We want the disclaimer in the final dive that can be printed, but it's
distracting when shown while planning the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise the change to the Cylinder widget would trigger a recreation of
the dive in an inconsistent state.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was introduced in commit fc13361079 ("Don't crash if we try to save
a empty plan") - but it doesn't seem to make any sense. It is perfectly
reasonable for the diveplan to have no datapoints at this spot - we are
just about to call createTemporaryPlan() which will fill those datapoints
from the mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The planner would offer an text-editor if the user double
clicked it's remove column. forbidding that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Besides not deleting them, we shouldn't offer the icon for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch forbids deletion of the Deco Stop from the
QTableView that holds the model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is a little bigger than I usually prefer, but it's all
somewhat interconnected.
- we pass around the cylinders throughout the planning process and as we
create the plan we calculate the gas consumption in every segment and
track this both in the end pressure of the cylinder and over time in
the samples
- because of that we no longer try to calculate the gas consumption after
being done planning; we just use what we calculated along the way
- we also no longer add gases during the planning process - all gases
have to come from the list of cylinders passed in (which makes sense
as we should only use those gases that the user added in the UI or
inherited from a the selected dive (when starting to plan with a dive
already selected)
With this patch I think we are close do being able to move all of the
planning logic back into the planner.c code where it belongs. The one
issue that still bothers me is that we are juggling so many dive
structures and then keep copying content around. It seems like we should
be able to reduce that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to do this when calling plan() from createTemporaryPlan() -
we only want to record the dive at the end of createPlan().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of even trying to keep one around (which then could cause all
kinds of trouble) we now always delete it at the end of the planner.
So simply always recreate one when starting the planner (and make sure
that the staging dive has always been cleared out, first).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we first ADD a dive and then PLAN a dive, stagingDive first was an
alias to the current_dive (for ADD) - we need to make sure that when PLAN
is started, a new dive is allocated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the stagingDive is just an alias for the current_dive (as it is in dive
ADD mode), there's no need to copy the cylinders; they are already there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moved the connections between DivePlannerPointsModel and
MainWindow from inside the Planner class to the MainWindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there was no current dive we didn't set up any cylinder at all which
was a bit awkward as we use AIR but have no cylinder corresponding to it,
which breaks assumptions elsewhere.
Instead we use either the default cylinder or make one up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for some reason the next selected dive is NULL after cancelling the
plan. I'm investigating.
This patch fixes the show of the empty profile and it also untangles
some parts of the code, keeping the mainwindow where it should belong
: the mainwindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were making things way too hard (and were doing things that don't need
doing, like clearing the DivePlanPointModel).
Currently we still crash after manually adding a dive or when canceling
a plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still crashes when canceling the plan.
And doesn't display the correct dive profile until you switch to a
different dive and back.
And Keyboard focus is wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Tomaz suggested, I don't need to pass the information whether we are on
the planner into the function - it's part of the DivePlannerPointsModel
and therefore already knows.
Also, we want to make sure we actually use the gas that's in the first
cylidner of the staging dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still crashes when you abort the plan.
And when you accept the plan, the profile stays stuck in PLAN mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow to both create the full default dive or ownly the descent and bottom
part (so the planner can deal with the ascent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This correctly enables the planner on the new profile,
but it doesn't triggers the correct paint on the canvas.
[Dirk Hohndel: remove other remnants of the disabled planner as well]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas consumption calculation fixed. Pressure difference still needs cylinder size to be set.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use mod calculations on multiple places, so make a separate helper
from it with proper types.
The "clumsiness" of defining a local variable to pass into the function
and out from it comes from the discrepancies in how c and c++ handles
initializations of variables in a struct.
Thanks goes to Tiago and Linus for pointing me in the right direction.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: combined two commits into one and cleaned up some
whitespace issues]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code removed was already ported to the New Profile.
We managed to clean quite a bit. huhhy
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new profile code handles the resizing of the profile area in order to
accomodate the depth and time of the dive much more intuitively - the old
manual buttons to do so are no longer needed.
