If enabling the notification fails, receiving data packets is not
possible. Instead of silently ignoring this fatal problem and trying to
continue, report the error back to the caller.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
This does two independent things:
It sets the planner state early enough so the appropriate
default profile for the planner is created (without
safety stop).
Upon cancelling the planner, it resets the profile widget
to profile more (rather than planner) as otherwise upon
the next change into the planner the planner model is
not properly initialized.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
To be used on Subsurface merch, this introduces versions
of the Subsurface icon with the program's name and web
address.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The existing logic correctly calculates the minimum (ie, ending) pressure, but not the maximum
(ie starting) pressure.
For example, 2 tanks A and B with manual pressures (same tank on subsequent dives, which were
then merged):
A: 205 - 84
B: 83 - 55
When merging the starting pressures, the call is : merge_pressure(205, 0, 83, 0, false)
The final comparison is:
if(false && 205 < 83) return 205;
else return 83;
-> So 83 is returned even though 205 should have been.
Signed-off-by: Michael Werle <micha@michaelwerle.com>
When events are hidden in the profile, only hide events with the same
name and the same severity (flags).
From discussion in https://github.com/subsurface/libdc/pull/54.
Signed-off-by: Michael Keller <github@ike.ch>
Fix how gases are marked as 'used' and kept from being deleted in the
equipment tab for CCR dives.
It does not make sense to treat the (arbitrary) first gas in the list
with a usage type of 'diluent' or 'oxygen' as 'used' and prevent the
user from deleting it. Dive computers report the initial diluent and
any other diluents used through a 'gaschange' event, so the actually
used diluents are already picked up as part of gaschange event based
logic.
Also clarify the selection of the first diluent used as a default if no
gaschange events exist.
Also fixed the test data - gases that have a pressure change should be
included in the profile if they do not have a gas change recorded
against them by other dive computers, even if they are oxygen.
A secondary problem shown by this is that the pressure change is not
applied to the profile - the pressure is currently shown as constant on
the start pressure. But this is for another pull request.
Signed-off-by: Michael Keller <github@ike.ch>
Include unused tanks in merges of multiple logs into a single dive if
the 'Show unused cylinders' preference is enabled.
Also rename the preference (in code) to `include_unused_tanks` to
reflect the fact that it is already used in more places than just the
display (exporting, cloning dives).
Simplified the cylinder model to make forced inclusion of unused tanks
dependent on use of the model in planner.
Leaving the persisted name of the preference as `display_unused_tanks`
to avoid resetting this for all users - is there a good way to migrate
preference names?
Signed-off-by: Michael Keller <github@ike.ch>
Mark gases that are reported as 'inactive' by the dive computer as 'not
used' in the Equipment tab.
Requires https://github.com/subsurface/libdc/pull/52.
Signed-off-by: Michael Keller <github@ike.ch>
Load the dive computer list in the 'Change Settings on Dive Computer'
dialog dynamically.
Also incorporate suggestions from
https://github.com/subsurface/subsurface/pull/3925#issuecomment-1595784076.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Michael Keller <github@ike.ch>
The conversion between mbar and depth sometimes uses DC's salinity, sometimes user's salinity. By other hand, it uses surface pressure given by user in calculation.
This fix try to standartize this values, using them from same source.
Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
Today salinity combo is editable if one of these rules matches: The dive was manually entered or if salinity edition is allowed in preferences.
However we can have cases that dives were downloaded but its doesn't have salinity info.
This fix considers if there's a DC salinity info to decides combo edition and if salinity change indicator will be showed or not.
If DC doesn't have salinity, the UI behavior is the same of a manual dive
Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
Add an explicit checkbox to the 'cloud auto synch' status toggle in the
mobile 'Dive Management' menu in order to make it more intuitive to
understand.
This isn't super pretty, but I think it will improve the usability. A
prettier way to achieve this will be to redesign the `ic_cloud_off.svg`
/ `ic_cloud_done.svg` in order to make them intuitively recognisable as
unchecked / checked checkboxes.
Example of a support request caused by confusion from the current
implementation: https://groups.google.com/g/subsurface-divelog/c/9X-hTt9NFlE/m/ZcqtdOOhBQAJ
Signed-off-by: Michael Keller <github@ike.ch>
Fix the cylinder pressures in the CSV summary export. Only show
pressures derived from `pressure` attributes in samples for the first
cylinder. Add support for showing pressures derived from `pressure0` ...
`pressureX` attributes.
Also cleaned up unit conversions, and changed tabs to spaces.
From discussion in
https://github.com/subsurface/subsurface/pull/3906#issuecomment-1575980882.
Signed-off-by: Michael Keller <github@ike.ch>
It looks like Qt company has LGPLed versions tagged wich simplifies
things a bit while building, e.g. 5.15.3 current workaround matches
"v5.15.3-lts-lgpl" tag.
Background: Debian Sid is currently at Qt 5.15.8 which is impossible to
build from scratch with current script as only a few git versions are
tagged in the script format "v5.15.8".
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Add a button that allows the user to hide the infobox with statistics
about the point in the dive under the mouse cursor in order to be able
to see the full dive profile unobstructed.
