
and seconds.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this worked on Linux, on the Mac we didn't have an input field to
enter the file name. With this we explicitly declare that this is a file
save dialog and that the user can specify a non-existing file name.
Fixes#872
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So just like tags do "differential editing". Figure out what (or in this
case, who) was added / removed from the displayed dive and do the same for
all other selected dives.
This does seem a bit over top for divemaster, but this is more consistent
and therefore should make more sense to the user - assuming we ever have
one who runs into this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As a side effect this changes the signature of plan(): Before it
returned an int that was supposed to be possibly an error but
we never bothered to check it. So now it's bool indicating if the
planner did add stops.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial selection change signal seems to potentially be sent
before the listview is even visible when we do the first "scrollTo()"
to the currently selected dive.
That, in turn, seems to result in that when the listview is actually
shown, it will be scroll the trip description off the visible area,
and force the current dive to be shown at the very top of the
divelist. Which is not very nice: we do want to scroll to the current
dive, but we don't want to hide the current trip in the process.
Ignoring the selection change if the listview isn't even visible seems
to fix things for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes Collapse All only visible when its needed, and it
also fixes a crash when invocking collapse all when there was
nothing to collapse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch unclutter the menu by hidding collapse all
when all dives are collapsed, and expand all when all
dives are expanded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes Subsurface usable faster for those without a good internet
connection when they are opening an older data file.
While parsing, we are only feeding an vector of locations, after the
parsing is done, we traverse the vector searching for the information on
the web.
I need to also add a way to stop if there`s no internet connection - but
this will be another patch.
Also, fixed two small memory leaks from the old imp.
[Dirk Hohndel: cleaned up the whitespace mess]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... but discard an old disclaimer and runtime table if present.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to avoid visual clutter when replanning logged dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there are more than 100 samples, average some of them so we end up with no more than 100.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old behavior was kind of crude. Just smack the tags that were on the
displayed dive on all selected dives.
This seems to make more sense. We figure out which tags were added to the
displayed dive and add them to all selected dives. And we remove all tags
that were removed from the displayed dive from all selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old behavior was kind of crude. Just smack the tags that were on the
displayed dive on all selected dives.
This seems to make more sense. We figure out which tags were added to the
displayed dive and add them to all selected dives. And we remove all tags
that were removed from the displayed dive from all selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, we left the (UEMISSDA) in the path. This can never have worked
without the user manually correcting it to just show the drive letter.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we run out of space in the Uemis filesystem we return an error. The
user could reasonably unplug the SDA, insert it again and then retry to
continue the download (that's what we tell them to do). In that case we
need to make sure we start at the correct dive otherwise the same dives
keep getting downloaded over and over again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog didn't accept "OK" and store the dives downloaded / selected so
far if there had been an error. Especially with partial downloads from the
Uemis SDA this is something that is quite reasonable to want to do, so
allow exiting the dialog with OK even after an error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of writing each dive out to a file and reading that file back in,
let's just use the internal helper function that places the dive as XML
into a membuffer.
So much simpler, so much faster.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we simply failed silently without showing the user any
indication that something went wrong. That seems wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This disables planner UI elements in recreational mode that have no function
in that mode.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dive context menu:
After the addition of the item "Add image(s) from web" the item
immediately above is "Add images". It is proper to specify now:
"Add image(s) from file(s)" to make the distinction clear. I also
change "Shift times" to "Shift dive times".
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a new divelist context menu entry which asks for a URL. The file
is retrieved and if it is an image it is added to the cache and the url
is associated to dives as with local files.
NB this currently only works with URLs pointing directly to images. But it
should not be too hard to add the possibility to add a direction via an html
file and its image tags.
To test: open dives/test43.xml and delete the image and then add the URL
http://euve10195.vserver.de/~robert/wreck.jpg
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use more explicit variabel names and make the get timestamp function actually
return the timestamp rather than getting a pointer argument
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we delete a cylinder the gas changes in that dive may have to be
adjusted. We didn't do this at all in the past. With this commit we should
be doing this right for a single dive that is being edited.