This also removes a few other unused methods.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is not ported to the new profile, but from what I
can understand from it, it doesn't need to be. The purpose
of this code was to setup the correct colors and strings
for the current mouse position, we already do this on the
Profile in a different way, on the Notification Area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit makes the planner actually work. There ar still
a few edges, but oh, joy - the new Profile gave a very unexpected
and nice addition to it - Grab the last handler of the initial
dive, and move it to the right, or get any handler, and move it
to the bottom to see what I mean.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a itemChange method, that emits a 'changed'
signal when the handler is moved. I'll use that signal on
the profile to call the correct method.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All code that was removed already is working on the New Profile,
The code that's behind #if 0 means that it still needs to be ported and
because of some removal, it was not possible to keep it compiling (mostly
the removal of the Ruler class, that is the Axis, on the new profile).
The rest of the code that's untouched - most probably will keep that way.
The DivePlannerPointsModel is correct and well done, no need to change
that, only the Graphics part.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But it doesn't move the handlers yet, and when you confirm it you also
must click on the dive to select it or the profile will show garbage.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A signal can connect to another signal, so I removed a slot that had the
sole purpose to call another signal and replaced that with a direct call.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That macro was useless, I should have been drunk when I wrote it, and I
don't drink.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way, the user can save dives containing sets of "standard cylinders". Selecting one of those prepopulates the gas list for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For deco stops show the gas of the next segment in the table. In
recalculation remove old deco stops earlier.
In struct diveplan, the items are "segments" with a beginning, a duration,
and a gas. In contrast, the UI of the planner uses "waypoints" which are
the boundaries between segments. It is conventional at least for deco
stops to display the gas of the _next_ segment in the runtime table (i.e.
the gas possibly to be switched to).
Furthermore, in addStop, the old deco stops have to be removed earlier as
otherwise a new waypoint later than a previous generated gas switch
inherits the gas of the old switch.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a manually added dive is saved we cancel the plan. In that process
we throw away the cylinders which triggers a redraw of the profile. Which
tries to access the diveplan and its data points that have already been
freed. BOOM.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This marks a lot of todo's where I think there's core stuff being mangled
on the interface - we should remove this from the interface to make
testing and maintenability easier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rewrite of the actual planner logic. Now ascend to the next potential stop
depth. There the state is cached and we try to ascend to the next stop
depth. If we hit the ceiling while doing that we go back to the cached
state and wait there for a minute. Then we try again. Then loop.
Converted all depth related variables from unsigned int to int. During
planning, in a time step the current depth can temporarily be negative and
comparisons of a negative int with an unsigned it have not the result I
expected ( (int) -2 < (unsigned int) 3 turns out to be false). And we
don’t really need the 32nd bit that unsigned buys us for depths.
Deco stops are now shown in the same table as manually entered stops in
boldface (I removed the second table to save screen estate).
The gas shown in the table is still misleading as it means the gas used on
the segment leading up to that event.
The update of the profile only works partially upon changes in the list of
available gases.
Treatment of various gases is basically there but needs some more love.
The ascent velocity is now provided by a function that takes the current
depth as argument. Currently it always returns 10m/min but that will later
be variable (and hopefully user configurable).
The profile is not redrawn while deco is computed (avoiding an infinite
recursion).
The table got a new column for the duration of a segment while the old
“duration” column was renamed “Runtime” to reflect what it actually shows.
Currently, only the run time but not the duration are editable.
All deco gases are used from the depth where their pO2 is 1.4bar. This
should become more flexible.
Calculation of the pressure drop in cylinders without configured volumes
is suppressed. This solves a problem with the planner crashing when saving
a dive where not all cylinders had been manually given a volume.
[Short rant break: Treating 0/0 as air bites back at so many places. E.g.
Cylinder data is initialized with memsetting the whole structures to 0.
