Commit 344d976593 resulted in the start of Subsurface with a map of
the whole world. The user has to zoom in (assuming the case that the
first selected dive has a position), in evenry session. This is solved
by setting the zoomlevel at startup at the default value. Ok, this
results in a map of central London, UK, when starting Subsurface with
a dive without location, but is this as good as any map.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A not perfect improvement, but way better IMHO. Prevent the list of
downloaded dives to grow over the buttons at the bottom. Just a simple
change by adding a bottomMargin to the list.
Notice that there is still some overlap, but for now I consider this a
trade-off between the scarce screen real-estate and the wish to present
and much as possible dowloaded dives.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trip headers spanning more than one line where broken at incorrect
locations in the string. Not exactly sure, but I think this came with
the newest Kirigami SHA, and especially the Label change.
Carefully reading the code for the trip heading shows a "strange"
negative margin. So the margin is on the outside. This margin was
used to split the string, allowing for a small invisible part of
the string to present as trip header.
This is solved by this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This does two main things to the map widget:
- if there are no coordinates, do *not* zoom out to the whole-world
view. Just leave the map alone.
- when zooming out to move to a new dive site, zoom back in to the same
zoom level it was before.
These two changes make it much more pleasant to move between dives,
particularly as you move back-and-forth without losing the zoom level.
NOTE! The zoom level gets reset if you move dives _while_ zooming is
happening, and so moving quickly between dives will still end up losing
the original zoom level, replacing it with a bigger zoom-out that was
active _during_ a previous zoom.
That could be seen as a feature (moving incrementally to an "overview"
zoom when moving quickly between dive sites), but honestly it smells
more like a bug to me. But regardless of that feature/bug, this new
zoom behavior is more pleasant than our older "always reset when
moving".
But it might be a matter of taste, so people should try this out and
comment.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation,org>
Cc: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Again, mostly related to label change. First, the top button was "glued"
to the top of the screen, so added a little margin there. It
appeared that all the other items on the screen (progressbar,
2 button rows, and the downloaded dive list) where not moving down
due to the add of that little top margin. This was solved by
anchor-ing the items together. Finally, the text of a downloaded
dive was on the top of the delegate lines. Not sure where that came
from, but easily solved by centering it explicitly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As in a525fff112, also the dive details top data was not nicely positioned
any more due to the deprecated and removed Kirigami.Label.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The new SHA for Kirigami did all kinds of nasty things to our DiveList.
This commit tries to repair most of the damage. Nothing more than
some margins, anchors, and even a font that changed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commit 8f6827ab12 brought a new SHA for Kirigami, but that introduces
a very noisy logging of "Kirigami.Label is deprecated. Use
QtQuickControls2.Label instead".
So, thats what done here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Before this change, there was only one way to create the local
no cloud repo on the device. The user needed to add at least
one dive to the no cloud account (so that there is something
to save). While this worked in some scenarios, it could also
get things in an inconsistent state: credential status = CS_NOCLOUD
but no local repo. This was a dead end.
In this commit, the creation of the no cloud repo is made more
explicit. When asking for no cloud mode, just create an (empty)
repo for it when it does not yet exist, and otherwise, just
open the existing (possibly empty) repo.
Now, a user can have no cloud repo, next to (any number of)
cloud accounts.
This leaves one functional aspect left: how does a user abandon
the no cloud repo, by merging his data into a true cloud
account. This is code for this, that tries to do this merge in
a smart way. This seems to be broken (too). To be clear: this
is no part of this commit.
Fixes: #667
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It can be difficult to distinguish the new marker
which is added on the map and has to be dragged
when editing a new dive location.
By adding a new grayed-out marker it becomes
possible to gray out all other markers, while
the current marker which is being edited is still
bright red.
Suggested-by: Dietrich Meyer <dietrich@sunnynames.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML map uses MapItemView. MapItemView needs a delagate
in the form of a MapQuickItem. The MapQuickItem needs a
'sourceItem' which would be used as the visual (e.g. marker)
on the map.
If the root sourceItem is of type Item, the marker becomes
non-clickable. If the root sourceItem is an Image, the clicks
work.
This patch removes the root Item, which makes the code
less organized, but at the same time it fixes the bug.
