This removes the excessive amount of parameters on manual CSV import. We
just use appropriate string array than can be directly fed to XSLT
parsing.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add more VPM-B planner tests. The "expected" total run time is taken as the
total run time produced by the Fortran VPM-B program. For all these tests, the
results are within two minutes, which is a good result, but most are classified
as a "fail".
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a test for 100 m for 60 min dive on trimix using VPM-B
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding Linus' instructions for udev rule to our FAQ. Product ID 0031
that is used for firmware updates is not included here, as it is
probably not commonly needed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise, the results of the calculations tend to be rather
random and irreproducible...
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
this does not increas binary size increadably but is usefull
when trying to figure out what the planner is doing.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses a bit of algebra to simplify the formula for Boyle's law
correction and introduces another algebraic cubic root solver that
can also deal with negative discriminants thanks to a trigonometric
formula from Wikipedia.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Boyle's law compensation depends on first_stop_pressure. To produce
profiles similar to other VPM-B implementations, we should calculate it as the
ceiling before starting the ascent.
Commit 159c9eb2c1, Compare ceiling to next stop
rather than try to ascent for VPM-B, changed (VPM-B) to consider the current
ceiling rather than an incremental ascent between one stop level and the next.
However, the initial ascent generally steps through several stop levels, so
first_stop_pressure was still not calculated as the ceiling prior to commencing
the calculated ascent.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas switch is not part of recreational mode, so disable the switch options.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
std::ceil() in printer.cpp throws errors when compiled with mingw, so
replace all std::ceil calls with qCeil().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Editing statistics templates is not supported now, as there is no
custom template for statistics printing, so disable the template
edit area.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
The new statistics code, enable the editing of colors, font, and other
template options.
This patch enables the UI elements for these features.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
- use the same generic code for both types of templates
- check for the printing type before generating the template
- remove unused printStatistics() method
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Add a statistics template to the templates directory.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
As there are two types of templates, Grantlee need to support both.
This commit adds the support to generating a statistics HTML code from
a statistics template.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Add a YearInfo class which represents a year statistics. Export the
class to the Grantlee backend, also export all it's members to the
printing backend.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Show the existing templates based on the print type selected
by the user.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Now there are two types of templates, dive list and statistics.
We need to support reading both types of templates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Preview output should be identical to the actual printing code, so
call the flow rendering method for all flow templates.
Also don't create new pages while rendering a one page preview, just
exit after the first page is full.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
In flow rendering the border width is not initialized which causes
huge borders that blocks the page while previewing.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Add printing description to the user-manual, also add appendix F
which describes how to write a custom template for Subsurface.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
This section of the code is called only while rendering a flow layout
template, so move it to the flow layout function.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Add updated user-manual images, with the new dialog UI.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Template names was capitalized, so change the file name to
"Custom.html" instead of "custom.html"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Add container with height 100% which contains the six dives, so dives
don't overflow the page.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Cmake has a bug that causes the moc process not being handed the necessary
defines for the architecture we are building for.
Also we were missing a library to make the BT implementation on Windows
work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After a replot, check if there is an error message to display.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is nothing to compensate but we would hit a 0/0 numerical
instability there.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Each state can have the same widgets but with different
properties - currently I'm using "enabled" : true and false
for the DiveSiteEdit, it looks like a big amount of code
for such a small thing but it was the cleaner way that
I tougth of doing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added USB usage permissions in manifest.
Also added various FTDI based USB devices in xml/device_filter.xml. When any
device matching the VID and PID provided in the device_filter.xml is attached,
subsurface application is opened automatically. Also, the USB permissions are
granted to the application. This simplifies the USB file generation approach.
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This connects the serial_ftdi implementation to subsurface, and builds
libftdi1 for the android builds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This cleans up serial_ftdi.c from being a libdivecomputer source and
making it into a subsurface custom_serial.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This script is based on serial_posix.c and is primarily meant to work on
android, but could be used elsewhere as well. This script communicates with
libftdi devices connected to the system using libftdi library.
ftdi_read_data returns 0 if no data is received from the device. Allowing to
continue on recieving 0 might end up in an infinite loop. But it works in
OSTC3. This needs to be checked further.
libftdi returns -3 when it could not find any device corresponding to the pid
and vid given. (Different from -3 of libusb which means you do not have
permissions to access the device) Use this to return value to check for other
accepted chipsets including the custom pids used by divecomputer manufacturers
such as Cressi (Leonardo), Suunto and Oceanic.
ftdi_read_data returns the number of bytes read (+ve), 0 when there is no data
to read, and negative when there is an error.
Instead of infinitely waiting for the data to appear, it is better to implement
an exponential backoff which times out after MAX_BACKOFF.
[Anton Lundin: This code was originally intended to be included in
libdivecomputer, but because we now got the custom-serial
patches, its included in subsurface instead, and wired in
from there - renamed the resulting file to serial_ftdi.c]
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rename serial_ftdi.c for subsurface source
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using JNI implementation of QtAndroid, usb file descriptor
of attached ftdi usb device is extracted. This would then
be used for opening usb device on android.
This implementation assumes that permission for usage of
device is already present. This is because of the device_filter
due to which on attaching a recognised usb device (Only ftdi
for now) to android, a dialog pops up asking for permission to
use it with subsurface.
Not an ideal assumption but works sufficiently well.
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes libusb to log straight to the android logging system. This
makes sure we can reach the logs and debug things.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This idea was inspired by:
https://github.com/PointCloudLibrary/mobile/blob/master/3rdparty/android/patches/libusb.patch
The whole thing is re-written from scratch but the idea came from there,
and its a way simpler way of getting a system-opened fd to the right
place than patching every call in the stack to pass a fd down.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