This does NOT handle multiple dives being edited at the same time (or more
specifically - if you have multiple dives selected and delete a cylinder,
the dives that had the same set of cylinders (other than the displayed
dive) will get that particular cylinder deleted, but won't have their gas
change events (and sensor data in the samples) adapted.
Possibly we should simply prohibit deleting cylinders when more than one
dive are selected.
See #834
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the way to edit the profile of a manually added dive is really
counterintuitive: you have to first make some random change to the dive
information, then the profile switches in to editing mode.
This commit adds a simple context menu entry on the profile that is only
shown when the a manually added dive is displayed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XSLT conversions create V2 XML files, but we shouldn't abort when we parse
those without having the user informed about the potential slowness - all
XSLT based imports are slow, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, that was embarrassing. Just setting it on displayed_dive doesn't
gain us anything if it isn't transferred to the selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We assumed that a trip was selected when all of its dives were selected
instead of just remembering if the trip itself was selected. I'm sure
there was a reason for that but I cannot think of any. But a side effect
is that if you have a trip with only one dive in it and have that one dive
selected and edit it, after saving your changes you end up on the trip
(which is now also selected) and are no longer on the dive. And that seems
quite wrong.
The new code simply remembers that the trip was selected. And selects it
again if it was.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we run out of space in the Uemis filesystem we return an error. The
user could reasonably unplug the SDA, insert it again and then retry to
continue the download (that's what we tell them to do). In that case we
need to make sure we start at the correct dive otherwise the same dives
keep getting downloaded over and over again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog didn't accept "OK" and store the dives downloaded / selected so
far if there had been an error. Especially with partial downloads from the
Uemis SDA this is something that is quite reasonable to want to do, so
allow exiting the dialog with OK even after an error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the functionality to undo/redo removing of dives from trips. The
code calling remove_dive_from_trip has moved to the UndoCommands class.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Planned dives must be replanned while manually added dives must be edited.
Show error messages to handle wrong user input.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since most regulators have an intermediate pressure of 10bar
the minimum value is 10 while the max is 99.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the addition of gas reserves in recreational mode
we need to make sure that the first leg is short enough
that we have more gas left than the specified reserve
even when using small cylinders like LP72.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
OSTCTools is a windows based software by Robert Angeymar which performs
configuration upgrade, memory analysis and download tasks for H&W OSTC
devices.
Downloaded dives are stored in files (one archive each) with the raw
binary data heavily padded at the begining of the file, and some other
data not included in H&W dive header protocol as the device's serial
number.
The import function simply takes the raw data part of the file and lets
libdivecomputer do the parseing.
Then adds some additional info as OSTC reported dive number and serial
device number.
Please note that OSTCTools is *not* a real logging software, it simply
gets the DC raw data, so there isn't any information about dive site,
equipment and so.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adopts the planner to the needs of the recreational diver. Rather than immediately
starting to ascent doing deco stops this mode, this mode stays at the last manually
entered depth for the maximal time before mandantory stops appear (NDL). It does not
change gas but keeps using the last used cylinder.
TODO: * Grey out unused UI elements of the planner in this mode
* Start ascent before gas runs out (or into reserve)
* Do a 3min @ 5m safety stop.
Fixes#840
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once a manually added dive is part of a trip and this trip
is edited, applying the modifications leaves the dive profile
in edit mode (e.g. points can be dragged and gas swapping can
be applied).
The issue can be viewed from another angle. Why enable
profile edits of a manually added dive which is in a trip,
while the trip is being edited in the first place?
If there are more than one manually added dives in said trip
we are enabled to edit one of the dive but probably
it's not intended to modify all manually added dives after the
changes are applied for the trip.
This patch disables the functionality in question and it also...
Fixes#864
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
once the manual added dive is added it can't be edited directly, This
can be fixed by adding an edit button to the log menu, this will be
consistent with the plan/replan buttons.