Bug reproduced on the following Qt versions on Ubuntu:
5.5.x, 5.7.x
Bug cannot be reproduced on Qt 5.9.x on Windows.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This commit implements possible switching BT on and off during a session,
so not needing a restart of the app when the user forgot to switch
it on when starting the app.
For this, the following needed to be done: 1) create a handler that
reacts on local BT device status changes. 2) repopulate the connection
list in the download screen when a BT status change is detected.
Notice the subtile change of the Q_INVOKABLE btEnabled() function
to a Q_PROPERTY. This gives a nice dynamic behaviour when
switching BT on/off with the app open.
Fixes: #556
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
If the QML modules for QtLocation and QtPositioning are
missing the QML in mapwidget.cpp will fail to load,
which can lead to crashes.
To solve the issue check if the QML has loaded and set
a flag 'isReady' to true. If the loading has failed
load another QML which is for showing a red error text
in the lines of `MapWidget.qml failed to load!`.
If the map QML has failed, use a macro in all relevant
MapWidget members to turn them into a NOP. This approach
leaves the rest of the codebase intact - e.g. no checks
in classes which connect to the MapWidget class.
Fixes#596
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This commit is empty when shown with '-w' - it just updates the
indentation after commit c00804eff6 ("QML UI: always start edit at top
of page").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When starting to edit / add a dive, the Flickable needs to be positioned
at the top of the page, not the last position shown.
For clarity I'll do the re-indentation in the next commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hard switch was not ideal. This isn't perfect, yet, but a step in
the right direction. The 'transitions' to change the visibility
properties are a bit odd, but that's how it's done in the examples as
well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need a white path drawn on the dark action button, but a black path
drawn for the main menu.
(looks like a white space change snuck in here)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addresses some review comment on whitespace and translated
string formatting.
In the string formatting, a tiny additional change is made.
I wanted the email address in the explanation text in a bold
font. Using the HTML <b> for this, removed the /n newline
characters in the output. Apparantly, mixing these two
formatting styles does not work. No problem, replaced the
/n to HTML style too.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit tries to implement most of issue #515. It reworks the
one credential page, which its dynamic PIN part, into two pages.
Main driver of selecting one of the two pages is the showPin
boolean. Page 1 contains the email/passwd field (and the
option to use a no cloud setup). Page 2 only contains the PIN
part (and the option to cancel the process).
The Kirigami central button does not seem very handy here. We
need, for example, a cancel, sign-in and register, only register,
etc. buttons, which are not easy to handle in specific icons.
Therefore, normal pushbuttons are chosen to deal with user
interaction, and the Kirigami button is removed from these
pages.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Previously, we could edit the cloud credentials in basically two
places. At startup of the app from a fresh install (and no previous
data on the device), and from the settings. Issue #515 proposes
only one way.
However, we need a way to access the new credential UI pages, so
that the pages at a fresh install of the app can be reused,
for example for account switching.
This commit replaces the settings cloud credentials block by
a simple (not editable) display of the current credentials, and
a button to access the initial pages, for all management tasks
on the credentials.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It appears that the onCompleted of the StartPage item is triggered
before the onCompleted of the rootItem. This is logical as the
Startpage is a child of the rootItem. And, yes, this does matter.
As the divelist also contains the logic for initial cloud
registration (and is the default page shown in a state where
the cloud credentials are valid (CS_VERIFIED state)), we need to
know the correct credential state at start of the app.
The move of this one line of code makes sure of that, in addition
to setting the credential state from the preferences. Now, the
setupActions function can reference correct credential data.
This is further preparation for a better cloud creation
process from mobile.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Following on beb0d5703a, the context menu seems to work fine
with a much older QtQuick import - version 2.0.
The 2.7 import is technically a development leftover
and a minimal version should have been considered earlier.
On older Qt setups (e.g. 5.5.x) this might throw a:
'module "QtQuick" version 2.6 is not installed'
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Having two different enums around with more or less the same
definition has lead to unclear code. After removing two not needed
states on the mobile end, the remaining step to one enum for the
credential state becomes almost is simple rename operation.
Unfortunately, I do not know a way to embed a plain C enum
from pref.h into the QMLManager object. So after this, there
are still 2 enums around, but now identical.