Signed-off-by: Michael Keller <github@ike.ch>
Regroup the file menu entries to give the dynamically generated
'recently opened files' their own section.
Signed-off-by: Michael Keller <github@ike.ch>
Add meaningful error messages when creating a libdivecomputer dump. In
particular show if creating a dump is not supported on the dive computer
that is used.
Signed-off-by: Michael Keller <github@ike.ch>
Use the dive computer / device information that was persisted when
previously downloading dives or configuring the dive computer in the
dive computer configuration dialog.
Also rename 'Connect with bluetooth' and 'Cancel' buttons in the dialog
to make them more consistent with what they do.
Signed-off-by: Michael Keller <github@ike.ch>
The memory management and string concatenation was hard to follow.
Since the mobile files ios.cpp and android.cpp were already
converted to C++, let's do the same for Unix, Windows and MacOS.
Simply store the default directory and filename in a function-level
static string. Thus, it will be initialized on first call and
freed on application exit. Since the std::string data is
guaranteed to be contiguous and zero-terminated, it can be used
from C code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rework of the XSLT used to generate the Summary CSV export:
- fixed a bug causing invalid CSV to be generated for double quotes
(`""`);
- changed quoting and escaping to be compliant with RFC 4180;
- changed output to contain information for all cylinders for all dives
(instead of limiting the number of cylinders to howevermany are used
for the last dive);
- added an index to the cylinder data headings;
- changed unit designators to use `[]` instead of `()`;
- some minor improvements to the XSLT.
Signed-off-by: Michael Keller <github@ike.ch>
Fix the issue that Gradient Factors cannot be set to 100 in the mobile
version. This is done by changing the edits from a text box to a spin
edit, which seems to be a better match for numerical values.
As a side effect this also solves the issue that the keyboard for the
text edit is not properly displayed when settings are opened when dive
details are already on the page stack.
Fixes#3911.
Reported-by: @gbetous
Signed-off-by: Michael Keller <github@ike.ch>
Rework the setting of custom date / time format preferences:
- fix bug causing case changes if custom format case insensitively
matches a drop down entry;
- fix invalid format examples in tooltip;
- update URL for the format documentation;
- add support for quoted literals to the format validity warning.
From discussion in
https://github.com/subsurface/subsurface/issues/3849#issuecomment-1481239270.
Signed-off-by: Michael Keller <github@ike.ch>
Add support for tracking the gas usage across multiple tanks to the 'bar
used' and SAC values shown for the profile ruler.
The following rules are implemented:
- a tank is considered 'used' if at least one bar has been consumed;
- only used tanks are taken into account for calculations;
- 'bar used' is only shown if all tanks used have the same (or unknown)
volume;
- SAC is only shown if all tanks used have a known volume.
Fixes#3902.
Reported-by: @pabdakine
Signed-off-by: Michael Keller <github@ike.ch>
Update libdivecomputer to include the changes from the libdivecomputer
v0.8.0 release:
- Divesoft Freedom and Liberty support
- A couple of iostream abstraction layers: a new 'packet layer' and a
HDLC layer, moving code from low-level dive computer downloaders to
generic iostream layers.
- misc minor updates
Signed-off-by: Michael Keller <github@ike.ch>
Remove `renderSVGIcon()` and `renderSVGIconWidth()`, as QPixmaps can be
loaded directly from SVG, and support scaling.
Signed-off-by: Michael Keller <github@ike.ch>
Use SVG files as source for icons where they exist, and remove the
respective PNG artefacts generated from the SVG files from the
repository.
Signed-off-by: Michael Keller <github@ike.ch>
It's possible for the first sensor to start with a pressure
significantly lower than other sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Not really relevant, because it only affects debugging output.
But shows why I dislike weakly typed, non-compiled languages.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Improve the build instructions for Android. Provide a complete script
for building in a re-usable container.
Also changed the Android packaging README to markdown.
Signed-off-by: Michael Keller <github@ike.ch>
When editing a dive site in the 'Dive sites' view, add a context menu
entry to allow mergeing of the displayed dive site into the dive site
seleted in the 'Near dive sites' list.
This merge has the opposite direction of the existing 'Merge into
current site' function, which can simplify the workflow when maintaining
a large number of dive sites, as the facilities to sort dive sites in
the 'Dive sites' view does not have a way to sort by location or
proximity.
Signed-off-by: Michael Keller <github@ike.ch>
Change the output formato for the Export / 'CSV summary dive details'
from TSV to CSV, to make it consistent with the menu item name, and with
the other 'CSV' export function.
This was changed to TSV by @mturkia in
6c82578540,
but I could not find any discussion as to why.
Also removed replacement of the field separator in any fields, as,
according to the CSV RFC (https://datatracker.ietf.org/doc/html/rfc4180)
this is not required as long as the fields containing separators are
enclosed in quotes, and any quotes within the fields are doubled up.
Tested with a fairly large log file, and importing into Google Sheets is
working fine for the output produced.
Also made capitalisation of the Export menu items consistent.
Signed-off-by: Michael Keller <github@ike.ch>