Fixes#847
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds to the prefs struct the variables last_stop, verbatim_plan,
display_runtime, display_duration, and display_transitions from the
planner so their values are saved from one session to the next.
The widgets for some of those settings had default values in
plannerSettings.ui; remove them since the new code in
subsurfacestartup.c takes care of initializing them.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Non-static class member recalc is not initialized in the constructor
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Non-static class member multipart is not initialized in the constructor
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This add support for Seabear's new import format that is used by H3 and
T1. In the future also the Hudc should switch to the new format. The
main difference to the old one is that time stamps are no longer
recorded in the samples, but intervali is specified in the header.
The header contains other useful information as well that we should
build support for. E.g. surface pressure, gas mixes, GF, and mode might
be useful additions later on.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When an user opened the "Save as" dialog and pressed the
cancel button a null string was returned. Therefore the
file_save_as function returned an error which was lately
shown when the file_save function was called.
Now the function checks if the cancel/exit button was
pressed and returns.
Fixes#844
Reported-by: longjohnsilver
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
test case:
1 - make sure that you DO NOT have anything selected on the 'Dive list;
2 - in the menu bar, click on 'Log'->'Re-plan dive';
3 - crash!
Fixes#858
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current code is dereferencing the null pointer 'profWidget'.
It can cause a segmentation fault.
Signed-off-by: Marcos Cardinot <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Even that most (or all) tables have the remove button at the section 0, the method defaultColumnWidth should not assume that it will always be true.
This patch will consider the title width of each section, instead of using a static width (which cause problems when the language is not en).
Signed-off-by: Marcos Cardinot <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When loading an image by filename and by hash fails, try to interpret
the filename as URL and download the image.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Coming back from a dive site edit we must not call refreshDisplay() or
otherwise the edits on the displayed_dive are overwritten.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise it will show outdated information. If the user edits the
location name and then clicks 'manage' we need to make sure that the
correct site is shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The char pointer was out of scope by the time we created the dive site.
Also remove the misleading comment above - it really makes sense to do
nothing in that function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added label in the ShiftImageTimesDialog which appears when
not all of the selected images have timestamp in the checked range.
Made cancel button in this widget actually work.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seperated getting image timestamp from picture_load_exif_data() and
ShiftImageTimesDialog::syncCameraClicked() into picture_get_timestamp()
and seperated checking timestamp from dive_create_picture() to
dive_check_picture_time().
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Field name changes should change all the occurrences... We ended up with
field index of -1 for average depth due to mixing field names.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As flo269 suggested in bug #507, a full view of Earth would be better
when a dive has no coordinates.
Fixes#507
Reported-by: flo269
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the ability to choose either to export photos or not.
Patch is attached.
--
regards,
Gehad
From 6476e1227b72d8297f9aecc2e6cc6f70d07f87ae Mon Sep 17 00:00:00 2001
From: Gehad elrobey <gehadelrobey@gmail.com>
Date: Fri, 13 Mar 2015 15:31:24 +0200
Subject: [PATCH] Make exporting photos with HTML optional
Add the option to enable/disable exporting photos with the HTML.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
profilewidget2.cpp:1398:25: warning: the omitted middle operand in
?: will always be 'true', suggest explicit middle operand [-Wparentheses]
profilewidget2.cpp:1403:39: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Points (handles) from the last dive ADD operation remain on
the profile unless we clear them.
fixes#846
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The point graphics are allocated but doens't seem to be
deleted anywhere. We attempt to fix that in clearHandlers().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Given that we might be adding a gas change event at t = 0 we need to check
for both that and t = time_or_first_sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
t = 0 isn't really special here. We shouldn't allow two gas changes at the
same time, period.
We also can do away with the special handling to mark the dive list
changed and replot things if a gas change gets removed. That's done at the
end of this function either way.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the existing gas change events @0:00 when new
one is added @0:00.