This commit is not changing any functionality.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a no-brainer removal of the VALID_EMAIL state used in QMLManager.
All current usage of this state is "if state is VALID or VALID_EMAIL",
so there is no distinction between the two states.
It is even a little different. The comment suggests "when we can open
a local cloud storage, tied to a cloud account (so explicitly not
the no-cloud status), we have at least a valid email". While this
is formally true, this implies that there is also a cloud account
on the cloud server (ie. the cloud account is in a VERIFIED state).
In other words: currently, there can't exist a valid local storage
that is tied to a valid email adress, without valid cloud account
on the server.
Notice that this touches the discussion on GitHub for commit
e76f527fe5 (pull request #520). Can we implement the creation
of a valid cloud account without data link to the cloud server?
Currently, we need the server to confirm the email address (for
example for uniqueness reasons on server side). Obviously, we could
hack our way out of this, but we have a perfect solution already
in place. Create a no-cloud account, and transfer that later to
a true and valid cloud account.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The googlemaps plugin is about to support tile language
via the PluginParameter 'googlemaps.maps.language'.
To be able to pass the subsurface UI language (obtained
from the uiLanguage() helper) the Plugin has to be created
dynamically, only *after* the MapWidgetHelper is created.
MapWidgetHelper::pluginObject() now provides a QString which
contains the Plugin object and also include the uiLanguage
ISO value.
This string is used in mapwidget.qml as:
map.plugin = Qt.createQmlObject(pluginObject, rootItem)
This creates the Plugin object dynamically with the proper
UI language string, but also requires a couple of small changes:
- move the declaration of map.mapType after the
Qt.createQmlObject() call
- assign map.activeMapType after map.mapType has a value
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML Map has a couple of methods - toCoordinate(someQPointF) and
fromCoordinate(someQGeoCoordinate). Ideally, if one passes a point to
toCoordinate() and then attempts to convert the resulted coordinates
back to the point, the same point in the Map view port with minimal error
should be retrieved. That's not always the case - e.g. near
47.400200 -123.142066, which means that the methods are not exactly
*reliable* and there might be Map class bugs at hand.
The new zoom-in and zoom-out improvements try to work around the above:
- for both centerOnRectangle() and centerOnCoordinate(), if no good
zoom-out level is found (newZoomOut), the zoom-out is set to the default
value of defaultZoomOut. In practice, this prevents the case where the map
does not zoom-out at all when going from one place to another
- centerOnRectangle() now uses rectangle diagonals to estimate a fit,
instead of checking if 2 points (top-left and bottom-right) are visible
in the viewport. The usage of fromCoordinate() was giving bad results
in this case and comparing distances (diagonals) is more reliable
but more expensive on the CPU.
Due to the inconsistencies of toCoordinate() and fromCoordinate()
the dynamic zoom-in and zoom-out are still not ideal, but the current
implementation is somewhat usable with decent accuracy.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This appears to fix the mystery crashes that can occur when deleting a dive
from the dive list.
Fixes: #497
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
This gets rid of TypeError messages, but does not appear to affect behaviour
qrc:///qml/DiveDetailsEdit.qml:254: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:228: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:216: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:204: TypeError: Cannot read property 'dive' of null
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
MapWidgetContextMenu now has a new action (SELECT_VISIBLE_LOCATIONS),
that will invoke the MapWidgetHelper method selectVisibleLocations().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
First, this function calculates the zoom out effect until both the
current Map center and the target rectangle are visible - see the
"calculate zoom out" part.
Then it calculates a zoom level, so that the target rectangle
fits the viewport, but also so that the zoom is not too much (clamped).
see the "calculate zoom in" part.
NOTE: "centerStored" (the variable used to store the current map center)
is created using QtPositioning.coordinate(), because the code needs a new
object and not a reference of the map.center QGeoCoordinate object.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add stopZoomAnimations(), which is really just a precaution
function to make sure we have stopped all animation of the
map before doing calculations! Since the animation *should*
be running in a separate thread, this would make sure the Map "center"
and "zoomLevel" properties do not change.
Add pointIsVisible(), which is a helper to determine
if a point created by map.fromCoordinate() method is inside
the viewport. fromCoordinate() has to be called without the
"false" (clip) flag for this to work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
MapWidgetHelper::centerOnDiveSite() now checks if more than
one dive sites are selected and finds the most top-left and
bottom-right ones in the coordinate system to form
a rectangle.