Then later suddenly this totally unconfigured cylinder is being treated as
it would contain air. Maybe at some point this was a feature. But it lead
to a naughty bug which took me over an hour to resolve. We should
seriously reconsider this choice and better move to 209/0 being air if
changing this everywhere is not too much trouble]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Model derived from tableview is expected to have remove slot,
which is missing in DivePlannerDisplay currently. This patch fixes
the annoying warning message while starting Subsurface because of
not including remove slot.
Currently there is lot of work to do, that either requires modifying
the model to skip 'remove' slot or find a way to make them inactive.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently user can edit content in compute waypoints table
(in PLAN mode), ofcourse this does not trigger any calculations in
the code, but user cannot see the content he needs to see after edit.
This patch makes the content uneditable.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Recently Robert Helling provided a patch "Distinguish between entered and
calculated waypoints" in an attempt to distinguish between entered and
calculated stops.
This patch is an independent (content wise) extension of the above
patch and is built relative to it which adds new table to display
computed waypoints in plan mode.
Currently table includes only two columns "Comp. Depth" and "Comp.
Duration", which can extended to show further information.
This is only a start to the UI interaction in PLAN mode.
In addition to this there are many TODO things that diveplan feature
demands
TODO:
1. Show more details through "Computed Waypoints" table.
2. Remove tooltip from "Computed Waypoints" table widget.
3. Make contents in "Computed Waypoints" table widget non-editable.
4. Fix error when trying to save dive plan without using cylinder data.
5. Make dive plan editable after saving it.
6. Improvise dive planner graphics window.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In bf205726 DEPTH/Switch at was disabled by commenting out that code.
This puts it back behind ifdefs
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The selection logic was a bit random: some places would return NULL if
the dive computer index was out of range, others would return the
primary dive computer, and actually moving between dive computers would
just blindly increment and decrement the number.
This always selects the primary computer if the index is out of bounds,
and makes sure we stay in bound when switching beteen dive computers
(but switching between dives can then turn an in-bound number into an
out-of-bounds one)
Fixes#464
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the colors on the new profile, the init of the colors map
was not being done. This fixes it.
A few problems were spotted on the new profile dealing with the ruler
graph and a newly added dive, when using the dive add dialog.
I'll be on it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch partially removes the code for the old profile from
Subsurface. It removes the use of the old profile on the mainwindow,
but keeping the code in the tree for now.
A bit of code-cleanup also entered this commit because I had to change
every instance of the code that used the old profile.
Now to the real code-cleanup
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can't keep the cache around (even though it's tempting) as the next
iteration might change the start time of the planned dive or other
parameters which would make the cached data invalid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decrease depth by tapping left part of widget. Icon is showing "up" (i.e. closer to surface).
Increase depth by tapping right part of widget. Icon is showing "down" (i.e. deeper).
Fixes#354
Signed-off-by: Andrey Zhdanov <andrjufka@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C++ style of accessing single instance class object.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the variable was inside of an inner scope this was technically legal,
but it's just too annoying for words.
(The diff in the commit doesn't make this obvious, but outside the for
loop in the same function there is a divedatapoint *dp, so we had a
pointer to divedatapoint and a divedatapoint with the same name...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I could have gone either way - the other alternative would have been to
remove the argument to the function. But since current_dive is a macro
and since the semantic of the function make sense with the argument being
passed in, it seemed better to just not use current_dive in the function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Move variable members construction to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QList is optimized for storing pointer-sized items, thus
a QVector is the better choice for everything else.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fix for dereferencing a null pointer from me was a bad fix that
broke the possibility of saving a planned dive as a dive.
This is a better fix to not dereference a null pointer and be able to
save the plan again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes sure that the minimum time / depth is
correctly set on the profile planner.
Fixes: #358
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If rowCount() is 0 we get an assert:
ASSERT: "last >= first" in file kernel/qabstractitemmodel.cpp...