Signed-off-by: Yousef Hamza <jo.adam.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When zoomed in, things like moving planner points is not possible,
but if the user attempts that, replan() -> plotDive() is called
and the zoomLevel should be reset to the default value (we don't
really want that), but instead it's lost for some reason
(as the user reports: "Somes times, it changes to 100% which is ok").
If moving points becomes possible eventually while zoomed in,
we need to figure a way to replot without resetting the zoom level
in plotDive().
Fixes#851
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In practice this will sanitize Windows line terminations (discard the
carriage return);
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function was missing the check if setting that field actually changes
what's already in the data structure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may seem much more complicated but actually is much cleaner. Add each
thread we start to the list of future results and add a new UI function
that updates the UI once all of the threads have finished.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sequentially parses a file, expected to be a Datatrak/WLog divelog, and
converts the dive info into Subsurface's dive structure.
As my first DC, back in 90s, was an Aladin Air X, the obvious choice of log
software was DTrak (Win version). After using it for some time we moved to WLog
(shareware software more user friendly than Dtrak, printing capable, and still
better, it runs under wine, which, as linux user, was definitive for me). Then,
some years later, my last Aladin died and I moved to an OSTC, forcing me to
look for a software that support this DC.
I found JDivelog which was capable of import Dtrak logs and used it for some
time until discovered Subsurface existence and devoted to it.
The fact was that importing Dtrak dives in JDivelog and then re-importing them
in Subsurface caused a significant data loss (mainly in the profile events and
alarms) and weird location of some other info in the dive notes (mostly tag
items in the original Dtrak software). This situation can't actually be solved
with tools like divelogs.de which causes similar if no greater data loss.
Although this won't be a core feature for Subsurface, I expect it can be useful
for some other divers as has been for me.
Comments and issues:
Datatrak/Wlog files include a lot of diving data which are not directly
supported in Subsurface, in these cases we choose mostly to use "tags".
The lack of some important info in Datatrak archives (e.g. tank's initial
pressure) forces us to do some arbitrary assumptions (e.g. initial pressure =
200 bar).
There might be archives coming directly from old DOS days, as first versions
of Datatrak run on that OS; they were coded CP437 or CP850, while dive logs
coming from Win versions seems to be coded CP1252. Finally, Wlog seems to use a
mixed confusing style. Program directly converts some of the old encoded chars
to iso8859 but is expected there be some issues with non alphabetic chars, e.g.
"ª".
There are two text fields: "Other activities" and "Dive notes", both limited to
256 char size. We have merged them in Subsurface's "Dive Notes" although the
first one could be "tagged", but we're unsure that the user had filled it in
a tag friendly way.
WLog adds some information to the dive and lets the user to write more than
256 chars notes. This is achieved, while keeping compatibility with DTrak
divelogs, by adding a complementary file named equally as the .log file and
with .add extension where all this info is stored. We have, still, not worked
with this complementary files.
This work is based on the paper referenced in butracker #194 which has some
errors (e.g. beginning of log and beginning of dive are changed) and a lot of
bytes of unknown meaning. Example.log shows, at least, one more byte than those
referred in the paper for the O2 Aladin computer, this could be a byte referred
to the use of SCR but the lack of an OC dive with O2 computer makes impossible
for us to compare.
The only way we have figured out to distinguish a priori between SCR and non
SCR dives with O2 computers is that the dives are tagged with a "rebreather"
tag. Obviously this is not a very trusty way of doing things. In SCR dives,
the O2% in mix means, probably, the maximum O2% in the circuit, not the O2%
of the EAN mix in the tanks, which would be unknown in this case.
The list of DCs related in bug #194 paper seems incomplete, we have added
one or two from WLog and discarded those which are known to exist but whose
model is unknown, grouping them under the imaginative name of "unknown". The
list can easily be increased in the future if we ever know the models
identifiers.
BTW, in Example.log, 0x00 identifier is used for some DC dives and from my own
divelogs is inferred that 0x00 is used for manually entered dives, this could
easily be an error in Example.log coming from a preproduction DC model.