It also supports the special cases where a selected dive site
does not have coordinates or the case where only a single dive site
with GPS coordinates are selected.
TODO: implement mapwidget.qml::centerOnRectangle()
This QML function will receive a QGeoCoordinate based rectangle which
has to be centered in the viewport with animation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
For instance, if the 'googlemaps' geoservices plugin is missing
a new message is now shown:
"qml: MapWidget.qml: cannot find a plugin with the name 'googlemaps'"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Do so until the following issue is resolved:
https://github.com/vladest/googlemaps/issues/9
With the satellite map ([1]), the black tiles at relatively high
zoom levels over the Red Sea cannot be seen. Instead it shows white
tiles at the ultra-maximum zoom level at places.
As a side note, the "satellite" map does not have the country labels
which the "hybrid" map has.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
No idea why this was restricted to be so narrow. Also, making
the font of the label smaller and lighter seems visually more
pleasing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes sure that the autocompleting comboboxes never displays the scroll list where the user can pick an entry, and as such forces the view of a autocompleting textfield from the users point of view. The reasoning is that when scrolling in the drop down list it it possible to scroll to far and thus abort the ongoing edit by flicking away the edit page.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Mobile devices hare rather limited when it comes to screen size,
there is no point in reducing the availabel space more than neccecary.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This handles a cornercase where a user starts editing and then cances the divedit followed by a return to edit mode. The previously acive textfield would then be active again even though all changes are lost.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
For some reason the textfields on dive edit page did not loose focus when editing ended by press on the return key.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When the user makes a selection using the autocomplete function while editing a dive the keyboard should close and the selection list should disappear.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add star icons from the material repository.
https://material.io/icons/
The icons are under Apache License Version 2.0
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This patch makes use of the geolocation plugin "googlemaps"
for Qt Location with source code from here:
https://github.com/vladest/googlemaps
The change from the ESRI plugin is that it requires new indexes
for the Hybrid ([3]) and Street ([0]) map types.
There are more zoom levels in this plugins, but our default zoom-in
settings seem to transition well to it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The C++ side for the desktop version already does that. Add a slot
for that in QML, for later use in the mobile version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The editing support is added via dragging. It is handled via the
MouseArea's drag.target of the MapQuickItem. The drag target changes
with the model selectedUuid.
"mapAnimationZoomIn" now also does an initial zoom-out before moving
to a new location.
centerOnCoordinate() now pefroms calculations to determine how much
the animation needs to zoom out. What it does is it reduces the Map
zoomLevel util both the current and the new target coordinates are visible.
It then restores the zoomLevel and performs animation based on newZoomOut.
animateMapZoomIn() is now obsolete.
The patch also includes the following smaller changes:
- remove the setSelectedUuid() call in deselectMapLocation()
This is now handled in C++
- sets "defaultZoomIn" to 12.0
- use ">=" when determining if a mapItem text should be visible
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapWidgetHelper QML instance now has the slot onEditModeChanged()
which toggles the visiblity of a newly added message box that
notifies the user if editing mode is enabled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Call setSelectedUuid() from C++ also center on coodinates instead
on a MapLocation, as there is no point to pass the MapLocation object
back to QML.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapItemView delegate now includes a white Text element.
It uses the MapLocation "name" property as text.
This text is only visible if the map zoom is above "textVisibleZoom".
For hundreds of dives, using the DropShadow effect for the text
makes it laggy. Instead, using a fake drop shadow (duplicate black
Text under the default text) makes it much better.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The buttons are positioned bellow the "toggle map type" button
and increment / decrement the zoom by "zoomStep" (2 for now).
Also clamp the zoom-in level to "map.maximumZoomLevel".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Double clicking a marker or the newly added MouseArea now performs
a +2 zoom-in over a period of 500ms and centers on that clicked
coordinate.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Different actions might be performed depending on the count of selected
dives - e.g. deep zoom only for a single selected dive.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The signal emits a QList<int> filled with dive idexes from the
main backend dive table.
The MapWidgetHelper QML instance handles that in onSelectedDivesChanged().