To solve that we wrap the beginRemoveRows() call in a bnrach:
if (rowCount() > 0) {
...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Initialize diveplan.dp to NULL, so we know that we will bail in
drawProfile, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Initialize stagingDive to NULL, so we know that we will bail in
createTemporaryPlan, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is so we can default to the GF's from the preferences. We need the
bail handler in createTemporaryPlan, because its triggered when we
change GF's, and if we don't have a stagingDive there, we will access a
NULL-pointer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When got auto-rescaling of the depth scale, always reset the depth scale
to what the profile would suggest. This introduces a concept of user
requested minimum witch we will update and not scale down to lower than.
Reported-by: Henrik Brautaset Aronsen <henrik@synth.no>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we start to define a gas, we should use that one by default instead
of air.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It previously always started with o2 in air, now we start with 0 as its
the same default as in the cylinders too, which fixes a uninitialized
index there too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the scale is too big or too small, adapt the scale automatically.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to add the last sample - the dive plan functions want to
figure out the path to the surface by themselves and get confused by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface creates a lot of singleton instances on demand, but nothing
ever deleted them. Since they are singletons, these memory allocations
are technically not leaks. However, they clutter the output in valgrind
and other memory analysers, hiding the real issues.
The solution is to delete these items at exit. For the models and for
gettextFromC, the solution is to use a QScopedPointer, which will delete
its payload when it gets destroyed. For the dialogs and other widgets,
we can't do that: they need to be deleted before QApplication exits, so
we just set the parent in all of them to the main window.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have allot of helpers, use them instead of local variants.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since all internal units are in mm we needed to only update what's shown
on the interface.
Fixes#299
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit hacky and simply adds the title to the message text when
compiling on a Mac, but hopefully this will be enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better handle the mouse movements on the add dive profile,
when outside of the canvas boundaries. It had bugged me for
quite a while, but this is so much better.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch re-enables gas selection through in the add dive profile.
Good thing ( and I really didn't think of that before ) is that
it is less than half of the code of the other implementation.
:D
Fixes#265
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't take into account that last == first when checking for
the first item on the list. Now the gas is correctly placed on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit removes obsolete code, there was a
gaslist selection when user clicked on the buttons, but
this shouldn't be anymore, since the next commit will
add a menu to select the gas for that particular point.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is about the right size, but the scaling pixelates the icons. So this
is not really a fix, just a hack.
See #269
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the order of the increase / decrease depth button on the planner
since 'bottom' means increase depth and 'top' means decrease. Sorry
I'm too undiver currently :)
See #269
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch is a crude attempt to 'anchor' the bottom of the Dive
ruler editor ( the new graphics ) to the bottom of the scene.
since QGraphicsView doesn't have a good way to modify the origin
point of an item, I'v just shifted all other items up a bit, this
way the 0,0 point is in the bottom of the drawing and I can safely
move it around, making it bottom-anchorable. :D
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This flag is added to all items on the parent, so there's no need
to implement this on all of them.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- get_gas_from_events does NOT always set o2/he. It only updates them IFF
a matching event is found; so we need to make sure we start out with a
valid gas mix
- the way we tried to restore the edited dive in case of an edit to a
manually added that is cancelled was completely bogus. Way too complex
when we can simply and reliably simply store the dive and then copy it
back
Fixes#270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When cancelling the edit of a manually added dive, we should send the
sample with timestamp 0 to addStop - that's a magic value and causes us to
add a node at 5m/15ft and 10 minutes instead. Since the dive always starts
at the surface, calling addStop is redundant, anyway, so let's just not do
that.
See #270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed the ugly icons on the visual profile editor and replaced them with
the much better looking ones that Luisa designed. This was not a simple
search and replace since Luisa's design was a bit more sophisticated.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To our addStop method time = 0 & depth = 0 are a magic flag. And since we
always start at the surface, that is assumed, anyway. So let's just not
add a stop for that when re-creating a plan from a dive.
Fixes#254
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit enables a context menu to remove dive handlers,
because it was hard to find that ctrl+click selected it,
then a delete button press removed it. it's better now. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 0f50b73f9e ("Fix planner / add dive handling of DiveHandler
Points") some issues were introduced. While it is fine to remove the
artificial first point at the surface, the commit broke the special
handling for o2 == -1, i.e., the usual case where a default gas needs to
be picked.