Example.log which is shipped in datatrak package is included in dives
directory for testing pourposes.
[Dirk Hohndel: some small cleanups, merged with latest master, support
divesites, remove the pointless memset() before free() calls
add to cmake build]
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is the same that is used on the MainTab, but
since they are different objects, I can't just call it.
so I'm duplicating them for the time being.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code used to trigger the edit mode a long time ago
since now I'm re-reading the code to implement the
same stuff on the Location edit mode, I realized that
this is not needed anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using gasmixes where the difference is less than 2% the planner can't
caclulate casconsumptions correctly. This sets the minimum gasdifference
to 1%.
Fixes#795
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 4867ee8ad8 ("Move the Profile out
of the mainwindow.ui") the way to access the PlannerDetails object
changed.
This does the corresponding change to the NO_PRINTING block, making it
build on Android again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Expand the undo feature by storing a list of renumbered dives' ids
and numbers so that the original numbers can be restored if needed.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is another long operation that needs showing a notification about
importing the old format log files
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Showing an Error message is better called from the Notification Object,
So for consistency old references to showError is replaced by calling
the notification object.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The main error message bar can be used to show exporting information and
other notification.
So a new Notification handler object is created in the main window
<NotificationWidget> that inherits <KMessageWidget> that shows different
type of notifications, ex. (Warning, Error and information)
Also this class contains a QFutureWatcher object that is set to handle
the QFuture variable returned from the exporting thread. this will allow
the UI to be updated when the thread finishes execution.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addes a menu entry for the user to select a directory that is recursively
traversed to look for image files and compute the hashes of those images (for
those images to be available to be displayed in dives according to their hash values).
This traversal and hash computation happens in and independend thread and so far
the only feedback to the user is that upon completion the dispayed images are updated.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon successfull reading an image file, this computes a SHA1 hash of the
image and saves it with the picture tag in the log file. When a file is
not successfully loaded (for example because the log was created on a
different computer) we look up the hash in a dictionary that maps hashes
to local file names.
That dictionary (actually two for both directions), is loaded on startup
and saved upon destruction of the main window.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is somewhat invasive as aborting the XML file read requires us to
report things up the recursive parsing chain.
What we really need to do here is to ask the user how they want to use the
data from reverse geo lookup. But for now we only warn about the fact that
this can take a while.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had a ton of helper functions in qt-gui.cpp which really didn't make
much sense. So I moved them all into qthelper.cpp.
Also moved the UserAgent helper that didn't belong in the UpdateHandler to
begin with - that's a generic helper used in many places...
With this we can successfully build using cmake again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This could cause problems if the user tries to compile with
Qt versions between 5.0 and 5.2.
Reported-by: Michele Fabi <fabiemme@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Null values should be handeled nicely instead of showing NULL or Nan.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't compare to static english string, must translate first.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes prefs.display_unused_tanks also relevant for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This could cause problems if the user tries to compile with
Qt versions between 5.0 and 5.2.
Reported-by: Michele Fabi <fabiemme@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
version.c is now object code which is recompiled each time
ssrf-version.h changes, while the interface file version.h
remains that same at all times and files which include it
will not need to be recompiled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The intention had been all along to use the 5.4 QSysInfo API, but due to
a silly mistake in the QT_VERSION check, it never got enabled for 5.4.0.
On 5.4.1 it does get enabled and, unfortunately, causes compilation
errors because the API changed between the time we backported to
Subsurface and the final version.
This commit backports the final QSysInfo API from Qt 5.4 into
Subsurface, which includes the renaming of a few functions. Since the
prettyOsName function no longer exists in the Qt API in that form, I've
reimplemented it using the API that does exist.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes prefs.display_unused_tanks also relevant for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Null values should be handeled nicely instead of showing NULL or Nan.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't compare to static english string, must translate first.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds the ability to undo shifting of dive times. The change is captured
at simplewidgets.cpp and an undo command is created.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we accept a change on the dive site management screen, it needs to be
reflected on the Dive notes tab right away.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user clicks on manage (or double clicks on the globe) and the
displayed_dive doesn't actually have a dive site associated with it (e.g.
because we are adding a dive or because it was imported or downloaded
without dive site information, then we need to make sure that there is an
empty dive site that we can make changes to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And hook things up when double clicking the globe.