This will only be needed for the mobile version, as the desktop version
should connect it's own slot in MapWidget.cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea of this flag is to be able to only to emit the
selectedLocationChanged() signal when the user clicked on the map
(fromClick == true).
MapWidgetHelper::selectedLocationChanged() listens for this signal
and only then it will select nearby dives based on a "small-cicle".
If "fromClick" is false, it's the backend or the dive list that
updated the selection and MapWidgetHelper::selectedLocationChanged()
should no be called.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Each time the zoom changes MapWidgetHelper::calculateSmallCircleRadius()
is called, and the "small circle" radius is stored in both C++ and QML.
On the C++ side this radius will be used to select multiple nearby
dives.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
openLocationInGoogleMaps() now can be used to open a URL in an
external browser, triggered by the context menu. Use the same
Google Maps URL formating as in main.qml showMap().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The actionSelected() signal is now dispatched when the user selects
an action from the menu (see the "actions" object). Then the declaration
of the MapWidgetContextMenu object in mapwidget.qml can catch that
signal in the onActionSelected() slot and obtain the action via
switch() branching.
The actions enumeration is kept in QML for now, with the idea that
specific C++ methods from the mapwidgethelper class will be called
directly (if marked as Q_INVOCABLE), instead of a generic
onMapAction(action) C++ method in the helper. But if the actions
are possible from QML (like copying to clipboard) and are also
small and non-expensive, it might be better to keep them
in mapwidget.qml.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- move the readonly properties near the top of the root Item
- move the rest of the properties bellow the readonly properties
- make the ListView Timer as a child of the ListView
- slight rename of the timer ID
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
NOTES:
- the ListView object uses lsitItemDelagate to display all elements from
the model listModel
- onCountChanged() is used to adjust the x position based on the
maxItemWidth property which is calculated when the items are populated
with text
- onVisibleChanged() is used to deselect the last selected item by
calling listModel.selectedIdx = -1
- onOpacityChanged() i sued to make sure that the View is hidden if the
opacity becomes 0.0
- inside the View there is a MouseAre which obtains the selected item via
indexAt(x,y)
- there is a Timer with id listViewVisibleTimer, which is called each
time the user selects an item from the list and the timer performs a
"delayed hide"
- a couple of State and a Transition objects are used to preform smooth
fade-in / out animation when the ListView is hidden or becomes visible
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This property would act like a state flag. If -1 (default) no QML State
animation will be pefromed, otherwise the ListView will either fade in
(1), or fade out (0) when the user clicks the context menu button
(Image) or selects an item from the list.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The ListView delegate is a simple Component with a parent Rectangle.
It contains a text field with the ListView action.
This patch also defines some properties for the delegate animations
and looks. The property maxItemWidth tracks the width of all item
text, and makes the width of all items be of that value.
The above prevents potential issues when a fixed width item is used
and some translated language string cannot be fit inside of it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Menu item indexes are enumerated in the object menuItemIndex, while
menuItemData, holds an array of objects which will define the number
of items, with indexes (idx) and text (itemText).
When the ListModel is created, it's dynamically populated from
from menuItemData.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The anchor of the menu itself will be positioned near the edge of the
map widget, while the menu contents will have negative coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This QML component will be used to provide a context menu for the
QML map widget. Include the file in QRC and test it's creation
in MapWidget.qml.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Make the "enumeration" local to the Map object for now.
This will possibly break if another plugin is used in place of the
ESRI plugin, but it will simplify the map toggle button which is about
to be implemented next.
If support for multiple plugins is added on runtime a simple
helper function will be needed that will check the current plugin "name".
And return the appropriate supportedMapTypes[X] for e.g. STREET of that
plugin.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML based map will have a toggle in the top left corner to toggle
between the satellite and steet tiles.
The images are created specifically for use in this Qt Location widget
and are free for use in Subsurface.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The animation sequence when deselecting a zoomed in map location, should
be:
- zoom out completely
- pan to center
To achieve that a new animation object is created - "mapAnimationZoomOut"
The previous zoom in animation is renamed to "mapAnimationZoomIn".