This generalizes the algorithm previously used to also look to the right,
now that we are no longer guaranteed that there is a first point to our
left.
This also cleans up some whitespace damage introduced in the same commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk, is this really necessary or it's just something that you forgot
to remove? this is adding a bit of pain to fix some issues on the planner,
so I'm commenting this out untill you have a bit of time to look at it.
It looks like this was added to handle the gas in the pos-1, but you reverted
if so, this completely reverts it, and things works as expected again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds the first DiveNode at 5m / 10 minutes when clicking on the plus
button on the DiveNotes Table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Somewhere we broke this, most probably in the code that activated the
planner to be used together as an 'add dive'. This commit makes the code
workable again.
There's one thing, though. if the model is empty, this will add something
in the first point - it's behaving strangely. I'll try to fix this in a
way that's invisible to the user, but overall, why are we inserting
something in the first(0,0) time and depth?
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What happened before was that the AirTypes model was only being updated
when the user requested to change the air by clicking directly
on the Air, in the planner ( but not on the Air Table. ).
This fixes it by calling 'repopulate' whenever the cylinder model
changes ( by adding, removing and changing something.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch closes the air list when clicing outside of it,
making the use of the planner more pleasant.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can wire qt to call the right functions directly, so we don't need
these members.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switch to using a QSpinBox instead of a QLineEdit. This makes it a bit
more intuitive and now you can see how the deco plan changes based on
the GF's.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This failed spectacularly when I first tried it, so I put it on the back
burner. And it appears that with all my recent fixes for "add dive" as a
side effect this is working, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. Normally you would expect someone to edit the tank data by
simply clicking on it in the equipment tab. But a user could conceivably
edit the tank data after clicking on the profile editing button instead.
This works now as well.
This also addresses the issue that start and end pressure were not shown
in profile editing mode.
Fixes#235
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed this one spot when converting back to the different semantics for
divedatapoints.
With this change add dive appears to work correctly (fingers crossed).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise adding a second cylinder (to the default one cylinder of air)
and subsequently changing the gas of that cylinder will illogically change
the gas used in all the segments.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- you can no longer delete a tank when its gas is in use
- therefore you can no longer delete the last tank
- when you change the gas mix of a tank, the corresponding segments in the
dive change as well
- when changing gas for a segment the correct available gases are offered
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now hardcoded to AL80. This way in the future we'll have a volume of
gas that's available. And this makes much more sense then a random string
in the description field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the offending commit a QWidget was changed to QTableView, but
only in the header - and thus making avaliable all method calls,
but the initialization of the widgets was still a QWidget, and
nothing of QTableView was used besides an incorrect call to
setColumnHidden.
This commit fixes that by using the view() method provided by the
TableView implementation which returns the true QTableView that should be
used for specific nitpicking, like hidding columns. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that we do the right thing with the staging drive,
that we don't mess up the selection, the we are smart about using our
helper functions, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This partially reverts changes in commit 1b655d5c806b ("Correctly track
gases when manually adding and then editing dives") as it turns out this
did NOT help us correctly track gases (which is ironic, given the title of
that commit). I didn't actually want to revert that commit as
infrastructure has changed since then and this made the patches look even
more incomprehensible.
So we are back to tracking the "gas on which we arrive at this spot" in
each dive plan node as this makes the rest of our planning so much easier
- I had forgotten about the reasons why we did things this way when I made
the above mentioned commit.
Instead we now make sure that our available tanks are added the correct
way, that such entries are ignored when planning and when drawing the
editable profile, and that at the end it all gets assembled correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make the planner work this adds a new column to the Cylinder widget
(depth - for the depth at which we want to change to a certain gas
during deco).
This also tries to hide that column in the equipment view and hide the
start/end pressure columns in the planner view. Oddly that fails :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