The user experience isn't consistent with what we do on the main tab
(i.e., no coloring of fields that are changed), but it seems to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit awkward now. We are downloading what looks like fake dives
in the v2 format. So we create a dive site for every single fix.
After we merge those new dive sites into the existing dives we need to
throw away all the dive sites that weren't used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems to make sense to only have them on the dive site screen. For the
main UI they were redundant (we have the map) and not all that useful. The
only time people would want them is if they wanted to manually add GPS
coordinates for a dive, but that should now be done via the dive site UI.
There are a couple of FIXMEs in the code and a few code blocks that have
been commented out as they will be needed in one form or another once this
GPS handling is done on the dive site UI, which right now it is NOT.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simply tracks the names - if we have multiple dives sites with the
same name but different other data (e.g. different GPS), we could easily
get this right (well, somewhat easily, it's a UI question), but for that
we'd have to filter for dive site uuid instead of for dive location name.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the start of the preparations to edit the dive site,
passing a uuid so we can retrieve it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Name and coords of the current dive are copied to the edit dive site
screen.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make it possible to cancel or accept the location edit and
get back to the mainwindow default state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clicking on the 'Manage' button now brings you to the widget to manage it.
Nothing has been added on it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just the xml file for the Ui location information.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add ability to undo deleted dives by storing a list of the
deleted dives in a QUndoCommand.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the undocommands.cpp / undocommands.h files, which will hold a
collection of classes that will hold undo commands.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add an instance of QUndoStack in the mainwindow, and add undo/redo
actions in the edit menu. The QUndoStack will have a collection
of QUndoCommands to process the undo and redo events.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reverse all the code using the UndoBuffer class so that we can
use the QUndoStack and QUndoCommand classes. These are Qt's own
inbuild undo framework classes, offering a better undo/redo
process.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If current_dive and displayed_dive still have the same tags then we
shouldn't touch the tags of other selected dives.
Fixes#826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the filename has extension of .apd, then set the known import
automatically.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding support for importing .apd files (APD Log Viewer). They are CSV
files and already supported in CSV import, but the file extension .apd
is added here.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this text makes sense if this is a CCR dive and the diver does bail
out, the more neutral text "Manual switch to OC" works in all use cases
for this event, e.g. at the beginning of a dive when we manually set this
dive to be OC.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using that to indicate the dive type at the start of the dive, it's
visually strange to have an event marker.
See #826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the designer we set the selection type to extendedSelection
but since I removed the widget from the designer, I also had
to set it in the code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just a button on the UI.
This moves the layouts around, in an attempt to make them less
obtuse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we have an null widget, we hide the stack.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least to me it seems more natural to enumerate them row by row instead
of column by column, so now we do
1 2 instead of 1 3
3 4 2 4
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old way of creating the mainwindow made things a bit
dependent of the order of initialization, and we don't
assume that anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The flicker was caused by removing all widgets (and thus setting
the size of the splitter to zero) and then re-adding them.