The map functions centerOnMapLocation() and deselectMapLocation()
now call the helper functions animateMapZoomIn() and animateMapZoomOut().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
It's best to only animate the flags when clicked, thus play the animation
in the onClicked() slot from the MouseArea.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
To be used to center the map on a dive location or reset the map
if a dive from the dive list doesn't have GPS coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When centering on a map location, use the predefined zoom
map.defaultZoomIn.
Later the map should be able to center on (0, 0) and zoom-out
if a dive doesn't have GPS data.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The rest of the QML code in subsurface doesn't use the ';' to
end a line of code or a declaration. Remove all the redundant ';'.
Also clean extra blank lines.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
If a marker is clicked it's source image changes, which will
call the onSourceChanged() slot. If a marker is selected
play the newly added sourceItemAnimation which is a short scale
animation for the image.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
These properties will be used when zooming-in on a map location
or when zooming out if no map location is selected.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The function in QML centerOnCoordinate() is now renamed
centerOnMapLocation() and accepts a MapLocation object, so that
a marker is selected (based on UUID).
In MapWidgetHelper::centerOnDiveSite(), the pointer to a MapLocation
is retrieved via MapLocationModel::getMapLocationForUuid(). Added in the
previous commit.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add a MouseArea to the MapItemView delagate and onClick set
the "mapHelper.model.selectedUuid" to the uuid of the clicked marker.
This updates the "selectedUuid" property inside MapLocationModel.
Based on "mapHelper.model.selectedUuid" it is now possible to
show two seprate images for selected / deselected markers.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The image for the unselected marker is now a slightly darker flag.
Same behaviour as the current Marble implementation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Rename the QML function "centerOnCoordinates" to "centerOnCoordinate"
and pass a QGeoCoordinate to it in ::centerOnDiveSite().
This will prevent the creation of a QGeoCoordinate object on the
QML side and instead it will be created in C++.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Instead of maintaining a seperate latitude/longitude values
in C++ and passing them to QML separatelly, pass them as a QGeoCoordinate.
This reduces the number of model "roles" and also prevents the creations
of extra objects in QML (e.g. via QtPositioning.coordinate(..)).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
MapItemView is the QML class that handles the "create map markers based
on a model". In this case the model is created as part of the
MapWidgetHelper, so here passing "mapHelper.model" to the "model"
property is enough.
The delegate receives coordinates from the model as "model.latitude",
"model.logitude" and converts them to QGeoCoordinate.
The "sourceItem" image for the delagete is just an image ATM and is
fetched from QRC.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When calling centerOnCoordinates() the map will now animate over a
period of 3 seconds the zoom level and over 2 seconds the center
of the map.
Can be tweaked and improved later on.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This function can be called to center the map on a specific coordinates.
For the C++ version call it via QMetaObject::invokeMethod() in
centerOnDiveSite().
TODO: add QML property animations.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea here is that the Map object can be controlled from C++ via
the "m_map" private member. Also, for the mobile version, QML code can
call the same C++ methods (if marked as Q_INVOCABLE).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This instance in the QML code itself will be accessed by both the
mobile and desktop version. That way, the map code between
the two Subsurface versions will be shared.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add a local "enumeration" (object) for the two possibly map types
of interest: SATELLITE and STREET.
Use SATELLITE by default.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The root element is now an Item and also doesn't have explicit
anchors and dimensions as these will be handled by the parent:
- on desktop: a QQuickWidget
- on mobile: any QML based QQuickItem
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Like the subject says. We do not want the password to be made
visible, so a switch to show it, is useless and is therefore
removed. Futher, the entry mode is set to PasswordEchoOnEdit,
which causes the passwd to be visible (for easy entry), but
can't be made visible again after save/end edit.
Fixes: #512
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Kirigami prevents us from altering the color of the gps icon in the action menu. So let's display an gps fix icon in the lower left corner of the drawer when the location services is running, colored to match the themes primary accent color.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Not the lsit is much more compact and shows a lot more dives even on
smaller screens. And it's similar in style to the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace the theme checkboxes on the settings page
so that we get a unified UI.
These switches are linked and as such can only be activated
deactivation occurs when the user selects another theme.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Move the location services switch to the GPS menu, indicate both with icon and text if the service is active or not.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Strangely, a click/tap anywhere else worked as expected, but if you hit
exactly on the checkbox, the status change wasn't propagated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