I've added four QStackedWdigets that have a consistent size and
the only thing I do now is to set the corresponding widget to visible
without removing / readding anything, and thus, not messing with
the sizes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the last patch in the series of clearing up the
mainwindo.ui. Now to bugfixing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it uses the states on the mainwindow.cpp and it's finally
starting to be worth the hassle of reworking the UI.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it's created in the mainwindow.cpp as part of the new
way to configure the interface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it's started from mainwindo.cpp and it's part of the
new states
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's now set up from the mainwindow.cpp file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not used yet. The idea is to call 'setApplicationState("plan");'
and all widgegts for plan will be magically setup because we
added the plan state with registerApplicationState.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
listGlobe and infoProfileSplitters weren't good names as
now we will be able to create more types of widgets there
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the last of the current dialogs to be ported to the
new widgets system. now we need to clean the mainwindow of the
old code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This new file is the interface for the Details of the planned dive
removed from the mainwindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Plan mode still misses a widget that was done directly inside
the mainwindow. I'll extract it from there and create a proper
class in the next commit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will be used to set the 'default' state. The other
two possible states right now are plan and add; those will
be created right next.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
two #ifdef NO_PRINTING one over the other, merged them together.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function registers the different widget layouts
that we will have in subsurface. Currently we have three layouts
(default, plan, add) and a few more are comming (for instance
location) and the code is scattered around. It was making me
unconfortable.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The combination of the map / struct will change based on the
state of the application. Currently a lot of different
widgets change what is shown on the main window, and it's very
messy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If current_dive and displayed_dive still have the same tags then we
shouldn't touch the tags of other selected dives.
Fixes#826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before the dive is deleted, a copy is made and passed to the
undo buffer. When edit->undo is clicked, this dive is restored
to the dive list.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a class to handle all undo/redo events. Whenever a user
action affects a dive, an undo command will be created. A list of
these commands will be stored in the UndoBuffer, to allow for
moving forwards/backwards in the list.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add an edit menu with undo and redo submenus, and connect them to
the UndoBuffer class. The submenus are only enabled when needed.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add an empty UndoBuffer class. This will be built up on to
implement a working undo/redo mechanism.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the filename has extension of .apd, then set the known import
automatically.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding support for importing .apd files (APD Log Viewer). They are CSV
files and already supported in CSV import, but the file extension .apd
is added here.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this text makes sense if this is a CCR dive and the diver does bail
out, the more neutral text "Manual switch to OC" works in all use cases
for this event, e.g. at the beginning of a dive when we manually set this
dive to be OC.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using that to indicate the dive type at the start of the dive, it's
visually strange to have an event marker.
See #826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow users to delete dives using the delete key.
[Dirk Hohndel: small whitespace fix; removed an unnecessary
include file]
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch cleans up code for achieving the above with respect to
CCR dives. The code is simplified and shortened. The display of
gas lables on the profile is made consistent with the cylinder
pressure closest to the graph and the gas composition above/below
the cylinder pressure. The patch significantly improves the
maintainability of this code.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user may have a different theme, as i did, and it
looked very wrong.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sets the combobox to disabled if the profile is in
any mode besides PROFILE.
Fixes#824
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can end up having a divepoint that is outside the dive profile. In
this case, we used to crash, but this hack prevents the index out of
range issue.
Fixes#784
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I have no idea how the index ends up outside the range, but at least
this prevents a crash in this case.
See #784
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of inventing another way to do this (and inevitably forgetting a
path where this should be re-enabled) I renamed the DcShortcup related
function and made them enable/disable the copy and paste shortcuts as
well.
Of course there now is one exception (isn't there always?): in "ADD" state
we don't want to be able to switch DCs, but we do want to be able to
paste.
Fixes#825
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu, the completer often prevents applying/discarding the changes
on the dive info pane and disrupts editing of other fields as well. This
patch prevents the completer popup from appearing when not in edit mode
(apply or discard is pressed) or when the string is still empty.
Fixes#818
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Why someone would log in but then not allow us to post I don't know... but
it seems useful to at least handle it...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this patch, the user effectively cannot change the dive mode as
any change is overwritten by replot copying current_dive over
displayed_dive. The way out is not to call replot but only update the deco
ceiling directly.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b72c32da7 turned off replotting while the cylinder
combo box was active to speed up editing. After leaving
the combo box, replotting was enabled again and a replot
was called.
This replot is too agressive, as it overwrites the displayed
dive with the current dive and thereby resets the cyinder
change. This eliminates the replot call.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They stay valid while Subsurface is running, but once you quit, the
credentials are gone.
This way no one can steal them from our settings.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
